Related
Hello,
I have since 2 month a TransformerTf300T, and yesterday i decided to unlock him and to root it
so i unlocked my tf300t with the asus tool and succeeded btw firmware v 9.4.3.30 i flashed cwm v5.8.3.4 en then i rooted my tf300t with rootDebufs from sparkym3 this also succeeded en then i wanted to try the custom Cyanogen mod nightlies (cm-9-20120717-Nightly-201.zip.
and then i see 201 and pressed yes O ohw but it installed the custom rom succesfully and i rebooted my device en and then i begans.
touchscreen not responding on any touch on the screen and when i connect te Tf300t to my pc it says that is a Tf201 ??? hmmm.
So i tried to install different custom roms but all say the same when i press yes
assert failed : getpropt("ro.product.device") == "tf300t" || getpropt("ro.build.product") ==tf300t
E:Error in /sdcard/cm-9-20120715.2227-SKANNY-tf300t.zip
(status 7)
installation aborted
this error i get with al the custom roms except the cm-9-201-20117-NIGHTLY-201 i'm only can install this custom rom
Ohw btw i made no backup from my stock rom, yes i know it is stupid but i thought by my self what can go wrong, and now i have a problem with it
so if anyone can help to restore my tf300t to function again, i am very pleased and my wife also it is her afteral so she is not so happy with it
i already say thanx to the people that reads this en decide to help me
greetings
Vipertjuh
Had the same error on twrp and Cwm touch recovery.
Installed the normal Cwm and flashing worked fine
Install this. Recovery
http://forum.xda-developers.com/showthread.php?t=1668173
mikaole said:
Had the same error on twrp and Cwm touch recovery.
Installed the normal Cwm and flashing worked fine
Install this. Recovery
http://forum.xda-developers.com/showthread.php?t=1668173
Click to expand...
Click to collapse
okay thnx i downloaded the image and what is fastboot and sdk and where can i get it
greetings
Which system is on your PC?
mikaole said:
Which system is on your PC?
Click to expand...
Click to collapse
Win 7 X64
Dl this
http://www.android-hilfe.de/attachm...tf300t-root-fastboot-treiber-adb-recovery.zip
Extract all to c:\trecovery\
Dl the recovery.img from the cwm thread and replace the one in the t recovery folder
Open cmd
Write
CD c:\trecovery\
Now you should be in the right folder
Connect your, pad, to the pc
Then write the 1st fastboot command from the cwm thread
When writing was a success
Write the 2nd command
As soon as the pad goes black hold volume -
And then vol+ to go to recovery
mikaole said:
Dl this
http://www.android-hilfe.de/attachm...tf300t-root-fastboot-treiber-adb-recovery.zip
Extract all to c:\trecovery\
Dl the recovery.img from the cwm thread and replace the one in the t recovery folder
Click to expand...
Click to collapse
ok thnx that is done and now how do i do the command can just start fastboot on the pc ???
Read post above
Changed it
mikaole said:
Read post above
Changed it
Click to expand...
Click to collapse
ok i did the steps, but by thefirst command i typed comes the message waiting for device
Okay windows didn't install drivers.
Thanks you have to follow the. Steps written here
http://wiki.cyanogenmod.com/wiki/Fastboot
Sry a bit to long to write here
Dn
Damn wait, I forgot to bring the pad. To fastboot
---------- Post added at 08:31 PM ---------- Previous post was at 08:27 PM ----------
Turn on your pad with vol- and power
When the text comes on screen let both loose and wait till 3 icons are on screen
With vol- choose the usb icon and then vol+ to enter
Then connect pad to pc
Sry have to go to work now. Hope you can do it now.
---------- Post added at 09:06 PM ---------- Previous post was at 08:31 PM ----------
On this thread is a video for installing drivers
http://forum.xda-developers.com/showthread.php?t=1697227
mikaole said:
Okay windows didn't install drivers.
Thanks you have to follow the. Steps written here
http://wiki.cyanogenmod.com/wiki/Fastboot
Sry a bit to long to write here
Dn
Damn wait, I forgot to bring the pad. To fastboot
---------- Post added at 08:31 PM ---------- Previous post was at 08:27 PM ----------
Turn on your pad with vol- and power
When the text comes on screen let both loose and wait till 3 icons are on screen
With vol- choose the usb icon and then vol+ to enter
Then connect pad to pc
Sry have to go to work now. Hope you can do it now.
---------- Post added at 09:06 PM ---------- Previous post was at 08:31 PM ----------
On this thread is a video for installing drivers
http://forum.xda-developers.com/showthread.php?t=1697227
Click to expand...
Click to collapse
Thnx I switched from laptop to pc. works better
thnx for your help i really appreciated your effort en time to help me, It Worked.
I Installed thhe Skanky custom rom en gapps en it works i am really a happy man with wife hahahah
Only one thing if i connect my tf300t to my pc/laptop it still recognize my tf300t as a tf201 is this also reverseble or not and gives this any trouble software ?
thnk you
:good::good:
Nice to hear that. Skang is one of the best.
Hi there!
I just had a go at flashing my new HTC One M8, and I'm stuck in recovery mode.
I followed these instructions:
androidcentral.us/2014/04/root-att-htc-one-m8/
But got the TWRP file from here because the original link was overloaded:
androidfiles.org/?developer=M8&folder=Recoveries
I essentially just ran:
Code:
fastboot-mac erase
cachefastboot-mac
flash boot recovery.img
fastboot-mac reboot
Then installed the SuperSU update zip. Now every time I try reboot into the Android system, it boots into recovery mode. If I boot into the bootloader, I get the option to boot using fastboot but that appears to fail (it returns me to the bootloader after a second). If I select hboot, it says "No image or wrong image!" after trying to load a .nbh file.
Any ideas?
BTW, I got the unlocked version from Amazon: amazon.com/HTC-One-M8-Unlocked-Warranty/dp/B00J3554KE/
marcog123 said:
hi there!
I just had a go at flashing my new htc one m8, and i'm stuck in recovery mode.
I followed these instructions:
Androidcentral.us/2014/04/root-att-htc-one-m8/
but got the twrp file from here because the original link was overloaded:
Androidfiles.org/?developer=m8&folder=recoveries
i essentially just ran:
Code:
fastboot-mac erase
cachefastboot-mac
flash boot recovery.img
fastboot-mac reboot
then installed the supersu update zip. Now every time i try reboot into the android system, it boots into recovery mode. If i boot into the bootloader, i get the option to boot using fastboot but that appears to fail (it returns me to the bootloader after a second). If i select hboot, it says "no image or wrong image!" after trying to load a .nbh file.
Any ideas?
Btw, i got the unlocked version from amazon: Amazon.com/htc-one-m8-unlocked-warranty/dp/b00j3554ke/
Click to expand...
Click to collapse
you flashed recovery to kernel partition! The guide is wrong as i read.
To flash recovery:
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
BUT you will also need to flash the kernel again as you just messed it up!
Ouch! Ok, that sucks that steps I was following were wrong. :/ But at least I feel less like an idiot.
So I found a boot.img from here: http://forum.xda-developers.com/showthread.php?p=51580259 and flashed that. Now I'm not returning to the recovery screen, but to the bootloader always and it gives the same message about wrong image.
Here are the commands I ran:
Code:
./fastboot-mac erase cache
./fastboot-mac flash boot boot.img
./fastboot-mac flash recovery Recovery.img
./fastboot-mac reboot
marcog123 said:
Ouch! Ok, that sucks that steps I was following were wrong. :/ But at least I feel less like an idiot.
So I found a boot.img from here: http://forum.xda-developers.com/showthread.php?p=51580259 and flashed that. Now I'm not returning to the recovery screen, but to the bootloader always and it gives the same message about wrong image.
Here are the commands I ran:
Code:
./fastboot-mac erase cache
./fastboot-mac flash boot boot.img
./fastboot-mac flash recovery Recovery.img
./fastboot-mac reboot
Click to expand...
Click to collapse
can you stil enter fastboot mode?
Is fastboot mode the one where you see "FASTBOOT USB" in red on top? Cause I can get into that and connect to my phone from my laptop.
marcog123 said:
Is fastboot mode the one where you see "FASTBOOT USB" in red on top? Cause I can get into that and connect to my phone from my laptop.
Click to expand...
Click to collapse
Thats good. I'll help you get back working phone.
BUT i need some info:
Please tell me what bootloader is about:
HBoot and so on. Also i need to know if its an "UNLOCKED" phone sold by a carrier. Or a carrier free phone. Because you will need fittig software for each model.
The info on top of the bootloader screen?
Code:
M8_UL_CA PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA03_2G
OpenDSP-v26.2.2-00538-M8974.0106
OS-1.12.1540.17
eMMC-boot 2048MB
Mar 3 2014,20:18:02.0
It's an unlocked (carrier free) phone sold by Amazon: amazon.com/HTC-One-M8-Unlocked-Warranty/dp/B00J3554KE/
Okay. Will get the right files.
Sent from my beloved HTC One S using (most time buggy) Tapatalk
The kernel you flashed is for "SPRINT" m8 and NOT COMPATIBLE to your device. Just don't flash any files as long as you don't know if theyre matching your phone please.
Did you flash the TWRP 2703 version?
Yes, 2.7.0.3.
Thanks so much for all your help so far! I hugely appreciate how quickly you're jumping on helping me.
marcog123 said:
Yes, 2.7.0.3.
Thanks so much for all your help so far! I hugely appreciate how quickly you're jumping on helping me.
Click to expand...
Click to collapse
can you enter TWRP?
by select "recovery" in bootloader
---------- Post added at 07:22 PM ---------- Previous post was at 07:17 PM ----------
marcog123 said:
Yes, 2.7.0.3.
Thanks so much for all your help so far! I hugely appreciate how quickly you're jumping on helping me.
Click to expand...
Click to collapse
can you enter TWRP?
by select "recovery" in bootloader
This kernel may work: http://androidfil.es/1mSt Don't flash it yet.
Yes, that gets me into TWRP!
marcog123 said:
Yes, that gets me into TWRP!
Click to expand...
Click to collapse
Just that you know, that is YOUR phone:
x.xx.1540.x - HTC One U.S. Developer Edition
I'm looking for a stock rom, if that is not possible you will have to use a custom rom
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
marcog123 said:
Yes, that gets me into TWRP!
Click to expand...
Click to collapse
Have you installed adb on your laptop? BTW are you using a apple mac?
Download this rom please --> LINK
The rom includes stock kerne. Just download it and we'll try to flash just the included kernel file as it should get your device back working.
Otherwise you'll have to flash full rom via twrp.
Please tell me when your download is ready. And this time do yourself a favor and DON'T act on your own as long as you don't know what you're doing...
Oh my, thanks so much that worked!! You're awesome! I honestly had a feeling I'd lost my phone.
Glad you got it back alive
Sent from my beloved HTC One S using (most time buggy) Tapatalk
LS.xD said:
Glad you got it back alive
Sent from my beloved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
tnx brother i also make same mistek i flash recover in kernel and now only in recover same information as i see above but in device its not show os...version......i try to download your file but its link expire......please help me.
my htc one is stuck in recovery mode
i have a htc one from verizon ( unlocked) it was upgrading but was taking too long so i disconnect the phone ( big mistake i know) since that i turn on my phone and i got this :
ANDROID SYSTEM RECOVERY <3e>
at botton shows the following:
E:missing bitmap oem_unlock_bg
(code-1)
write host mode success
handle _cota_install: No CW files. Skip cw installation
hope you can help me
wachoforeal said:
i have a htc one from verizon ( unlocked) it was upgrading but was taking too long so i disconnect the phone ( big mistake i know) since that i turn on my phone and i got this :
ANDROID SYSTEM RECOVERY <3e>
at botton shows the following:
E:missing bitmap oem_unlock_bg
(code-1)
write host mode success
handle _cota_install: No CW files. Skip cw installation
hope you can help me
Click to expand...
Click to collapse
HTC One M7 or M8 ?
ls.xd said:
htc one m7 or m8 ?
Click to expand...
Click to collapse
htc one m8
wachoforeal said:
htc one m8
Click to expand...
Click to collapse
Flash TWRP in fastboot mode.
Install STOCK ROM in TWRP.
Phone will be fine again
i am downloading the software but how do i install?
---------- Post added at 05:55 PM ---------- Previous post was at 05:36 PM ----------
wachoforeal said:
i am downloading the software but how do i install?
Click to expand...
Click to collapse
i have a problem , i have just downloaded the twrp , but whenever i try to open, its a disc image , that is correct?
---------- Post added at 06:10 PM ---------- Previous post was at 05:55 PM ----------
Phone will be fine again
i have a problem , i have just downloaded the twrp , but whenever i try to open, its a disc image , is that correct?
---------- Post added at 06:40 PM ---------- Previous post was at 06:10 PM ----------
fella something is wrong , the twrp is a image file its not a program .
Phone will be fine again
Hello,
Yesterday, I tried to flash my moto g to install cyanogenmod 11 with cwm recovery.
But after the installation, bootloop with the little blue head.
I want to flash it again but the phone is not recognized by my pc, and I installed the drivers...
So I can't install a new rom, and I have no backups.
HELP !
Burned-Z said:
Hello,
Yesterday, I tried to flash my moto g to install cyanogenmod 11 with cwm recovery.
But after the installation, bootloop with the little blue head.
I want to flash it again but the phone is not recognized by my pc, and I installed the drivers...
So I can't install a new rom, and I have no backups.
HELP !
Click to expand...
Click to collapse
Pres power for 2min should be turn off. Then try power and volume down to enter the fastboot. If you succeed, then download the proper stock rom for your device from http://sbf.droid-developers.org/phone.php?device=14 then follow this guide to recover the phone http://forum.xda-developers.com/showthread.php?t=2542219
If you cant enter fastboot then i really don't know. Then It should be done by side loading the rom, but have no experience with that. regards
bobrda said:
Pres power for 2min should be turn off. Then try power and volume down to enter the fastboot. If you succeed, then download the proper stock rom for your device from http://sbf.droid-developers.org/phone.php?device=14 then follow this guide to recover the phone http://forum.xda-developers.com/showthread.php?t=2542219
If you cant enter fastboot then i really don't know. Then It should be done by side loading the rom, but have no experience with that. regards
Click to expand...
Click to collapse
Already tried, in the cmd.exe it's written " < waiting for device > " when I type the commands...
It's not taken by the warranty ?
sideload method for phone http://forum.xda-developers.com/showpost.php?p=51601244
---------- Post added at 12:56 PM ---------- Previous post was at 12:53 PM ----------
Burned-Z said:
Already tried, in the cmd.exe it's written " < waiting for device > " when I type the commands...
It's not taken by the warranty ?
Click to expand...
Click to collapse
Don't know for warranty. Try to instal GPE rom or some other. it should be past. I have had a problem with German rom, but with GB rom i succeed. I have a 1032 version
bobrda said:
sideload method for phone http://forum.xda-developers.com/showpost.php?p=51601244
---------- Post added at 12:56 PM ---------- Previous post was at 12:53 PM ----------
Don't know for warranty. Try to instal GPE rom or some other. it should be past. I have had a problem with German rom, but with GB rom i succeed. I have a 1032 version
Click to expand...
Click to collapse
I can't install any rom, my device isn't recognized by my PC
Burned-Z said:
I can't install any rom, my device isn't recognized by my PC
Click to expand...
Click to collapse
really don't know that. try to reinstall Motorola drivers, or adb. Try another usb on computer..
bobrda said:
really don't know that. try to reinstall Motorola drivers, or adb. Try another usb on computer..
Click to expand...
Click to collapse
Only "Motorola MTP Device" is recognized, but I can't click it.
Here the screen shot. Where its saying XT 1032 it is a power up phone. Where it say adb interference it is in fasboot mode. regards
bobrda said:
really don't know that. try to reinstall Motorola drivers, or adb. Try another usb on computer..
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g/general/unbrick-method-t2794271
eg0097 said:
http://forum.xda-developers.com/moto-g/general/unbrick-method-t2794271
Click to expand...
Click to collapse
Thnks for this. I put it in the bookmarks if there would be a necessary :good:
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Talionator said:
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Click to expand...
Click to collapse
in CMD if you don't know you can use included Script
Alright, but where to find doggee bl7000 drivers I cant find them
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
Its stuck on waiting for device
Means no Driver Installed on Your PC
mark332 said:
Means no Driver Installed on Your PC
Click to expand...
Click to collapse
phone got bootloop on orange state on logo
Mine got too
Talionator said:
phone got bootloop on orange state on logo
Click to expand...
Click to collapse
What i'm supposed to do ??? Mine got bootlooped too !
Bootloop
You must follow that instruction i got a bootloop after that i fixed it
community.doogee.cc/forum.php?mod=viewthread&tid=228&extra=page%3D1
and please use that firmware only for Dodgee BL7000
mega.nz/#!4W40QayS!8R7cJ6H0TwNPJpVQWpRWepGWI2Z0DiKC9A7GSHPlTz4
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Christian1968.Bolz said:
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Click to expand...
Click to collapse
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
mark332 said:
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Click to expand...
Click to collapse
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
steathnic666 said:
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
Click to expand...
Click to collapse
Not work
You can use Magisk for initial root
or wait while someone compile
After i followed the Instructions with the BL7000 unlock/root/ twrp tool , the bootloader was unlocked but the phone soft-bricked....Imei gone of course....back to stock rom....well...i tried to flash Twrp with flashtool, "size too big"
then tried to flash a smaller version of Twrp (13Mb ver. 3.2.1.0) that lead into total blackness....back to regular recovery...voila.....i dont wanna try the Tool again .....bootloader is still unlocked
i am giving up for now....
cheers...
Is there ANY working root method for the BL12000 (NOT pro) ? I've been looking for months now without success
hi my phone is stuck in a boot loop the doogee logo shows up after a couple of seconds screen turns off and doogee logo shows up again
i try to boot into recovery mode but nothing happens phone just turns on and bootloops i plug into my pc and get the usb connected sound then the usb disconnected sound then phone just bootloops can you help
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Solved
dermpuma said:
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Click to expand...
Click to collapse
Solved with
FASTBOOT ROM
https://en.miui.com/a-234.html
AND
xiaomiflash 2017.4.25.0
REBOOT ERROR ROM BUT YOU UNLOCK BOOTLOADER AND ENJOY
SORRY MY BAD ENGLISH
THANKS
U used a flashboot ROM via Mi Flash to fix this right? Whole applying the clean all.bat setting?
I had the same prob and this fixed it. But doing so reset my recovery :/
dermpuma said:
Hello I was trying to install a rom from xiaomi.eu on my device, I did not make a backup and I delete all the content, now it does not pass the fastboot mode, but I can not flash a rom with miflash because it appears to me that the rom does not have all .dat files, please help me:crying:
Click to expand...
Click to collapse
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
bootloader is locked error occuer
mathan7 said:
bootloader is locked error occuer
Click to expand...
Click to collapse
What happened?
For some unknown reasons, I brick my phone too after flashing magisk on stock ROM 10.3.7. At first I'm getting bootloop. Then decided to just drop magisk and reflash stock ROM again. Then I encountered an error. Hopefully this method will work.
Naveenthemi said:
What happened?
Click to expand...
Click to collapse
problem solved. goto fastboot mode again unlock via miunlock
mathan7 said:
problem solved. goto fastboot mode again unlock via miunlock
Click to expand...
Click to collapse
Ah yes
format data once via twrp
diamantik said:
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
Click to expand...
Click to collapse
Hi, the bat file won't open! the one you mentioned, can you help me link me to a noob friendly forum? I'm uncertain exactly what step i am missing.
Thanks!!
DONE!!! i managed to do it so thanks really
I have same prblm and now my device not showing in fastboot mode i mean i go in fastboot mode and connect device to my lappi then my device not showing when I command fastboot devices please help urgent
---------- Post added at 07:34 PM ---------- Previous post was at 06:42 PM ----------
harryagg said:
Hi, the bat file won't open! the one you mentioned, can you help me link me to a noob friendly forum? I'm uncertain exactly what step i am missing.
Thanks!!
DONE!!! i managed to do it so thanks really
Click to expand...
Click to collapse
please bro help I m trouble in same situation How ugh solve this
yuvi15 said:
I have same prblm and now my device not showing in fastboot mode i mean i go in fastboot mode and connect device to my lappi then my device not showing when I command fastboot devices please help urgent
---------- Post added at 07:34 PM ---------- Previous post was at 06:42 PM ----------
please bro help I m trouble in same situation How ugh solve this
Click to expand...
Click to collapse
Install adb and fastboot drivers if still not detected check your usb cable.
You need internet on your laptop.
Hello. I have a redmi note 7 pro that died after updating to version 10.3.13 global version. it seems that this version came with antirollback. the phone came with the bootloader unlocked and I had installed twrp and root on it, and I didn't manage to associate it with my account. after updating, I tried to install an older version because I could not install twrp but unfortunately I left the check all and lock checked. so I opted for a dead phone with a locked bootloader and that didn't let me install an older version than 10.3.13. unfortunately the phone I think is the Chinese version and had an unofficial version installed by my global seller. after installing version 10.3.13 it tells me that this version of miui cannot be installed on this device. can anyone help me revive him?
My phone got bricked redme note 7 pro ,I tried with flash tool echo mismatch it's getting error what is the problem which rom i need
Anyone can tell how much service center charges to unbrick via edl mode?
diamantik said:
Hello , don't worry !
First download this : https://bigota.d.miui.com/V10.2.10....FHINXM_20190424.0000.00_9.0_in_56ff3e7dd2.tgz
After that extract it , and connect your phone to PC ( make sure you have all the drivers needed ) in fastboot mode ( for this turn off your device , and hold power with volume down ) , and use " flash_all_except_data_storage.bat " , this will repair your corrupt system ! WITHOUT LOSSING DATA
After all of this , you will be able to boot your device !
Flash this TWRP : https://forum.xda-developers.com/re...ficial-3-2-3-redmi-note-6-pro-violet-t3912400 or use another (but from my experince , anothers twrp will not work ), aftersuccesfully booted in recovery , you can do whatever you like
Give a like , if I helped you
Click to expand...
Click to collapse
Great it worked