Database Info

[Q] Disabling fastboot in situation that the phone don't turn on

Hi every body.I installed virtuous unity on my desire s.Yesterday I changed radio of my phone and it's os crashed.I think it's fastboot is enabled, because I can't access to bootloader by keeping volume down and press power button. Thus I can't restore my backup.Can anybody help me??Thanks alot.

ebishirani said:
Hi every body.I installed virtuous unity on my desire s.Yesterday I changed radio of my phone and it's os crashed.I think it's fastboot is enabled, because I can't access to bootloader by keeping volume down and press power button. Thus I can't restore my backup.Can anybody help me??Thanks alot.
Click to expand...
Click to collapse
Did it crash during the radio flash?
Have you tried removing the battery, putting it back in the trying to get into bootloader?
Sent from my HTC Desire S using Tapatalk

ebishirani said:
Hi every body.I installed virtuous unity on my desire s.Yesterday I changed radio of my phone and it's os crashed.I think it's fastboot is enabled, because I can't access to bootloader by keeping volume down and press power button. Thus I can't restore my backup.Can anybody help me??Thanks alot.
Click to expand...
Click to collapse
1) What message have you got after updating radio? success or not.
2) have you checked the md5 of radio file before update
->anyway connect ur phone to the computer
-> make sure u have installed all htc drivers and ADB components
-> type adb reboot recovery
if you can go into recovery, now you can flash any ROM

Thanks guys.After updating the radio I got "successful ..." massage.Then I reboot my phone.After rebooting, HTC logo appears and stayed in this page. I waited a few minutes but nothing happened. Then I tried to go to the bootloader to restore my backup,but I couldn't access to the bootloader.(
I removed the battery but it didn't work.
---------- Post added at 03:03 PM ---------- Previous post was at 03:03 PM ----------
Thanks guys.After updating the radio I got "successful ..." massage.Then I reboot my phone.After rebooting, HTC logo appears and stayed in this page. I waited a few minutes but nothing happened. Then I tried to go to the bootloader to restore my backup,but I couldn't access to the bootloader.(
I removed the battery but it didn't work.

ebishirani said:
Thanks guys.After updating the radio I got "successful ..." massage.Then I reboot my phone.After rebooting, HTC logo appears and stayed in this page. I waited a few minutes but nothing happened. Then I tried to go to the bootloader to restore my backup,but I couldn't access to the bootloader.(
I removed the battery but it didn't work.
---------- Post added at 03:03 PM ---------- Previous post was at 03:03 PM ----------
Thanks guys.After updating the radio I got "successful ..." massage.Then I reboot my phone.After rebooting, HTC logo appears and stayed in this page. I waited a few minutes but nothing happened. Then I tried to go to the bootloader to restore my backup,but I couldn't access to the bootloader.(
I removed the battery but it didn't work.
Click to expand...
Click to collapse
Can you turn the phone at all, even if it gets stuck at the splash screen?
Do you have adb setup?
If you do turn the phone on and type "adb reboot recovery" you may have to type it a few times before it will reboot.
Sent from my HTC Desire S using Tapatalk

sagarda7 said:
1) What message have you got after updating radio? success or not.
2) have you checked the md5 of radio file before update
->anyway connect ur phone to the computer
-> make sure u have installed all htc drivers and ADB components
-> type adb reboot recovery
if you can go into recovery, now you can flash any ROM[/QUOT
Unfortunately I haven't checked the md5 of radio file
I installed HTC drivers and connected my phone to PC but computer couldn't detect my phone.(
Click to expand...
Click to collapse

Did you try adb?
Sent from my HTC Desire S using Tapatalk

cjward23 said:
Can you turn the phone at all, even if it gets stuck at the splash screen?
Do you have adb setup?
If you do turn the phone on and type "adb reboot recovery" you may have to type it a few times before it will reboot.
When I turn on my phone, the splash screen appears and the phone stick in this state and no button dose work.I can't do any thing.
Click to expand...
Click to collapse

ebishirani said:
cjward23 said:
Can you turn the phone at all, even if it gets stuck at the splash screen?
Do you have adb setup?
If you do turn the phone on and type "adb reboot recovery" you may have to type it a few times before it will reboot.
When I turn on my phone, the splash screen appears and the phone stick in this state and no button dose work.I can't do any thing.
Click to expand...
Click to collapse
ADB?
Sent from my HTC Desire S using Tapatalk
Click to expand...
Click to collapse

Look in my signature for various links...
Download and extract the adb & fastboot into a directory on your PC. Ensure that you have HTC drivers installed on you PC if not also download and install the link in my signature.
Then fire up a CMD on your PC, go to directory where adb is and issue the command
Code:
[B][COLOR="Blue"]adb reboot recovery[/COLOR][/B]
which should take you into recovery, where you'll be able to reflash or restore a nandroid backup from.

ben_pyett said:
Look in my signature for various links...
Download and extract the adb & fastboot into a directory on your PC. Ensure that you have HTC drivers installed on you PC if not also download and install the link in my signature.
Then fire up a CMD on your PC, go to directory where adb is and issue the command
Code:
[B][COLOR="Blue"]adb reboot recovery[/COLOR][/B]
which should take you into recovery, where you'll be able to reflash or restore a nandroid backup from.
Click to expand...
Click to collapse
Wonder why he can't get in to the bootloader though?
Sent from my HTC Desire S using Tapatalk

cjward23 said:
Wonder why he can't get in to the bootloader though?
Click to expand...
Click to collapse
Odd, although he has yet to comment on the success or failure of ADB? I suspect that he may not fully understand or be following our suggestions?
Could be that volume buttons broken, this happened to someone the other day - although in that case they were stuck in!
He has other options open to him
Code:
adb reboot [COLOR="Green"] --- then hold down volume buttons[/COLOR]
adb reboot bootloader

ben_pyett said:
Look in my signature for various links...
Download and extract the adb & fastboot into a directory on your PC. Ensure that you have HTC drivers installed on you PC if not also download and install the link in my signature.
Then fire up a CMD on your PC, go to directory where adb is and issue the command
Code:
[B][COLOR="Blue"]adb reboot recovery[/COLOR][/B]
which should take you into recovery, where you'll be able to reflash or restore a nandroid backup from.
Click to expand...
Click to collapse
Thanks a lot Ben.The speed of my internet is so slow (.I will download mentioned files and do your instructions.If it don't work,I will come back and announce it.
best regards.

ben_pyett said:
Odd, although he has yet to comment on the success or failure of ADB? I suspect that he may not fully understand or be following our suggestions?
Could be that volume buttons broken, this happened to someone the other day - although in that case they were stuck in!
He has other options open to him
Code:
adb reboot [COLOR="Green"] --- then hold down volume buttons[/COLOR]
adb reboot bootloader
Click to expand...
Click to collapse
Hi guys.I installed htc drivers(by this package: HTCDriver3.0.0.007) and adb folder which contains the files listed in the attached picture.When I typed "abd reboot recovery",in cmd I give this error massage: "device not found". please help me.(

ebishirani said:
Hi guys.I installed htc drivers(by this package: HTCDriver3.0.0.007) and adb folder which contains the files listed in the attached picture.When I typed "abd reboot recovery",in cmd I give this error massage: "device not found". please help me.(
Click to expand...
Click to collapse
And you tried this with the device turned on?
Sent from my HTC Desire S using Tapatalk

cjward23 said:
And you tried this with the device turned on?
Sent from my HTC Desire S using Tapatalk
Click to expand...
Click to collapse
Yes,When it was turn on even When it was turn off.But in both situation,There wasn't any successful.

ebishirani said:
Yes,When it was turn on even When it was turn off.But in both situation,There wasn't any successful.
Click to expand...
Click to collapse
And you tried the cmd a few times? Even though it looks like it is frozen on the splash screen there is stuff going on in the background. and adb will only start working after a certain point
Sent from my HTC Desire S using Tapatalk

cjward23 said:
And you tried the cmd a few times? Even though it looks like it is frozen on the splash screen there is stuff going on in the background. and adb will only start working after a certain point
Sent from my HTC Desire S using Tapatalk
Click to expand...
Click to collapse
I try it a few times,but there isn't any successful.The only message i give is:"device not found"
---------- Post added at 04:56 PM ---------- Previous post was at 04:26 PM ----------
The radio file that I flashed it to my phone is : Radio_12.59.60.26U_26.11.04.21_M.
The package of this file did not have "android-info.txt" file.To solve this problem I copied this file(android-info) from another radio file to the "Radio_12.59.60.26U_26.11.04.21_M" package.By did this I could install the radio on my phone.But after rebooting the device, it haven't worked.Can anybody help me to solve this problem?
thanks a lot.
---------- Post added at 05:44 PM ---------- Previous post was at 04:56 PM ----------
Nobody can help me??(

O!
ebishirani said:
I try it a few times,but there isn't any successful.The only message i give is:"device not found"
---------- Post added at 04:56 PM ---------- Previous post was at 04:26 PM ----------
The radio file that I flashed it to my phone is : Radio_12.59.60.26U_26.11.04.21_M.
The package of this file did not have "android-info.txt" file.To solve this problem I copied this file(android-info) from another radio file to the "Radio_12.59.60.26U_26.11.04.21_M" package.By did this I could install the radio on my phone.But after rebooting the device, it haven't worked.Can anybody help me to solve this problem?
thanks a lot.
---------- Post added at 05:44 PM ---------- Previous post was at 04:56 PM ----------
Nobody can help me??(
Click to expand...
Click to collapse
Where did you get this RADIO from? please provide a link to the source so that I can see.
Flashing a phones radio is one of the most potentially damaging things that you can do to your device and hacking a radio file prior to flashing is highly risky.

ben_pyett said:
Where did you get this RADIO from? please provide a link to the source so that I can see.
Flashing a phones radio is one of the most potentially damaging things that you can do to your device and hacking a radio file prior to flashing is highly risky.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=996630, This is a link to this radio file.
---------- Post added at 06:33 PM ---------- Previous post was at 06:27 PM ----------
ebishirani said:
http://forum.xda-developers.com/showthread.php?t=996630, This is a link to this radio file.
Click to expand...
Click to collapse
and it is another link : http://www.mediafire.com/?e5u78r5s3hk3kpy
---------- Post added at 06:37 PM ---------- Previous post was at 06:33 PM ----------
Oh my god!!!!!I didn't attention to the forum title,,,This radio file,is desire Hd's radio file.
---------- Post added at 06:55 PM ---------- Previous post was at 06:37 PM ----------
is it possible that the bootloader of the phone has damaged?If it is true,How can I modify the bootloader?Is it possible?

[ROOT][CWM] Huawei Ascend Y201 Pro U8666

This is just a copy of the guide on myhuawei.net.
I did this because I had some trouble finding the guide since I always look for stuff like this here on XDA.
I also decided to do this because the guide was not in English and the translations by google were not so good.
Huawei Ascend Y201 Pro U8666​
Root + CWM Recovery​
I am not responsible for any damage you may do to your phone by following this guide.
The files you will need, download them and extract them to a folder on your desktop:
RootY201Pro.zip
UnlockBootloader.zip
Recovery.zip
(PS: Links removed, check post attachments)
- Now, get your phone and go to Settings > Developer Tools. Make sure USB debugging is enabled.
- Also disable Fastboot in Settings.
- Connect your phone to your computer via USB and let it install the drivers. Make sure they are installed correctly. Do not select "Turn on USB storage" on your phone.
Root + Unlock Bootloader:
1. Go to the folder on your desktop where you extracted the files.
2. Right click on unlockbootloader.exe and select 'Run as administrator'.
3. Click "ROOT Your Phone", the program will work and then close on it's own.
4. In your phone, go to the apps drawer and there should be a new app called Superuser.
5. Now go to your PC, open the same program, but this time click "Unlock BOOTLOADER".
6. Let it finish, the program will close on it's own, and then power off your phone.
7. Unplug the phone from the PC and we are done.
You have now successfully rooted and unlocked the bootloader of your device!
Installing CWM Recovery:
1. Turn off your phone if it isn't already.
2. Press and hold the following buttons simultaneously for ~10 seconds: volume down + home button + power button
3. Release the buttons and your phone should not boot, it should be 'stuck'. That's what we wanted.
4. Connect your phone to the PC via USB. It should install the drivers fine.
5. Open CMD and browse to the folder in your desktop.
6. Once you are in the folder type the following commands:
6.a) fastboot erase recovery, then press Enter. Let it work...
6.b) fastboot flash recovery recovery.img, press Enter and let it work again.
6.c) fastboot reboot, and press Enter...
7. Your device is now rebooting. You can unplug it from the PC.
You have now installed CWM Recovery.
Instructions on how to boot to CWM Recovery:
1. Turn off your phone.
2. Press at the same time for ~5 seconds: volume up + power button
3. You should be now on CWM Recovery.
Don't forget to say thanks or to donate!

Good phone and good post. Thanks.

Not work for me.

canetinhas said:
Not work for me.
Click to expand...
Click to collapse
it works. you must be doing something wrong. Tell me where you're having problems.

Yes it works. Be sure to have android drivers installed. Sorry about this newbie question, what is CWM Recovery? Can you point me to a link I can read about it? Thanks.
---------- Post added at 10:30 PM ---------- Previous post was at 10:24 PM ----------
Forget it, I used the search button..

do this the unlocked sim card?

drakkeman said:
do this the unlocked sim card?
Click to expand...
Click to collapse
no it does not

It is possible to have a stock rom and flash it? Thanks.

outlawz_pt said:
It is possible to have a stock rom and flash it? Thanks.
Click to expand...
Click to collapse
yes

Can U point me direction please? Thanks.

outlawz_pt said:
Can U point me direction please? Thanks.
Click to expand...
Click to collapse
what? sorry didn't understand what you said

Sorry, can you give me some information to search for a stock rom and flash instructions? Thanks.

outlawz_pt said:
Sorry, can you give me some information to search for a stock rom and flash instructions? Thanks.
Click to expand...
Click to collapse
?? I don't think you are familiar with these terms. what do you want? you want to root your phone or install cwm?

You're right, i´m not familiar with android flashing, only with WM. I though it was similar. I rooted phone following your instructions. Tried to install cwm but process stucked..

outlawz_pt said:
You're right, i´m not familiar with android flashing, only with WM. I though it was similar. I rooted phone following your instructions. Tried to install cwm but process stucked..
Click to expand...
Click to collapse
please check if you have really rooted your phone, check if there is superuser app among your apps

Yes I have.

outlawz_pt said:
Yes I have.
Click to expand...
Click to collapse
have you disabled fast boot? make sure you follow every step

I disabled fast boot. I will try again and post feedback.
---------- Post added at 11:31 PM ---------- Previous post was at 11:09 PM ----------
Success. Thanks again for your instructions. I'm backing up my system right now. If i make a factory reset should i get a huawei clean device or with operator stuff?

outlawz_pt said:
I disabled fast boot. I will try again and post feedback.
---------- Post added at 11:31 PM ---------- Previous post was at 11:09 PM ----------
Success. Thanks again for your instructions. I'm backing up my system right now. If i make a factory reset should i get a huawei clean device or with operator stuff?
Click to expand...
Click to collapse
glad you made it! Regarding your question, I don't know.. please share your results when you finish making the factory reset I would like to know as well.

It will keep operator data. Fortunately I removed SD card. Factory reset will format card..

[Q] (Q) Urgent: My Xoom stuck at booting screen

Hello everyone,
I just received an MZ604 Xoom from my friend, current OS is 4.0.3, and I want to upgrade it to 4.1. However, when I tried to root my device by Tiamat Kernel 1.3.1, after typing in cmd "fastboot flash boot boot.img", it's ok. Then I entered "fastboot reboot", the tablet just frozen at boot screen. Here is what I have tried so far and got no result:
- Try to restart it by holding power off and volume up
- Try to turn of completely by holding power off button (it didn't turn off)
- Factory reset from recovery mode
Can you guys help me on this, I'm a newbie to this stuff. Thank you very much!!!!!!!
In addition, my tablet was brought at Singapore, no there is no official upgrade to 4.1 ...

Can you get into fastboot mode? Volume down and power with your xoom off. If you can we can fastboot your xoom back to stock and start over from scratch. Is it a us version?

dfib1 said:
Can you get into fastboot mode? Volume down and power with your xoom off. If you can we can fastboot your xoom back to stock and start over from scratch.
Click to expand...
Click to collapse
I cannot even turn off my tablet, but I can enter fastboot mode by pressing Power + volumn up, then wait 2 sec and press volumn down to select. But I already factory reset it in recovery mode, problem still persists :crying:

ADICpanasonic said:
I cannot even turn off my tablet, but I can enter fastboot mode by pressing Power + volumn up, then wait 2 sec and press volumn down to select. But I already factory reset it in recovery mode, problem still persists :crying:
Click to expand...
Click to collapse
follow the steps here to install adb on your pc ADB one click it is a one click method
create and folder on your pc c:\xoom
download this file xoom wifi restore and unzip it into the folder you created.
click on the xoom_restore.bat
follow the on screen instructions.
try and reboot your xoom
let me know how you made out
---------- Post added at 11:50 PM ---------- Previous post was at 11:48 PM ----------
Your xoom will be back to stock out of the box. I know it sucks to start over but you should be running.

dfib1 said:
follow the steps here to install adb on your pc it is a one click method
create and folder on your pc c:\xoom
download this fileand unzip it into the folder you created.
click on the xoom_restore.bat
follow the on screen instructions.
try and reboot your xoom
let me know how you made out
---------- Post added at 11:50 PM ---------- Previous post was at 11:48 PM ----------
Your xoom will be back to stock out of the box. I know it sucks to start over but you should be running.
Click to expand...
Click to collapse
I enter "adb devices" in cmd and it gave me 16 digit number, so I guess I don't have to install adb again?
And by the way, follow your instruction mean my tablet will go back to android 3.0?

dfib1 said:
follow the steps here to install adb on your pc ] it is a one click method
create and folder on your pc c:\xoom
download this file and unzip it into the folder you created.
click on the xoom_restore.bat
follow the on screen instructions.
try and reboot your xoom
let me know how you made out
---------- Post added at 11:50 PM ---------- Previous post was at 11:48 PM ----------
Your xoom will be back to stock out of the box. I know it sucks to start over but you should be running.
Click to expand...
Click to collapse
Thank you very much!! It works!!!!

[Q] Non-stop bootloop...

Hello,
Yesterday, I tried to flash my moto g to install cyanogenmod 11 with cwm recovery.
But after the installation, bootloop with the little blue head.
I want to flash it again but the phone is not recognized by my pc, and I installed the drivers...
So I can't install a new rom, and I have no backups.
HELP !

Burned-Z said:
Hello,
Yesterday, I tried to flash my moto g to install cyanogenmod 11 with cwm recovery.
But after the installation, bootloop with the little blue head.
I want to flash it again but the phone is not recognized by my pc, and I installed the drivers...
So I can't install a new rom, and I have no backups.
HELP !
Click to expand...
Click to collapse
Pres power for 2min should be turn off. Then try power and volume down to enter the fastboot. If you succeed, then download the proper stock rom for your device from http://sbf.droid-developers.org/phone.php?device=14 then follow this guide to recover the phone http://forum.xda-developers.com/showthread.php?t=2542219
If you cant enter fastboot then i really don't know. Then It should be done by side loading the rom, but have no experience with that. regards

bobrda said:
Pres power for 2min should be turn off. Then try power and volume down to enter the fastboot. If you succeed, then download the proper stock rom for your device from http://sbf.droid-developers.org/phone.php?device=14 then follow this guide to recover the phone http://forum.xda-developers.com/showthread.php?t=2542219
If you cant enter fastboot then i really don't know. Then It should be done by side loading the rom, but have no experience with that. regards
Click to expand...
Click to collapse
Already tried, in the cmd.exe it's written " < waiting for device > " when I type the commands...
It's not taken by the warranty ?

sideload method for phone http://forum.xda-developers.com/showpost.php?p=51601244
---------- Post added at 12:56 PM ---------- Previous post was at 12:53 PM ----------
Burned-Z said:
Already tried, in the cmd.exe it's written " < waiting for device > " when I type the commands...
It's not taken by the warranty ?
Click to expand...
Click to collapse
Don't know for warranty. Try to instal GPE rom or some other. it should be past. I have had a problem with German rom, but with GB rom i succeed. I have a 1032 version

bobrda said:
sideload method for phone http://forum.xda-developers.com/showpost.php?p=51601244
---------- Post added at 12:56 PM ---------- Previous post was at 12:53 PM ----------
Don't know for warranty. Try to instal GPE rom or some other. it should be past. I have had a problem with German rom, but with GB rom i succeed. I have a 1032 version
Click to expand...
Click to collapse
I can't install any rom, my device isn't recognized by my PC

Burned-Z said:
I can't install any rom, my device isn't recognized by my PC
Click to expand...
Click to collapse
really don't know that. try to reinstall Motorola drivers, or adb. Try another usb on computer..

bobrda said:
really don't know that. try to reinstall Motorola drivers, or adb. Try another usb on computer..
Click to expand...
Click to collapse
Only "Motorola MTP Device" is recognized, but I can't click it.

Here the screen shot. Where its saying XT 1032 it is a power up phone. Where it say adb interference it is in fasboot mode. regards

bobrda said:
really don't know that. try to reinstall Motorola drivers, or adb. Try another usb on computer..
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g/general/unbrick-method-t2794271

eg0097 said:
http://forum.xda-developers.com/moto-g/general/unbrick-method-t2794271
Click to expand...
Click to collapse
Thnks for this. I put it in the bookmarks if there would be a necessary :good:

How Root My XZP with Pie

I lose the Root after update to Pie
then i can't find my device by using the "adb devices"
How to Root for Magisk ?

@shoey63 , please guide, have you rooted your XZP ? (on PIE)

YasuHamed said:
@shoey63 , please guide, have you rooted your XZP ? (on PIE)
Click to expand...
Click to collapse
Just flash Magisk 17.3 in TWRP. No DRM fix needed for camera on Pie either. Rooted on Pie right now with my source built dttw kernel [emoji41]

After update: Does you have enabled the Developer menu, activate the adb debugging?
During try a connection via PC to the mobile, you must confirm on the cell phone , that you trust your PC

shoey63 said:
Just flash Magisk 17.3 in TWRP. No DRM fix needed for camera on Pie either. Rooted on Pie right now with my source built dttw kernel [emoji41]
Click to expand...
Click to collapse
its there any guide i have pie 47.2.a.6.30 i really need how to intall twrp en xzp dual

please help y cant use fastboot i tried use adb but when i type fastboot devices, nothing happen.
please help me with the twrp

evermyself said:
its there any guide i have pie 47.2.a.6.30 i really need how to intall twrp en xzp dual
Click to expand...
Click to collapse
Plenty of guides out there, no need for a new one.
Making sure device is authorised and correct drivers are installed would be a good start.

i download and debugmode its activated when i try adb devices work fine but fastboot no what i doing wrong, i already tried in another pc bith have windows 10 pro
i dont know what else can try

evermyself said:
i download and debugmode its activated when i try adb devices work fine but fastboot no what i doing wrong, i already tried in another pc bith have windows 10 pro
i dont know what else can try
Click to expand...
Click to collapse
Try zadig https://zadig.akeo.ie/
So you can do this :
Download the tool, start it.
Select the "S1Boot fastboot" device
Select the WinUSB Driver
Click Install
And then*fastboot devices*list your device

there is not any S1Boot fastboot i check there only in list all devices, then android (libusbk, lisbusb-win32, usb serial , Winusb)
what im doing wrong?
im already conected my xperia xzp fastboot mode (green light) , and device manager only say sony sa0116 adb interface but still with the yellow triangle

Fastboot is blue light. Volume up + insert usb

shoey63 said:
Fastboot is blue light. Volume up + insert usb
Click to expand...
Click to collapse
and traied to but not listed with fastboot devices...

finally its listed but now i dont know what to do , maybe download twrp and flash white the following
line : fastboot flash recovery (name.img), then flash boot.img? srry but ims so close please help
---------- Post added at 04:28 AM ---------- Previous post was at 04:21 AM ----------
ok i already flashed whit the following line fastboot flash recovery twrp.img and fastboot reboot (everything goes fine) the phone reboot fine,
but thenhow can i enter the recovery mode ?
---------- Post added at 04:33 AM ---------- Previous post was at 04:28 AM ----------
evermyself said:
finally its listed but now i dont know what to do , maybe download twrp and flash white the following
line : fastboot flash recovery (name.img), then flash boot.img? srry but ims so close please help
---------- Post added at 04:28 AM ---------- Previous post was at 04:21 AM ----------
ok i already flashed whit the following line fastboot flash recovery twrp.img and fastboot reboot (everything goes fine) the phone reboot fine,
but thenhow can i enter the recovery mode ?
Click to expand...
Click to collapse
ok i figuret google dont hurt thanks now im goin to install magisk
thanks for all your help srry again for my bad english im from argentina
oh by the way my error was port com3 has a android driver installed , i unistalled and used fastool drivers utility then everything goes well.
---------- Post added at 04:45 AM ---------- Previous post was at 04:33 AM ----------
here me again its there any mode to quit the lock img from the boot ?

When you unlock, the warning with a lock symbol is permanent.

looks like thts all now im searching a way for use titanium back up, but looks i cant and pokemon go never come back for my phone... sad day no way to downgrade google play services, no way to quite a lock symbol pie really sucks

Magisk Settings - repackage Magisk manager with a random name.
Magisk hide - select Pokemon Go.
But why aren't you googling all this?
XDA isn't a place to come to be spoon-fed.
Edit: Not that I care but you have not thanked a single helpful post.

shoey63 said:
Magisk Settings - repackage Magisk manager with a random name.
Magisk hide - select Pokemon Go.
But why aren't you googling all this?
XDA isn't a place to come to be spoon-fed.
Edit: Not that I care but you have not thanked a single helpful post.
Click to expand...
Click to collapse
i already done all like package magisk whit another name , but works just for a while then just come a advice say device not compatible but you right anyway, thanks a lots, and yes you care lol.... thanks for help buddy really you are great
but looks like i have to downgrade for play pokemon go ,sad day
---------- Post added at 04:16 PM ---------- Previous post was at 04:13 PM ----------
Magisk hide - select Pokemon Go., and thats looks like nol work fine because i check int magisk and its cant check safety net