Database Info

[Q] Is anyone out there...I am finally in download mode...what now?

So I have been trying for hours to get into download mode...and I am in. Before I was getting the repeating galaxy s 4g screen and then nothing. Well I tried to flash kc1 (hawk.zip) and this is what it said.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_T959VUVKG4_CL385158_REV00_user_low_noship.tar.md5 is valid.
<OSM> T959VUVKG4-Phone-CL1037720.tar.md5 is valid.
<OSM> SGH-T959V-CSC-TMB-VIBRANTP.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
it is still in download mode and I am afraid to unplug it because it will take forever to get into it again! what can i do???? please help!

press the reset button on odin and download the KC1 deodexed file from whitehawkx and odin that then just odin back to your desired odin rom

Try downloading this and Odining:
http://forum.xda-developers.com/showthread.php?t=1193751

pammie, one last thing to try if you are going to gb:
http://forum.xda-developers.com/showthread.php?t=1217491

Problem rooting with ODIN?

Been trying to root my sprint model Galaxy S6. Been looking this stuff up for cpl days now. Im using the correct CF-Auto-Root file for my model (SM-G920P). Tried a cpl diff versions of Odin and everytime i get this.
Once I load the file into AP, Odin checks the file, then i'll show <OSM>Leave CS..
Then I'll click Start, and it shows- All threads completed. (succeed 0 / failed 0).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zerofltespr-zerofltespr-smg920p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Not sure what to do. Any help is appreciated.

DarkHorse420 said:
Been trying to root my sprint model Galaxy S6. Been looking this stuff up for cpl days now. Im using the correct CF-Auto-Root file for my model (SM-G920P). Tried a cpl diff versions of Odin and everytime i get this.
Once I load the file into AP, Odin checks the file, then i'll show <OSM>Leave CS..
Then I'll click Start, and it shows- All threads completed. (succeed 0 / failed 0).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zerofltespr-zerofltespr-smg920p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Not sure what to do. Any help is appreciated.
Click to expand...
Click to collapse
Try to use an USB port on the back of the computer or a different port in general. Are you in download-mode when you tried this?

[Completed] Samsung Galaxy S1 I93000 [HELP]

So i wanted to unbrick some old i9300 but odin recognize him and doesnt want to install ROM on it.I even tried different version,new drivers,different roms,everything.It just says failure.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJSD_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJPY.tar.md5 is valid.
<OSM> CSC_OXXJS6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
It doesnt want to work,can someone help me?

Duke55555 said:
So i wanted to unbrick some old i9300 but odin recognize him and doesnt want to install ROM on it.I even tried different version,new drivers,different roms,everything.It just says failure.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJSD_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJPY.tar.md5 is valid.
<OSM> CSC_OXXJS6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
It doesnt want to work,can someone help me?
Click to expand...
Click to collapse
Greetings and welcome to assit. Have you tried a different version of odin and does kies recognise your phone ? Other than that all i can suggest is asking your question here
http://forum.xda-developers.com/galaxy-s-i9000/help
Good Luck
Sawdoctor

sawdoctor said:
Greetings and welcome to assit. Have you tried a different version of odin and does kies recognise your phone ? Other than that all i can suggest is asking your question here
http://forum.xda-developers.com/galaxy-s-i9000/help
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Yes i did,sorry for delay

Fixing Android S7 (SM-G930A) Bootloop

Hi there, as you can tell from the title, my phone is stuck in a bootloop at the AT&T symbol and keeps vibrating in about 15 second increments. I tried flashing the stock ROM to the phone, but every time that I flash all the files attained from https://forum.xda-developers.com/verizon-galaxy-s7/how-to/how-to-notes-root-install-xposed-unroot-t3411039 . Under the ATT_G930AUCS2APF2.zip file. I extract it and get all 4 files in which I have to use ODIN to flash. I load all of them in ODIN and I whenever I try running it, it fails. This is the log
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm running ODIN in administrator, I'm on Windows 10 and I've used both Prince Cozmy ODIN and the regular 3.1.2 release.
Any help in getting it out of the boot loop would be greatly appreciated.

Unlocking Bootloader?

I attempted to root my Galaxy S7 (g930T) and something went wrong somewhere....When my phone boots up now it either goes into recovery menu or where it says "Downloading do not turn off target"
I have downloaded MANY ROMS in attempt to just get it to boot into android but no avail. When I try to flash something it says :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_G930TTMB4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont get it. The only thing that I can assume is that the bootloader is locked right? Im so frustrated I have been working on this phone for over 48 hours with no sleep, it's bothering me that bad....

driley6383 said:
I attempted to root my Galaxy S7 (g930T) and something went wrong somewhere....When my phone boots up now it either goes into recovery menu or where it says "Downloading do not turn off target"
I have downloaded MANY ROMS in attempt to just get it to boot into android but no avail. When I try to flash something it says :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_G930TTMB4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G930TUVS4BQL2_CL12142063_QB16000831_REV02_user_low_ship_MULTI_CERT_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont get it. The only thing that I can assume is that the bootloader is locked right? Im so frustrated I have been working on this phone for over 48 hours with no sleep, it's bothering me that bad....
Click to expand...
Click to collapse
Try an official rom from Samsung if it does't work try checking the pit botton
good luck
hope it can help

pippone121263 said:
Try an official rom from Samsung if it does't work try checking the pit botton
good luck
hope it can help
Click to expand...
Click to collapse
download this
https://tinyurl.com/y9fphy53
G930TUVS4BQL2_TMB4BQL2 then odin it, it should bring your phone back to stock
then if you want to root and stuff follow this
https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616