First off, I have searched for this and did not find any appropriate thread. I have a OnePlus 64Gig phone that I have unlocked bootloader, rooted and am running Philz CWM recovery on. I have flashed many roms on this and many other phones and have never had this ongoing error. I can flash roms, gapps and SuperSU without issue in recovery. However, any other type file like a modem or kernel zip file shows the following error: E:footer is wrong, E:signature verification failed, E:Installation aborted.
I can Fastboot flash these files, but cannot get them to load in recovery. I have tried all combinations I can think of. A little more info, I have developer mode, unknown sources, etc. checked also.
Any help is appreciated.
The modem and kernel files are most likely not recovery flashable zips. What are the exact filenames? And where did you get them?
Transmitted via Bacon
timmaaa said:
The modem and kernel files are most likely not recovery flashable zips. What are the exact filenames? And where did you get them?
Transmitted via Bacon
Click to expand...
Click to collapse
Here are the files. I am pretty sure that the modem file is recovery flashable. The kernel is probably not recovery flashable. I have had the issue on some other files lately like some gapps files.
Thanks for the help.
OPO_L5_alpha-modem-flashable I got this from the BlissPop forum for the OPO. Others have flashed it with recovery, so not sure what is happening.
Boeffla-kernel-3.0-alpha12-CM-bacon-l474-2015-01-05-213002.CWM
wilbarger said:
Here are the files. I am pretty sure that the modem file is recovery flashable. The kernel is probably not recovery flashable. I have had the issue on some other files lately like some gapps files.
Thanks for the help.
OPO_L5_alpha-modem-flashable I got this from the BlissPop forum for the OPO. Others have flashed it with recovery, so not sure what is happening.
Boeffla-kernel-3.0-alpha12-CM-bacon-l474-2015-01-05-213002.CWM
Click to expand...
Click to collapse
They do look like flashable zips. It could be as simple as disabling signature verification in the Philz options, if that option exists. Either that or try using TWRP recovery instead.
Transmitted via Bacon
timmaaa said:
They do look like flashable zips. It could be as simple as disabling signature verification in the Philz options, if that option exists. Either that or try using TWRP recovery instead.
Transmitted via Bacon
Click to expand...
Click to collapse
Yep, I will try that on Philz or move to TWRP. Do you know if it is possible to copy backups from CWM directly over to TWRP?
Again, thanks for the help.
wilbarger said:
Yep, I will try that on Philz or move to TWRP. Do you know if it is possible to copy backups from CWM directly over to TWRP?
Again, thanks for the help.
Click to expand...
Click to collapse
I don't believe backups can be used cross-platform like that. But I could be wrong.
Transmitted via Bacon
I don't think they can be used cross recovery like that, and I'm pretty sure those flashable zips are in twrp format so that's why you get those errors in philz? The kernel will then also flash via twrp just fine.
Sent From Lollipopified Bacon Goodness!
ek69 said:
I don't think they can be used cross recovery like that, and I'm pretty sure those flashable zips are in twrp format so that's why you get those errors in philz? The kernel will then also flash via twrp just fine.
Sent From Lollipopified Bacon Goodness!
Click to expand...
Click to collapse
The zip format is the same across all recoveries, you can flash any flashable zip with any recovery, so that isn't what's wrong.
Transmitted via Bacon
timmaaa said:
I don't believe backups can be used cross-platform like that. But I could be wrong.
Transmitted via Bacon
Click to expand...
Click to collapse
TWRP fixed the issue. Now, time to see if I can figure out if/how to transfer the backups. Not the end of the world if I can't.
Related
I've erased everything but TWRP recovery and fast boot. I need to install an operating system. I can use fast boot or boot into recovery. How can I get an operating system back on the phone?
The closest I've found is cm-11.0-XNPH25R-bacon-signed-fastboot_64GB.zip but I can't fast boot it or any of its components. Says there are no partition tables.
Is there a way to copy a zip file to the system that I can install in recovery?
Use an adb push command to send a ROM zip to your internal storage, then flash it.
Transmitted via Bacon
timmaaa said:
Use an adb push command to send a ROM zip to your internal storage, then flash it.
Transmitted via Bacon
Click to expand...
Click to collapse
I sent a ROM zip to internal storage, but it failed when updating partitions.
Exactly what did you do to bork your partitions?
Transmitted via Bacon
timmaaa said:
Exactly what did you do to bork your partitions?
Transmitted via Bacon
Click to expand...
Click to collapse
Erased with TWRP-Dalvik Cache, System, Data, Internal Storage, and Cache.
That's it? That shouldn't bork your partition tables. Which ROM zip did you attempt to flash?
Transmitted via Bacon
timmaaa said:
That's it? That shouldn't bork your partition tables. Which ROM zip did you attempt to flash?
Transmitted via Bacon
Click to expand...
Click to collapse
I have tried three: Slim-bacon-4.4.4.build.6.8-WEEKLY-5783.zip, cm-11.0-XNPH25R-bacon-signed-fastboot_64GB.zip, and cm-11.0-XNPH25R-bacon-signed-fastboot.zip
I don't think the last two are flashable in recovery, they're fastboot images. You said you're unable to flash those via fastboot, right?
Transmitted via Bacon
timmaaa said:
I don't think the last two are flashable in recovery, they're fastboot images. You said you're unable to flash those via fastboot, right?
Transmitted via Bacon
Click to expand...
Click to collapse
Yes, I'll download and ADB another rom. TWRP does do some repairs.
Sebring5 said:
Yes, I'll download and ADB another rom. TWRP does do some repairs.
Click to expand...
Click to collapse
Flashed mahdi-2.7-bacon-20140807.zip after a few TWRP repairs & factory reset and it has booted. Back in business. Thanks for your help.
Awesome, great news.
Transmitted via Bacon
Is there a way to install cm11s without a pc? I have twrp 2.7
Sent from my Bacon!!
http://forum.xda-developers.com/showthread.php?t=2857110
Transmitted via Bacon
I suppose I dl the recovery flashable zip s of the complete rom?
Sent from my Bacon!!
Yeppers.
Transmitted via Bacon
I know you said without a pc, but for others who may stumble upon this post, you can also get the img files to load via fast boot flash from here: https://cyngn.com/products/oneplusone/
How do i update the oneplus one directly from 25R to 38R or 44S? Is this possible? By recovery like TWRP? I'm currently running 25R. When i check for updates....no new updates seem to come.
jassim007 said:
How do i update the oneplus one directly from 25R to 38R or 44S? Is this possible? By recovery like TWRP? I'm currently running 25R. When i check for updates....no new updates seem to come.
Click to expand...
Click to collapse
If you want to use OTA updates you must take them in sequence (25R>30O>33R>38R>44S). You can take somewhat of a shortcut though. Clean flash the full 38R ROM zip from here:
https://www.androidfilehost.com/?fid=95747613655046955
Then you can just apply the 44S update.
Transmitted via Bacon
What timmaaa said works. Another option is to flash, http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-4-4-4-xnph44s-t2932551
It is OTA safe as indicated in the OP post and will give you XNPH44S as well as root (SuperSU)
One question from me. If he takes the factory image from zephiK, does this mean he wipes his data also?
Or is this only when flashing via adb?
Send from OnePlus One using Tapatalk
Satras said:
One question from me. If he takes the factory image from zephiK, does this mean he wipes his data also?
Or is this only when flashing via adb?
Send from OnePlus One using Tapatalk
Click to expand...
Click to collapse
What zephik posted isn't a factory image, that's Calkulin's stock rooted 44S ROM. No, user data is not wiped when flashing that.
Transmitted via Bacon
timmaaa said:
If you want to use OTA updates you must take them in sequence (25R>30O>33R>38R>44S). You can take somewhat of a shortcut though. Clean flash the full 38R ROM zip from here:
https://www.androidfilehost.com/?fid=95747613655046955
Then you can just apply the 44S update.
Transmitted via Bacon
Click to expand...
Click to collapse
So..... I have to flash via Twrp?
jassim007 said:
So..... I have to flash via Twrp?
Click to expand...
Click to collapse
That is correct. The general idea is,
If you're coming from a ROM other than the ROM you're currently using: Wipe.
If you're coming from the same ROM but upgrading to a new version: No wipe, just flash the new zip. The only exception to this is if the OP says a wipe is required.
Thank you very much for your help.
please help..I am unrooted on 25rbut i have cwm on my device...But I cannot receive no update..for flashing 38r full rom zip ,must I root the phone first?Also can I flash it via cwm?I tried it via cwm ant it said flash aborted..thanks in advance
drharisis said:
please help..I am unrooted on 25rbut i have cwm on my device...But I cannot receive no update..for flashing 38r full rom zip ,must I root the phone first?Also can I flash it via cwm?I tried it via cwm ant it said flash aborted..thanks in advance
Click to expand...
Click to collapse
You don't need root to flash a ROM, try with TWRP instead.
Transmitted via Bacon
When trying to install twrp thtough twrp installer ...it cannot aas it is not rooted
drharisis said:
When trying to install twrp thtough twrp installer ...it cannot aas it is not rooted
Click to expand...
Click to collapse
Don't use the app, flash the recovery the normal way (with fastboot)
Transmitted via Bacon
Hi guys,
I need your helps. I was currently on TWRP 2.8.0.1, and I was able to access to recovery just fine with bbear's 5.0 rom. then I wanted to update to 2.8.1.0 using the TWRP manager (they said it was the safest) and didn't install busybox as they wanted me to. I proceed with the update and I believed the i got a prompt said that it failed. So I boot to recovery for a good 5 minutes but just stuck on logo. I can still reboot and go back to my rom. How do I fix this?
what if I boot into bootloader and re-push TWRP. should i pushed it with 2.8.0.1 or 2.8.1.0?
Thanks
Just flash TWRP 2.8.1.0 the normal way (fastboot), their app is notorious for screwing up. If you need instructions, check out my guide thread, the link is in my signature.
Transmitted via Bacon
timmaaa said:
Just flash TWRP 2.8.1.0 the normal way (fastboot), their app is notorious for screwing up. If you need instructions, check out my guide thread, the link is in my signature.
Transmitted via Bacon
Click to expand...
Click to collapse
thanks I will do that when I get home tonight. Believed it or not, i did used your guide to unlock boot loader, flash twrp, and rooted my phone . And TWRP said using their app is safer
Well, TWRP just want you to use their app. In my experience though, using apps like TWRP Manager, ROM Manager, etc to undertake such critical tasks is just asking for trouble. You should be fine once you've flashed it with fastboot.
Transmitted via Bacon
timmaaa said:
Well, TWRP just want you to use their app. In my experience though, using apps like TWRP Manager, ROM Manager, etc to undertake such critical tasks is just asking for trouble. You should be fine once you've flashed it with fastboot.
Transmitted via Bacon
Click to expand...
Click to collapse
I'm on 5.0 rom and I don't think I have this option "Update recovery with system updates" to uncheck. I just have to enable USB debugging and flash away correct?
lpiratel said:
I'm on 5.0 rom and I don't think I have this option "Update recovery with system updates" to uncheck. I just have to enable USB debugging and flash away correct?
Click to expand...
Click to collapse
Yep, disregard the 'update cm recovery' part.
Transmitted via Bacon
timmaaa said:
Yep, disregard the 'update cm recovery' part.
Transmitted via Bacon
Click to expand...
Click to collapse
Hell yea, got it fixed and now on 2.8.1.0 using (fastboot). Thanks a lot Timmaaa, now i got to go thanks you on another post.
lpiratel said:
Hell yea, got it fixed and now on 2.8.1.0 using (fastboot). Thanks a lot Timmaaa, now i got to go thanks you on another post.
Click to expand...
Click to collapse
Haha, you're welcome, no need to do that though, one thanks is more than enough.
Transmitted via Bacon
So yeah im unable to install the latest update for my OPO (XNPH05Q)
I got a custom recovery and Next Camera Mod. And i was kind of stupid to panic and wipe my phone (with my backups) and now i cant update or get rid of Next Camera Mod and or update.
This is my first time im trying stuff like this so i would very mutch apprechiate any help.
Thanks.
Download the stock images from the CM site, extract the zip, and flash only the system image with fastboot.
Transmitted via Bacon
timmaaa said:
Download the stock images from the CM site, extract the zip, and flash only the system image with fastboot.
Transmitted via Bacon
Click to expand...
Click to collapse
Thank you, will try!