Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VillainROM-SGS2-V1.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
usb degubbing is on
its rooted
but this is al im getting
anybody can help me please?
So I have been trying for hours to get into download mode...and I am in. Before I was getting the repeating galaxy s 4g screen and then nothing. Well I tried to flash kc1 (hawk.zip) and this is what it said.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_T959VUVKG4_CL385158_REV00_user_low_noship.tar.md5 is valid.
<OSM> T959VUVKG4-Phone-CL1037720.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB-VIBRANTP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
it is still in download mode and I am afraid to unplug it because it will take forever to get into it again! what can i do???? please help!
press the reset button on odin and download the KC1 deodexed file from whitehawkx and odin that then just odin back to your desired odin rom
Try downloading this and Odining:
http://forum.xda-developers.com/showthread.php?t=1193751
pammie, one last thing to try if you are going to gb:
http://forum.xda-developers.com/showthread.php?t=1217491
Been trying to root my sprint model Galaxy S6. Been looking this stuff up for cpl days now. Im using the correct CF-Auto-Root file for my model (SM-G920P). Tried a cpl diff versions of Odin and everytime i get this.
Once I load the file into AP, Odin checks the file, then i'll show <OSM>Leave CS..
Then I'll click Start, and it shows- All threads completed. (succeed 0 / failed 0).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zerofltespr-zerofltespr-smg920p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Not sure what to do. Any help is appreciated.
DarkHorse420 said:
Been trying to root my sprint model Galaxy S6. Been looking this stuff up for cpl days now. Im using the correct CF-Auto-Root file for my model (SM-G920P). Tried a cpl diff versions of Odin and everytime i get this.
Once I load the file into AP, Odin checks the file, then i'll show <OSM>Leave CS..
Then I'll click Start, and it shows- All threads completed. (succeed 0 / failed 0).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zerofltespr-zerofltespr-smg920p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Not sure what to do. Any help is appreciated.
Click to expand...
Click to collapse
Try to use an USB port on the back of the computer or a different port in general. Are you in download-mode when you tried this?
I was trying to root my SM-G920F ,which is running Android 6.0.1, when i received the following message on Odin3.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
the phone was in download mode (Odin) and the developer option is On as it is the case with USB debugging, also the reactivation lock is off.
Android version : 6.0.1
Baseband version : G920FXXU4DPI9
Kernel Version : 3.10.61-8821257 Sep 16 2016
Build Number MMB29K.G920FXXU4DPIL
KNOX Version : KNOX 2.6
ANY help will be appreciated.
CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5
Click to expand...
Click to collapse
You're trying to flash wrong file. Try this;
https://download.chainfire.eu/733/CF-Root/CF-Auto-Root/CF-Auto-Root-zeroflte-zerofltexx-smg920f.zip
boogiesamy said:
did you tried it with cf autoroot? make sure you also have enabled oem unlock in developers options, if still not work try to flash an older firmware in phone
Click to expand...
Click to collapse
I'm couln't find "OEM UNLOCK" anywhere
forumber2 said:
You're trying to flash wrong file. Try this;
....
Click to expand...
Click to collapse
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
No luck
boogiesamy said:
Just flash this firmware version: https://drive.google.com/file/d/0BzcqBQZhElPfZ0lhcHR2RmdRUFk/view?usp=drivesdk
After flash hard reset, then try to root with cf autoroot again
Click to expand...
Click to collapse
Can you please point me to a guide ?
emGiin said:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
No luck
Click to expand...
Click to collapse
You're trying to do it with in-built (comes with autoroot) Odin, right?
If you do, there's something wrong on drivers, usb cable or you don't put it to download mode.
forumber2 said:
You're trying to do it with in-built (comes with autoroot) Odin, right?
If you do, there's something wrong on drivers, usb cable or you don't put it to download mode.
Click to expand...
Click to collapse
Yes i was using the in-built Odin and the phone was in download mode, i'll try another usb cable.
@boogiesamy @forumber2
I Installed the drivers from the link provided by @boogiesamy and tried to root it again, and it worked.
Thank you so much guys
@boogiesamy @forumber2
I Installed the drivers from the link provided by @boogiesamy and tried to root it again, and it worked.
Thank you so much guys
boogiesamy said:
Use this step by step guide on flashing full firmware https://simunlockremote.com/how-to-flash-using-odin/
Click to expand...
Click to collapse
It's not related the installed firmware.
I attempted to root my Galaxy S7 (g930T) and something went wrong somewhere....When my phone boots up now it either goes into recovery menu or where it says "Downloading do not turn off target"
I have downloaded MANY ROMS in attempt to just get it to boot into android but no avail. When I try to flash something it says :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_G930TTMB4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont get it. The only thing that I can assume is that the bootloader is locked right? Im so frustrated I have been working on this phone for over 48 hours with no sleep, it's bothering me that bad....
driley6383 said:
I attempted to root my Galaxy S7 (g930T) and something went wrong somewhere....When my phone boots up now it either goes into recovery menu or where it says "Downloading do not turn off target"
I have downloaded MANY ROMS in attempt to just get it to boot into android but no avail. When I try to flash something it says :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_G930TTMB4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont get it. The only thing that I can assume is that the bootloader is locked right? Im so frustrated I have been working on this phone for over 48 hours with no sleep, it's bothering me that bad....
Click to expand...
Click to collapse
Try an official rom from Samsung if it does't work try checking the pit botton
good luck
hope it can help
pippone121263 said:
Try an official rom from Samsung if it does't work try checking the pit botton
good luck
hope it can help
Click to expand...
Click to collapse
download this
https://tinyurl.com/y9fphy53
G930TUVS4BQL2_TMB4BQL2 then odin it, it should bring your phone back to stock
then if you want to root and stuff follow this
https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616