Instructions for the Surftab Breeze 7:
In this case it's really easy to get the tab rooted. It already has the su binary installed Get SuperSU from market and let it do the rest.
Instructions for the Surftab Ventos 8:
Big news!
I made it to make another rooting method without the use of any 3rd party software!
It's also not important which OS you are using.
Pre-requisites:
Get a Micro SD card! (up to 8GB as it seems that more than 8GB cannot be used to activate CWM)
Instructions:
1. Get my custom clockworkmod recovery zip from this thread: http://forum.xda-developers.com/showthread.php?t=1995984
2. Unpack the zip file on the root of your micro SD card (there has to be a file named uImage_recovery now)
3. Download the attached signed_SU.zip file and put it either on your internal or external SD (do NOT unpack it)
4. Shutdown your Tab
5. Keep Volume- pressed and tap the power button (while still keeping the Volume- pressed) until you see the clockworkmod menu
6. Choose "install zip from sdcard"
7. Depending on the fact where you have the zip stored, select either the internal or external card
8. Select the zip and confirm its installation with "Yes"
9. After the script finished, hit reboot and check if you have SuperSU installed
This should be it
To do:
I'll make a new thread helping in installing the Playstore without having to root our ventos tablets.
After the tablet rebooted twice you should see SuperSU now as installed application. Now you just need a working play store apk and move it into the system partition (don't forget chmod to 644) to get the Play store running.
Instructions for the Surftab Ventos 9.7:
As I don't have anyone with a rooted 9.7 at the moment (to get a dump of the stock recovery), I can't make a working CWM to get the below signed_SU.zip flashed, sorry! Only the old rooting method listed below only works at the moment (if moborobo is in a good mood )...
As usual I don't take any responsibility for bricked devices (but I assume that the chances of bricking are nearly impossible)
If you have any questions, let me know!
Old Rooting method:
Code:
Hi,
I know, many of you don't know these tables at all. But as far as I know, these are only available in Germany at the moment.
Anyways, I think it is helpful for my German colleagues to know how to root these tablets as they don't need to search for hours and hours until finding a solution that is suitable (as I did :-/ ).
The Windows way:
Pre-requisites:
0. A Windows PC
1. Download Moborobo ([URL]http://www.moborobo.com/download/[/URL])
2. Install any Updates Moborobo needs to install
3. Download the latest release of bin4ry's universal rooting for most ICS and JB phones/tablets ([URL]http://forum.xda-developers.com/showthread.php?t=1886460[/URL])
Thanks to bin4ry by the way :)
4. Download my modded Runme.bat
Instructions:
1. Unpack the 7z Archive from point 3 into Moborobo's installation folder. The result should be that you have a new folder "stuff" and a runme.bat and runme.sh in the Moborobo folder
2. IMPORTANT: Unpack my modded runme.bat into the MoboRobo folder and delete the original batch file
3. Start Moborobo and ignore any exceptions which are thrown out (at least my Visual Studio nagged me all the time, and no, I wasn't willing to debug the application :p )
4. Connect the Tablet to the PC and wait until Moborobo says that it is connected
5. Then start the modded Runme.bat and follow the instructions (select the first option by the way, which says "Normal")
6. Watch the screen, you need to click on Restore on your tablet (without any passwords)
7. See the magic happen
The Linux way:
Here is the feedback of an owner of a Trekstor Ventos 9.7:
[QUOTE]
Hi,
[...]
I am using Linux (old Fedora 15), I used Root_with_Restore_by_Bin4ry_v15.zip without any modifications to root the device. I ran the unix shell script that is provided in the package and selected option 1 for rooting, just as you suggested. I did not really understand why you needed the mobo tool, Bin4ry's script seems to work out of the box.
After that I installed SuperUser with latest busybox, terminal app and a console version of openssh, all that also works just fine.
I did not try Google Play or any other market, I use the device without a Google account, so I actually removed the preinstalled AndroidPit market and got rid of everything that wanted to collect my personal data.
I hope some day I can post in the thread but right now I do not see anything else where I could participate to gather those annoying 10 posts.
Again, thanks for your initial walkthrough, it gave me the hints I needed.
Kind regards,
Jin
[/QUOTE]
Regards
TheSSJ
DOES the Play Store work on your device???
All other sources on the net say that the Play Store is not possible on the device...
Gesendet von meinem Nexus 7 mit Tapatalk 2
Yes,it works. but only if you root your tablet. Also it's important to move the playstore.apk into the system partition...DON'T INSTALL IT like a normal apk...
Then reboot and you're done..if you need help pm me..
Can confirm that this method is also working with the 7" Breeze. Moborobo was not able to recognize the device, but manual install of a ADB driver for the Breeze showing as non-working "Android" in the system settings device table enabled it to see it. From there rooting was indeed a "breeze" Play Store and USB devices on host working fine. Great job, thanks for sharing!
Lucas0511 said:
Can confirm that this method is also working with the 7" Breeze. Moborobo was not able to recognize the device, but manual install of a ADB driver for the Breeze showing as non-working "Android" in the system settings device table enabled it to see it. From there rooting was indeed a "breeze" Play Store and USB devices on host working fine. Great job, thanks for sharing!
Click to expand...
Click to collapse
Oh this sounds good...I was searching for a method to manually install the adb driver for our tablets...can you share how you did this? it sucks having moborobo always running for a little adb work...
I had ADB installed previously with the latest Android SDK as fastboot was acting up on my Win 8-64bit. So the devices manager in settings was already showing a not properly installed Android USB device. I changed the USB connection on the Breeze to "MTP" , and in the computer device list chose to update the driver for this USB device manually - and then chose to search computer for drivers. Under Android USB devices I chose Android ADB Interace (Google ADB driver 7.0.0.1 previously installed with the SDK) - and was able to see the device as ST70104-1413fc082 with "adb devices" from the computer. Its funny, we both speak German, trying to explain in English... . Hope it helps.
Yes,indeed funny
Thank you for your explanations..if i get adb to work too i will update my guide
Thanks again
Edit: doesn't work unfortunately but i heard that on Linux it isn't a problem to get adb running properly...
didnt work for me
hi
I just saw this post and tries doing s instructed but:
1-couldnt get into recovery mode ! I tried the volume down button but it would boot the tab into safe mode
2-tried volume up button but it goes to a black download mode screen and restarts.
3-tried the other method through Moborobo but that didnt work either , it tells me it succeeded but there is no root.
by the way I have the 8" on Jellybean
I just want a way to make more space or install aps on my SD card
Has anyone successfully rooted a Trekstore Surftab Ventos 7.0 HD with some of the above mentioned methods? I've tried both bit without success....
The reason for me wanting to root is to get Tasker running on it. It depends on some google maps framework. The 7.0 HD has playstore and maps but i suppose something is missing and I have to root to get the missing files.
If anyone has some advice I'll be very glad. Cheers
Sent from my GT-I9300 using Tapatalk
Is there a difference between the ventos 7 and the ventos 7 breeze? And are there any KitKat ROMs available?
In this post I will teach you how to make your own scatter file
Requirements:
1. Mtk device
2. PC or laptop
3. MTKdroid tools
Procedure:
1. From your android device, enable USB debugging
For that go to ->Settings ->Developer options
2. Connect your android device to you
computer via USB cable. Drivers must be
Installed in your system.
3. From your computer, run MTKdroid
application as administrator (except for
Windows XP).
4. Wait for MTK Droid Tools to load your
android device's info. Just wait few
seconds.
5. If the tool is done loading your device,
click on Blocks Map
6. A new window will appear, click on Create scatter file
7. Now, navigate to where do you want to
save the scatter file of your device. Save
it to somewhere safe because it can be
used for future flashing.
8. Now you are Done..
Enjoy flashing..
Hit thanks button if this post helped you
hi
i have iris alfa rooted
i want to install stock rom which needs scatter file
now if i create a scatter file with the above steps, would it be the same as the stock scatter file
Hello , after alot of research online I've managed to come up with a way to unbrick my hard bricked device Sky IM-A770K in qhsusb_dload mode with dead boot ,without having to send it to those jtag/medusa services with the help of some methods i found on some vietnames websites . Ok so before we begin I hold no responsibility for the damage that you're device gets so follow the steps exactly as I say .
So this is the ultimate guide to unbrick your IM-A770K or IM-A760S device from qhs_usbdload. :fingers-crossed:
Note : This guide works only for devices stuck in QHS_usbdload mode.(No boot)
(Note: in the links remove blank spaces.)
Note windows 7 is recommended OS to have on this guide :
1. Download the attached files in the link at the end of thread.
1.5.Open cmd in administrator mode and type
Code:
bcdedit /set {globalsettings} advancedoptions true
1.6.Restart Pc and disable driver signature enforcement.
2. Connect sky im a770k to pc with usb.
3. Open device manager. Device should should show as qhsusb_dload.
4.Click on device and click update driver browse for the files qhs_usbdload and chose the driver accordingly to 32bit or 64bit system.
5.Once drivers installed the device should show as Qualcomm Usb Diagnostic 9006 (COMx)(Note: x stands for the number of the port of your device that your pc shows).
6.Install qpst.
7.Open Qpst Configuration , Select Ports->Add New Port -> Select (COMx) of your phone you can check it at device manager.
8.Close. Open emmc Software download.
9. Check the image 'emmc Software download' in the files i've provided for configuration click download.
10. Now your device should show as Qualcom cdma technologies msm in device manager.
10.5 Click on it Update Drivers browse for file select the drivers from the files that i've provided you with . Its qualcom cdma technologies.
10.6.Now you'r device should show in device manager as qualcom diagnostic mode 9025 or 9008.
11. If asked do not format. If device boots up do not attempt the following.You've fixed it . If not continue with below steps.
12.This is the hard part you should be careful with this could damage your internal emmc partitions permanently.
13. Install winHex from winhex folder.
14.Open winhex as administrator.
14.5.Warning this step is for sky im a770k or 760s only if you have another device please do not attempt it as you may damage emmc(sdcard) permanently. Thank You.
15. Select File->Restore Image->Browse to the downloaded files of my guide(Change File type to .01,.img,etc)->Select unbrick770k760s.img. Open.
16. Select Kind of image: Disk.
17.Select Target Disk At Logical Volumes /Partitions Your device should show as qualcom msm 14.9gb (something like that) chose it. WARNING do not chose other drives as they could be damaged.
18. Click ok . And wait till it's finished.
19. Your device should boot up If you followed the steps correctly.
20.Hope this fixes it.
Next all you have to do is flash firmware offline check out this guy do as he does.Or you can google other ways:
htt ps://ww w.you tube.com/watch?v=uDsOm orfp0I
Again I do not hold responsibility for all the above steps . It worked for me maybe it'll work for you or your device could be damaged more who knows so do this on your own risk. If you chose to do this be sure to install the drivers properly. Research on how to install them if you're having trouble doing it .If this methods doesn't work for you keep researching online maybe you'll find a way.It took me a week of research before i could come up with this. For any questions you have you can ask me.
Thank you And Good Luck! :good:
Download Files:
htt ps://drive.go ogle.com/file/d/0B4r0yxK Mlkspa FQ5 cE1QUzR ObDA/view ?usp=sharing
Hello Sir,
Congratulations on unbricking phone. I am having similar problem with my IM-A860L and I am not able to find appropriate files for my device. Can you please help? I have also opened a help thread here: https://forum.xda-developers.com/general/help/help-bricked-im-a860l-pantech-vega-6-t3639621
Please help!
help needed
Aster95 said:
Hello , after alot of research online I've managed to come up with a way to unbrick my hard bricked device Sky IM-A770K in qhsusb_dload mode with dead boot ,without having to send it to those jtag/medusa services with the help of some methods i found on some vietnames websites . Ok so before we begin I hold no responsibility for the damage that you're device gets so follow the steps exactly as I say .
So this is the ultimate guide to unbrick your IM-A770K or IM-A760S device from qhs_usbdload. :fingers-crossed:
Note : This guide works only for devices stuck in QHS_usbdload mode.(No boot)
(Note: in the links remove blank spaces.)
Note windows 7 is recommended OS to have on this guide :
1. Download the attached files in the link at the end of thread.
1.5.Open cmd in administrator mode and type
Code:
bcdedit /set {globalsettings} advancedoptions true
1.6.Restart Pc and disable driver signature enforcement.
2. Connect sky im a770k to pc with usb.
3. Open device manager. Device should should show as qhsusb_dload.
4.Click on device and click update driver browse for the files qhs_usbdload and chose the driver accordingly to 32bit or 64bit system.
5.Once drivers installed the device should show as Qualcomm Usb Diagnostic 9006 (COMx)(Note: x stands for the number of the port of your device that your pc shows).
6.Install qpst.
7.Open Qpst Configuration , Select Ports->Add New Port -> Select (COMx) of your phone you can check it at device manager.
8.Close. Open emmc Software download.
9. Check the image 'emmc Software download' in the files i've provided for configuration click download.
10. Now your device should show as Qualcom cdma technologies msm in device manager.
10.5 Click on it Update Drivers browse for file select the drivers from the files that i've provided you with . Its qualcom cdma technologies.
10.6.Now you'r device should show in device manager as qualcom diagnostic mode 9025 or 9008.
11. If asked do not format. If device boots up do not attempt the following.You've fixed it . If not continue with below steps.
12.This is the hard part you should be careful with this could damage your internal emmc partitions permanently.
13. Install winHex from winhex folder.
14.Open winhex as administrator.
14.5.Warning this step is for sky im a770k or 760s only if you have another device please do not attempt it as you may damage emmc(sdcard) permanently. Thank You.
15. Select File->Restore Image->Browse to the downloaded files of my guide(Change File type to .01,.img,etc)->Select unbrick770k760s.img. Open.
16. Select Kind of image: Disk.
17.Select Target Disk At Logical Volumes /Partitions Your device should show as qualcom msm 14.9gb (something like that) chose it. WARNING do not chose other drives as they could be damaged.
18. Click ok . And wait till it's finished.
19. Your device should boot up If you followed the steps correctly.
20.Hope this fixes it.
Next all you have to do is flash firmware offline check out this guy do as he does.Or you can google other ways:
htt ps://ww w.you tube.com/watch?v=uDsOm orfp0I
Again I do not hold responsibility for all the above steps . It worked for me maybe it'll work for you or your device could be damaged more who knows so do this on your own risk. If you chose to do this be sure to install the drivers properly. Research on how to install them if you're having trouble doing it .If this methods doesn't work for you keep researching online maybe you'll find a way.It took me a week of research before i could come up with this. For any questions you have you can ask me.
Thank you And Good Luck! :good:
Download Files:
htt ps://drive.go ogle.com/file/d/0B4r0yxK Mlkspa FQ5 cE1QUzR ObDA/view ?usp=sharing
Click to expand...
Click to collapse
please can you give me the Korean site addresses i want A870L Qpts files in .hex and mnf files.
if you can provide please help me in this matter
I have created a small WINDOWS based application(APK Installer) which is capable of installing multiple APK file on your Unrooted or Rooted Android Device in single click.
System Requirements:
> Android SDK or you can also use Minimal ADB and Fastboot by shimp208
> JAVA 1.4.0 and further
> Less than 1 MB space
> Windows operating system
Steps:
1] Download APKInstaller developed by me from the link given below
2] Enable Developers Option in your Android Phone.
3] Enable USB Debugging in your phone.
4] Connect your phone to the PC using Data cable.
5] Click on the APKInstaller.exe file which you downloaded.
6] Give path of Android SDK Directory (for example : C:\androidsdkplatform-tools).
7] Click on Select APK button.
8] Select all the APK files you want to Install.
9] CMD window will popup and it will install all the APK Files one by one.
Download Link: Google Drive
If you find any buy or any problem in using this application dont forget to report it and if you need any help kindly post it in comments.
Thank you.
**Hit Thank Button If You Think I Helped**
I am trying to use Android Studios to Flash a custom OS onto my Razer 2.
The Razer does not connect to Wi-fi and does not have a sim card inside, so I am trying to use a workaround for the Playstore and install the CPU app to retrieve the correct Platform information from my phone. This way I can download the right Gapps File (ARM or ARM x64). and load TWERP so I can flash the ROM.
So:
1. Install Zip Archive App on Razer 2 Via android studios
2. Install CPU APK on Razer 2 Via SDK Toolkit and use Zip app on Razer to extract APK and fully install CPU on Razer
3. Check Razer Processor Architecture (ARM or ARM x64)
4. Install Gapps file and ROM
5. Boot in recovery mode and boot up TWERP
6. Use Twerp to wipe phone and install ROM and Gapps
Is there a guide on XDA forums to find out how to install APKs via USB C (Android -> PC, PC -> Android) ? I am super new to using the SDK Toolkit and it's all foreign to me.
If anyone knows where to find the platform information on phone without CPU app, please let me know. I would love to skip these steps if there is a way to do so under phone info.
I do not want to google it in case the site is incorrect. I also want to learn how to look for it on my own.
Thanks again!