I've tried the following:
1) Installing HTC Sync Manager and HTC Sync (the older version of Sync Manager)
2) Installing the drivers included with hasoon's All-in-One Toolkit.
Neither works. Both methods result in a device labeled "E:" showing up under "Portable Devices" in Device Manager, but adb devices shows no devices, and if I choose on the phone to use it as a disk drive, it does not show up under My Computer.
I previously had a Galaxy Nexus and I had the adb usb drivers installed for that. The only thing I can think of is that the computer is somehow still defaulting to those drivers instead of using the HTC drivers, but I don't know how to solve that problem, if that is even the problem.
Any advice would be greatly appreciated!
Oh, and I also had the android-sdk installed for my Galaxy Nexus. Any chance that completely uninstalling it would help?
I had the same problem but i just figured out how to make my PC to see the HTC One S
(My Windows 7 is in Italian, so I don't know the exact translation for the links)
Start -> Right click on Computer -> Manage -> Devices -> Select the HTC Android Phone USB Device you will have in "DVD/CD-ROM", right click on it and "Deactivate" it, then you have to right click the other HTC Android Phone USB Device you will have under "Disc units" or something like that and right click it, then "Software update" (I repeat, I don't know how the buttons will be in English since I'm on Italian windows, but it'd be similar) and select the second button "Search driver software in my computer" then again the button below "Choose manually" and then just click on "Disc unit" and finally "Next" and it should work...
Hope it helped!
chrikenn said:
I've tried the following:
1) Installing HTC Sync Manager and HTC Sync (the older version of Sync Manager)
2) Installing the drivers included with hasoon's All-in-One Toolkit.
Neither works. Both methods result in a device labeled "E:" showing up under "Portable Devices" in Device Manager, but adb devices shows no devices, and if I choose on the phone to use it as a disk drive, it does not show up under My Computer.
I previously had a Galaxy Nexus and I had the adb usb drivers installed for that. The only thing I can think of is that the computer is somehow still defaulting to those drivers instead of using the HTC drivers, but I don't know how to solve that problem, if that is even the problem.
Any advice would be greatly appreciated!
Oh, and I also had the android-sdk installed for my Galaxy Nexus. Any chance that completely uninstalling it would help?
Click to expand...
Click to collapse
Try this first:
Install drivers on you PC, as you have done. Also don't forget to enable "Debugging mode" in settings. After that, when you connect phone to PC, don't select anyhing, leave it at default of "just charging".
If after the above it still won't work, then you will have to:
1) Uninstall the drivers that you installed from the toolkit.
2) You will need to change how windows handles installation of drivers, once the device is connected.
a) Right click on "Computer", then properties.
b) From the left, click on Advances System Settings
c) Click on Hardware tab.
d) Click on the second button "Device Installation Settings"
e) If you have "Yes..." selected, select "No" instead.
f) Now select "Install driver from Win Update if it is not found on my computer and save!
3) Restart you PC
4) Go to the Hasoon's All-in-One Toolkit folder and install HTC drivers again. Just make sure your phone isn't connected at this time.
5) After intallation is done, just connect you phone. Make sure "debbuging icon" is present on the phones notification bar and that is it, you don't need to enable usb storage mode.
Hope it helps.
Are you getting errors like "device not found" or "device offline" while trying to run ADB commands? Here's a quick way to troubleshoot your problem on Windows.
Steps
1. Ensure USB Debugging is enabled in Developer Options.
2. Verify current Google USB Driver is installed and that Device Manager is using that driver.
3. Update to latest version of ADB.
1. Ensure USB Debugging is enabled in Developer Options.
Enable Developer Options by going to Settings -> About Phone and tapping on "Build Number" multiple repeated times. You will be greeted with "You are a developer."
Now, under Settings -> Developer Options, ensure you check the box for "USB debugging."
2. Verify current Google USB Driver is installed and Device Manager is using that driver.
You may skip this step if Device Manager lists your phone as "Android Phone -> Android Composite ADB Interface." If it does not, this is likely your root cause.
Go to the Google USB Driver page and download the latest driver directly from Google. Extract the zip file to a folder you know and will remember in the future.
Open up Device Manger in Windows with your Nexus 5 connected. Whatever your Nexus 5 is currently detected as, right click on it and select Properties. Then, in the Driver tab, hit "Uninstall." If available, select "Delete the driver software for this device." and hit "OK." It will remove the old drivers.
Restart your computer.
After restarting, reconnect your Nexus 5. It should be recognized as an unknown device in the Device Manager. (If it isn't, try the previous driver deletion steps again.)
Right click on the unknown Nexus 5 device, choose Properties, and in the Driver tab again select "Update driver." Browse your computer manually by putting in the path to the new Google USB Drivers you unzipped to a folder of your choice in the beginning of this step. Choose next and your drivers should install! You'll know everything completed successfully when you see the phone listed under "Android Phone -> Android Composite ADB Interface" in Device Manager.
This is the most finicky process, so don't be afraid to reboot your computer a time or two and repeat these steps if they don't work on the first try.
3. Update to latest version of ADB.
This is a crucial step. The new version of ADB is required to work with the "USB debugging authorizations" setting.
Perhaps you know how to update ADB, in which case, just do it. However, here's a detailed manual approach to download JUST the adb suite from the SDK:
Go to the Google Android SDK website and choose "Use An Existing IDE" and click the "Download the SDK Tools for Windows." This will allow you to download only an 80 MB file rather than the whole 400 MB suite.
Install the SDK tools exe to a folder of your choosing.
Run SDK Manager and uncheck everything except for "Android SDK Platform-tools." This is the ADB and Fastboot bundle. Install that.
Navigate to your SDK Path as indicated at the top of your Android SDK Manager window. You will now see a freshly downloaded platform-tools folder containing ADB.exe, Fastboot.exe, and a host of other files. That folder is now your updated, portable ADB tools folder. You can move it anywhere you like as long as you run ADB from a command prompt window set to that directory.
After you've followed these procedures, running "ADB Devices" should trigger a prompt on your device to accept the RSA fingerprint of your computer. Accept it, and now all should be working as intended!
Questions? Ask below!
Crowd-sourced solutions.
Windows 8 Diagnosis
Yorus said:
The following worked for me, since all of the suggestions mentioned here didn't work for me:
If you use a Windows 8.1 enterprise N or KN edition, install the Microsoft Media Feature Pack :
http://support.microsoft.com/kb/2929699/en
Sounds too simple to be true but work instantly for me.
Hope it works you some of the people here looking for a solution
Click to expand...
Click to collapse
Setting up ADB and Fastboot commands to work from ANY path (credit to original author in quote).
Chromium_ said:
Setup, Preparation and Prerequisites
ADB and Fastboot Installation
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only) or get a slimmed version containing only the essential components here (Thanks @El Daddy)
Extract the zip and place the android-sdk-windows folder on the root of your hard drive. (the path should be like this: C:\android-sdk-windows)
**If you chose to download the slimmed sdk skip to step 5**
Only if you downloaded the full sdk: Go into the folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):
- Tools > Android SDK Tools, Android SDK Platform-tools
- Extras > Android Support Library, Google USB Driver
Only if you downloaded the full sdk: Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If not, repeat the step above.
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
(OR WHATEVER PLATFORM-TOOLS DIRECTORY YOU PICKED)
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
Click to expand...
Click to collapse
The importance of being careful with your command choices.
MkVsTheWorld said:
"Be sure to use the CORRECT adb/fastboot commands, double-check the path on all commands, and double-check the existence of each file you are working with."
I hate to admit this, but I couldn't figure out why nothing was appearing in the device list when I did "adb devices", while the phone was in Fastboot. I did everything from A-Z and tore my hair out for 30 minutes until it hit me, my phone's in Fastboot. I've been messing with Android for 3+ years and made a newbie mistake lol.
Click to expand...
Click to collapse
Fixing MTP device not showing up after installing ADB drivers.
dbareis said:
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/showpost.php?p=37930602&postcount=937". I then uninstall the device and drivers and performed a hardware scan to get it to work. I also added a "...PID_4EE2&MI_01" line but I am not positive that was required.
Hope that helps someone.
Click to expand...
Click to collapse
Whyzor said:
You should also mention what worked for me in post #16 (& confirmed by a few others in other threads). That is to toggle Settings - Storage - USB Connection type from Camera to Mass storage & also the debugging mode on & off.
Click to expand...
Click to collapse
Ashcunak said:
Op might wanna tack this onto the bottom of the main post as a last resort for folks to "start over" and be sure they have no old drivers installed.
http://www.nirsoft.net/utils/usb_devices_view.html
i had to use this program (right click run as admin if permissions are set) to remove EVERY single android related driver in order to get mine working.. turns out i had so many old ones in my system and some i couldn't remove from the device manager, the buttons wouldn't become click able..
Click to expand...
Click to collapse
CrazyIvan said:
I've tried everything and cannot get the authorization prompt to pop up on my Nexus5 so when I run adb devices the phone shows up as "unauthorized". Any suggestions? This is with updated sdk and USB drivers. Device manager shows phone as "Android Phone->Android Composite ADB Interface" and "Portable Device->Nexus 5". Tried toggling between MTP/PTP, USB Debugging on/off, stopping and starting the adb server (latest version 1.0.31).
Thanks in advance!
EDIT: Finally got the ba$tard! Run this for some adb debug logging:
adb kill-server
set ADB_TRACE=all
adb nodaemon server
Go and look back at the output from the start for any errors. In my case it couldn't mkdir in c:\users\administrator, which for me doesn't exist. I changed the Windows environment variable "ANDROID_SDK_HOME" to point to "C:\users\<my account dir>", closed the DOS window, re-ran the commands and I got prompted for the permission on my phone. Yee ha! Now I can fire up hello world with the SDK on my phone. Praise be to Google search for turning up this thread that told me about the debug logging.
Click to expand...
Click to collapse
SonicAngel said:
I just rooted my N5 (using the guide on this forum so I had no other drivers other than Google's SDK) and after unlocking my bootloader windows did not recognize my phone so I couldn't go further. Upon checking device manager I saw something called "AOSP on Hammerhead", a quick online search found a lot of very complicated answers (uninstall all drivers, restart, install adb drivers was one example).
Instead of all that I just right clicked "AOSP on Hammerhead", chose Update Driver, manually choose driver, went to "Android bootloader", chose the default driver from "Google inc" manually and that for some reason worked.
I figured this might help someone since the other solutions I found really were very long.
Click to expand...
Click to collapse
Questions? Ask below!
MaxRabbit said:
Reserved.
Questions? Ask below!
Click to expand...
Click to collapse
Hey man, thanks for the tutorial, I seem to still have trouble with this. Followed all the steps, even reset the device, to no avail. Anyone else having issues?
KTT16 said:
Hey man, thanks for the tutorial, I seem to still have trouble with this. Followed all the steps, even reset the device, to no avail. Anyone else having issues?
Click to expand...
Click to collapse
You're welcome! What shows up in your Device Manager now?
MaxRabbit said:
You're welcome! What shows up in your Device Manager now?
Click to expand...
Click to collapse
Hey thanks for the quick reply! I got it to work finally via: http://forum.xda-developers.com/showthread.php?t=2507905
Great tips and tutorial though..so stoked to have this phone!
KTT16 said:
Hey thanks for the quick reply! I got it to work finally via: http://forum.xda-developers.com/showthread.php?t=2507905
Great tips and tutorial though..so stoked to have this phone!
Click to expand...
Click to collapse
What step exactly did you take that fixed it?
MaxRabbit said:
What step exactly did you take that fixed it?
Click to expand...
Click to collapse
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
KTT16 said:
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
Click to expand...
Click to collapse
Ahh, your problem with my instructions then were that you weren't running ADB from inside the platform-tools folder
Definitely! I seriously got frustrated for a second and forgot how to read!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Not showing up as removable storage
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
same issue on my side...I canot use MTP only PTP...I also tryed new drivers from SDK but has not solved the problem
Alex
JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
This is a really strange problem :-/ what does it show up as when you are in device manager on your work computer?
MaxRabbit said:
This is a really strange problem :-/ what does it show up as when you are in device manager on your work computer?
Click to expand...
Click to collapse
It shows up as a 'Portable Device' -> 'Portable Media Player' (I was thinking it was a 'Device with Removable Storage').
I have full access to the internal file folders here at work.
Here's a suggestion for something to add to the OP.
"Be sure to use the CORRECT adb/fastboot commands, double-check the path on all commands, and double-check the existence of each file you are working with."
I hate to admit this, but I couldn't figure out why nothing was appearing in the device list when I did "adb devices", while the phone was in Fastboot. I did everything from A-Z and tore my hair out for 30 minutes until it hit me, my phone's in Fastboot. I've been messing with Android for 3+ years and made a newbie mistake lol.
Sent from my Nexus 5 using Tapatalk
JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
I have the same problem and done the same exact things u did. any help?
I'm having no luck with unlocking bootloader of my Nexus 5 today. I've unlocked previous Android devices fine, but this one for some reason it's not detecting it in USB drivers. It shows as Other devices -> Nexus 5 in device manager, but when I select update driver & navigate to the dir where Android SDK/extras/google/usb_driver
Windows was unable to install your Nexus 5
Windows could not find driver software for your device.
I updated the OTA that came right away earlier, maybe this caused the Windows USB drivers to not work match the updated OTA build? Is there a way to ensure that old windows driver is uninstalled? I can only select 'uninstall', but not the 'remove old driver files' some docs mention. Also when I connect my Nexus 4 it's fine, and enabling debugging mode prompts for to allow the security fingerprint of the PC. But this prompt doesn't appear on Nexus 5, not sure if it's supposed to happen AFTER the PC is able to communicate with the N5 or not, which is the step that I'm stuck on. Tried it on another Windows 7 system and same problem.
UPDATE: Well my Nexus 4 worked fine along with adb until a few minutes ago, after toggling the Debugging Mode on the phone, it's not recognized on Windows now either. So definitely think it's a Windows 7 or Google USB Driver issue. Any pointers on how to start over (without reinstalling Windows) would be appreciated.
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
aluxzen said:
same issue on my side...I canot use MTP only PTP...I also tryed new drivers from SDK but has not solved the problem
Alex
Click to expand...
Click to collapse
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/showpost.php?p=37930602&postcount=937". I then uninstall the device and drivers and performed a hardware scan to get it to work. I also added a "...PID_4EE2&MI_01" line but I am not positive that was required.
Hope that helps someone.
Whyzor said:
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
Click to expand...
Click to collapse
That... Thankyou for that info.
I was able to get ADB to work but was not able to get the device to popup as a storage device. That fixed it. Thanks!
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/show...&postcount=937".
Click to expand...
Click to collapse
Thanks, that link was really helpful! I struggled with the correct detection before (seems I had some old drivers for my last phone on that windows installation...)
Whyzor said:
I'm having no luck with unlocking bootloader of my Nexus 5 today. I've unlocked previous Android devices fine, but this one for some reason it's not detecting it in USB drivers. It shows as Other devices -> Nexus 5 in device manager, but when I select update driver & navigate to the dir where Android SDK/extras/google/usb_driver
Windows was unable to install your Nexus 5
Windows could not find driver software for your device.
I updated the OTA that came right away earlier, maybe this caused the Windows USB drivers to not work match the updated OTA build? Is there a way to ensure that old windows driver is uninstalled? I can only select 'uninstall', but not the 'remove old driver files' some docs mention. Also when I connect my Nexus 4 it's fine, and enabling debugging mode prompts for to allow the security fingerprint of the PC. But this prompt doesn't appear on Nexus 5, not sure if it's supposed to happen AFTER the PC is able to communicate with the N5 or not, which is the step that I'm stuck on. Tried it on another Windows 7 system and same problem.
UPDATE: Well my Nexus 4 worked fine along with adb until a few minutes ago, after toggling the Debugging Mode on the phone, it's not recognized on Windows now either. So definitely think it's a Windows 7 or Google USB Driver issue. Any pointers on how to start over (without reinstalling Windows) would be appreciated.
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
Click to expand...
Click to collapse
Thank you for sharing your solution.
after bootloading (for the first time with youtube "highonandroid") after in recovery mode, my windows 10 could not detect my phone's storage.
I could not find the phone in "device manager" setting, and via control panel/printers and devices, there is a oneplus 6, where the update button is inactive.
Where can the official oneplus 6 drivers and software be downloaded, and how can it be double checked if all is installed properly?
I hope to root my phone after I am able to copy from my pc to my phone, to enable stereo speakers and always on display.
thanks in advance! B)
did you use the drop down menu on the phone and put it on 'transfer files' or something like that?
never mind, just found howto enable oneplus 6 in device manager
after connecting the phone with the windows 10 laptop, rightclick on the (not accessible) drive, and update driver.
Instantly shown in the device manager, just unbricked my phone with downloaded software on pc !:victory:
Hi, I've got an old S5 with a broken screen. There's no image going on and there's no indication that the touchscreen is working.
I'm not looking to recover data, I'm looking to play around with it by controlling it from my PC. Last I remember, the phone is running a Cyanogenmod OS (I don't think LineageOS was around at that time) with either TWRP or CWM recovery, but I'd bet on TWRP.
Now: the device reaches the OS properly, I can tell because if I try to turn the ringing sound up it gives me an audio feedback.
If I connect it to a PC from the OS:
- the phone shows up in Windows Explorer as "SM-G900F"
- Device Manager shows me a "SAMSUNG Mobile USB Composite Device" under Universal Serial Bus controllers
However I cannot access any files (Windows Explorer shows the device as empty), and if I attempt to 'adb devices' in the console it shows me an empty devices list.
Now, I suspect that USB debugging might be off. So I also tried connecting it to a PC from recovery and the exact same thing as above can be observed, PLUS:
- Device manager also shows me a "SAMSUNG Android Phone" list which can be expanded to show me one entry called "SAMSUNG Android ADB Interface"
However it's the same as before, no files available and 'adb devices' shows an empty list.
Now I heard that I can theoretically enable USB debugging through ADB, by writing to a config file. That would allow me to enable USB debugging and try something like Vysor in order to control the phone from my PC.
However that's a moot point until I can figure out why the ADB service on my PC isn't seeing the device. Any help would be greatly appreciated, and if you need more info I can provide it.
Extra info:
- I installed Samsung USB drivers at some point while trying to make it work
- Windows Explorer shows a phone icon for this device, and if I recall correctly that's what happens when it's connected through MTP (Mass Storage should show it like a memory card)
_sepiroth said:
Hi, I've got an old S5 with a broken screen..........
Click to expand...
Click to collapse
I've never experienced this situation myself but, I've seen that the following thread has worked for many individuals.
https://forum.xda-developers.com/showthread.php?t=2786395
Good Luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Apple Macintosh.
Ibuprophen said:
I've never experienced this situation myself but, I've seen that the following thread has worked for many individuals.
https://forum.xda-developers.com/showthread.php?t=2786395
Good Luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Apple Macintosh.
Click to expand...
Click to collapse
Thanks a bunch, that pointed me in the right direction with my research! I solved my issue, I can now control my phone from my PC.
By doing this I ran into a couple of problems, I'm going to describe them and their solutions:
Problem 1: couldn't ADB into the device when in Recovery Mode. That is because after a long head scratching session I came to the conclusion that I didn't have TWRP Recovery installed (I had Philz Touch CWM Recovery and LineageOS 14.1 instead).
Solution 1: ADB mode is enabled in TWRP by default. So I flashed the latest TWRP through Odin, ADB instantly started working afterwards in Recovery Mode.
Problem 2: USB Debugging was disabled inside the OS.
Solution 2: from the thread that Ibuprophen posted, you can enable USB debugging in your OS by opening an ADB shell into your device and modify the build.prop like so
Code:
Adb shell
echo "persist.service.adb.enable=1" >>/system/build.prop
echo "persist.service.debuggable=1" >>/system/build.prop
echo "persist.sys.usb.config=mass_storage,adb" >>/system/build.prop
reboot
Problem 3: /system was empty so there was no build.prop. If I attempted to create a build.prop file it wouldn't be saved after a device reboot, so USB debugging still didn't work.
Solution 3: it seems like TWRP doesn't mount /system by default, only /data. You can mount it manually through ADB like this:
Code:
mount -o rw /dev/block/bootdevice/by-name/system /system
I found this out from this stackexchange question: https://android.stackexchange.com/q...data-partitions-in-recovery-mode-in-adb-shell
Problem 4: When an app tries to use USB Debugging you need to allow it to do so from the phone. Since the screen was broken, I couldn't do this.
Solution 4: You'll need to push a public key to your device with ADB. Boot into Recovery Mode and make sure your device is recognized by your PC and type
Code:
adb push <path to adbkey.pub on your PC> /data/misc/adb/adb_keys
This solution is from: https://stackoverflow.com/questions...b-rsa-key-with-broken-touch-screen-on-android
This will make sure that you won't need to confirm debugging permissions for apps coming from your machine.
So for anyone who has a broken phone screen (my screen is dead and touchscreen/touch buttons are kaput too) and wishes to control their phone from their PC but USB debugging is disabled:
1. Boot device in TWRP Recovery (flash it if you don't have it)
2. ADB into the device
3. Make sure /system is mounted (if it's empty it means it's not mounted), else mount it manually like in Solution 3
4. Configure build.prop to have USB Debugging enabled like in Solution 2
5. Push your public key to the device like in Solution 4
6. Restart the phone (into its OS)
7. Download the Chrome extension called Vysor and launch it
8. Connect your phone through a USB cable
9. The device should appear in Vysor, connect to it and have fun controlling it
Note that if you just want to backup your files, steps 1 + 2 are sufficient. After making sure ADB works you can just 'adb pull' all your files which should be located in /sdcard. Google it, it's easy to find.
The same goes for backups, you can do them directly through ADB.
Again, thanks Ibuprophen!
Vysor does not work on all graphic cards. a good free alternative is scrcpy
btw instead of flashing twrp, you can flash a modified system partition with proper entries in build.prop (for those with no custom recovery available)
aIecxs said:
Vysor does not work on all graphic cards. a good free alternative is scrcpy
btw instead of flashing twrp, you can flash a modified system partition with proper entries in build.prop (for those with no custom recovery available)
Click to expand...
Click to collapse
Very well pointed out, thanks for this.
hi guys I need help to recover some personal photos I had saved on my device. The phone has a broken screen and touch so I cannot use a mouse or try to blindly unlock it, but it has been rooted and usb debugging is enabled; unfortunately my pc is not authorized by the phone and I have no way to authorize it through the pop up without a screen. I have searched around many forums to find a solution but it seems every time there was something wrong, so I need some help.
The solution that got me the nearest to a conclusion that I tried are:
using adb in custom recovery (which I do have) and trying commands like "adb pull /sdcard" which resulted in "pull: building file list... 0 files pulled. 0 files skipped.", I don't understand why it's unable to pull any file.
trying to authorize usb debugging for my pc through adb by "adb push adb_keys /data/misc/adb", adb_keys is the adbkey.pub file in the .android folder renamed. I can confirm i pushed them since "adb pull /data" pulled "data/adb/misc/adb_keys" as the only file, but I still don't have authorization
I'm not too literate in this kind of commands so please be patient but I really need help
RECAP OF MY PHONE STATUS
Xiaomi Mi 10 5G is the device
both screen and digitizer broken, I'm not able to see the screen or use touch (but I'm 100% sure the phone still works)
Android 12 rom (xiaomi.eu stable)
custom recovery available
rooted device
usb debugging enabled
no device authorized by the phone for usb debug
I found somewhere on xda that the problem could be solved by mounting/unmountind sdcard, but I have no ideea hoe to do that
damndaniel0 said:
hi guys I need help to recover some personal photos I had saved on my device. The phone has a broken screen and touch so I cannot use a mouse or try to blindly unlock it, but it has been rooted and usb debugging is enabled; unfortunately my pc is not authorized by the phone and I have no way to authorize it through the pop up without a screen. I have searched around many forums to find a solution but it seems every time there was something wrong, so I need some help.
The solution that got me the nearest to a conclusion that I tried are:
using adb in custom recovery (which I do have) and trying commands like "adb pull /sdcard" which resulted in "pull: building file list... 0 files pulled. 0 files skipped.", I don't understand why it's unable to pull any file.
trying to authorize usb debugging for my pc through adb by "adb push adb_keys /data/misc/adb", adb_keys is the adbkey.pub file in the .android folder renamed. I can confirm i pushed them since "adb pull /data" pulled "data/adb/misc/adb_keys" as the only file, but I still don't have authorization
I'm not too literate in this kind of commands so please be patient but I really need help
RECAP OF MY PHONE STATUS
Xiaomi Mi 10 5G is the device
both screen and digitizer broken, I'm not able to see the screen or use touch (but I'm 100% sure the phone still works)
Android 12 rom (xiaomi.eu stable)
custom recovery available
rooted device
usb debugging enabled
no device authorized by the phone for usb debug
Click to expand...
Click to collapse
There is a way to do it, but it costs money
@damndaniel0
If USB-MTP mode is enabled on phone - what should be default - then you can access all user-data stored in /storage/emulated/0 directory where among others photos are stored.
See also here:
MTP USB Device Driver Windows 10 64bit Driver | Device Drivers
MTP or (Media Transfer Protocol) is a set of custom extensions to the Picture Transfer Protocol (PTP) devised by Microsoft, to allow the protocol to be used for devices other than digital cameras, for example digital audio players such as MP3 players, and other portable media devices, for...
oemdrivers.com
xXx yYy said:
@damndaniel0
If USB-MTP mode is enabled on phone - what should be default - then you can access all user-data stored in /storage/emulated/0 directory where among others photos are stored.
See also here:
MTP USB Device Driver Windows 10 64bit Driver | Device Drivers
MTP or (Media Transfer Protocol) is a set of custom extensions to the Picture Transfer Protocol (PTP) devised by Microsoft, to allow the protocol to be used for devices other than digital cameras, for example digital audio players such as MP3 players, and other portable media devices, for...
oemdrivers.com
Click to expand...
Click to collapse
If you mean simply to connect the phone through usb to pc, I cannot do that because MIUI asks everytime if I want to transfer photos, files or just charge with a pop up on screnn (which I obviously cannot do)
iBowToAndroid said:
There is a way to do it, but it costs money
Click to expand...
Click to collapse
what would it be
damndaniel0 said:
If you mean simply to connect the phone through usb to pc, I cannot do that because MIUI asks everytime if I want to transfer photos, files or just charge with a pop up on screnn (which I obviously cannot do)
Click to expand...
Click to collapse
Not in system but in custom recovery (which you do have).
Timmmmaaahh! said:
Not in system but in custom recovery (which you do have).
Click to expand...
Click to collapse
Honestly I did not try, but I don't remember the phone directory showing up in windows file explorer after connecting the phone in recovery mode, I'll try againg when I'm home and I'll let you know
anyway I checked and no, I cannot access phone files
In Recovery mode you should can run
Code:
adb devices
adb pull <LOCATION_OF_DATA_OF_INTEREST> <STORAGE_LOCATION_ON_PC>
xXx yYy said:
In Recovery mode you should can run
Code:
adb devices
adb pull <LOCATION_OF_DATA_OF_INTEREST> <STORAGE_LOCATION_ON_PC>
Click to expand...
Click to collapse
unfortunately the result of this operation is always "pull: building file list... 0 files pulled. 0 files skipped". I tried already to pull form /sdcard, /storage, /data. Am I getting the location wrong?