I have created a small WINDOWS based application(APK Installer) which is capable of installing multiple APK file on your Unrooted or Rooted Android Device in single click.
System Requirements:
> Android SDK or you can also use Minimal ADB and Fastboot by shimp208
> JAVA 1.4.0 and further
> Less than 1 MB space
> Windows operating system
Steps:
1] Download APKInstaller developed by me from the link given below
2] Enable Developers Option in your Android Phone.
3] Enable USB Debugging in your phone.
4] Connect your phone to the PC using Data cable.
5] Click on the APKInstaller.exe file which you downloaded.
6] Give path of Android SDK Directory (for example : C:\androidsdkplatform-tools).
7] Click on Select APK button.
8] Select all the APK files you want to Install.
9] CMD window will popup and it will install all the APK Files one by one.
Download Link: Google Drive
If you find any buy or any problem in using this application dont forget to report it and if you need any help kindly post it in comments.
Thank you.
**Hit Thank Button If You Think I Helped**
Related
This is the first guide and the first rooting EVER for THL W9 based on MTK6589T chipset by MEDIATEK.
Also this will guide you to fully customize and apply fixes and mods to the official THL W9 ROM.
What you need:
a. PC or laptop in good working condition.
b. USB cable for THL W9 (micro usb) in perfect condition.
c. Some knowledge on ADB and Rom Customization.
d. Patience.
ATTENTION: THIS WILL VOID YOUR WARRANTY AND YOU PROCEED WITH YOUR OWN RISK.
THIS CAN PERMANENTLY DESTROY YOUR DEVICE. I'M NOT RESPONSIBLE FOR ANY DAMAGE OR LOSS OF DATA.
SECTION A - IF YOU HAVE THE INTERNATIONAL ROM AND WANT TO ROOT.
1. Turn W9 off , wait for the vibration. Take off the battery, wait 5 seconds and put it back.
Plug usb cable to pc and install usb drivers when asked. (You might need to plug-unplug multiple times to get the driver right) - Driver on MEDIATEK official site or elsewhere.
You might also need ADB working (not sure about this). follow this: http://forum.xda-developers.com/showthread.php?t=2272266
2. Download (from internet) and run eroot v1.3.4. Link: http://www.runamux.net/search/view/file/9fLmV0ty/ERoot-1014.html
Boot W9 to Android and enable USB Debugging. Run eroot (with admin privileges) and IF everything is ok you have to see Thl W9 recognized by eroot.
Click Root. You have to get 4 ticks. Unplug usb, close eroot.
3. Check root - install superuser - busybox.
You can follow this using adb commands: http://forum.xda-developers.com/showthread.php?t=2272266
OR
Enable usb storage mode and copy to SD card the following APK files:
BusyBoxPro v9.9.
SuperSU v1.32
Root Explorer v3.1.1
Root Checker Pro v.1.2.8
You can find those on internet or xda forums. Install everything and run everything.
On root check pro you have to see green text when you press verify Root and BusyBox.
On root explorer you can access root and make it ro->rw (read only, read write).
ROOT IS DONE!
SECTION B - IF YOU HAVE THE OFFICIAL CHINESE ROM WITH NO GOOGLE APPS OR ACCIDENTLY INSTALL THE official CHINESE ROM AND WANT TO GO BACK.
1. Be sure that your rom is in good working condition with no errors.
Otherwise maybe is better to flash official rom again. Language only CN,EN.
Official ROM with flash tool here: http://www.needrom.com/wp-content/uploads/2013/07/W9_20130702-FH16.rar
Source site: http://www.needrom.com/mobile/thl-w9/
If you have the international ROM and want to root, please go to section A.
2. PERFORM TASK 1 ON SECTION A.
3. DOWNLOAD SP FLASHTOOL OR BIRDA FLASH TOOL and official Rom THL W9. BirdA Flash tool included in rar file.
4. Select proper scatter file (specific for official chinese rom) and click download button on flash tool.
Turn Off and remove battery from W9. Wait 5 seconds and put back. Plug USB cable.
Flash tool should detect W9 and start to load... The process will end with a green circle small window. Unplug USB and turn W9 ON.
5. When boot go to settings and language & input. First option is language, switch to English. (Go with symbols because on first boot you got chinese)
6. Perform TASK 2 & 3 of Section A to ROOT W9.
7. Now you have to remove chinese apps. There is no specific way to do it, but the main idea is here:
a) uninstall everything you can from settings->apps.
b) disable everything you can from settings->apps->all. (Be careful to recognize what is chinese and not android's processes)
c) use Root app Delete application to remove unwanted chinese apps. (this is useful when attached to Android system) found on internet or xda forum.
8. Make it Google.
Extract apk files from gapps.zip. download here: http://goo.im/devs/UniqueDroid/gapps/gapps-4.2.1
I notice that google tts conflicting with existing. dont copy this.
Copy the files to your sd card,
Use Root Explorer installed on step 6, and move this apk files from sd card to root/system/app.
Restart. This will install all Google Files and you have to be able to google login, with google services etc.
9. Install extra apk files:
Playstore 4.3.11, maps7.0.0, googletts3.1, googlesearch 2.1.12.516912, youtube4.2.16 from APK files.
Download from internet or xda forums.
If you want to remove THL Stock lockscreen, you can use Holo Locker from play store.
If you ever had the error text to speech has stopped, then go to settings, language and input and under Text to speech select PICO TTS.
GPS FIX
------------
This is for anyone having GPS Issues. Recommended for everyone
Before you start the procedure you need:
1. You HAVE TO BE ROOTED on any ROM (section A)
2. Get Mobileuncle Tools from play store
3. Get GPS Test from play store
4. Get Root explorer from play store (you might have it from previous steps)
Procedure should be done outdoors:
1. Turn GPS off on your phone.
2. Open Root Explorer and find the mtkgps.dat file in /data or /data/misc
3. Delete mtkgps.dat
4. Reboot phone
5. Open Mobileuncle Tools
6. Tap on 'Engineer Mode'
7. Tap on 'Engineer Mode (MTK)'
8. Scroll across to 'Location'
9. Tap on 'Location Based Service'
10. Tap on 'AGPS' and then make sure 'A-GPS On/Off' is checked
11. Tap on 'EPO' and then make sure 'Enable EPO' is checked
12. Swipe down (notification bar) and turn GPS on
13. Hit back and then tap 'YGPS'
14. Wait until you get position lock (mine took about 5 seconds).
15. This process should create a new mtkgps.dat file.
16. Hit home button and open GPS Test.
17. You should get a position lock reasonably quickly.
Sound FiX (using Mobileuncle Tools)
Low volume etc... http://forum.xda-developers.com/showthread.php?p=40646178
mic fix: http://iists.it/saturs/how-fix-low-mic-volume-issue-cubot-gt99
Further customize:
Gravity Box from Xposed Module: http://forum.xda-developers.com/showthread.php?t=2316070
Credits to : C3C076
Exposed Framework master thread: http://forum.xda-developers.com/showthread.php?t=1574401
Good Luck!
Please post any questions or problems as replies here so we can help also other people and share the tips.
This is a thread concerning our blu phones. Anything from porting roms to rooting. I will upload a rooting guide later.
How to root Blu Dash Jr
Hello Blu Dash Jr XDA users. I'm here with a guide on how to root the Blu Dash Jr smartphone.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
IMPORTANT This rooting method is for Windows XP but i found a way to install the drivers on Windows 7 32 Bit, it also works on Windows 7 64 Bit.
1. Download the attached file from below. Also download the android sdk http://developer.android.com/sdk/installing/index.html
2. Extract the file to anywhere on your PC.
3. Install the android sdk.
4. After installing the android sdk, you have to add the android device id for the Blu Dash Jr. This is a spreadtrum device and their android id is 0x1782. We will use this later.
5. After installing the android sdk navigate to your home folder which would be in C:\Users\YOURPCNAME\ and go to the .android folder. If you don't see this folder you may have to enable hidden folders in control panel.
6. Open the adb_usb file with either notepad++ or any text editor. Add the android id from step 4 to the file. An adb_usb file is in the attached files to see how it looks.
7. Disable UAC and any antivirus that you may have.
8. For windows 7 only install the drivers from the folders SCI-Usb Jungo v4 and SCI-USB2Serial v1.5.6.1. For windows xp install all the driver files.
9. Install vroot.exe and run it. Enable usb debugging on your phone and connect it to your computer.
10. Click on the root button on the vroot program and once the phone reboots you should have root.
Link to files that couldn't be uploaded: Additional Drivers https://www.sendspace.com/file/lflj03 Link is dead.
Spreadtrum Drivers: https://www.sendspace.com/file/vzawc5 Link is dead.
Hello Guys. I am new to android development community , i found something very cool and useful for people who could not access latest Android 5.0 lollipop on their devices..
But now they can run android on their PCs..
Requirements-
1. A Windows PC
2. knowledge about booting OS on PC
3. USB stick / Flash Drive
Downloads-
1. Android x86 iso (https://drive.google.com/file/d/0B4VR-WNTOX0qVnkyWExEZHdLTms/view)
I really don't know who is the owner of this file. I found this link on google. Respected owner can PM me.
2. Unetbootin.exe (http://sourceforge.net/projects/unetbootin/)
Procedure-
1. Download the above files
2. Open unetbootin and browse the iso file downloaded
3. create bootable Drive
4. Turn off your PC . and while switching it on select boot options ( key combination is different in my case it is F12)
5. Select the name of your flash drive.
6. i will show some options
(try android without install or install android on pc)
7. i would recommend to first try without installing. its upto your choice to install it or try it.
8. wait for 2-3 minutes for android to boot up.
CONGRATULATIONS
Android has successfully been installed on your PC.
Now you can taste lollipop without the need for lollipop rom for your phone
You can SUPPORT ME by Pressing THANKS button... It's Free:good::good:
Thanks im going to try!
Wifi working? Im using a wifi usb stick on my desktop pc.
Razorback55 said:
Thanks im going to try!
Wifi working? Im using a wifi usb stick on my desktop pc.
Click to expand...
Click to collapse
Sorry. I don't own a wifi usb stick i have a wireless router and is working fine ... you should have a try and tell me i will add it in my OP
Hello buddies..!! I have come up with a simple tool for windows to remove bloatware from your Android device. The tool name is PSA. Many of Android device makers developed their ROM with lots of bloatware which are all that we don't need. I have been searching for the solution to remove unwanted apps(without root). But, I found a solution for all those are with Rooted devices. I end up with disappointment and finally, I started working on developing a simple tool which threw out the waste(unwanted APKs)
Please follow the below instructions to remove system apps from your Android device.
for Rooted devices:,
Download System app remover from play store.
For Unrooted devices (working on almost all devices):
1. Enable USB debugging option in your device.
To enable USB debugging option, go to settings-->about phone-->tap on "build number" option 7 times.
Note: In Xiaomi phones, go to settings-->about phone-->tap on "MIUI version" 7 times.
2.Download PSA tool.
3. Connect your Android device to the windows PC.
4. Click on PSA.exe and enable administrator rights to run the program.
5. Now Download the Package name viewer app from play store.
6. After installing the package name viewer app, you will find the list of packages names under app names. It looks like "com.android.browser".
7. Note down the package name of the app which you want to remove/delete from your device.
8. Enter that package name onto the tool on pc which is asking the package name and click the enter button.
9. You are done...!!! the app will be successfully deleted from your device.
Note: For all download links, please visit my personal blog--> indiantechspot[dot]blogspot[dot]com
I am trying to use Android Studios to Flash a custom OS onto my Razer 2.
The Razer does not connect to Wi-fi and does not have a sim card inside, so I am trying to use a workaround for the Playstore and install the CPU app to retrieve the correct Platform information from my phone. This way I can download the right Gapps File (ARM or ARM x64). and load TWERP so I can flash the ROM.
So:
1. Install Zip Archive App on Razer 2 Via android studios
2. Install CPU APK on Razer 2 Via SDK Toolkit and use Zip app on Razer to extract APK and fully install CPU on Razer
3. Check Razer Processor Architecture (ARM or ARM x64)
4. Install Gapps file and ROM
5. Boot in recovery mode and boot up TWERP
6. Use Twerp to wipe phone and install ROM and Gapps
Is there a guide on XDA forums to find out how to install APKs via USB C (Android -> PC, PC -> Android) ? I am super new to using the SDK Toolkit and it's all foreign to me.
If anyone knows where to find the platform information on phone without CPU app, please let me know. I would love to skip these steps if there is a way to do so under phone info.
I do not want to google it in case the site is incorrect. I also want to learn how to look for it on my own.
Thanks again!