Hello ..
When i want to root the phone (galaxy s 2 plus ) whit Odin 307 i get this eror after i loat the md5 .
D:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> CWM-6.4.5_4.2.2_ODIN-s2vep.tar.md5 is invalid.
<OSM> End.
Any idea ho to fix this ..
I had tray to download from other sites and get same eror
Redownload that cwm, or use twrp(goole it),its official snd updated
Related
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VillainROM-SGS2-V1.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
usb degubbing is on
its rooted
but this is al im getting
anybody can help me please?
I tried both mwthods described on XDA and it does't work. Odin reports that md5 hash is invalid (as shown below).
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> PreRooted_SM-T211XXAMGL.tar.md5 is invalid.
<OSM> End...
My tab is sm-t211. Please help!
Hi people.
I have a samsung galaxy SM-J500FN with a strange problem. Recieved from a old lady wich claims she wake up with the phone turned off. When she turned on she couldnt start the phone. So I'm not sure what she did with the phone.
When you turn on the phone you see this;
Odin: flash read failure
Error: There is no pit binary
MMC: mmc_read fail
Movinnd Checksum Confirmation Fail
ddi: mmc_read fail
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: OFF
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWAEV: S1, T1, H1, R1, A1 , P1
SECURE DOWNLOAD: ENABLED
I cant acces the recovery mode. Only the download mode. So odin is recognizes the phone in download mode.
I tried to flash firmware with all versions of odin using only firmware, firmware+pitfile (also tried different pitfiles i found) and some other files. Files names:
runned as admin
AP_J500FNXXU1AOG1_CL698502_QB5554354_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_J500FNXXU1AOG1_CL698502_QB5554354_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_J500FNXXU1AOG1_CL698502_QB5554354_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_DBT_J500FNDBT1AOG3_CL710071_QB5624528_REV00_user_low_ship_MULTI_CERT.tar.md5
J5NLTE_EUR_OPEN.pit
this what i get:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_J500FNXXU1AOG1_CL698502_QB5554354_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_J500FNXXU1AOG1_CL698502_QB5554354_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_DBT_J500FNDBT1AOG3_CL710071_QB5624528_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_J500FNXXU1AOG1_CL698502_QB5554354_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
it takes more than 5 minutes while setupconnection. after i recieve the error message.
I also removed kies from my computer..the same thing happening.
any solutions or idea's?
So i wanted to unbrick some old i9300 but odin recognize him and doesnt want to install ROM on it.I even tried different version,new drivers,different roms,everything.It just says failure.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJSD_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJPY.tar.md5 is valid.
<OSM> CSC_OXXJS6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
It doesnt want to work,can someone help me?
Duke55555 said:
So i wanted to unbrick some old i9300 but odin recognize him and doesnt want to install ROM on it.I even tried different version,new drivers,different roms,everything.It just says failure.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJSD_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJPY.tar.md5 is valid.
<OSM> CSC_OXXJS6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
It doesnt want to work,can someone help me?
Click to expand...
Click to collapse
Greetings and welcome to assit. Have you tried a different version of odin and does kies recognise your phone ? Other than that all i can suggest is asking your question here
http://forum.xda-developers.com/galaxy-s-i9000/help
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to assit. Have you tried a different version of odin and does kies recognise your phone ? Other than that all i can suggest is asking your question here
http://forum.xda-developers.com/galaxy-s-i9000/help
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Yes i did,sorry for delay
I attempted to root my Galaxy S7 (g930T) and something went wrong somewhere....When my phone boots up now it either goes into recovery menu or where it says "Downloading do not turn off target"
I have downloaded MANY ROMS in attempt to just get it to boot into android but no avail. When I try to flash something it says :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_G930TTMB4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont get it. The only thing that I can assume is that the bootloader is locked right? Im so frustrated I have been working on this phone for over 48 hours with no sleep, it's bothering me that bad....
driley6383 said:
I attempted to root my Galaxy S7 (g930T) and something went wrong somewhere....When my phone boots up now it either goes into recovery menu or where it says "Downloading do not turn off target"
I have downloaded MANY ROMS in attempt to just get it to boot into android but no avail. When I try to flash something it says :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_G930TTMB4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont get it. The only thing that I can assume is that the bootloader is locked right? Im so frustrated I have been working on this phone for over 48 hours with no sleep, it's bothering me that bad....
Click to expand...
Click to collapse
Try an official rom from Samsung if it does't work try checking the pit botton
good luck
hope it can help
pippone121263 said:
Try an official rom from Samsung if it does't work try checking the pit botton
good luck
hope it can help
Click to expand...
Click to collapse
download this
https://tinyurl.com/y9fphy53
G930TUVS4BQL2_TMB4BQL2 then odin it, it should bring your phone back to stock
then if you want to root and stuff follow this
https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616