My screen goes black when making calls and will not come back no screen protector no case happens no matter what ROM I'm using please help
If it's a newer cm12 ROM you need to flash the alpha modem that can be found in the modem thread that has all modem. This modem will only work properly on newer cm12 lollipop ROM though, it'll break the proximity sensor on older cm11s based ROM. So make your choice on which way to go from now on
Sent From Lollipopified Bacon Goodness!
ek69 said:
If it's a newer cm12 ROM you need to flash the alpha modem that can be found in the modem thread that has all modem. This modem will only work properly on newer cm12 lollipop ROM though, it'll break the proximity sensor on older cm11s based ROM. So make your choice on which way to go from now on
Sent From Lollipopified Bacon Goodness!
Click to expand...
Click to collapse
Thank you for your response I did not know that could you please link me to the modem thread?
Just download from here and flash in twrp
https://www.androidfilehost.com/?fid=95887005526787630
Sent From Lollipopified Bacon Goodness!
ek69 said:
Just download from here and flash in twrp
https://www.androidfilehost.com/?fid=95887005526787630
Sent From Lollipopified Bacon Goodness!
Click to expand...
Click to collapse
Thank you very much my one plus has been sidelined since this happened
I installed official lollipop, then restored my cm11 Nandroid backup (latest update) - will it work on this?
Same problem here.... I restore to cm11s still have the problem.
Sent from my A0001 using XDA Free mobile app
Download and flash zip https://www.androidfilehost.com/?fid=95784891001607675
Sent from my A0001 using XDA Free mobile app
Did that work on cm11 KitKat?
ek69 said:
Just download from here and flash in twrp
Link removed because I'm not at 10 posts yet, k.
Sent From Lollipopified Bacon Goodness!
Click to expand...
Click to collapse
I had to log in again to say that you're a life saver. Best fix on the Internets. =)
File removed from AndroidHost.
Someone has a clue?
Thanks a lot.
stragnagn said:
File removed from AndroidHost.
Someone has a clue?
Thanks a lot.
Click to expand...
Click to collapse
You don't need that specific modem, any Lollipop modem will be fine. Just grab either of the top two from here:
http://boeffla.df-kunde.de/bacon/modems/
Related
I'm currently running Hyperdrive RLS 16 and want to know if it is possible to go to [Rom][d2vzw][Official][Kitkat - 4.4.2] - Gummy - Nightly's?
Do I just need to follow the instructions or is there more files I need to change within the phone? Basically, I want to know if it will be a simple transition.
Thank You!
:crying:
You should be just fine. Just install like any other ROMs. Don't forget to wipe Data. Make sure you update your recovery to the latest version first BEFORE FLASHING since gummy is Kitkat. This is very important.
Sent from my SCH-I535 using Tapatalk
Cool thanks a ton!
GlitchMob said:
Cool thanks a ton!
Click to expand...
Click to collapse
There are so many people saying different things. Im on 2.4.4.0 is that okay?
GlitchMob said:
There are so many people saying different things. Im on 2.4.4.0 is that okay?
Click to expand...
Click to collapse
2.4..3.1 is the latest for Verizon S3, where did you get TWRP 2.4.4.0 from? That said, KitKat works on TWRP 2.4.3.1 definitely, I'm using it now for SlimKat.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
2.4..3.1 is the latest for Verizon S3, where did you get TWRP 2.4.4.0 from? That said, KitKat works on TWRP 2.4.3.1 definitely, I'm using it now for SlimKat.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
lol no idea. I dont remember its been a while. When I load twrp that is what I see at the top.
GlitchMob said:
lol no idea. I dont remember its been a while. When I load twrp that is what I see at the top.
Click to expand...
Click to collapse
I'm mistaken...badly. You need to be on TWRP 2.6.3.1 in order to flash any KitKat rom. That's what I'm on. KitKat roms will not flash on anything before TWRP 2.6.3.1.
Sent from my SCH-I535 using Tapatalk 4
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Ya I found the latest twrp and installed Gummy. What I want to know is if I want to update to a different nightly do I have to wipe everything and start over?
Sandman-007 said:
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
What about CWM can i use that and if so which ver.?
razorr69 said:
What about CWM can i use that and if so which ver.?
Click to expand...
Click to collapse
Yes, the latest is up on the Rom Manager website.
Sent from my SCH-I535 using Tapatalk 4
Funny I had the same question..
I was going to pose the same question.. Ironically I'm on Hyperdrive RLS 16 also and am either going to the last carbon nightly or maybe something 4.4 ?
My question was do I need to flash the MF1 firmware, but I guess not ?
I loved carbon when I used it before ( last was v 1.7 stable ) but had to flash to stock/TW base to flash my phone to PagePlus and TW is waaaay to clunky for me I can't stand it anymore !!
Edit: Would the new PhilZ work for a KitKat rom ? the new official one ?
cjmcsw87 said:
I was going to pose the same question.. Ironically I'm on Hyperdrive RLS 16 also and am either going to the last carbon nightly or maybe something 4.4 ?
My question was do I need to flash the MF1 firmware, but I guess not ?
I loved carbon when I used it before ( last was v 1.7 stable ) but had to flash to stock/TW base to flash my phone to PagePlus and TW is waaaay to clunky for me I can't stand it anymore !!
Edit: Would the new PhilZ work for a KitKat rom ? the new official one ?
Click to expand...
Click to collapse
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Ok cool thanks snoop, as always you da man ! I'm still on MB1 so I kind of thought so. I Guess I'll give it a whirl after a few and post my results (from philZ)
GlitchMob said:
Ya I found the latest twrp and installed Gummy. What I want to know is if I want to update to a different nightly do I have to wipe everything and start over?
Click to expand...
Click to collapse
Clean flashing is recommended if you don't want to have any issues.
But you're free to dirty flash over an existing nightly if you don't want to clean flash. However, any issues you get are your own issues and should not be reported in the Gummy thread.
david_hume said:
Clean flashing is recommended if you don't want to have any issues.
But you're free to dirty flash over an existing nightly if you don't want to clean flash. However, any issues you get are your own issues and should not be reported in the Gummy thread.
Click to expand...
Click to collapse
That kind of sucks. I'll probably just stick with the most current nightly till they come out with an official one.
Thanks for the response.
SlimSnoopOS said:
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Sorry for the newb ? but where do i look to see what firmware i'm running i havent flashed since synergy which im still running?
Thanks
razorr69 said:
Sorry for the newb ? but where do i look to see what firmware i'm running i havent flashed since synergy which im still running?
Thanks
Click to expand...
Click to collapse
Don't apologize, we all start somewhere. Look in Settings/About Phone/Baseband.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Don't apologize, we all start somewhere. Look in Settings/About Phone/Baseband.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Thats what i thought but wasn't %100 sure because mine is VRLHE. Should i flash it anyway to M1 modem only will i get better speeds and is the radio better. Eventually im going to flash 4.3 or 4.4 just waiting for a daily driver.
DISCLAIMER - I am not to blame if you screw up your phone. Proceed at your own risk.
Thread closed since there is an option now for stock AT&T crap with recovery and international version with recovery, with working google wallet and no carrierIQ or AT&T bloat.
International HERE
Stock AT&T HERE
Web Presence:
Twitter
Google+
YES!!! It will take a long time to flash...did not hang. Just needs time
I will have custom ROM up later tonight.
I will have custom ROM based on International version once it is released and I can get my hands on the KDZ or TOT. This way we do not have to deal with CarrierIQ.
Thanks for this, awesome work.
Sent from my LG-D800 using xda app-developers app
And just like that. Everything is awesome in this world lol. Thank you kind sir.
Sent from my LG-D800 using Tapatalk
Yes!!! You are THE MAN. Thanks so much.
Are you using the aboot from one of the 10x builds? I am pulling the ROM down now but I am concerned that installing this will update my aboot and make it so that going back to a different kernel/ROM will be difficult. I am not all that up on LOKI so perhaps this is just a dumb post :/.
What if we are on the unrooted KitKat ota? Just flash this? Or downgrade, then flash recovery and then flash this?
Sent from my LG-D800 using Tapatalk
xLordNitro said:
What if we are on the unrooted KitKat ota? Just flash this? Or downgrade, then flash recovery and then flash this?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
use lg flash tool to flash back to 10d firmware. root and install recovery. then flash this rom with supersu to get back to where you are now but with root.
plastikman187 said:
Are you using the aboot from one of the 10x builds? I am pulling the ROM down now but I am concerned that installing this will update my aboot and make it so that going back to a different kernel/ROM will be difficult. I am not all that up on LOKI so perhaps this is just a dumb post :/.
Click to expand...
Click to collapse
LG flash tools
xLordNitro said:
What if we are on the unrooted KitKat ota? Just flash this? Or downgrade, then flash recovery and then flash this?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Downgrade,flash recovery and then rom zip and superuser.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
plastikman187 said:
Are you using the aboot from one of the 10x builds? I am pulling the ROM down now but I am concerned that installing this will update my aboot and make it so that going back to a different kernel/ROM will be difficult. I am not all that up on LOKI so perhaps this is just a dumb post :/.
Click to expand...
Click to collapse
when you use lg flash tool to go back to an older firmware, it replaces your aboot with that firmwares aboot. so you have nothing to worry about.
---------- Post added at 12:43 PM ---------- Previous post was at 12:42 PM ----------
@bigfau
we need a custom KK rom from you. GOGOGO.
Ah, OK. So if I'm running houstonn's PA ROM I can't just go into TWRP, wipe everything, and flash this ROM? I first have to downgrade to stock 10d, etc?
Zoide_ said:
Ah, OK. So if I'm running houstonn's PA ROM I can't just go into TWRP, wipe everything, and flash this ROM? I first have to downgrade to stock 10d, etc?
Click to expand...
Click to collapse
If you have a custom recovery just flash both rom zip and superuser. No need to downgrade unless you have stock recovery.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
freebee269 said:
when you use lg flash tool to go back to an older firmware, it replaces your aboot with that firmwares aboot. so you have nothing to worry about.
Click to expand...
Click to collapse
Rad thanks!
Man, thanks for this!! I was just about to go through the entire deal again of going back to 10o and rooting, etc then having AT&T push 10q and KK. Thanks again brother!! Downloading now!
International 4.4.2
AndroidUser00110001 said:
YES!!! It will take a long time to flash...did not hang. Just needs time
I will have custom ROM up later tonight.
I will have custom ROM based on International version once it is released and I can get my hands on the KDZ or TOT. This way we do not have to deal with CarrierIQ.
Click to expand...
Click to collapse
4.4.2 original KDZ for international version is here http://forum.xda-developers.com/showthread.php?t=2664933, lets start development (urray!!!!)
randrew87 said:
4.4.2 original KDZ for international version is here http://forum.xda-developers.com/showthread.php?t=2664933, lets start development (urray!!!!)
Click to expand...
Click to collapse
Nice! Does tap to pay work?
Thanks! I'll have flashable custom ROM tonight or tomorrow depending on how my work day goes.
Sent from my LG-D950 using XDA Premium 4 mobile app
AndroidUser00110001 said:
Nice! Does tap to pay work?
Thanks! I'll have flashable custom ROM tonight or tomorrow depending on how my work day goes.
Sent from my LG-D950 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
jejeje it was just an informative post, sure,if I have the opportunity I'll give you a beer!.
Regards
adding link to FAQ
I just asked you this on another forum, but I don't know if you are tracking that one. Is this 100% stock ATT ROM, other than it being Flashable Zip? That's AWESOME if it is!
SuperSport said:
I just asked you this on another forum, but I don't know if you are tracking that one. Is this 100% stock ATT ROM, other than it being Flashable Zip? That's AWESOME if it is!
Click to expand...
Click to collapse
Yes this is 100% stock. I will have debloated international ROM up in a couple of hours for D800.
last time i flash was dec 2013 version 4.4.2
twrp version 6.3.3 i guess something like that
my nexus version is the ca / us version
what should i do first if wanna get back to flashing again?
new twrp? if i flash a new rom should root it again?
elnitrox said:
last time i flash was dec 2013 version 4.4.2
twrp version 6.3.3 i guess something like that
my nexus version is the ca / us version
what should i do first if wanna get back to flashing again?
new twrp? if i flash a new rom should root it again?
Click to expand...
Click to collapse
Always a good idea to update your recovery to the latest.
Root is IN the rom. I pretty much guarantee that any rom you flash via recovery will be pre-rooted.
If you're unsure of the processes for anything, have a read of all the sticky threads linked in my signature
Flash the latest twrp first, then pick a rom
Latest twrp - https://www.dropbox.com/s/05vh73mstsovz9j/twrp2801.zip?dl=0
Flash in recovery then reboot recovery to check version at the top
Sent from my Android L Nexus 5 via Tapatalk
rootSU said:
Root is IN the rom. I pretty much guarantee that any rom you flash via recovery will be pre-rooted.
Click to expand...
Click to collapse
Unless he wants to flash a stock image
Ben36 said:
Flash the latest twrp first, then pick a rom
Latest twrp - https://www.dropbox.com/s/05vh73mstsovz9j/twrp2801.zip?dl=0
Flash in recovery then reboot recovery to check version at the top
Click to expand...
Click to collapse
on that note, is twrp recommended over CWM? I noticed last week that I had cwm on mine
Bonusbartus said:
on that note, is twrp recommended over CWM? I noticed last week that I had cwm on mine
Click to expand...
Click to collapse
CWM is outdated. Use TWRP or Philz
Bonusbartus said:
Unless he wants to flash a stock image
Click to expand...
Click to collapse
Stock factory images aren't flashed in recovery.. That's why rootsu specifically said recovery
Bonusbartus said:
on that note, is twrp recommended over CWM? I noticed last week that I had cwm on mine
Click to expand...
Click to collapse
Personally, I've faced many issues with twrp in the past and ever since I've started using PhilzTouch (advanced version of cwm), I haven't looked back!
- Sent from an IceCold Hammerhead!
I on the other hand have never ever had any problems with twrp across various devices
Sent from my Android L Nexus 5 via Tapatalk
vin4yak said:
Stock factory images aren't flashed in recovery.. That's why rootsu specifically said recovery
Personally, I've faced many issues with twrp in the past and ever since I've started using PhilzTouch (advanced version of cwm), I haven't looked back!
- Sent from an IceCold Hammerhead!
Click to expand...
Click to collapse
I had a lot of issues with TWRP on my S3. We're you having issues on this device?
Aerowinder said:
I had a lot of issues with TWRP on my S3. We're you having issues on this device?
Click to expand...
Click to collapse
No mate. I was on HTC One X!
- Sent from an IceCold Hammerhead!
vin4yak said:
Stock factory images aren't flashed in recovery.. That's why rootsu specifically said recovery
Personally, I've faced many issues with twrp in the past and ever since I've started using PhilzTouch (advanced version of cwm), I haven't looked back!
- Sent from an IceCold Hammerhead!
Click to expand...
Click to collapse
according to the official thread:
End Of Support
Quote:
Project Status: No Longer Updated
As I mentioned before, I have a lot of new important projects in my real life. I am very happy to abandon this project for real life alternatives.
CWM is a dead project for now, until some dev resurrects it. I was about to do, until these new projects came.
Current version will probably work a while for many devices. Some devices with new ROM installers could have issues. Just use TWRP or the CM Simple Recovery
If the current version works for you, there is no reason you don't use it though. No need to ***** in all threads because it doesn't work for you. Just move on to other alternatives.
Click to expand...
Click to collapse
but I see that it has been updated 2 days ago...
Philz is good and it works for now. I too had issues with TWRP on my S3, That's why I moved to Philz on that device and brought Philz to the N5.
We may see bug fixes with Philz if the device maintainers notice them. For example, the update 2 days ago was a bug I found and fixed. So if there is something broken, we may see fixes. New features - nope. So lets see what happens when L comes out with its default device encryption. I'm not jumping ship until I have to.
Ben36 said:
Flash the latest twrp first, then pick a rom
Latest twrp - https://www.dropbox.com/s/05vh73mstsovz9j/twrp2801.zip?dl=0
Flash in recovery then reboot recovery to check version at the top
Sent from my Android L Nexus 5 via Tapatalk
Click to expand...
Click to collapse
I did download from your link however when i flash it in twrp itself it says failed..any link for any latest twrp
Sent from my Nexus 5 using XDA Free mobile app
elnitrox said:
I did download from your link however when i flash it in twrp itself it says failed..any link for any latest twrp
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Here you go http://forum.xda-developers.com/showthread.php?p=50042079
Sent from my Nexus 5 using XDA Free mobile app
elnitrox said:
I did download from your link however when i flash it in twrp itself it says failed..any link for any latest twrp
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
well, most recoveries arent going to be in a flash in recovery form. if its in a zip, you might have to extract it and use fastboot to flash the actual twrprecovery.img or you can use the flashify app(if you have root).
simms22 said:
well, most recoveries arent going to be in a flash in recovery form. if its in a zip, you might have to extract it and use fastboot to flash the actual twrprecovery.img or you can use the flashify app(if you have root).
Click to expand...
Click to collapse
Done using flashify.
Flashing complete.
Is the latest version 6.2.3.4 ?
So just choose any rom and thats it right?
Sent from my Nexus 5 using XDA Free mobile app
elnitrox said:
Done using flashify.
Flashing complete.
Is the latest version 6.2.3.4 ?
So just choose any rom and thats it right?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
no, its 2.8 http://teamw.in/project/twrp2/205
anyways, im using an old one as well(2.6.something), and everything works fine.
rom and gapps. most roms will need the google apps to be flashed as well, since its illegal to include them in publically distributed custom roms.
the only reason why i havent flash a new rom again because the rom that im currently running is good doesnt really give problems like random reboots
the only thing is its an older version.
and its really tiring thing to start all over again.
anyways any good rom out there?
its close to stock rom with minor tweaks
im on purity rom btw 4.4.2
elnitrox said:
the only reason why i havent flash a new rom again because the rom that im currently running is good doesnt really give problems like random reboots
the only thing is its an older version.
and its really tiring thing to start all over again.
anyways any good rom out there?
its close to stock rom with minor tweaks
im on purity rom btw 4.4.2
Click to expand...
Click to collapse
rastakat. a very close to stock rom, with the right amount of tweaks(just whats needed), and no more. no issues for anybody on that rom. its in the original development section.
and last thing whats the latest gapps?
any links
thanx for the guidance simms22
elnitrox said:
and last thing whats the latest gapps?
any links
thanx for the guidance simms22
Click to expand...
Click to collapse
heres pa gapps http://forum.xda-developers.com/showthread.php?t=2397942
but you can use any, really. if you get a minimal gapps, you can install the other gapps through the play store
---------- Post added 14th October 2014 at 12:06 AM ---------- Previous post was 13th October 2014 at 11:52 PM ----------
oh, youll also need to flash the latest supersu(for root) http://download.chainfire.eu/supersu
So I got my 1+1 a few days ago and am okay with CM11s.I see blisspop is popular and people are getting good battery with it. But are there Abby downsides of upgrading to L? Should I wait for stable CM12s
Sent from my A0001 using XDA app
SilentRazor said:
So I got my 1+1 a few days ago and am okay with CM11s.I see blisspop is popular and people are getting good battery with it. But are there Abby downsides of upgrading to L? Should I wait for stable CM12s
Sent from my A0001 using XDA app
Click to expand...
Click to collapse
It's daily driver material. Just don't flash the most recent nightlies. They have some firmware update issues.
I have been using using Temaseks rom and its as smooth as possible, well worth upgrading to.
rudi_j7 said:
It's daily driver material. Just don't flash the most recent nightlies. They have some firmware update issues.
Click to expand...
Click to collapse
Not true, I have most recent CM12 nightly and it's ok.
giaur said:
Not true, I have most recent CM12 nightly and it's ok.
Click to expand...
Click to collapse
Maybe not true for you, bit still true for others.
Transmitted via Bacon
timmaaa said:
Maybe not true for you, bit still true for others.
Transmitted via Bacon
Click to expand...
Click to collapse
Nobody confirmed this problem on Oneplus. There are some problems on Find7/Unofficial CM12 builds (there is no official CM12 for Find7). It's safe to user latest CM12 nightly on bacon, dont be afraid
giaur said:
Nobody confirmed this problem on Oneplus. There are some problems on Find7/Unofficial CM12 builds (there is no official CM12 for Find7). It's safe to user latest CM12 nightly on bacon, dont be afraid
Click to expand...
Click to collapse
I'm not afraid. I'm simply saying that just because you are not experiencing a particular bug personally it does not mean the bug doesn't exist for the greater community.
Transmitted via Bacon
timmaaa said:
I'm not afraid. I'm simply saying that just because you are not experiencing a particular bug personally it does not mean the bug doesn't exist for the greater community.
Transmitted via Bacon
Click to expand...
Click to collapse
Not only me, many people flashed today CM12 build and nobody has any problems. I have no idea why do you think there is any bug on latest CM12 nightlies?
giaur said:
Nobody confirmed this problem on Oneplus. There are some problems on Find7/Unofficial CM12 builds (there is no official CM12 for Find7). It's safe to user latest CM12 nightly on bacon, dont be afraid
Click to expand...
Click to collapse
timmaaa said:
I'm not afraid. I'm simply saying that just because you are not experiencing a particular bug personally it does not mean the bug doesn't exist for the greater community.
Transmitted via Bacon
Click to expand...
Click to collapse
Well, usually a minor glitch or bug wouldn't be a big deal, but here, the consequence could be a hard brick as reported on the Find 7. There's no coming back from there, and official or unofficial doesn't matter because both are from the same sources.
rudi_j7 said:
Well, usually a minor glitch or bug wouldn't be a big deal, but here, the consequence could be a hard brick as reported on the Find 7. There's no coming back from there, and official or unofficial doesn't matter because both are from the same sources.
Click to expand...
Click to collapse
Find7 != Oneplus, latest nightly is tested by many people and it's ok on bacon. Besides - sources are the same but there can be something messed while compilation process that prevents rom to boot. Do you mean hard brick, so phone is completly bricked and can't even boot into recovery mode?
giaur said:
Find7 != Oneplus, latest nightly is tested by many people and it's ok on bacon. Besides - sources are the same but there can be something messed while compilation process that prevents rom to boot. Do you mean hard brick, so phone is completly bricked and can't even boot into recovery mode?
Click to expand...
Click to collapse
Yep. Hard brick as in an expensive paperweight. CM has merged a commit to stop CM nightlies for Find7 and Bacon temporarily because of this issue. They merged some firmware update which has botched everything up.
rudi_j7 said:
Yep. Hard brick as in an expensive paperweight. CM has merged a commit to stop CM nightlies for Find7 and Bacon temporarily
Click to expand...
Click to collapse
Which commit is it? CM nightlies are still available for bacon, I have installed today nightly. And I can't see any CM12 nightlies for Find7, there are only CM11
giaur said:
Which commit is it? CM nightlies are still available for bacon, I have installed today nightly. And I can't see any CM12 nightlies for Find7, there are only CM11
Click to expand...
Click to collapse
http://review.cyanogenmod.org/#/c/85323/
Sent from my A0001 using XDA Premium 4 mobile app
rudi_j7 said:
http://review.cyanogenmod.org/#/c/85323/
Sent from my A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's merged today morning, 14.01 nightly was compiled yesterday and it's still available: http://jenkins.cyanogenmod.com/job/android/98199/console download is here: http://download.cyanogenmod.org/get/jenkins/98199/cm-12-20150114-NIGHTLY-bacon.zip
It seems there will not be new nightly tommorow, the one already built is ok.
@timmaaa what do you use?
Sent from my A0001 using XDA Free mobile app
And I guess no CM12 nightlies, which Blisspop version should I hop on to?
Going from stock CM11s 05Q to CM 12 nightlies do i need to flash the firmware? and if yes which one?
Thanks.
kelto said:
Going from stock CM11s 05Q to CM 12 nightlies do i need to flash the firmware? and if yes which one?
Thanks.
Click to expand...
Click to collapse
If you have rooted your phone & installed recovery, First back up then flash any CM 12 nightlies . preferably latest & then gapps compatible with Lollipop.
drishd said:
If you have rooted your phone & installed recovery, First back up then flash any CM 12 nightlies . preferably latest & then gapps compatible with Lollipop.
Click to expand...
Click to collapse
First of all thanks for the answer, so i dont have to flash any firmware right?
kelto said:
First of all thanks for the answer, so i dont have to flash any firmware right?
Click to expand...
Click to collapse
The firmware is contained within the nightlies, so no.
timmaaa said:
The firmware is contained within the nightlies, so no.
Click to expand...
Click to collapse
Yes!
drishd said:
Yes!
Click to expand...
Click to collapse
Yes what?
Transmitted via Bacon
timmaaa said:
Yes what?
Transmitted via Bacon
Click to expand...
Click to collapse
Sorry! I was replying on other thread & got posted here by mistake.