Hi I need your help. I am a owner of hummer h5 mtk6572 phone
I have a very strange problem. My phone freeze after that I can't do anything
I pull out the battery and insert it again but my phone is death
No power no screen. After that I flash it with spflash tool, the phone boot up
After some hours the phone freeze again. I have no other choice I flash it again
I have try all different firmware and stock too I have same problem
Can anyone help of to find the problem and solve it thanks
May be these problems comes from hardware...
@sokolataki, sounds to me like a very faulty device. Ask for a replacement if you still can; otherwise, just get a new phone.
Related
Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
phone help
dnchandana said:
Dear Sir
iam changing my phone sim 3times continue.
after that iam restarting my phone.
buy my phone hanged at samsung first screen,
after i am updating firm ware using odin.
but my phone not turn on.that is sucked at android factory reset window.
the error is cant unmount sdcard...etc
my phone model is samsung si9003
plz can you help me about my phone how to turn on as usual.
plz suggest me about upgrading.
or give any solution for me plz
Click to expand...
Click to collapse
It is very hard to understand what your exact problem is, I can suggest a Galaxy III for an upgrade. As far as your current phone...
I;m sure someone out there has had a problem close to yours, try YouTube and Google searching as well as educating yourself here (XDA) on anything related to your phone or similar problems.
You might find the info. you need in an unrelated post or video! Check your pins to see if they are worn or possibly broken (connections). Ensure that you are getting a clean and solid connection.
Good luck
Hi, I have a big problem with my new Phone Feiteng H7100! After I flashed the ROM (from needrom), nothing happens on the phone! Everything went as described until the green circle. Nothing now … when connected to the PC appears a USB / network device name: Alcatel Single RNDIS interface, nothing more happens.
Can someone help me here? Please
jemmars
Hello everyone,
can anyone help me here really? I've also, quite diligently search through the forums for possible solutions, but I have not found anything. Please, please help me with my phone ... where I still have birthday ... your help I would be today's greatest gift!
Did you tried to reflash with another ROM?
Maybe this will help you: http://forum.xda-developers.com/showthread.php?t=2186116
Please post your experience.
hi, can anyone help me, i have a feiteng h7100, totally bricked, not turn it on, the computer dont recognize, is a dead phone, i flash it with sp flashtool first time says ok, but no turn it on, so i flash it again, in the middle of flashing says error and the cpu dont recognize any more my phone, any ideas..
never flash DSP_BL and preloader. as long as the device is recognized on your PC, its not "dead" othewise you can try the "testpoint" methode, but not all motherboards have one.
Hi there,
I am using a Q8H 2014 02 20 A23 Allwinter tablet. This tablet has pretty bad battery issues so I have looked to swap the battery with one from my older tablet (this doesn't fit its far to big) however my issue before and after replacing the battery is the OS would constantly reboot as soon as I got to the homescreen I litterally get 1minute into it then it reboots again. Have already tried to factory reset and it sits there with the dead android logo guy and does nothing.
I am wanting to know if this indeed a OS issue if so how can I fix it I have had a search on the net trying to find the ROM file for this model but I am unable to find what I require, I saw when it goes into recovery that I can grab a rom via SD card if I am not mistaken.
Is it possible for someone to help me with the rom file I require and able to tell me if this will fix my issue??
Thanks for your help in advance.
Regards,
Time Bandit
Apologies if I have put this in the wrong place.
After I flash a rom, my phone wont turn on but when i plug in my charger my phone will charge.
Please help me.
Phone: ALCATEL ONE TOUCH 4030e
Rooted
Hi,
Better to revert to stock rom on your device. At least to recover a working device
Either your custom rom file were corrupted, or not for your device.
maybe my reply is out topic, my phone has got looping error , sysmtemui , acore has stopped!. I factory reset my phone but nothing happen the error are still there. I reflash my rom the error is still there.
I use Alcatel One Touch Upgrade I finish all step but nothing happen the error are still there.
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal