Database Info

GT-P5100 Firmware upgrade encountered an issue

Hi everybody, I tried to upgrade my GT-P5100 to 4.2.2 but something went wrong and now I have a black screen with this message:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Probably I have selected Re-Partition but I didn't have a PIT file
The tablet had the stock rom and was not rooted.
I have Odin 3.07 and this PDA file but the procedure fails:
P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5
Code:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100VFGDMJ2_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can't start Recovery or Download mode.
Can you help me?
Please if I need some more files write me all the links to download them, because many of them were hosted by hotfile and are no more downloadable...

"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
That´s the Black-Screen of Death! Downloadmode is on in this window Connect to your PC, Odin will get your device
There should be no Problem with the file itself "<OSM> Checking MD5 finished Sucessfully.." - bad download will give another output because the MD5 is not valid if it´s broken.
Make sure you uninstall KIES before using Odin and run Odin as Administrator !!!

Kies in installed and Odin is executed as administrator
So what should I do?

GT-P5100 restore stock rom firmware odin
SOLVED using this guide and this file

dylan6662 said:
SOLVED using this guide and this file
Click to expand...
Click to collapse
Hello, i have the same your prblem with my galaxy tab 2 10.1 !!!...
do you remember how you managed to solve?
Do you remember what was the file of "this link" (http://www.bergfiles.com/i/bf5bdebbf2hci0) that is no longer active?...
I have absoluty need !!
THANKS !!!

Still on trouble
I still can find the right link to download the necessary file to flash on my gt-p5100 like this case , my screen just still say "Firmware upgrade encountered......"
cant log into download mode
but still detect on odin
please help me.

Hi all. I have the same problem. A message "Firmware .... an issue" Tried different Odin versions. With 3.07 and 3.10 versions looks like flashing is ok, Odin shows no errors. But nothing on the tablet, there's not status bar. And when flashing finished, Odin shows no errors. But tablet really not flashed. What the problem can be? Who can help?

HELP HELP

andrezerotwo said:
HELP HELP
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...opment/odin-gt-p5100-4-2-2-stock-rom-t3022183
try this link, it is stock firmware.
further if it can't solve by just flashing firmware, you can try pit file. but be careful before flashing this with odin, be sure of what it will do, there are guides to explain the proper process.
http://forum.xda-developers.com/showthread.php?t=2552155

I have the exact same problem, tried different odin versions, flashed the stock firmware, also tried different pc's, but no solution.
this is the error I keep getting on odin, Tried Kies it says P3100 does not support initializing. A friend says maybe its a motherboard issue, is that possible or just a firmware problem? What should I do next?
This is the error I get in ODIN.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100DDCNA3_P3100ODDCNB1_P3100DDCLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

v1v14n said:
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi! With my tablet the same. I understand that eMMC has died, need a replacement and reflashing of the programmer.

GT-P5100 Firmware upgrade encountered an issu
Hi All,
I have the exact same problem with GT P5100, I cannot update my 5100,Itried different odin (1.85,307,309,1,7) versions, flashed different firmwares, but no solution.
this is the error I keep getting on odin.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMD1_P5100DBTDMD1_P5100XXDLL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Many thanks in advance,

[Resolved] [Q] Note 3 Sm-n900 root error odin FAIL! HELP!

I tried to root my sm-n900 note 3 and followed all the instructions to the letter on the forum and when I tried to root through odin, it says writing cache.img and I wait for a few minutes then it says FAIL, I unplugged then restarted my phone and it says "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE, PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" and now kies doesnt recognize my device anymore, So what can I do now? I really want to root but damn samsung wont let me!
I see this in odin btw
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
UPDATE!
I tried using odin 1.85 to root, and now its stuck at cache.img it hasnt changed for maybe an hour now what?
UPDATE2
phew unticked autoreboot in odin and manually rebooted and everythings good

Sorry I could not tag your question due to failure with the mobile app. For starters I did not worry about using the auto-root option since I am not worried about tripping Knox counter. I prefer to flash twrp or cwm via Odin and then flash the current version of supersu from the recovery or if you are looking to install a custom Rom you can just flash it instead. Nothing against CF auto-root but this has always worked for me.
sm-900t: Powered by X-Note V13

FFTony said:
Sorry I could not tag your question due to failure with the mobile app. For starters I did not worry about using the auto-root option since I am not worried about tripping Knox counter. I prefer to flash twrp or cwm via Odin and then flash the current version of supersu from the recovery or if you are looking to install a custom Rom you can just flash it instead. Nothing against CF auto-root but this has always worked for me.
sm-900t: Powered by X-Note V13
Click to expand...
Click to collapse
Could you please explain that in noob terms?

firmware upgrade encountered an issue. please select recovery mode in kies and try ag
hi
i have same problem.
pls help me..
willzhang0 said:
I tried to root my sm-n900 note 3 and followed all the instructions to the letter on the forum and when I tried to root through odin, it says writing cache.img and I wait for a few minutes then it says FAIL, I unplugged then restarted my phone and it says "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE, PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" and now kies doesnt recognize my device anymore, So what can I do now? I really want to root but damn samsung wont let me!
I see this in odin btw
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
UPDATE!
I tried using odin 1.85 to root, and now its stuck at cache.img it hasnt changed for maybe an hour now what?
UPDATE2
phew unticked autoreboot in odin and manually rebooted and everythings good
Click to expand...
Click to collapse

Awesome... Your technique worked for me.
You just have to uncheck the auto reboot option. Its so simple.
Thanks a lot man!

i have this same problem..pls help me..even i unticked reboot option but its not working...stuck in da middle while rooting..pls help me..

[Q] Cf-Auto-Root LOOP STUCK! PLEASE HELP!!!!

Hi guys, i'm new to this forum and I came here for some answers and needed help please! So I managed to get my phone into Odin download mode ( Hold power + home + vol Down). I have a S2 SGH-I757M Phone. I Inserted my usb cable into my my pc connecting my phone to Odin. I added the Cf-auto-root into the pda section and I got this log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-sghi757m-sghi757m-sghi757m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)[/SIZE]
Now My phone reboots and its stuck with the red pirate andriod and at the bottom is says Cf-auto-Root, and under that it says the developers name and such and that is it.
Any help would be highly appreciated. I'm downloading the stock rom (100MB/632MB) to get my phone working again as i need it for tomorrow very urgently. Please how can I fix this problem??

try to flash ROM from Sammobile

Sourman97 said:
Hi guys, i'm new to this forum and I came here for some answers and needed help please! So I managed to get my phone into Odin download mode ( Hold power + home + vol Down). I have a S2 SGH-I757M Phone. I Inserted my usb cable into my my pc connecting my phone to Odin. I added the Cf-auto-root into the pda section and I got this log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-sghi757m-sghi757m-sghi757m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)[/SIZE]
Now My phone reboots and its stuck with the red pirate andriod and at the bottom is says Cf-auto-Root, and under that it says the developers name and such and that is it.
Any help would be highly appreciated. I'm downloading the stock rom (100MB/632MB) to get my phone working again as i need it for tomorrow very urgently. Please how can I fix this problem??
Click to expand...
Click to collapse
Try to Download And Install the same root package again and flash it via odin!!
If your Device is Still Stuck Re-Flash Stock Rom

pushkardua said:
Try to Download And Install the same root package again and flash it via odin!!
If your Device is Still Stuck Re-Flash Stock Rom
Click to expand...
Click to collapse
I got it working, Thanks. However my AWS band got removed from my phone or something because I am unable to use wind/mobilicity.
/closethread

Sourman97 said:
I got it working, Thanks. However my AWS band got removed from my phone or something because I am unable to use wind/mobilicity.
/closethread
Click to expand...
Click to collapse
hi im in the same boat can you plz let me know how you did this fix?
iev try'd redoing an try'd finding stock rom but cant and now im stuck plz help!!!

ODIN fail: NAND write fail

I factory reset my Samsung Grand 2 then charged it. When I saw my phone it was updated in kitkat. I accidentally hit the install and reboot. But after that, it stuck in logo screen. I've tried to wipe data, cache and everything. So, I flash it with odin with correct latest firmware. But it keeps on failing and appears firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Ive tried to fix it with Kies but there's no chance. I also brought it to service center but they said it keeps on failing and the program cant enter.
This is the ODIN log:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching how to fix my phone.
PLEASE SOMEONE HELP ME.

xilaaa said:
I factory reset my Samsung Grand 2 then charged it. When I saw my phone it was updated in kitkat. I accidentally hit the install and reboot. But after that, it stuck in logo screen. I've tried to wipe data, cache and everything. So, I flash it with odin with correct latest firmware. But it keeps on failing and appears firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Ive tried to fix it with Kies but there's no chance. I also brought it to service center but they said it keeps on failing and the program cant enter.
This is the ODIN log:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching how to fix my phone.
PLEASE SOMEONE HELP ME.
Click to expand...
Click to collapse
See if you have the proper firmware and read the instructions here: http://forum.xda-developers.com/galaxy-grand-2/general/stock-firmware-grand-2-google-drive-t2849501
Or else you could ask help from anyone having a similar phone in this forum: http://forum.xda-developers.com/galaxy-grand-2

I tried the instruction but it didn't work still failed. I also tried to flash it with original stock but it says SW REV CHECK FAIL : [sbl1]Fused 1 > Binary 0
Im losing hope. Please help :crying: :crying:

xilaaa said:
I tried the instruction but it didn't work still failed. I also tried to flash it with original stock but it says SW REV CHECK FAIL : [sbl1]Fused 1 > Binary 0
Im losing hope. Please help :crying: :crying:
Click to expand...
Click to collapse
I don't know specifically about your phone.
Only asking someone here would help: http://forum.xda-developers.com/galaxy-grand-2/help

I tried to downgrade my phone but it shows SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1

Help: Samsung S6 SM-G920F (post-root problems)

Originally posted to reddit.com/r/androidtechsupport/
Hello everybody.
Ok so let's put it straight, I'm one of those tech noobs trying to do **** on PC and Android but failing almost everytime.
I wanted to be able to install Lucky Patcher on my Samsung S6 SM-G920F so I followed one simple and basic guide by tomsguide(dot)com on rooting my phone that told me to install Odin and then flash a file name "CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5" on AP. Then reboot.
I went on with updating SuperSU, installing Busybox and Lucky Patcher and was finally able to cheat in a solo game I downloaded last week.
Since then, I am not able to install ANY App (external or Play Store). Downloading works fine but I get either invalid APK file (adb install command) or Error -505 from Google Store.
Now I thought, I might as well just undo the root through Odin and then begin from somewhere else, because I don't know the root cause.
I then followed a guide buy wonderhowto(dot)com to un-root and flash into firmware (right country etc.) but now I am stuck with this log on Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005> <ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen (odin mode) it says: "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3
Can anybody help me out of the mess I made?
I'd like to install a custom ROM (CarHDRom_V.27.0_5DPL4.zip) - be able to install any app - use lucky patcher again.
PS: I already did a factory reset, but it did not help.