[Q] (Q) Urgent: My Xoom stuck at booting screen - Xoom Q&A, Help & Troubleshooting

Hello everyone,
I just received an MZ604 Xoom from my friend, current OS is 4.0.3, and I want to upgrade it to 4.1. However, when I tried to root my device by Tiamat Kernel 1.3.1, after typing in cmd "fastboot flash boot boot.img", it's ok. Then I entered "fastboot reboot", the tablet just frozen at boot screen. Here is what I have tried so far and got no result:
- Try to restart it by holding power off and volume up
- Try to turn of completely by holding power off button (it didn't turn off)
- Factory reset from recovery mode
Can you guys help me on this, I'm a newbie to this stuff. Thank you very much!!!!!!!
In addition, my tablet was brought at Singapore, no there is no official upgrade to 4.1 ...

Can you get into fastboot mode? Volume down and power with your xoom off. If you can we can fastboot your xoom back to stock and start over from scratch. Is it a us version?

dfib1 said:
Can you get into fastboot mode? Volume down and power with your xoom off. If you can we can fastboot your xoom back to stock and start over from scratch.
Click to expand...
Click to collapse
I cannot even turn off my tablet, but I can enter fastboot mode by pressing Power + volumn up, then wait 2 sec and press volumn down to select. But I already factory reset it in recovery mode, problem still persists :crying:

ADICpanasonic said:
I cannot even turn off my tablet, but I can enter fastboot mode by pressing Power + volumn up, then wait 2 sec and press volumn down to select. But I already factory reset it in recovery mode, problem still persists :crying:
Click to expand...
Click to collapse
follow the steps here to install adb on your pc ADB one click it is a one click method
create and folder on your pc c:\xoom
download this file xoom wifi restore and unzip it into the folder you created.
click on the xoom_restore.bat
follow the on screen instructions.
try and reboot your xoom
let me know how you made out
---------- Post added at 11:50 PM ---------- Previous post was at 11:48 PM ----------
Your xoom will be back to stock out of the box. I know it sucks to start over but you should be running.

dfib1 said:
follow the steps here to install adb on your pc it is a one click method
create and folder on your pc c:\xoom
download this fileand unzip it into the folder you created.
click on the xoom_restore.bat
follow the on screen instructions.
try and reboot your xoom
let me know how you made out
---------- Post added at 11:50 PM ---------- Previous post was at 11:48 PM ----------
Your xoom will be back to stock out of the box. I know it sucks to start over but you should be running.
Click to expand...
Click to collapse
I enter "adb devices" in cmd and it gave me 16 digit number, so I guess I don't have to install adb again?
And by the way, follow your instruction mean my tablet will go back to android 3.0?

dfib1 said:
follow the steps here to install adb on your pc ] it is a one click method
create and folder on your pc c:\xoom
download this file and unzip it into the folder you created.
click on the xoom_restore.bat
follow the on screen instructions.
try and reboot your xoom
let me know how you made out
---------- Post added at 11:50 PM ---------- Previous post was at 11:48 PM ----------
Your xoom will be back to stock out of the box. I know it sucks to start over but you should be running.
Click to expand...
Click to collapse
Thank you very much!! It works!!!!

Related

[Solved]Boot Issue while trying to install EXT4Recovery - Please help

Hi,
I'm getting whitre HTC logo boot screen while booting the device.
I was trying to install 4EXTRecovery from ClockWorkMod recovery(By selecting install zip option)
Somebody please help. I'm not able to switch off the device.. Power+Volume UP+Volume Down not working
It's not Power+Volume UP+Volume Down not working
It's just Vol Down + Power... That's all
NiruBhai said:
Hi,
I'm getting whitre HTC logo boot screen while booting the device.
I was trying to install 4EXTRecovery from ClockWorkMod recovery(By selecting install zip option)
Somebody please help. I'm not able to switch off the device.. Power+Volume UP+Volume Down not working
Click to expand...
Click to collapse
I'm not quite sure what your issue is here it's one of two
1) Can't get into recovery?
I'm assuming tht you're device is S-OFF, you're root and have CWM installed?
If yes then I'd suggest that you download 4EXT application from market see link in my signature next to Recovery...(there is a free version) which will install the 4EXT recovery for you.
I'd also ensure that you set Settings->Power->fastboot = OFF
As said above to get into bootloader it's normally just Volume DOwn + Power.
2) If you're device is in a boot loop....then...
what you did should have worked fine. Look in my signature for various links...
Download and Install the adb & fastboot onto your PC. Ensure that you have HTC drivers on you PC if not also download and install the link in my signature.
Then fire up a CMD on your PC, go to directory where adb is and issue the command adb reboot recovery ?
which should take you into recovery.
EDIT: I must add that you shouldn't post the same problem in multiple threads.....it's against the rules for a start!
pls whats the advantage of 4EXT over CWM for recovery?
thanks
philos64 said:
It's not Power+Volume UP+Volume Down not working
It's just Vol Down + Power... That's all
Click to expand...
Click to collapse
Sorry.. Thats not working
---------- Post added at 07:29 PM ---------- Previous post was at 07:24 PM ----------
ben_pyett said:
I'm not quite sure what your issue is here it's one of two
1) Can't get into recovery?
I'm assuming tht you're device is S-OFF, you're root and have CWM installed?
If yes then I'd suggest that you download 4EXT application from market see link in my signature next to Recovery...(there is a free version) which will install the 4EXT recovery for you.
I'd also ensure that you set Settings->Power->fastboot = OFF
As said above to get into bootloader it's normally just Volume DOwn + Power.
2) If you're device is in a boot loop....then...
what you did should have worked fine. Look in my signature for various links...
Download and Install the adb & fastboot onto your PC. Ensure that you have HTC drivers on you PC if not also download and install the link in my signature.
Then fire up a CMD on your PC, go to directory where adb is and issue the command adb reboot recovery ?
which should take you into recovery.
EDIT: I must add that you shouldn't post the same problem in multiple threads.....it's against the rules for a start!
Click to expand...
Click to collapse
Im not even boot No keys are working for me.. Still having white screen with HTC logo. I tried the adb files you have provided. But I'm getting the below message:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
NiruBhai said:
Im not even boot No keys are working for me.. Still having white screen with HTC logo. I tried the adb files you have provided. But I'm getting the below message:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
Click to expand...
Click to collapse
Did you install the HTC drivers onto the PC?
Stupid question but is the phone plugged into the PC via USB?
ben_pyett said:
Did you install the HTC drivers onto the PC?
Stupid question but is the phone plugged into the PC via USB?
Click to expand...
Click to collapse
Its already installed and phone plugged in via USB
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
Shall I try to pullout the battery??
---------- Post added at 07:54 PM ---------- Previous post was at 07:36 PM ----------
I Have removed the battery and logged to boot screen by pressing Volume Down+Power Button.
But when I choose, recovery, it is going to white screen with HTC logo. How I can fix this guys??
adb is giving message as:
error: device not found
unchecked on settings "hot reboot" before.
After you can reboot with Vol Down + Power
philos64 said:
unchecked on settings "hot reboot"
Click to expand...
Click to collapse
Thanks for ur support bro.. But Im not even able to load the OS.. I think, the mentioned setting will come after loading the OS..
Can u please check my previous post..
@lynxnoon
That's just your choice.
I've got this two systeme of recovery on my DS
With 4EXTRecovery, it's much easier to convert all your partitions on 4EXT.
At the end, all your partitions are on 4EXT => much faster and sure.
4EXTRecovery has some additional tools to wipe and format more accurate.
In addition, it's customizable (themes, fonts, colors)
NiruBhai said:
Its already installed and phone plugged in via USB
---------- Post added at 07:36 PM ---------- Previous post was at 07:34 PM ----------
Shall I try to pullout the battery??
---------- Post added at 07:54 PM ---------- Previous post was at 07:36 PM ----------
I Have removed the battery and logged to boot screen by pressing Volume Down+Power Button.
But when I choose, recovery, it is going to white screen with HTC logo. How I can fix this guys??
adb is giving message as:
error: device not found
Click to expand...
Click to collapse
If you have to take battery out again, take it out when phone is finished booting up and has started to shut down again (has a black screen) before it starts re-booting up again and leave battery out for 10 seconds... DO not quickly pull out and re-insert battery that is what is most dangerous.
Do the same again, enter HBOOT, Try factory reset? see what happens?
If that doesn't help, do same again but take phone into FASTBOOT, with phone plugged in via USB (see if it changes to FASTBOOT USB) and attempt to get reponse from fastboot commands through CMD like last time fastboot reboot-bootloader
next step is to put phone into FASTBOOT through HBOOT and flash RUU which you'll find from http://forum.xda-developers.com/showthread.php?t=1002506
you'll need the one neareset what would have come on your phone originally.
ben_pyett said:
If you have to take battery out again, take it out when phone is finished booting up and has started to shut down again (has a black screen) before it starts re-booting up again and leave battery out for 10 seconds... DO not quickly pull out and re-insert battery that is what is most dangerous.
Do the same again, enter HBOOT, Try factory reset? see what happens?
If that doesn't help, do same again but take phone into FASTBOOT, with phone plugged in via USB (see if it changes to FASTBOOT USB) and attempt to get reponse from fastboot commands through CMD like last time fastboot reboot-bootloader
next step is to put phone into FASTBOOT through HBOOT and flash RUU which you'll find from http://forum.xda-developers.com/showthread.php?t=1002506
you'll need the one neareset what would have come on your phone originally.
Click to expand...
Click to collapse
I'm able to load OS(RCMix3D v1.0) now.. But getting random restarts..
I tried to select RECOVERY & FACTORY RESET from the hboot screen.. But its always giving the same white screen with HTC logo.. I need to remove the battery to Switch off the mobile at that time
While connecting USB cable in fast boot screen, it is getting changed to FASTBOOT USB.. But adb is not showing the device..
How can I reinstall recovery? (CWM or 4ExtRecovery)
Sent from my HTC Desire S using XDA App
NiruBhai said:
I'm able to load OS(RCMix3D v1.0) now.. But getting random restarts..
I tried to select RECOVERY & FACTORY RESET from the hboot screen.. But its always giving the same white screen with HTC logo.. I need to remove the battery to Switch off the mobile at that time
While connecting USB cable in fast boot screen, it is getting changed to FASTBOOT USB.. But adb is not showing the device..
How can I reinstall recovery? (CWM or 4ExtRecovery)
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
It's very rare that recovery can become corrupt and yet still partially function.
There us another link in my sig to install Cwm, but I'd personally recommend 4ext, again you'll find another link in my sig for that, there is a free version you instal the
application from market and that flashes the actual recovery
Half asleep now, so will check in later, good luck
Swyped from HTC Desire S using XDA Premium
ben_pyett said:
It's very rare that recovery can become corrupt and yet still partially function.
There us another link in my sig to install Cwm, but I'd personally recommend 4ext, again you'll find another link in my sig for that, there is a free version you instal the
application from market and that flashes the actual recovery
Half asleep now, so will check in later, good luck
Swyped from HTC Desire S using XDA Premium
Click to expand...
Click to collapse
I have reinstalled ClockWorkRecovery using ROM Manager and now the recovery working fine
Sent from my HTC Desire S using XDA App
Update:
Installed 4EXTRecovery using the APK available and installed the Recovery. Now everything working fine.. Thanks a lot for giving such a fast support guys
Sent from my HTC Desire S using XDA App
Great news! Glad to help!
NiruBhai said:
Update:
Installed 4EXTRecovery using the APK available and installed the Recovery. Now everything working fine.. Thanks a lot for giving such a fast support guys
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
That's great news! well done for continuing to try things and not just running crying to the service centre!
The restarts on customs can often be caused by not quite finished customs or simply incompatibility issues with apps etc.. 4EXT definitively best recovery as far as I'm concerned!
This is my first Android device so I'm also learning all the time that's why I have all the useful links in my sig as I know that I'd find them useful and so I'm sure other will and do!
Two tips - always take Nandoird backups before any significant changes and if you don't quite understand what you're doing then don't do it - simply spend more time reading until you do.
You can show your Thanks with the THANKS button!
Not able to find the thanks button on XDA mobile application.. Will give you the same after logging in from my laptop
Sent from my HTC Desire S using XDA App

[Q] Disabling fastboot in situation that the phone don't turn on

Hi every body.I installed virtuous unity on my desire s.Yesterday I changed radio of my phone and it's os crashed.I think it's fastboot is enabled, because I can't access to bootloader by keeping volume down and press power button. Thus I can't restore my backup.Can anybody help me??Thanks alot.
ebishirani said:
Hi every body.I installed virtuous unity on my desire s.Yesterday I changed radio of my phone and it's os crashed.I think it's fastboot is enabled, because I can't access to bootloader by keeping volume down and press power button. Thus I can't restore my backup.Can anybody help me??Thanks alot.
Click to expand...
Click to collapse
Did it crash during the radio flash?
Have you tried removing the battery, putting it back in the trying to get into bootloader?
Sent from my HTC Desire S using Tapatalk
ebishirani said:
Hi every body.I installed virtuous unity on my desire s.Yesterday I changed radio of my phone and it's os crashed.I think it's fastboot is enabled, because I can't access to bootloader by keeping volume down and press power button. Thus I can't restore my backup.Can anybody help me??Thanks alot.
Click to expand...
Click to collapse
1) What message have you got after updating radio? success or not.
2) have you checked the md5 of radio file before update
->anyway connect ur phone to the computer
-> make sure u have installed all htc drivers and ADB components
-> type adb reboot recovery
if you can go into recovery, now you can flash any ROM
Thanks guys.After updating the radio I got "successful ..." massage.Then I reboot my phone.After rebooting, HTC logo appears and stayed in this page. I waited a few minutes but nothing happened. Then I tried to go to the bootloader to restore my backup,but I couldn't access to the bootloader.(
I removed the battery but it didn't work.
---------- Post added at 03:03 PM ---------- Previous post was at 03:03 PM ----------
Thanks guys.After updating the radio I got "successful ..." massage.Then I reboot my phone.After rebooting, HTC logo appears and stayed in this page. I waited a few minutes but nothing happened. Then I tried to go to the bootloader to restore my backup,but I couldn't access to the bootloader.(
I removed the battery but it didn't work.
ebishirani said:
Thanks guys.After updating the radio I got "successful ..." massage.Then I reboot my phone.After rebooting, HTC logo appears and stayed in this page. I waited a few minutes but nothing happened. Then I tried to go to the bootloader to restore my backup,but I couldn't access to the bootloader.(
I removed the battery but it didn't work.
---------- Post added at 03:03 PM ---------- Previous post was at 03:03 PM ----------
Thanks guys.After updating the radio I got "successful ..." massage.Then I reboot my phone.After rebooting, HTC logo appears and stayed in this page. I waited a few minutes but nothing happened. Then I tried to go to the bootloader to restore my backup,but I couldn't access to the bootloader.(
I removed the battery but it didn't work.
Click to expand...
Click to collapse
Can you turn the phone at all, even if it gets stuck at the splash screen?
Do you have adb setup?
If you do turn the phone on and type "adb reboot recovery" you may have to type it a few times before it will reboot.
Sent from my HTC Desire S using Tapatalk
sagarda7 said:
1) What message have you got after updating radio? success or not.
2) have you checked the md5 of radio file before update
->anyway connect ur phone to the computer
-> make sure u have installed all htc drivers and ADB components
-> type adb reboot recovery
if you can go into recovery, now you can flash any ROM[/QUOT
Unfortunately I haven't checked the md5 of radio file
I installed HTC drivers and connected my phone to PC but computer couldn't detect my phone.(
Click to expand...
Click to collapse
Did you try adb?
Sent from my HTC Desire S using Tapatalk
cjward23 said:
Can you turn the phone at all, even if it gets stuck at the splash screen?
Do you have adb setup?
If you do turn the phone on and type "adb reboot recovery" you may have to type it a few times before it will reboot.
When I turn on my phone, the splash screen appears and the phone stick in this state and no button dose work.I can't do any thing.
Click to expand...
Click to collapse
ebishirani said:
cjward23 said:
Can you turn the phone at all, even if it gets stuck at the splash screen?
Do you have adb setup?
If you do turn the phone on and type "adb reboot recovery" you may have to type it a few times before it will reboot.
When I turn on my phone, the splash screen appears and the phone stick in this state and no button dose work.I can't do any thing.
Click to expand...
Click to collapse
ADB?
Sent from my HTC Desire S using Tapatalk
Click to expand...
Click to collapse
Look in my signature for various links...
Download and extract the adb & fastboot into a directory on your PC. Ensure that you have HTC drivers installed on you PC if not also download and install the link in my signature.
Then fire up a CMD on your PC, go to directory where adb is and issue the command
Code:
[B][COLOR="Blue"]adb reboot recovery[/COLOR][/B]
which should take you into recovery, where you'll be able to reflash or restore a nandroid backup from.
ben_pyett said:
Look in my signature for various links...
Download and extract the adb & fastboot into a directory on your PC. Ensure that you have HTC drivers installed on you PC if not also download and install the link in my signature.
Then fire up a CMD on your PC, go to directory where adb is and issue the command
Code:
[B][COLOR="Blue"]adb reboot recovery[/COLOR][/B]
which should take you into recovery, where you'll be able to reflash or restore a nandroid backup from.
Click to expand...
Click to collapse
Wonder why he can't get in to the bootloader though?
Sent from my HTC Desire S using Tapatalk
cjward23 said:
Wonder why he can't get in to the bootloader though?
Click to expand...
Click to collapse
Odd, although he has yet to comment on the success or failure of ADB? I suspect that he may not fully understand or be following our suggestions?
Could be that volume buttons broken, this happened to someone the other day - although in that case they were stuck in!
He has other options open to him
Code:
adb reboot [COLOR="Green"] --- then hold down volume buttons[/COLOR]
adb reboot bootloader
ben_pyett said:
Look in my signature for various links...
Download and extract the adb & fastboot into a directory on your PC. Ensure that you have HTC drivers installed on you PC if not also download and install the link in my signature.
Then fire up a CMD on your PC, go to directory where adb is and issue the command
Code:
[B][COLOR="Blue"]adb reboot recovery[/COLOR][/B]
which should take you into recovery, where you'll be able to reflash or restore a nandroid backup from.
Click to expand...
Click to collapse
Thanks a lot Ben.The speed of my internet is so slow (.I will download mentioned files and do your instructions.If it don't work,I will come back and announce it.
best regards.
ben_pyett said:
Odd, although he has yet to comment on the success or failure of ADB? I suspect that he may not fully understand or be following our suggestions?
Could be that volume buttons broken, this happened to someone the other day - although in that case they were stuck in!
He has other options open to him
Code:
adb reboot [COLOR="Green"] --- then hold down volume buttons[/COLOR]
adb reboot bootloader
Click to expand...
Click to collapse
Hi guys.I installed htc drivers(by this package: HTCDriver3.0.0.007) and adb folder which contains the files listed in the attached picture.When I typed "abd reboot recovery",in cmd I give this error massage: "device not found". please help me.(
ebishirani said:
Hi guys.I installed htc drivers(by this package: HTCDriver3.0.0.007) and adb folder which contains the files listed in the attached picture.When I typed "abd reboot recovery",in cmd I give this error massage: "device not found". please help me.(
Click to expand...
Click to collapse
And you tried this with the device turned on?
Sent from my HTC Desire S using Tapatalk
cjward23 said:
And you tried this with the device turned on?
Sent from my HTC Desire S using Tapatalk
Click to expand...
Click to collapse
Yes,When it was turn on even When it was turn off.But in both situation,There wasn't any successful.
ebishirani said:
Yes,When it was turn on even When it was turn off.But in both situation,There wasn't any successful.
Click to expand...
Click to collapse
And you tried the cmd a few times? Even though it looks like it is frozen on the splash screen there is stuff going on in the background. and adb will only start working after a certain point
Sent from my HTC Desire S using Tapatalk
cjward23 said:
And you tried the cmd a few times? Even though it looks like it is frozen on the splash screen there is stuff going on in the background. and adb will only start working after a certain point
Sent from my HTC Desire S using Tapatalk
Click to expand...
Click to collapse
I try it a few times,but there isn't any successful.The only message i give is:"device not found"
---------- Post added at 04:56 PM ---------- Previous post was at 04:26 PM ----------
The radio file that I flashed it to my phone is : Radio_12.59.60.26U_26.11.04.21_M.
The package of this file did not have "android-info.txt" file.To solve this problem I copied this file(android-info) from another radio file to the "Radio_12.59.60.26U_26.11.04.21_M" package.By did this I could install the radio on my phone.But after rebooting the device, it haven't worked.Can anybody help me to solve this problem?
thanks a lot.
---------- Post added at 05:44 PM ---------- Previous post was at 04:56 PM ----------
Nobody can help me??(
O!
ebishirani said:
I try it a few times,but there isn't any successful.The only message i give is:"device not found"
---------- Post added at 04:56 PM ---------- Previous post was at 04:26 PM ----------
The radio file that I flashed it to my phone is : Radio_12.59.60.26U_26.11.04.21_M.
The package of this file did not have "android-info.txt" file.To solve this problem I copied this file(android-info) from another radio file to the "Radio_12.59.60.26U_26.11.04.21_M" package.By did this I could install the radio on my phone.But after rebooting the device, it haven't worked.Can anybody help me to solve this problem?
thanks a lot.
---------- Post added at 05:44 PM ---------- Previous post was at 04:56 PM ----------
Nobody can help me??(
Click to expand...
Click to collapse
Where did you get this RADIO from? please provide a link to the source so that I can see.
Flashing a phones radio is one of the most potentially damaging things that you can do to your device and hacking a radio file prior to flashing is highly risky.
ben_pyett said:
Where did you get this RADIO from? please provide a link to the source so that I can see.
Flashing a phones radio is one of the most potentially damaging things that you can do to your device and hacking a radio file prior to flashing is highly risky.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=996630, This is a link to this radio file.
---------- Post added at 06:33 PM ---------- Previous post was at 06:27 PM ----------
ebishirani said:
http://forum.xda-developers.com/showthread.php?t=996630, This is a link to this radio file.
Click to expand...
Click to collapse
and it is another link : http://www.mediafire.com/?e5u78r5s3hk3kpy
---------- Post added at 06:37 PM ---------- Previous post was at 06:33 PM ----------
Oh my god!!!!!I didn't attention to the forum title,,,This radio file,is desire Hd's radio file.
---------- Post added at 06:55 PM ---------- Previous post was at 06:37 PM ----------
is it possible that the bootloader of the phone has damaged?If it is true,How can I modify the bootloader?Is it possible?

HELP!!!!!!! my Tf300T is now a TF201!!!!!!!

Hello,
I have since 2 month a TransformerTf300T, and yesterday i decided to unlock him and to root it
so i unlocked my tf300t with the asus tool and succeeded btw firmware v 9.4.3.30 i flashed cwm v5.8.3.4 en then i rooted my tf300t with rootDebufs from sparkym3 this also succeeded en then i wanted to try the custom Cyanogen mod nightlies (cm-9-20120717-Nightly-201.zip.
and then i see 201 and pressed yes O ohw but it installed the custom rom succesfully and i rebooted my device en and then i begans.
touchscreen not responding on any touch on the screen and when i connect te Tf300t to my pc it says that is a Tf201 ??? hmmm.
So i tried to install different custom roms but all say the same when i press yes
assert failed : getpropt("ro.product.device") == "tf300t" || getpropt("ro.build.product") ==tf300t
E:Error in /sdcard/cm-9-20120715.2227-SKANNY-tf300t.zip
(status 7)
installation aborted
this error i get with al the custom roms except the cm-9-201-20117-NIGHTLY-201 i'm only can install this custom rom
Ohw btw i made no backup from my stock rom, yes i know it is stupid but i thought by my self what can go wrong, and now i have a problem with it
so if anyone can help to restore my tf300t to function again, i am very pleased and my wife also it is her afteral so she is not so happy with it
i already say thanx to the people that reads this en decide to help me
greetings
Vipertjuh
Had the same error on twrp and Cwm touch recovery.
Installed the normal Cwm and flashing worked fine
Install this. Recovery
http://forum.xda-developers.com/showthread.php?t=1668173
mikaole said:
Had the same error on twrp and Cwm touch recovery.
Installed the normal Cwm and flashing worked fine
Install this. Recovery
http://forum.xda-developers.com/showthread.php?t=1668173
Click to expand...
Click to collapse
okay thnx i downloaded the image and what is fastboot and sdk and where can i get it
greetings
Which system is on your PC?
mikaole said:
Which system is on your PC?
Click to expand...
Click to collapse
Win 7 X64
Dl this
http://www.android-hilfe.de/attachm...tf300t-root-fastboot-treiber-adb-recovery.zip
Extract all to c:\trecovery\
Dl the recovery.img from the cwm thread and replace the one in the t recovery folder
Open cmd
Write
CD c:\trecovery\
Now you should be in the right folder
Connect your, pad, to the pc
Then write the 1st fastboot command from the cwm thread
When writing was a success
Write the 2nd command
As soon as the pad goes black hold volume -
And then vol+ to go to recovery
mikaole said:
Dl this
http://www.android-hilfe.de/attachm...tf300t-root-fastboot-treiber-adb-recovery.zip
Extract all to c:\trecovery\
Dl the recovery.img from the cwm thread and replace the one in the t recovery folder
Click to expand...
Click to collapse
ok thnx that is done and now how do i do the command can just start fastboot on the pc ???
Read post above
Changed it
mikaole said:
Read post above
Changed it
Click to expand...
Click to collapse
ok i did the steps, but by thefirst command i typed comes the message waiting for device
Okay windows didn't install drivers.
Thanks you have to follow the. Steps written here
http://wiki.cyanogenmod.com/wiki/Fastboot
Sry a bit to long to write here
Dn
Damn wait, I forgot to bring the pad. To fastboot
---------- Post added at 08:31 PM ---------- Previous post was at 08:27 PM ----------
Turn on your pad with vol- and power
When the text comes on screen let both loose and wait till 3 icons are on screen
With vol- choose the usb icon and then vol+ to enter
Then connect pad to pc
Sry have to go to work now. Hope you can do it now.
---------- Post added at 09:06 PM ---------- Previous post was at 08:31 PM ----------
On this thread is a video for installing drivers
http://forum.xda-developers.com/showthread.php?t=1697227
mikaole said:
Okay windows didn't install drivers.
Thanks you have to follow the. Steps written here
http://wiki.cyanogenmod.com/wiki/Fastboot
Sry a bit to long to write here
Dn
Damn wait, I forgot to bring the pad. To fastboot
---------- Post added at 08:31 PM ---------- Previous post was at 08:27 PM ----------
Turn on your pad with vol- and power
When the text comes on screen let both loose and wait till 3 icons are on screen
With vol- choose the usb icon and then vol+ to enter
Then connect pad to pc
Sry have to go to work now. Hope you can do it now.
---------- Post added at 09:06 PM ---------- Previous post was at 08:31 PM ----------
On this thread is a video for installing drivers
http://forum.xda-developers.com/showthread.php?t=1697227
Click to expand...
Click to collapse
Thnx I switched from laptop to pc. works better
thnx for your help i really appreciated your effort en time to help me, It Worked.
I Installed thhe Skanky custom rom en gapps en it works i am really a happy man with wife hahahah
Only one thing if i connect my tf300t to my pc/laptop it still recognize my tf300t as a tf201 is this also reverseble or not and gives this any trouble software ?
thnk you
:good::good:
Nice to hear that. Skang is one of the best.

[ROOT][CWM] Huawei Ascend Y201 Pro U8666

This is just a copy of the guide on myhuawei.net.
I did this because I had some trouble finding the guide since I always look for stuff like this here on XDA.
I also decided to do this because the guide was not in English and the translations by google were not so good.
Huawei Ascend Y201 Pro U8666​
Root + CWM Recovery​
I am not responsible for any damage you may do to your phone by following this guide.
The files you will need, download them and extract them to a folder on your desktop:
RootY201Pro.zip
UnlockBootloader.zip
Recovery.zip
(PS: Links removed, check post attachments)
- Now, get your phone and go to Settings > Developer Tools. Make sure USB debugging is enabled.
- Also disable Fastboot in Settings.
- Connect your phone to your computer via USB and let it install the drivers. Make sure they are installed correctly. Do not select "Turn on USB storage" on your phone.
Root + Unlock Bootloader:
1. Go to the folder on your desktop where you extracted the files.
2. Right click on unlockbootloader.exe and select 'Run as administrator'.
3. Click "ROOT Your Phone", the program will work and then close on it's own.
4. In your phone, go to the apps drawer and there should be a new app called Superuser.
5. Now go to your PC, open the same program, but this time click "Unlock BOOTLOADER".
6. Let it finish, the program will close on it's own, and then power off your phone.
7. Unplug the phone from the PC and we are done.
You have now successfully rooted and unlocked the bootloader of your device!
Installing CWM Recovery:
1. Turn off your phone if it isn't already.
2. Press and hold the following buttons simultaneously for ~10 seconds: volume down + home button + power button
3. Release the buttons and your phone should not boot, it should be 'stuck'. That's what we wanted.
4. Connect your phone to the PC via USB. It should install the drivers fine.
5. Open CMD and browse to the folder in your desktop.
6. Once you are in the folder type the following commands:
6.a) fastboot erase recovery, then press Enter. Let it work...
6.b) fastboot flash recovery recovery.img, press Enter and let it work again.
6.c) fastboot reboot, and press Enter...
7. Your device is now rebooting. You can unplug it from the PC.
You have now installed CWM Recovery.
Instructions on how to boot to CWM Recovery:
1. Turn off your phone.
2. Press at the same time for ~5 seconds: volume up + power button
3. You should be now on CWM Recovery.
Don't forget to say thanks or to donate!
Good phone and good post. Thanks.
Not work for me.
canetinhas said:
Not work for me.
Click to expand...
Click to collapse
it works. you must be doing something wrong. Tell me where you're having problems.
Yes it works. Be sure to have android drivers installed. Sorry about this newbie question, what is CWM Recovery? Can you point me to a link I can read about it? Thanks.
---------- Post added at 10:30 PM ---------- Previous post was at 10:24 PM ----------
Forget it, I used the search button..
do this the unlocked sim card?
drakkeman said:
do this the unlocked sim card?
Click to expand...
Click to collapse
no it does not
It is possible to have a stock rom and flash it? Thanks.
outlawz_pt said:
It is possible to have a stock rom and flash it? Thanks.
Click to expand...
Click to collapse
yes
Can U point me direction please? Thanks.
outlawz_pt said:
Can U point me direction please? Thanks.
Click to expand...
Click to collapse
what? sorry didn't understand what you said
Sorry, can you give me some information to search for a stock rom and flash instructions? Thanks.
outlawz_pt said:
Sorry, can you give me some information to search for a stock rom and flash instructions? Thanks.
Click to expand...
Click to collapse
?? I don't think you are familiar with these terms. what do you want? you want to root your phone or install cwm?
You're right, i´m not familiar with android flashing, only with WM. I though it was similar. I rooted phone following your instructions. Tried to install cwm but process stucked..
outlawz_pt said:
You're right, i´m not familiar with android flashing, only with WM. I though it was similar. I rooted phone following your instructions. Tried to install cwm but process stucked..
Click to expand...
Click to collapse
please check if you have really rooted your phone, check if there is superuser app among your apps
Yes I have.
outlawz_pt said:
Yes I have.
Click to expand...
Click to collapse
have you disabled fast boot? make sure you follow every step
I disabled fast boot. I will try again and post feedback.
---------- Post added at 11:31 PM ---------- Previous post was at 11:09 PM ----------
Success. Thanks again for your instructions. I'm backing up my system right now. If i make a factory reset should i get a huawei clean device or with operator stuff?
outlawz_pt said:
I disabled fast boot. I will try again and post feedback.
---------- Post added at 11:31 PM ---------- Previous post was at 11:09 PM ----------
Success. Thanks again for your instructions. I'm backing up my system right now. If i make a factory reset should i get a huawei clean device or with operator stuff?
Click to expand...
Click to collapse
glad you made it! Regarding your question, I don't know.. please share your results when you finish making the factory reset I would like to know as well.
It will keep operator data. Fortunately I removed SD card. Factory reset will format card..

TWRP screen unresponsive

For some reason my phone wouldn't accept the OTA update to 44S, but I was happy with 38R so stuck with that.
Now I see lollipop is coming, and (as I read it) some of the updates in 44S and the latest update contain updates which are required for lollipop, so I decided to upgrade by flashing it.
Stupid decision to do before my morning coffees, but there you go.
I downloaded the unofficial XNPH44S rom with a plan to install via TWRP.
Here is where I made rookie mistake number one; I wiped the phone before I adb pushed the rom zip across.
A little googling, and I discovered adb sideload so I think all is not lost.
Sideloading the rom seemed to work, so I rebooted back into TWRP (v2.8.1.0) to install the rom, and now my screen is unresponsive. I can't press any of the options, and pressing the volume or power buttons just brings up the swipe to unlock, which of course does nothing because the screen won't respond.
I can't go back to fastboot and install the rom that way (which, with hindsight, I realise was probably my best option in the first place) because I have no OS installed, and I can't do anything with TWRP because the buttons don't work.
Any suggestions, or am I screwed?
When it's connected via adb isn't there a command to reboot into boot loader? Adb reboot-bootloader or something? Google around.
Or turn it off and press vol up + power I think that takes you to bootloader mode. Check the noob guides for commands and steps I can't remember off hand what they are
---------- Post added at 08:04 PM ---------- Previous post was at 08:01 PM ----------
It's weird that twrp is unresponsive though...
ek69 said:
When it's connected via adb isn't there a command to reboot into boot loader? Adb reboot-bootloader or something? Google around.
Or turn it off and press vol up + power I think that takes you to bootloader mode. Check the noob guides for commands and steps I can't remember off hand what they are
---------- Post added at 08:04 PM ---------- Previous post was at 08:01 PM ----------
It's weird that twrp is unresponsive though...
Click to expand...
Click to collapse
I was being a noob and thinking that because 'adb devices' was showing none that fastboot wouldn't work.
Went back to 38R, installed 44S OTA (which made my phone bootloop as it has every other time I tried to install it) then did an adb sideload of the 44s to 05Q update.
Phone fixed, and up to date - now I just have to reinstall everything and remember passwords.

Categories

Resources