Hey guys Im kinda back a little as I lost my job so got some free time
here is my slightly modified Elite_Lunar kernel with higher gpu freq and my ragingmolasses gov added and some govs removed, maybe other stuff in the future will be different but its pretty much just elite lunar. This will be sense only, i dont run GPE so Im not gonna make one for it.
Features
-------------------
-Cpu-boost driver enabled
-Intelli-plug
-Intelli-thermal
-Intelli-active
-Intelli-demand
-Cpu-frequency limiter driver
-Faux Sound Control
-Ex-fat support
-NLS/CIFS Support
-Graphics boost
-LZ4/Linaro 4.9.2
-Fsync Control
-Added SIO scheduler
-Added FIOPS scheduler
-Fastcharge with thermal control
-Kcal color/gamma control
-Customizable wake gestures
-Sweep 2 sleep
-CPU OC to 2.4ghz
-GPU OC to 600mhz
-ragingmolasses governor
-Max screen off freq
-GPU simple gpu governor
-Simple GPU algorithm
-Entropy Tweaks
-Write Protection disabled
-Frandom
-Optimized crypto algorithms
-Voltage Control
-High Performance Audio
-Zcache Improvements
-MSM Turbo Boost
-Advanced TCP Congestion Control
Source
-----------------------
MODERATOR REMOVED
Thanks
----------------------
All thanks goes to buckmarble and all issues you have to me, its his source but not his problem
Download
-------------------------
MODERATOR REMOVED
What is Ragingmolasses?
--------------------------------
Besides a gov with an awesome name its a mash up of conservative and ondemand and scales based on load with few tunables. Its meant to be simple, fast, and efficient at keeping the frequency away from the max clock unless it is absolutely needed. it includes gboost for better gaming.
Ragingmolasses tunables
------------------------------------
Sampling Rate - how often it checks CPU load, i keep this low around 10000-15000
up_threshold - above this it becomes ondemand governor based 100% on CPU load, below it acts like conservative and tries to keep the frequency down.
sampling_rate_min - dont worry about this
ignore_nice_load - the system will ignore "Nice" processes when deciding to scale up or down. I leave it at 0
Sorry you lost your job.. Thanks for the kernel!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jbarcus81 said:
Sorry you lost your job.. Thanks for the kernel!!
Click to expand...
Click to collapse
lol thanks, it happens no big deal, and youre welcome :]
Hey man, thanks for bringing us a awesome kernel again
Where are the commits you made to change it? I don't see anything new on your git. I wanna try out your gov on my gpe kernel.
JennyLikesSka said:
Where are the commits you made to change it? I don't see anything new on your git. I wanna try out your gov on my gpe kernel.
Click to expand...
Click to collapse
ill be commiting the changes here in a bit been working on porting my gov to the Firefly RK3288 (needed some changes to fit the RK3288 source)
JennyLikesSka said:
Where are the commits you made to change it? I don't see anything new on your git. I wanna try out your gov on my gpe kernel.
Click to expand...
Click to collapse
commit pushed, sorry if the description isnt that great im workin on something so i just pushed it real quick
keep in mind you may need to add gboost to your kernel for it to work right if you dont have it already. Bucks source already did so the the commit wont have gboost changes
krazie1 said:
Hey man, thanks for bringing us a awesome kernel again
Click to expand...
Click to collapse
dont thank me thank buckmarble then when something messes up you can complain here lol
Echoa said:
commit pushed, sorry if the description isnt that great im workin on something so i just pushed it real quick
keep in mind you may need to add gboost to your kernel for it to work right if you dont have it already. Bucks source already did so the the commit wont have gboost changes
Click to expand...
Click to collapse
mines based on elite lol thanks for pushing them!
This looks interesting......... Flashing now
---------- Post added at 04:28 AM ---------- Previous post was at 04:22 AM ----------
The link isn't working for me. Anyone else?
This new Gov suppose to yield some nice battery? Using it with intelliplug and it is very snappy!
d08speed3 said:
This new Gov suppose to yield some nice battery? Using it with intelliplug and it is very snappy!
Click to expand...
Click to collapse
Depends on how you use the device/have it set
RM works a bit different then you might think, if you want more low/middle frequencies you set the up threshold low, to skip frequencies set it higher and it'll act more like a min/max gov.
If you want to change freq less often you set the sampling rate higher, more frequently set it low. Ignore nice load also might add some battery savings but haven't tested it.
Echoa said:
Depends on how you use the device/have it set
RM works a bit different then you might think, if you want more low/middle frequencies you set the up threshold low, to skip frequencies set it higher and it'll act more like a min/max gov.
If you want to change freq less often you set the sampling rate higher, more frequently set it low. Ignore nice load also might add some battery savings but haven't tested it.
Click to expand...
Click to collapse
Sounds good. Just using default seems decent so far. Been using intelliplug lately again.
Your new governor sounds interesting. Which governors that were in Elite are NOT in this kernel?
My name is Harold and I'm a flashaholic....
hgoldner said:
Your new governor sounds interesting. Which governors that were in Elite are NOT in this kernel?
My name is Harold and I'm a flashaholic....
Click to expand...
Click to collapse
i think
-Intelli-minmax
-Optimax Gov
are the only ones i removed
What do the governers for the gpu do? I guess I've never paid attention to them before..
Sent from my HTC6525LVW using Tapatalk
Anyone else lose access to their sd card after flashing? I'm running bonestock 3.0 as a multirom guest from internal memory with dh's gpe 12/28 build as host. Flashing from multirom twrp 2.8.2.0
Sent from my HTC6525LVW using Tapatalk
garywojdan81 said:
Anyone else lose access to their sd card after flashing? I'm running bonestock 3.0 as a multirom guest from internal memory with dh's gpe 12/28 build as host. Flashing from multirom twrp 2.8.2.0
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Ive never used multirom so i couldnt tell you what the issue may be. AFAIK bucks source should support it just fine but maybe someone who uses multirom may know or can say if they have a similar issue?
FYI, its just Elite Kernel. No more lunar..... Now there's two kanged versions of my kernel......interesting.....
Related
Hello Everybody!
So, this is some kernel code that I ported over from the lovely Jugs0.3 kernel and Synergy kernel for T-Mobile SGS II, applied to our fancy pants Skyrocket. The codebase has been brought nearly up to parity with codeaurora msm kernel and I have also patched out several buggeroonskis.
It's tested by myself and the awesome guys in irc.irondust.net #skyrocket, thanks fellers!
This version has OC support to 1.863GHz and 1.6v, with BFQ, UV/OC support, init.d support, BLN support, compiler optimizations, and insecure (for adb root access)
It is packaged as a CWM zip for the easy flashing.
Thanks to the awesomeness known as k0nane for hosting!
[size=+3]
0.42 Download
AT&T 0.42
Rogers 0.42
[/size]
Overclock/Voltage script (Flashable CWM zips)
1.72GHz
1.78GHz
1.83GHz
[size=+3]Original Kernels and stock files to restore from CWM[/size]
AT&T: Original Kernel/init.qcom.rc/lights.msm8660.so CWM zip
Rogers: Original Kernel/init.qcom.rc/lights.msm8660.so CWM zip
NOTE: 1.78GHz is about all I can run stable, and running with 192MHz active seems to cause SoD for me. Careful with undervolting. A few people have reported filesystem corruption resulting in force closes every bootup when volts are too low, resulting in the need to flash the original recovery.img (CWM will not fix it), and wipe data/cache to restore phone.
Old Versions said:
AT&T 0.41 (Mirror)
Rogers 0.41 (Mirror)
AT&T 0.4 (Mirror)
Rogers 0.4 (Mirror)
AT&T 0.3: AT&T Kernel 0.3
Rogers 0.3: Rogers Kernel 0.3
AT&T Kernel 0.3-pre2
Rogers Kernel 0.3-pre2
AT&T 0.2 kernel (no rogers release for 0.2)
dag-sgh-i727-183ghz-initd-unsecure-kernel-0.1.zip
dag-sgh-i727-183ghz-1325v-initd-unsecure-kernel-0.1.zip
dag-sgh-i727-178ghz-initd-unsecure-kernel-0.1.zip
dag-sgh-i727-172ghz-initd-unsecure-kernel-0.1.zip
dag-sgh-i727-167ghz-initd-unsecure-kernel-0.1.zip
Click to expand...
Click to collapse
As it is using the same OC/UV codebase as t-mobile sgs ii, the same tools apply to adjusting OC/UV: 1,2,(guide to creating voltage control scripts)
Changelog:
0.42
- New sysfs interface allowing tweaking of voltages and frequencies beyond CPU: L2 Frequency, sys_vdd, vdd_dig, vdd_mem, L2 <---> CPU frequency mapping
0.41
- Fixed a crash with video playback in 0.4
0.4
- Merge to codeaurora msm kernel, bringing in a few months worth of patches
- Multiple optimizations to audio/video encoding/decoding path
- Fixed CPU1 locking at lower speeds
- AAC Multi-Channel/Dual-Mono audio decoding support
- Added lower 3D GPU step for power saving on less demanding 3d apps
- Multiple power saving features
- Tons of debug code removed
- Compressed with xz for a smaller kernel
- Reduced latency for CPU1 hotplug for faster bringup/shutdown
- Scheduling improvements, ARM SMP Ticketing
0.3
- re-built from rogers source, with OC/UV code from romanbb/faux123/mr.x
- ondemand, interactive, userspace, performance, conservative, lagfree, smartassV2 governors
- Deeper sleep state enabled and lowest stepping reduced to 54MHz - should improve battery life vs. stock kernel (may be offset by GPU OC)
- 25mV undervolt across the board
- bus speeds/volts reduced slightly for stability
- GPU overclock 30mhz on 3d core and 10mhz on 2d core
- Autoscheduling implemented
- 1.83GHz step currently not working, seems to be related to GPU overclock and over-current protection. Setting 1.83GHz step causes weirdness like one core locking to 900mhz while the other core reports 1.83 and is really running 1.78. Stick to 1.78 max for now.
- USB OTG support is enabled - I have no devices/cables to test this functionality, please report!
0.2
Merged in some parts of Synergy kernel
Set to no OC/UV by default, use System Tuner or similar to apply OC/UV
BFQ Scheduler
lagfree/ondemand[X]/interactive[X]/performance/smartassV2 governors (default ondemand)
384mhz minimum by default (192 may cause problems)
BLN (use bln control app from market to activate and control)
Shut down issue fixed
Bootanimation reverted to samsung for the mo (weirdness with /system/bin/bootanimation?)
0.1
First Release, based on romanbb's jugs kernel
Source located here:
https://github.com/dagnarf/dagkernel
The obligatory screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
reserved2!
I'm k0nane, and I approve this message. Shouts to #skyrocket and the Hit Squad.
here are some proof
Here are some screen shots of the new Kernel running
Have fun guys. You guys will definitely feel a difference on your Skyrocket
Runs well, had to slightly declock to 1780 to run benchmarks without the phone rebooting itself.
Sent from my SGH-T989 using xda premium
Same here. Just as the T-Mobile was unstable at 1.8, so is this but my gosh, it is fast!! Thank you for the port.
Da_G said:
First version here has OC support to [email protected], with UV support, init.d support, boot anim support, compiler optimizations, and insecure (for adb root access)
Click to expand...
Click to collapse
Since this is a port from Jugs does it support BLN also?
Girn said:
Runs well, had to slightly declock to 1780 to run benchmarks without the phone rebooting itself.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
So, what are the benchmarks at? Will be flashing soon.
Gr8Danes said:
So, what are the benchmarks at? Will be flashing soon.
Click to expand...
Click to collapse
wanna say in the 4100's high side really nice
any of you folks running this with the skystocketeer ROM? thanks for the feedback
Running with SkySTOCKeteer (although I may have to go back until the Clock is brought back 0.o)
At 1.72ghz
Out of 5 runs
My highest quadrant 4400
Lowest Quadrant 3680
AnTuTu 6608 (best of 3 runs)
Is anyone having any issues with downloading content from the Market (non WiFi)?
No problem with Market via data here.
Which clock is out? Crawl. I use this as more of a daily driver than an experimental devoted device
2.5 yr old will def change it up for ya
Sent from my SAMSUNG-SGH-I727 using xda premium
I have no clock app, at all. (the normal Android Clock app is gone) with SkySTOCKeteer
crawlgsx said:
I have no clock app, at all. (the normal Android Clock app is gone) with SkySTOCKeteer
Click to expand...
Click to collapse
So no statusbar clock?
If answer is no - same reason for me to hold off until development passes the stock hashmark?
Sent from my SAMSUNG-SGH-I727 using xda premium
jcvancleve said:
So no statusbar clock?
If answer is no - same reason for me to hold off until development passes the stock hashmark?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
The Statusbar clock is there, the lockscreen clock is there, there is no clock APP.
You fellas an your fancy clocks..
Sent from my SAMSUNG-SGH-I727 using xda premium
Just installed the kernel.
Booted up.
Waited a couple minutes.
Then kicked off AnTuTu.
About ten seconds later, the phone rebooted.
It's cycling.
Rebooting over and over.
Gets to the lock screen and a few seconds later it reboots.
Over and over. lol
Only other mod is the T-Mobile BeastMod ROM using r34p3rex's method for running TMO ROM's on the Skyrocket.
I'm guessing this kernel is conflicting with that somehow.
CZ Eddie said:
Just installed the kernel.
Booted up.
Waited a couple minutes.
Then kicked off AnTuTu.
About ten seconds later, the phone rebooted.
It's cycling.
Rebooting over and over.
Gets to the lock screen and a few seconds later it reboots.
Over and over. lol
Click to expand...
Click to collapse
Did you install something to change the clock? It does not like 1.8ghz, clock it down to 1.78/1.72 and try again.
Though it may not like the Tmobile stuff too, not sure.
This ROM is for those people who needs performance and smoothness and not big changelogs.
ONLY 3 main stuffs here
1)This is a simple ROM with basic apps and JPQ base ROM!.
2)It has ICS theme .
3) stock kernel
Click here->NIVY ROM
For g3mod v 1.2.4 ultimate for better battery and performance
Nivy ROM
Download from here
I would like to Thanks Arun for helping and guiding me to make a ROM.
NIVY ROM:- Nivedith.G
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good luck with your rom!
Sent from my GT-i5801 using XDA App
thanks for your good wishes
nivedith007 said:
thanks for your good wishes
Click to expand...
Click to collapse
I'll try it once i buy my new battery! My old one doesnt even last 30min without dying
Sent from my GT-i5801 using XDA App
please give me feedback and suggestions once u try
nivedith007 said:
please give me feedback and suggestions once u try
Click to expand...
Click to collapse
Sure As my battery started crapping out before trying any custom rom, i do not know how good each custom rom is in terms of battery life Your rom will be the first rom i flash with my new battery Latest by next week i should get it unless something crops up
EDIT: maybe you could state if its prerooted etc. I presume it is though
nivedith007 said:
This ROM is for those people who needs performance and smoothness and not big changelogs.
This is a simple ROM with basic apps and JPQ base ROM!.
It has ICS theme .
it has g3mod v 1.2.4 ultimate for better battery and performance
I am making the ROM for the first time
Click here->
Nivy ROM
I would like to Thanks Arun for helping and guiding me to make a ROM.
NIVY ROM:- Nivedith.G
Click to expand...
Click to collapse
hoho downloading it eager to try it!!!!!!!!!
nice rom good luck. maybe you should add some small things like app2sd.
Welcome to the development Arena ...All the best with your ROM development
vivekchamoli said:
Welcome to the development Arena ...All the best with your ROM development
Click to expand...
Click to collapse
and yeah nivedidth remembere 1 thing release your rom's version fast then people will note you
thanks for the advice parth..will try to do asap..bt plz chk my rom once and temme what r the improvements needed fr the nxt version.update.
Hello,
could you make a basic custom rom like the one you are making now. I have this proposal for you: base rom I5800XXJPU, no modified kernel just the stock one, a custom theme(which one you like), custom icons like those in samsung galaxy s2, and a custom lock screen of your choice, as for system aps use the same scheme as you are using right now.
Good luck!
iuli2011 said:
Hello,
could you make a basic custom rom like the one you are making now. I have this proposal for you: base rom I5800XXJPU, no modified kernel just the stock one, a custom theme(which one you like), custom icons like those in samsung galaxy s2, and a custom lock screen of your choice, as for system aps use the same scheme as you are using right now.
Good luck!
Click to expand...
Click to collapse
I think a different base like jpq is a nice alternative as there are still many people who prefer jpm/jpq etc.
Sent from my GT-i5801 using XDA App
has anyone downloaded the rom as yet??? pls lemme knw, hows is the experience?
I'm eager to try, just have to find a maintenance window as this is my only phone.
I like "fast" roms , for that reason I stripped the stock JPU, rooted and put g3mod 1.3.0 ultimate kernel (200-1200mhz with bus OC).
For installing many apps I use the link2sd app from market (free).
Personally I don't care much about theming, as long as visibility is good (high contrast in bright sunlight).
I think I tried g3mod 1.2.4 before...but I can't remember why I stopped using it..
Could it be the lack of init.d support , or sound or stability issues ? I don't recall.
Suggestion :
Add link2sd to your rom (it's faster than app2sd/hybrid data2sd)
By the way, if you face sound clicks with older g3mod here's a remedy :
setcpu profile (based on g3mod 1.3.0 , 200mhz stepping) :
screen-on (on-demand governor) 800-800 (low/high same frequency)
screen-off (on-demand governor) 200-400
in-call (on-demand governor) 200-400
concept:
screen on, freq. fixed to high CPU (as main drain is screen anyway). no sound clicks.
screen off / in-call : cpu to 400 mhz max. (works great, saves battery)
About the sound clicking. It seems related with bus OC and CPU scaling. When you set governor to on-demand and scaling min/max to 200/1200, then when freq. changes clicking is heared (in youtube for example).
BUS OC gives you faster graphics performance, and also RAM and IO thoughput.
As soon as I find a chance to install your ROM, I will.
nivedith007 said:
has anyone downloaded the rom as yet??? pls lemme knw, hows is the experience?
Click to expand...
Click to collapse
I can test it if you really want but I'll be unable to report the battery life as i haven bought a new battery yet
Sent from my GT-i5801 using XDA App
Hello,
i am testing your rom! So far so good , i haven't got any problems with it.
I feels smooth and fast.
I will come with other feedbacks later.
A good day to you.
@bscraze actually thr has been an glitch in uodating the kernel, though i was using g3mod in my version on my phone, but the file i uploaded has the stock kernel just as u wished
iuli2011 said:
Hello,
i am testing your rom! So far so good , i haven't got any problems with it.
I feels smooth and fast.
I will come with other feedbacks later.
A good day to you.
Click to expand...
Click to collapse
@iuli2011 thanks f testing u need to set the values @ no frills cpu control fr smoothness and hassle free exp.. and ya..lemme knw..hw is the battery drain??
vleutmans said:
I'm eager to try, just have to find a maintenance window as this is my only phone.
I like "fast" roms , for that reason I stripped the stock JPU, rooted and put g3mod 1.3.0 ultimate kernel (200-1200mhz with bus OC).
For installing many apps I use the link2sd app from market (free).
Personally I don't care much about theming, as long as visibility is good (high contrast in bright sunlight).
I think I tried g3mod 1.2.4 before...but I can't remember why I stopped using it..
Could it be the lack of init.d support , or sound or stability issues ? I don't recall.
Suggestion :
Add link2sd to your rom (it's faster than app2sd/hybrid data2sd)
By the way, if you face sound clicks with older g3mod here's a remedy :
setcpu profile (based on g3mod 1.3.0 , 200mhz stepping) :
screen-on (on-demand governor) 800-800 (low/high same frequency)
screen-off (on-demand governor) 200-400
in-call (on-demand governor) 200-400
concept:
screen on, freq. fixed to high CPU (as main drain is screen anyway). no sound clicks.
screen off / in-call : cpu to 400 mhz max. (works great, saves battery)
About the sound clicking. It seems related with bus OC and CPU scaling. When you set governor to on-demand and scaling min/max to 200/1200, then when freq. changes clicking is heared (in youtube for example).
BUS OC gives you faster graphics performance, and also RAM and IO thoughput.
As soon as I find a chance to install your ROM, I will.
Click to expand...
Click to collapse
@vleutmans thanks for the advice man, i am nt using netcpu..using no frills cpu control..i feel its much btr thn setcpu.. and set the values of 800mhz for max and 600 mhz min.. and governor performance and cfq in I/O scheduler. its pretty smooth den...
Please try shadow, samurai, and stock kernels also for a bit to see what one you like best! Don't choose a kernel because everyone else likes it or because it has a long feature list and fancy new shiny things.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a kernel, not a full ROM... please use AOKP, MIUI4, or CM9 with this...
Atarashii - New/Fresh - This kernel was made to revolutionize what all of the current 'normal' Epic kernels have. I have added in tweaks and mods that were never before seen on the Epic, long forgotten, and from other devices such as the Nexus S and i9000.
Hopefully (probably) most other kernel developers will implement these new features and help keep the Epic current.
I prefer that you use NSTools to overclock and undervolt and do other tweaks. It is more featured than Voltage Control and this kernel supports it better. Voltage Control works fine too but I recommend uninstalling all cpu tools you have and installing NSTools.
I am not responsible to ANYTHING that happens to you or your phone as a result of using this kernel. Most things in this are experimental to a point but have been tested and confirmed safe.
Some of these features have NEVER been used before on the Epic, so don't expect everything that you are used to. Things can and will be different than usual.
Feature List
Voodoo Sound v10 by Supercurio
Voodoo Color by Supercurio
Optimized compiler flags by netarchy and Ezekeel
Live OC (on the fly bus overclock) by Ezekeel (Use NSTools app, not voltage control)
Custom Undervolt by Ezekeel (Use NSTools app, not voltage control)
Misc. bugfixes
Battery Life eXtender (BLX) v1 by Ezekeel
OS tools compiled with O3
Swappiness set to 10 from 60 (Rodderik)
Voodoo mDNIe (keeps text sharp and backgrounds don't look like crap)
Defconfig tweaks
Overclocking (no need for enabling crap in Voltage Control)
Undervolting both via Voltage Control and NSTools (Ezekeel & nubecoder)
Tweaked ondemand
Tweaked conservative
Optimized SIO
Optimized deadline
Added TINY_PREEMPT_RCU
Added optimized CRC32 algorithm
Optimized ARM RWSEM algorithm
JHash 3
Added SLQB memory allocator
Add 3 Button Reboot
Increase default readahead to 1024kB
Voodoo Color defaults that do not suck
Allow CPU-supported unaligned accesses
Some SD/MMC tweaks (might reduce wakelocks)
mDNIe is enabled but tweaked to look good
Swag
Major thanks
Ezekeel
Team Glitch
Epiccm team
bbelos
nubecoder
nullghost
rodderik
supercurio
Aprosamurai
thomasskull666
Many many others
Source
https://github.com/marcusant/Atarashii
Download
v5 w/ Voodoo: http://marcusant.com/nyankernel/epic/nyan_v5_perm.zip
a0e5cca4fdc856c4468f8188e5d0c871
v5 w/o Voodoo: http://marcusant.com/nyankernel/epic/nyan_v5_perm_noVoodoo.zip
ce52381883c180a09aefb2e3e427e730
Replace TWRP with CWM (flash within TWRP with inject off): http://marcusant.com/android/epic/restore-cwm.zip
Changelog
v5 WiP
-Update to beta3 of cm9
-Change DVFS relayed things
-Cypress touch key fixes
-Update to kernel 2.35.13 (still listed as .7)
-Switch to git SHA1
-Add boot progress bar
-Switch to crespo mdnie
-Reduce log buffer size
-Battery updates from infuse
-KSM
-ULP_FREQ lowered to 400mhz
-Sysfs control for capacitive lights
-Glibc versions of string and memcopy
-Add proportional rate reduction
-Fix Google Maps
-Increase USB strength
-More
v4.1
-Fix green flashing to some extent
v4.2
-Add TWRP (may go back to CWM) (Dees-Troy)
v4.3
-Add some misc stuff
-Switched to voodoo color settings from bbelos
-Fixed some sleeping stuff and 100mhz (mkasick)
-Increase USB strength
-Add sysfs control for softkeys (bbelos)
-Update to current beta3 of CM9 (still works on AOKP and older CM9 builds)
-Fixed GMaps
WOW finally 1st on a post!
And what a post to be FIRST on...Thank a ton marcusant! DL'ing NOW
Very interesting, I'll definitely be looking over your code tomorrow morning while I'm at the doctor's office lol. Good work my friend, this is definitely another big step forward for the Epic!
Sent from my SPH-D700 using xda premium
Nice Marcus!
All these new tweaks really got me curious!
I'm gna flash it and see how my phone likes it.
Pretty excited to try this kernel out
Sent from my SPH-D700 using xda premium
thomasskull666 said:
Very interesting, I'll definitely be looking over your code tomorrow morning while I'm at the doctor's office lol. Good work my friend, this is definitely another big step forward for the Epic!
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I used some of your old things for voodoo (needed to be added to a new file and changed a bit) so thanks!
Sent from my SPH-D700 using Tapatalk
OP cleaned up a bit.
downloading
hey so im anoob at this at uv and oc
whats the purpose of these two?
Thanks! DL'n Now!
---------- Post added at 11:53 PM ---------- Previous post was at 11:52 PM ----------
diablo311 said:
downloading
hey so im anoob at this at uv and oc
whats the purpose of these two?
Click to expand...
Click to collapse
UV to save battery!
OC to make your phone snappy!
downloaded and flashed.
booting up .......
ummmm one more thing tho
how wud i set up the uv to save battery? im sorry i know its off topic but i just thought about asking this sorry,...
One of the first, flashing it now, thanks!!
Flashed and running on B31. Looking good so far Marcus. Any type of behavior we should be looking out for due to some of these "new/old" tweaks?
Sent from my SPH-D700 using xda premium
One of the clear changes is that the whole color scheme appears a little bluish. It's not bad, but is there a way to revert back to natural colors? Thanks!
Sent from my SPH-D700 using XDA
incisivekeith said:
One of the clear changes is that the whole color scheme appears a little bluish. It's not bad, but is there a way to revert back to natural colors? Thanks!
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
I'm going to change that but for now you can just change it in the "voodoo sound" app under samoled
Sent from my SPH-D700 using Tapatalk
marcusant said:
I'm going to change that but for now you can just change it in the "voodoo sound" app under samoled
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Actually I'm liking the change in the color scheme - I was just wondering how to revert back if needed.
Another thing I noticed is that while scrolling in XDA threads it stutters. It might be just me but still wanted to point out.
As someone asked it would be really nice to know what kind of good changes we should expect from this kernel. It looks good.
Sent from my SPH-D700 using XDA
MD5?
Not the worst thing in the world but for about the last 4 seconds of boot and then until my sd card has been scanned, everything has a heavy green overlay.
Sent from my SPH-D700 using XDA
Also NSTool won't let me set battery charge to above 96%. Not sure if that is relevant to the kernel or if that is an app "feature" though.
Sent from my SPH-D700 using XDA
marcusant said:
How to overclock
Download NSTools from the market
Go to the CPU tab
Set the max frequency to what you want
Liveoc is really buggy and I need to talk to thomasskull about some RAM things to make sure I do not brick anybody. For now, do not mess with liveoc and keep it at 100%.
How to undervolt
Download Voltage Control (this is also possible via nstools)
Slide to the voltages tab
Click on a frequency
Slide the slider to change UV value and apply
Click to expand...
Click to collapse
So we should have both nstools and vc installed and running at the same time if Iwant to oc and uv? What kind of downside to the kernel if I want to use vc for both ocing and uving? *
riotkid976 said:
Not the worst thing in the world but for about the last 4 seconds of boot and then until my sd card has been scanned, everything has a heavy green overlay.
Sent from my SPH-D700 using XDA
Click to expand...
Click to collapse
I just noticed that when I unlock my phone there is a green film covering the screen for a fraction of a second.
It seems my Epic can't handle 1.4 GHz speed as it hangs and restarts, so I am decreasing the clock speed. Does anyone have issues like me at 1.4?
Sent from my SPH-D700 using XDA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
Cdub50
CPA Poke
Code:
Linaro 4.9 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Gamma Configuration support
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
Code:
[url="http://goo.gl/Hkh7Kp"]LiquidSmooth v3.0 Full list of features[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[URL="https://github.com/LiquidSmooth/android_kernel_samsung_d2"]Deathly Kernel Source[/URL]
Code:
[url="http://goo.gl/azhHsk"]Main Thread (Download links and explanation)[/URL]
Please Support Liquid by Donating HERE
Deathly Kernel (Built in!)
*Deathly 1.3 Features*
Updated frequently from kernel.org and CM
CPU Related
CPU Voltage Control
CPU OC/UC
MSM_SLEEPER mod (max screen off frequency)
Will force the cpu cores to be set at 486Mhz to make battery life better.
Fast Charge
CPU Governor's:
Performance
PowerSave
UserSpace
Ondemand
OndemandX
Conservative
Lulzactive
Interactive
InteractiveX
LionHeart
Smartass2
Adaptive
Hyper
Intellidemand
Abyssplug
AbyssplugV2
Smartass
SmartassH3
Wheatley
BadAss
DanceDance
Intelliactive
SmartMax
Nightmare
AssWax
GPU Related
GPU Voltage Control
GPU OC (480Mhz, and 500Mhz steps)
GPU Governor:
Simple
TCP Congestion Control (Info http://goo.gl/GJ73jf )
Veno Set as default instead of cubic
The following were added
Advanced
BIC
HYBLA
HSTCP
ILLINOIS
LP
SCALABLE
VEGAS
RENO
VENO
YEAH
IO's
deadline
row
cfq
bfq (Default)
noop
sio
vr
zen
fifo
fiops
tripndroid
Dynamic F-Sync
This is a goodie by faux123, so all credits go to him for creating this unique feature !
Many kernels just disable synchronous writes to file to speed up system. While this works neatly, it is also dangerous as processes believe that file writes are actually synced to disk (or mmc media in our case) while this is not yet true ! The gain is a noticeably smoother user experience, but the risk of doing so is to have a corrupted filesystem if the device crashes, user pulls battery, battery fully depletes ... so that the device is turned off unexpectedly. To allow for the benefit, but to minimize the risk, faux123 created dynamic fsync, which while the screen is on, will defer file sync temporarily, but when screen gets turned off, a flush is called to synchronize all outstanding writes keeping your data safe.
SLIMBus OverClocked
This means SLIMbus will use its maximum potential to give the best audio quality for the hardware. Takes advantage of both hardware and the mods from zeroinfinity, also opening the door for more things that were previously limited by this. Researched and experimented by ZeroInfinity and Poondog
I can't remember but does this have profiles like cm?
Sent from my SCH-I535 using Tapatalk
o0BlacknesS0o said:
I can't remember but does this have profiles like cm?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
No we do not
deadman96385 said:
No we do not
Click to expand...
Click to collapse
ok...So far everything seems to be running smoothly except a couple things
d2vzw using PA GApps full modular
1. Play Store wont load...It just sits with the spinner going...Ive had it sitting on this screen for 20 minutes...tried clearing data and and reopening but no change
2. Contacts synced but no pictures
3. Some kind of sync error with Calendar
Didnt check much else cuz i needed to restore a backup due to needing to access certain apps that I couldnt download because of the Play Store issues
o0BlacknesS0o said:
ok...So far everything seems to be running smoothly except a couple things
d2vzw using PA GApps full modular
1. Play Store wont load...It just sits with the spinner going...Ive had it sitting on this screen for 20 minutes...tried clearing data and and reopening but no change
2. Contacts synced but no pictures
3. Some kind of sync error with Calendar
Didnt check much else cuz i needed to restore a backup due to needing to access certain apps that I couldnt download because of the Play Store issues
Click to expand...
Click to collapse
Try flashing slim gapps, just to see if it is a pa gapps issue
deadman96385 said:
Try flashing slim gapps, just to see if it is a pa gapps issue
Click to expand...
Click to collapse
OK... Prolly won't be till later tonight but I used the same pa gapps packet with cm11 without the issue
Sent from my SCH-I535 using Tapatalk
Imei issues still or has that been squashed ? Or is the xfat.zip still required?
Currently on 1/21 beta since 1/23 borked data for me.
Sent from my SCH-I535 using XDA Premium 4 mobile app
DrkGhst87 said:
Imei issues still or has that been squashed ? Or is the xfat.zip still required?
Currently on 1/21 beta since 1/23 borked data for me.
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
All the data issues have been fixed, exfat.zip is only needed now if you have a sd card formatted in exfat.
although it has improved, still having battery charging animation issues on the circle and dotted
Im still on 1/23 build.. I posted on the 4.3 thread about the weird issue i found last nite. This rom still my fav. Great work team Liquid
Sent from my SCH-I535 using Tapatalk
How's camera on this one? Any glitches with video back to camera or FFC? Getting tired of flashing, I just want camera working. I use it a lot.
Sent from my SCH-I535 using Tapatalk
deadman96385 said:
All the data issues have been fixed, exfat.zip is only needed now if you have a sd card formatted in exfat.
Click to expand...
Click to collapse
It took an extra minute, but I was able to get signal with a clean install of the 1/30 version. All is good
Sent from my KitKat Galaxy S3.
Ok, so here's something weird. I have installed the latest build and PA Gapps, when I install the PA Gapps, then reboot it has uninstalled, messaging, browser, and launcher. I then have to pull the apk's from this zipped liquid ROM and install them manually by placing in the system folders. TiBu won't even reinstall them. Anyone run into this?
I clean installed last night everything looks fine.. No problems found
Sent from my SCH-I535 using Tapatalk
m_s_ifland said:
Ok, so here's something weird. I have installed the latest build and PA Gapps, when I install the PA Gapps, then reboot it has uninstalled, messaging, browser, and launcher. I then have to pull the apk's from this zipped liquid ROM and install them manually by placing in the system folders. TiBu won't even reinstall them. Anyone run into this?
Click to expand...
Click to collapse
PA Gapps stock package removes all AOSP apps such as messaging, browser, launcher and keyboard and replaces them with the Google versions, i.e. Hangouts, Chrome, etc..
If you want the aosp versions then you will want the full modular package
Sent from my SCH-I535 using Tapatalk
When on the charger, my screen flickers between the home and lock screen, rendering the phone useless. Any one else? Any ideas?
Sent from my KitKat Galaxy S3.
Phone would not install apps from market at first. The phone rebooted a couple times today on its own, afterwards that apps installed. Other than that no problems here. Did a clean install with Full Modular. Great ROM!
johnnytraveler said:
When on the charger, my screen flickers between the home and lock screen, rendering the phone useless. Any one else? Any ideas?
Sent from my KitKat Galaxy S3.
Click to expand...
Click to collapse
Having the same issue. Just need to keep it on the stock battery icon until the fix.. hopefully in the next build.
johnnytraveler said:
When on the charger, my screen flickers between the home and lock screen, rendering the phone useless. Any one else? Any ideas?
Sent from my KitKat Galaxy S3.
Click to expand...
Click to collapse
Thats dew to the battery animation.. Disable that and should work fine..
Sent from my SCH-I535 using Tapatalk
---------- Post added at 04:49 AM ---------- Previous post was at 04:48 AM ----------
Sent from my SCH-I535 using Tapatalk
Discussion Thread and Other Info for Frosted Kernel
Main Development Thread for Ville is Here: http://forum.xda-developers.com/htc-one-s/development/kernel-frosted-kernel-javelinanddart-t3031529/
Main Development Thread for Evita is Here: http://forum.xda-developers.com/one-x-att/development/kernel-frosted-kernel-javelinan-t3039320
Main Development for M4 is Here: http://forum.xda-developers.com/htc...kernel-frosted-kernel-javelinanddart-t3045541
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. :P
* blah blah blah you get the point.
*/
Sample Voltage Tables:
My Voltage Table:
This thread is to keep my development thread a little cleaner.
Enjoy and Happy Flashing!
Credits and Thanks:
Will Update Later
Bricked Edition
What is Bricked Edition?
Bricked Edition is the version of Frosted Kernel with @show-p1984's MSM_MPDECISION and MSM_THERMAL
What is the focus of Bricked Edition?
Speed and Stability as well as decent battery life and no overheating.
Why would I choose Bricked Edition?
If you prefer @show-p1984's MSM_MPDECISION and MSM_THERMAL over @faux123's Intelli_Plug and Intelli_Thermal
Sample Configurations:
My Configuration:
Intelli Edition
What is Intelli Edition?
Intelli Edition is the version of Frosted Kernel with @faux123's Intelli_Plug and Intelli_Thermal
What is the focus of Intelli Edition?
Speed and Stability as well as good battery life and no overheating.
Why would I choose Intelli Edition?
If you prefer @faux123's Intelli_Plug and Intelli_Thermal and you want better battery life.
Sample Configurations:
My Configuration:
Void Edition
What is Void Edition?
Void Edition is Bricked Edition with more features and hopefully better performance
What is the focus of Void Edition?
Speed, Stability, Battery Life, and Customizability
Why would I choose Void Edition?
If you prefer @show-p1984's MSM_MPDECISION and MSM_THERMAL over @faux123's Intelli_Plug and Intelli_Thermal and if you love tweaking your phone a lot
Pros and Cons of the EditionsBricked Edition:
Pros:
Fast
Stable
Lots of Tweaks for MSM_MPDEC and MSM_THERMAL
Good Battery Life (with badass governor)
Cons:
Actually none that I can think of
Intelli Edition:
Pros:
Quick
Stable
Kinda shortchanged on tweakability
Good Battery life
Cons:
Lags a lot depending on the governor
Void Edition:
Bricked Edition + More Features + More Speed
Pros:
All of Bricked Editions
Lots of Tweaks and Speed
Cons:
None that I can think of actually
FAQQ: What is MSM_THERMAL?
A: Kernel based 3-phase thermal control!
This replaces your /system/bin/thermald binary which is renamed by the installer to thermald_bck.
It will throttle your cpu speed to keep it cool and unleash it if the cpu has cooled down enough. (3 phases: low, mid and high)
Check /sys/kernel/msm_thermal/conf/ for the thermal configuration
Q: What is MSM_MPDECISION
A: 100% kernel based multi core decision! (should cpu1 be online or not?)
This replaces your /system/bin/mpdecision binary which is renamed by the installer to mpdecision_bck.
Check /sys/kernel/msm_mpdecision/conf/ for the configuration.
Q: What is MSM_MPDECISION Input Boost?
A: This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value (look below) on every online cpu. This boosts overall reaction times and smoothness a lot.
Q: What is Sweep2Wake?
A: You "Sweep" your fingers across the capacitive buttons to the right in order to wake the screen up
Q: What is Sweep2Sleep?
A: Sweep2Wake but sweeping to the left to turn the screen off
Q: What is DoubleTap2Wake?
A: You double tap one of the capacitive buttons (set which one in trickstermod) to wake it up
Q: What is DoubleTap2Sleep?
A: DoubleTap2Wake except it turns the screen off
Q: What is Pocket Detection?
A: It tries to detect if your phone is in a pocket. If it is, the aforementioned wake control will be disabled
Q: What is -O3 Optimization?
A: It's a GCC Optimization that compiles faster, more optimized code
Q: What are TCP Congestion Control Algorithms?
A: http://en.wikipedia.org/wiki/TCP_congestion-avoidance_algorithm
Q: What is a CPU Governor?
A: It decides how the CPU should be used
Q: What is a GPU Governor?
A: Same thing as CPU Governor but for GPUs
Q: What is an I/O Scheduler?
A: Like a CPU Governor for Input Output (file system) Events
Q: What is Fast Charge?
A: If enabled, It forces your phone to detect a USB Port as an Outlet to Speed Up Charging (depends on the output capacity of the USB Port
Q: What is FRANDOM?
A: A fast pseudo-random number generator
Nice one...Glad to see that Bubba is not dead and it's features survived (even if with another name). Thank you all involved in this project and maybe we will see a Lollipop kernel too
Rapier said:
Nice one...Glad to see that Bubba is not dead and it's features survived (even if with another name). Thank you all involved in this project and maybe we will see a Lollipop kernel too
Click to expand...
Click to collapse
+1... Very thanks javelinanddart
And we will see a Lollipop kernel too???
Winstarshl said:
+1... Very thanks javelinanddart
And we will see a Lollipop kernel too???
Click to expand...
Click to collapse
@Rapier
Possibly, its in my rainl branch but idk if it's functional, i'll try compiling it later
and I have to have some kind of originality
i added frandom support and 4 more io schedulers and OC up to 2.1 and im compiling that right now
javelinanddart said:
@Rapier
Possibly, its in my rainl branch but idk if it's functional, i'll try compiling it later
and I have to have some kind of originality
i added frandom support and 4 more io schedulers and OC up to 2.1 and im compiling that right now
Click to expand...
Click to collapse
For 4.4 or for 5.0 cause I didn't understood right. Right now I cannot test this kernel since I'm on CM12 Lollipop but I'll test it on Candy and LiquidSmooth probably tomorrow or this night
Rapier said:
For 4.4 or for 5.0 cause I didn't understood right. Right now I cannot test this kernel since I'm on CM12 Lollipop but I'll test it on Candy and LiquidSmooth probably tomorrow or this night
Click to expand...
Click to collapse
for 4.4
we have cm12 already??? where?!?!
javelinanddart said:
for 4.4
we have cm12 already??? where?!?!
Click to expand...
Click to collapse
:laugh: http://forum.xda-developers.com/htc-one-s/development/rom-cyanogenmod-12-lollipop-htc-one-s-t2946468 you not see??? this post?
javelinanddart said:
for 4.4
we have cm12 already??? where?!?!
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/showthread.php?t=2946468
Sent from nowhere over the air...
Winstarshl said:
:laugh: http://forum.xda-developers.com/htc-one-s/development/rom-cyanogenmod-12-lollipop-htc-one-s-t2946468 you not see??? this post?
Click to expand...
Click to collapse
Yeah i just saw it and I think I'm going to stick with 4.4 (CM11) but I'll work on development for CM12 and you and @Rapier can test it when im done working on it
javelinanddart said:
Yeah i just saw it and I think I'm going to stick with 4.4 (CM11) but I'll work on development for CM12 and you and @Rapier can test it when im done working on it
Click to expand...
Click to collapse
Of course
Sent from nowhere over the air...
javelinanddart said:
Yeah i just saw it and I think I'm going to stick with 4.4 (CM11) but I'll work on development for CM12 and you and @Rapier can test it when im done working on it
Click to expand...
Click to collapse
Yes of course, I'm only for it, if need any tests, write)
And now i test this kernel on cm 4.4)
@Rapier @Winstarshl
New version out for 4.4, check the AFH or the downloads tab
added 2.1GHz and 4 new i/o schedulers (fifo, vr, zen, and tripndroid)!!
Going to work on Lollipop now, wish me luck!
javelinanddart said:
@Rapier @Winstarshl
New version out for 4.4, check the AFH or the downloads tab
added 2.1GHz and 4 new i/o schedulers (fifo, vr, zen, and tripndroid)!!
Going to work on Lollipop now, wish me luck!
Click to expand...
Click to collapse
Okey no test new ver. 4.4...
Goooooog luck for dev to Lollipop)))
and yet, I'm a little advertised on your core on 4pda)
________
UPD: Ohhh this is the first kernel on which I have earned FauxSound - nice, very nice) Very thanks fotr this too)
UPD2: Now tested last version ... and set interactive with VR; .......until all wonderfully)
Winstarshl said:
Okey no test new ver. 4.4...
Goooooog luck for dev to Lollipop)))
and yet, I'm a little advertised on your core on 4pda)
________
UPD: Ohhh this is the first kernel on which I have earned FauxSound - nice, very nice) Very thanks fotr this too)
UPD2: Now tested last version ... and set interactive with VR; .......until all wonderfully)
Click to expand...
Click to collapse
@rmbq added Faux Sound I added VR...
OC past 1809 is completely unstable, so I'll disable that
javelinanddart said:
@rmbq added Faux Sound I added VR...
OC past 1809 is completely unstable, so I'll disable that
Click to expand...
Click to collapse
Ohhh this is very nice rezult) Seed)
1809 and VR))) Very good)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}