Hi,
To make to perfectly clear I am not a developer and my understanding of such issues should be classed as "novice" but I have done a lot of reading up and believe I now need to post a question regarding my problem.
Here goes...
I bought a 32gb off Amazon before Christmas which arrive with 4.4.4. I assumed after a few days of running it would update itself to Lollipop but to no avail, no matter how many times I "checked for updates". I now believe this is probably due to it being a Japanese import. I suspect this as this is on the barcode sticker and the Android with the hatch open logo in recovery has Japanese text underneath.
Anyways I posted a few questions on the Google community and they have basically told me to sit tight as the update is still rolling out. Seems to me that I could be waiting forever so I started to look at doing the manually install myself, remember I'm a amateur here...
I successfully downloaded the ADK file from Google and, even though this came with the USB drivers, I downloaded these seperatly too. I've since deleted the duplicate files.
The problem I am getting is I cannot get the USB drivers to install for when the phone is in USB debugging mode. When I put the phone into both PTP and MTP mode I can direct the driver location towards the folder and everything works OK, when its debugging mode it says they cannot be installed. I think its important to note that I am using Windows XP.
I've tried removing, restarting and reinstalling but to no avail.
Suspect its an XP thing, how do I get around this?
Thanks in advance!
iainwith2is said:
Hi,
To make to perfectly clear I am not a developer and my understanding of such issues should be classed as "novice" but I have done a lot of reading up and believe I now need to post a question regarding my problem.
Here goes...
I bought a 32gb off Amazon before Christmas which arrive with 4.4.4. I assumed after a few days of running it would update itself to Lollipop but to no avail, no matter how many times I "checked for updates". I now believe this is probably due to it being a Japanese import. I suspect this as this is on the barcode sticker and the Android with the hatch open logo in recovery has Japanese text underneath.
Anyways I posted a few questions on the Google community and they have basically told me to sit tight as the update is still rolling out. Seems to me that I could be waiting forever so I started to look at doing the manually install myself, remember I'm a amateur here...
I successfully downloaded the ADK file from Google and, even though this came with the USB drivers, I downloaded these seperatly too. I've since deleted the duplicate files.
The problem I am getting is I cannot get the USB drivers to install for when the phone is in USB debugging mode. When I put the phone into both PTP and MTP mode I can direct the driver location towards the folder and everything works OK, when its debugging mode it says they cannot be installed. I think its important to note that I am using Windows XP.
I've tried removing, restarting and reinstalling but to no avail.
Suspect its an XP thing, how do I get around this?
Thanks in advance!
Click to expand...
Click to collapse
Install the adb/fastboot drivers. Google is your friend
Firstly thank you for your reply.
I have tried your install but it hasn't worked. I can tell I have been following a smilar update route looking at the pictures you uploaded also, although these screen snaps were obviously from a new OS (windows 7 perhaps).
Whats interesting to note however, is that in my device manager the phone is clearly shown twice, at the top as "Android Device", with "Google Nexus ADB Interface" below it and then again further down as "Other Devices" with MTP below with the familiar yellow exclamation mark.
Significant?
You actually don't need debugging mode if you're intending to manually flash the ROM. Debugging mode is only an android setting and you flash the ROM using fastboot which is outside of android.
Also you don't need the SDK.
I would say go to general > sticky roll-up then read my adb and fastboot thread to start
Thanks for your reply.
I do indeed only want to install stock 5.0.1 Lollipop so your suggestion looks perfect.
However, I'm having problems predictably...
I've followed the adb and bootloader install instructions and this seems to have worked, I have also installed the driver suggested and it looks like this has worked to as when I look at the driver in device manager (remember I am using XP), the driver manufacturer is Clockmod (or something). However when I follow "Method 1" and execute flash.all.bat file the command window repeats the following lines until it times out:
"'fastboot' is not recognised as an internal or external command, operable program or batch file."
I have also tried opening another command window and typed in "adb devices" but the following error message appears:
'adb' is not recognised as an intern blah blah blah, you get the idea.
I guess I am still missing something and I'm sure its pretty obvious to you?
Thanks in advance.
iainwith2is said:
Thanks for your reply.
I do indeed only want to install stock 5.0.1 Lollipop so your suggestion looks perfect.
However, I'm having problems predictably...
I've followed the adb and bootloader install instructions and this seems to have worked, I have also installed the driver suggested and it looks like this has worked to as when I look at the driver in device manager (remember I am using XP), the driver manufacturer is Clockmod (or something). However when I follow "Method 1" and execute flash.all.bat file the command window repeats the following lines until it times out:
"'fastboot' is not recognised as an internal or external command, operable program or batch file."
I have also tried opening another command window and typed in "adb devices" but the following error message appears:
'adb' is not recognised as an intern blah blah blah, you get the idea.
I guess I am still missing something and I'm sure its pretty obvious to you?
Thanks in advance.
Click to expand...
Click to collapse
If you used the adb and fastboot installer in my thread, did you use the "install system wide" option?
If not, do.
If you did and it did not work, read more of that section as the manual steps are also mentioned, which you'll need to follow.
iainwith2is said:
Thanks for your reply.
I do indeed only want to install stock 5.0.1 Lollipop so your suggestion looks perfect.
However, I'm having problems predictably...
I've followed the adb and bootloader install instructions and this seems to have worked, I have also installed the driver suggested and it looks like this has worked to as when I look at the driver in device manager (remember I am using XP), the driver manufacturer is Clockmod (or something). However when I follow "Method 1" and execute flash.all.bat file the command window repeats the following lines until it times out:
"'fastboot' is not recognised as an internal or external command, operable program or batch file."
I have also tried opening another command window and typed in "adb devices" but the following error message appears:
'adb' is not recognised as an intern blah blah blah, you get the idea.
I guess I am still missing something and I'm sure its pretty obvious to you?
Thanks in advance.
Click to expand...
Click to collapse
You don't have adb/fastboot set up properly. Google 15 second adb install xda.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
You don't have adb/fastboot set up properly. Google 15 second adb install xda.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
He should already have it from my thread. Its just a question whether he used it correctly or whether it doesn't set up the environment variables on xp properly
Yes installed the 15 second install, Y,Y,N, then installed the Clockmod driver.
I'll go back and read it again, guess I must've missed something.
Have you rebooted? Try that. Is still no, you'll need to manually populate the environment variables.
Right, I have re-read the manual section and I can tell you I HAD edited the path before as I was following another instruction, one where it required SDK tools. So I have deleted the text I added last time (platform-tools was part of it) and copied and pasted the test in the manual area, including the colon.
Still cannot see the adb in the command window though?
iainwith2is said:
Right, I have re-read the manual section and I can tell you I HAD edited the path before as I was following another instruction, one where it required SDK tools. So I have deleted the text I added last time (platform-tools was part of it) and copied and pasted the test in the manual area, including the colon.
Still cannot see the adb in the command window though?
Click to expand...
Click to collapse
Don't copy and paste it. The text is generic. You must put your text there....then reboot.
this is what I pasted:
;c:\adb_fastboot
?
iainwith2is said:
this is what I pasted:
;c:\adb_fastboot
?
Click to expand...
Click to collapse
Which is generic. Is the folder your adb and fastboot executables are in called c:\adb_fastboot? If you used the installer, it is not.
Where would the installer put them? I've searched my computer for "fastboot" and its found the exe that I put in a folder on my desktop. This looks a similar address to what I changed the path to previously...
Oy vey
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Oy vey
Pardon?
Click to expand...
Click to collapse
OK so my path is broken so I won't be able to run adb commands?
Did you look at the root of c:? C:\adb perhaps? Its all covered in my thread isn't it? Are you reading it or skimming it? You don't even *need* to put it in the path. Its just easier. Please read to the end of the thread
Also, you don't need to run any adb commands
Yes I've scanned c: drive.
I've read and understood what I can, I'm not an expert so I can only compute what I understand.
I have reinstalled the adb setup a few times and I have noticed that it clearly says "0 files copied" after I select the exe files and system wide options.
I have also tried to run the adb and fastboot devices commands in the command window which gives me the aforementioned error messages.
For some reason, these programs are not being installed onto my machine?
Related
Hi,
My name is Joe aka AndroidSamurai.. I will be releasing more guides and media content in the weeks to come.
I'm currently very busy with "life events(new baby)" and apologize for my absence.
I will be updating this post since it was my original with a new guide updated to new SDK and Android methods.
Thanks again,
AndroidSamurai
Android4D Inc
<golf clap>
Well done.
</golf clap>
What do i do if the new hardware device notification doesnt pop-up ? NM i got it. Thanks for the writeup
@King_tee: Assuming windows, you follow the following steps.
1. Start > Control Panel > System.
2. Hardware > Device Manager
3. Click on the last icon below the File menu. It should correspond to "Scan for Hardware Changes."
If that doesn't work, try unplugging / replugging USB cable, different USB cable, restarting phone, restarting computer, etc.
If you never see the notification, navigate to the Device Manager(inside "System" in the control panel in XP and inside Device Manager on Vista).
You will see ADB Android Device at the top of the list with a Yellow Icon beside it meaning the device is not working. Right-click on the device and select "Update Driver".
Follow the dialogs that pop-up and navigate to where the unzipped drivers are at...
You should be good to go from there...
ok, i need some help please... I downloaded the SDK and followed the instruction in this thread, but when i try to update my driver for the phone, it says the driver is not compatible with my phone.. I am using Haykuro's ROM 4.5 with FW 1.5.. would that be the reason for this issue?
devildogg2001 said:
ok, i need some help please... I downloaded the SDK and followed the instruction in this thread, but when i try to update my driver for the phone, it says the driver is not compatible with my phone.. I am using Haykuro's ROM 4.5 with FW 1.5.. would that be the reason for this issue?
Click to expand...
Click to collapse
you may need to uninstall the current driver for your phone if you have mounted it before downloading the SDK. if you don't have the SDK setup the first time you plug the phone in then your computer will auto-update the driver to a regular UMS driver and it won't help you when you try adb. i forget how to uninstall your current driver since i don't use windows, but i'm sure you can find a nice crash course online
tubaking182 said:
you may need to uninstall the current driver for your phone if you have mounted it before downloading the SDK. if you don't have the SDK setup the first time you plug the phone in then your computer will auto-update the driver to a regular UMS driver and it won't help you when you try adb. i forget how to uninstall your current driver since i don't use windows, but i'm sure you can find a nice crash course online
Click to expand...
Click to collapse
I dont know if thats the problem because when i plug it in, it doesnt show up as a notification, and when i go to the device manager it shows the little yellow triangle.. I'll look again. Thanks for the quick reply though. I am no expert in linux, but i have it installed, let me see if i can figure it out there..
tubaking182 said:
you may need to uninstall the current driver for your phone if you have mounted it before downloading the SDK. if you don't have the SDK setup the first time you plug the phone in then your computer will auto-update the driver to a regular UMS driver and it won't help you when you try adb. i forget how to uninstall your current driver since i don't use windows, but i'm sure you can find a nice crash course online
Click to expand...
Click to collapse
ok, so i am in linux now, and i just noticed this guide was for windows.. lol can you or someone tell me how to install the SDK on linux?
devildogg2001 said:
ok, so i am in linux now, and i just noticed this guide was for windows.. lol can you or someone tell me how to install the SDK on linux?
Click to expand...
Click to collapse
Downloading
http://developer.android.com/sdk/1.1_r1/index.html
Installing
http://developer.android.com/sdk/1.1_r1/installing.html
Found through Google...imagine that.
as well as what xyrcncp said can you you can download it and just mv ~/Desktop/sdk/tools/adb /usr/bin/adb abd you should be able to run the adb commands from any directory. not too hard to cd to the correct directory but i personally don't like to type cd ~/Phone/tools/android-sdk/tools every time cause i tend to make typographical errors. let me know how it worked but you shouldn't have any problems at all
umm no offense but your writing a tutorial for people that are not sure on how to do this, so you must assume that they do not know how to run an executable file...... write yourself a better tutorial without actually bashing the self esteem of some people... tutorials are positive not negative. I already know all of this but still... dont degrade someone due to the fact they dont know how, thats the whole point of writing your tutorial. Nothing should have been left out (including how to run a .exe .com or .bat
" (If you do not know how to install a windows executable file, please kill yourself now! ) "
this isnt honestly written with any hatred towards you, it was a good tutorial. Just might want to think about how you write it next time.
The "bashing" comments in my tutorial are directed towards the people with a true sense of humor. My tutorial was written to tell you how to simply complete a task and not to make you feel better about yourself. I do not get pleasure in abusing people's self esteem nor do I enjoy putting people down.
Just because you got a little sand in your crack does not mean you need to come in a very honest and informative thread and start bashing the people who are bending over backwards to help everyone out.
The reason I created this "tutorial" in the first place was because all the other threads are full of "start searching and stop asking so many damn questions" comments.
So start looking in the mirror when you wake up in the morning and stop saying "My, I think I will run over to good ole' XDA and be an @$$ to everyone today".
I am sincerely sorry that a little sense of humor has caused so much hatred in my thread. Please contact the forum moderators and see if the think my tutorial is so hateful.
lol i dont see any hatred but anyway when i download the adb driver when extracting it says unknown method
@ Nabzilla1990
Are you using Windows or Linux?
Are you using the built-in Zip tool or 7-zip from the links I provided?
Are you using a 32 or 64-bit OS?
using the same operating system as you 64bit vista ultimate sp1 and using winrar to extract
Try using 7-zip man, I have been using it for 3 yrs now.
Basically what I am saying is that everything in my guide is guaranteed to work.
Just to add, if you take adb.exe and adbwinapi.dll and copy or move them to the \windows\system32 directory you can run adb from any dos directory prompt.
it worked with 7-zip thank you and also want to add if it doesnt work for some people plug in ur phone and update the usb mass storage with the usb driver from here and it should work i had that problem earlier
Okay, so I did everything and got up to run cmd, when I type in the cd C:\android-sdk-windows-1.1_r1\tools it says not a specififed folder, but when I type it without the \tools it doesnt work. can anyone help?
It seems as though a lot of people have had this problem for other phones but I haven't been able to find a solution to it (forgive me if its somewhere very obvious ).
After editing my framework-res.apk I am trying to push it back into my milestone through the SDK so I have tried to get my phone to show up while in recovery mode so I can push it back on.
The problem is that while in recovery my phone won't appear under "adb devices" I have tried using GOT's recovery and also the regular Openrecovery v1.37
Thanks
bump. i also need this. btw have you tried using a script to do it?
danboard said:
It seems as though a lot of people have had this problem for other phones but I haven't been able to find a solution to it (forgive me if its somewhere very obvious ).
After editing my framework-res.apk I am trying to push it back into my milestone through the SDK so I have tried to get my phone to show up while in recovery mode so I can push it back on.
The problem is that while in recovery my phone won't appear under "adb devices" I have tried using GOT's recovery and also the regular Openrecovery v1.37
Thanks
Click to expand...
Click to collapse
Did you read this thread?
http://forum.xda-developers.com/showthread.php?t=698059
and especially did you install this driver?
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
I do have read the thread and I have installed that driver. While in recovery mode using GOT's or OpenRecovery I notice that under device manager it says my phone is listed as "Android Phone" and if my phone is on and I connect it to my computer with USB debugging it lists it as "ADB interface". I can't get the phone to appear under adb devices while in recovery mode.
USB-Debugging active? (Settings-->Development)
It is when the phone is on, but what I am trying to do is push a file to the phone while its "off" in recovery mode so the usb debugging is irrelevant or so i believe.
Yes, sorry, you are right.
As I can remember, I have had a similar problem a year ago...
Try to copy adb into another directory and use it from there. Sounds stupid, but helped me in the past.
Sent from my Milestone using XDA App
I just tried changing my directory for the sdk but doesn't seem to help. Just to make sure is there anything i need to do once inside the OpenRecovery? After loading up the update.zip i connect it to my PC and in cmd I navigate to the SDK folder. So far thats all I m doing and checking its connected with "adb devices" which always comes up empty. Just want to make sure I m not missing any steps considering I have the usb drivers installed and the sdk SHOULD be installed correctly since i can access them when the phone is on.
danboard said:
I just tried changing my directory for the sdk but doesn't seem to help. Just to make sure is there anything i need to do once inside the OpenRecovery? After loading up the update.zip i connect it to my PC and in cmd I navigate to the SDK folder. So far thats all I m doing and checking its connected with "adb devices" which always comes up empty. Just want to make sure I m not missing any steps considering I have the usb drivers installed and the sdk SHOULD be installed correctly since i can access them when the phone is on.
Click to expand...
Click to collapse
I have the same problem as you described. Is it solved?
I am using windows 7 and the driver is also installed correctly. only problem is the empty device list..
micdim said:
I have the same problem as you described. Is it solved?
I am using windows 7 and the driver is also installed correctly. only problem is the empty device list..
Click to expand...
Click to collapse
Seems OK now. I just reinstalled official SDK.
dl.google.com/android/installer_r08-windows.exe
Team XDA Developers,
It's been a long frustrating evening and I write to you in a desperate plea for help. First off--YOU ARE ALL GENIUSES. That being said let my scrubby noobermcnooberstein train of thought commence.
Found a lot of help from 'drexman8244' on the Nexus S 'fastboot help?' thread and although I've made it decently far... I've hit a wall that I cannot overcome.
First--the specs. Running Windows XP SP3 32-bit. The phone is a Samsung GT-i9020 (aka Nexus S).
Second--I've successfully installed the Java SDK, the Android SDK, downloaded USB drivers from Google, downloaded/installed a copy of ADB into the '/SDK/tools' directory, configured the PATH value in the Windows System Environment variables in Control Panel 'System', and basically set things up to rock and roll.
Third--I turn on my Nexus S, enable USB debugging, and attach the device to the workstation. The system detects the device and produces the following output (which appears to install the Android ADB driver and successfully establish a connection to Nexus S). Verified this step by entering 'adb devices' in a command prompt. Working great!
Fourth--In the command prompt I enter 'adb reboot bootloader'. The device reboots... but here's where things get strange. The device enters Fastboot (bootloader) mode and the Windows workstation request an additional 'Android 1.0' hardware device driver to continue. (I've searched far and wide and can't seem to find something that resembles this driver)
Fifth--Regardless of my efforts to direct the Hardware Installation Wizard to the 'C:\Program Files\Android\android-sdk-windows\google-usb_driver' location on my workstation... it just doesn't seem to accept that as a valid driver for the device in Fastboot (bootloader) mode. Blows my mind.
Sixth--??? What steps do you fellas think I should take next?! I've obviously tried uninstalling the device from the workstation, rebooting the Nexus S and the workstation, attempting to install the ADB driver before attaching the device and rebooting into Fastboot. Nothing I've tried seems to work.
Any input is especially appreciated and I hope that there's nothing left out. Warm regards--
The Kid
Edit: Posted an album on the Imgur account in case anyone wants to look at screenshots of the steps provided.
Hey man what you need to do is this.....I had the same problem with drivers. Once I figured that out things ran smooth.
PDAnet drivers
http://forum.xda-developers.com/showthread.php?p=9861928#post9861928
webplus said:
Hey man what you need to do is this.....I had the same problem with drivers. Once I figured that out things ran smooth.
PDAnet drivers
http://forum.xda-developers.com/showthread.php?p=9861928#post9861928
Click to expand...
Click to collapse
You're a scholar and a gentleman--and absolutely right.
Looks like the default drivers from Google are borked. Downloaded the ones from PdaNet and things went smooth like butter. Thanks for making my day!!
haha no problem took me 6 hours of trying everything to figure out what I was doing wrong. Glad everything worked. If not for these forums and some great minds on these boards many of us would still be sporting a locked phone......so KUDOS to them!
bluetrevian said:
Team XDA Developers,
It's been a long frustrating evening and I write to you in a desperate plea for help. First off--YOU ARE ALL GENIUSES. That being said let my scrubby noobermcnooberstein train of thought commence.
Found a lot of help from 'drexman8244' on the Nexus S 'fastboot help?' thread and although I've made it decently far... I've hit a wall that I cannot overcome.
First--the specs. Running Windows XP SP3 32-bit. The phone is a Samsung GT-i9020 (aka Nexus S).
Second--I've successfully installed the Java SDK, the Android SDK, downloaded USB drivers from Google, downloaded/installed a copy of ADB into the '/SDK/tools' directory, configured the PATH value in the Windows System Environment variables in Control Panel 'System', and basically set things up to rock and roll.
Third--I turn on my Nexus S, enable USB debugging, and attach the device to the workstation. The system detects the device and produces the following output (which appears to install the Android ADB driver and successfully establish a connection to Nexus S). Verified this step by entering 'adb devices' in a command prompt. Working great!
Fourth--In the command prompt I enter 'adb reboot bootloader'. The device reboots... but here's where things get strange. The device enters Fastboot (bootloader) mode and the Windows workstation request an additional 'Android 1.0' hardware device driver to continue. (I've searched far and wide and can't seem to find something that resembles this driver)
Fifth--Regardless of my efforts to direct the Hardware Installation Wizard to the 'C:\Program Files\Android\android-sdk-windows\google-usb_driver' location on my workstation... it just doesn't seem to accept that as a valid driver for the device in Fastboot (bootloader) mode. Blows my mind.
Sixth--??? What steps do you fellas think I should take next?! I've obviously tried uninstalling the device from the workstation, rebooting the Nexus S and the workstation, attempting to install the ADB driver before attaching the device and rebooting into Fastboot. Nothing I've tried seems to work.
Any input is especially appreciated and I hope that there's nothing left out. Warm regards--
The Kid
Edit: Posted an album on the Imgur account in case anyone wants to look at screenshots of the steps provided.
Click to expand...
Click to collapse
as far as the USB driver and such, dont point it directly at the USB-driver folder point it at the SDK folder and then click the box that searches the sub folders
The drivers from Google aren't borked. You install one driver - the "normal" Android USB interface - for when the phone is plugged in and fully booted, and another - the "Fastboot" interface - for when the phone is plugged in but in recovery. For the latter, you have to pick the driver manually and do a force install, as Windows won't recognize the device.
Both drivers are available in the usb-drivers directory in the Android SDK directory, provided you loaded the SDK manager and downloaded the USB drivers.
jimmypopulous said:
The drivers from Google aren't borked. You install one driver - the "normal" Android USB interface - for when the phone is plugged in and fully booted, and another - the "Fastboot" interface - for when the phone is plugged in but in recovery. For the latter, you have to pick the driver manually and do a force install, as Windows won't recognize the device.
Both drivers are available in the usb-drivers directory in the Android SDK directory, provided you loaded the SDK manager and downloaded the USB drivers.
Click to expand...
Click to collapse
This is correct. Oddly, I had no problems searching with the driver with the wizard on my win7 x64 pc, but had to manually point it for the fastboot relevant driver on my laptop, running the same OS.
Basically, as jimmypopulous says, you need to manually select the usb driver when you're in fastboot, according to my experience.
I hear what folks are saying about the Google USB drivers working fine for most installs.
That being said... No matter how many times I manually provided the path to the Google Fastboot driver location the OS refused to accept them as valid. (Seems like there are others that experienced this problem from a quick glance at the forums.)
In either case it seems as though the alternative drivers resolved the problem and I appreciate all the feedback that was given!
The Kid
I had the same issue - my Nexus One always worked fine on my laptop but even after updating the SDK & drivers I couldn't get fastboot to work with my Nexus S.
ADB worked fine but my laptop didn't recognise my phone properly via fastboot.
After installing PDANet, fastboot works as well now - thanks very much for your help, my NS is now rooted!
Hi,
This is my first post so bear with me and let me know if I'm outta line in any way.
I'm trying to root my nexus s and I am running XP. I can get ADB devices to work but when it comes to fastboot my device is not recognised. I have been trying for a couple of days and still cannot get it to work! I have installed PDAnet and and tried force installing the drivers but I can' get them to install. When I click install driver from a list and browse to the drivers it says that the specified location does not have information about your hardware. Is there something I am doing wrong here? Is there another way I can force install the driver?
Also I am a MASSIVE NOOB so please try and be specific when giving me directions.
Thank you XDA Overlords!
Uninstall all references to the drivers. your phone should show up with a bang once done properly.
Then follow the excellent guides here to root your phone properly
Sent from my Nexus S
Also make sure you have the phone connected and in fastboot mode when you install PDAnet.
Sent from my Nexus S using XDA App
Adding these 2 lines in the android_winusb.inf file from the google "usb_driver" folder helped me.
;Nexus S
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_4E20&REV_0100
Click to expand...
Click to collapse
Detailed:
If your PC displays "Android 1.0" in Device Manager (when you try to connect the phone through fastboot), then go to Android 1.0, Properties, Details tab. Select Hardware ids.
USB\VID_18D1&PID_4E20&REV_0100 This part should be exactly the same with the one you add in "android_winusb.inf"
When you say uninstall all references what do you mean? Again, I am a massive noob. Do you mean uninstall the device with USBDeview from all the previous times I have tried installing it? I've tried that multiple times and still can't get it to work
matt2053 said:
Also make sure you have the phone connected and in fastboot mode when you install PDAnet.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
When I try install PDAnet with the ns in fast boot mode the installer says please connect your phone to complete the installation. Is there another way to install it where this won't happen?
lambda30 said:
Adding these 2 lines in the android_winusb.inf file from the google "usb_driver" folder helped me
Detailed:
If your PC displays "Android 1.0" in Device Manager (when you try to connect the phone through fastboot), then go to Android 1.0, Properties, Details tab. Select Hardware ids.
USB\VID_18D1&PID_4E20&REV_0100 This part should be exactly the same with the one you add in "android_winusb.inf"
Click to expand...
Click to collapse
In fastboot the ns just comes up as unknown device with hardware id of USB\UNKNOWN.
I tried just entering that id into the .inf file but that didn't help.
Anyone got any other ideas?
Thank you for these ideas I'm not gonna give up yet!
thejug02 said:
When I try install PDAnet with the ns in fast boot mode the installer says please connect your phone to complete the installation. Is there another way to install it where this won't happen?
Click to expand...
Click to collapse
Maybe the installer has changed since I did it.
Try running PDA install, put phone in fastboot, then plug in when prompted.
Sent from my Nexus S using XDA App
matt2053 said:
Maybe the installer has changed since I did it.
Try running PDA install, put phone in fastboot, then plug in when prompted.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Yea maybe it did change. When I run the installer it stops and requests that you connect the device and put it in debugging mode. When you connect the ns in fastboot it doesn't read it as the ns so just continues to ask you to connect the ns.
Thanks for the idea though! Keepem coming people!
I just uninstalled the drivers from my laptop and installed again using PDAnet method. It worked without a problem.
The only other thing I can think of is to boot phone and make sure USB Debugging is checked and try again.
Sent from my Nexus S using XDA App
lambda30 said:
Adding these 2 lines in the android_winusb.inf file from the google "usb_driver" folder helped me.
Detailed:
If your PC displays "Android 1.0" in Device Manager (when you try to connect the phone through fastboot), then go to Android 1.0, Properties, Details tab. Select Hardware ids.
USB\VID_18D1&PID_4E20&REV_0100 This part should be exactly the same with the one you add in "android_winusb.inf"
Click to expand...
Click to collapse
It helped me too! It must be added under the [Google.NTx86] box
A few days ago I've tried using ADB but it said my device is offline. Earlier I tried ADB over network. Again, it said my phone is offline. So I wanted to see if I can get ADB access from the bootloader. Surprize: I can't get into the bootloader. If I turn my phone off and press Volume Down + Power, it just boots.
Now, my phone is working good, I just wanted adb access to do that darn EFS backup. And what's up with that "can't get into bootloader" stuff? I did it fine and dandy when I rooted my phone..
EDIT: well, since I can not do the backup the normal way, I just downloaded the efs folder as a zip. and dev/block/. Is it as effective as the normal way?
andrei1015 said:
A few days ago I've tried using ADB but it said my device is offline. Earlier I tried ADB over network. Again, it said my phone is offline. So I wanted to see if I can get ADB access from the bootloader. Surprize: I can't get into the bootloader. If I turn my phone off and press Volume Down + Power, it just boots.
Now, my phone is working good, I just wanted adb access to do that darn EFS backup. And what's up with that "can't get into bootloader" stuff? I did it fine and dandy when I rooted my phone..
EDIT: well, since I can not do the backup the normal way, I just downloaded the efs folder as a zip. and dev/block/. Is it as effective as the normal way?
Click to expand...
Click to collapse
It is Vol-Up + Power for bootloader. And you can't have adb access in bootloader mode. Only fastboot access.
Ok but why isn't adb working? Why does it always say it's offline?
Sent from my Google Nexus S
andrei1015 said:
Ok but why isn't adb working? Why does it always say it's offline?
Sent from my Google Nexus S
Click to expand...
Click to collapse
It could be that you installed some software/driver that overrides a working USB driver.
Try install Google USB driver from Android SDK Tools.
Install Android SDK Tools
When SDK Manager runs, select Google USB Driver, see attached pic
If missed, run SDK Manager again as Administrator
Also, make sure you turn on Developer options and "check" Andoid (USB) debugging option in Developer options setup.
_android_ said:
It could be that you installed some software/driver that overrides a working USB driver.
Try install Google USB driver from Android SDK Tools.
Install Android SDK Tools
When SDK Manager runs, select Google USB Driver, see attached pic
If missed, run SDK Manager again as Administrator
Also, make sure you turn on Developer options and "check" Andoid (USB) debugging option in Developer options setup.
Click to expand...
Click to collapse
Yup, I have all of the above.. Still offline >.<
andrei1015 said:
Yup, I have all of the above.. Still offline >.<
Click to expand...
Click to collapse
Do you have the Samsung Galaxy Nexus ADB interface showing in your device manager?
Try uninstall and reload again.
Almost = https://dl.dropbox.com/1/view/xiulpm329s4wxcd/Apps/CloudShot/shot_25022013_192328.png
Still it says offline.
(thank you for trying to help me )
In fastboot mode it looks like this:
just tested at work and it says "device" instead of "offline" which is good I think. The only difference is that at work I installed the SDK long after I got it at home and it has a slightly different folder structure and it also comes with eclipse.
Resolved. Downloaded the new SDK with ADT from the android site and it works. Please forgive me for posting so many times. Can someone please delete this thread?
andrei1015 said:
Resolved. Downloaded the new SDK with ADT from the android site and it works. Please forgive me for posting so many times. Can someone please delete this thread?
Click to expand...
Click to collapse
Good for you.
Anyway, if you followed post #4 and installed the new SDK Tools, would have saved you a lot of time.
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
ericdg said:
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
Click to expand...
Click to collapse
ADBSetup will get you the drivers you are looking for:
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Worked for any Android phone I tried.
Thanks, I'll give that a shot and see what happens!
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
ericdg said:
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
Click to expand...
Click to collapse
Easiest way to tell is open up a command prompt in the folder that adbsetup installed to (C:\ADB I think) and type:
Code:
adb devices
If all is well, then the device will be part of the listing.
Thanks Joel.............I think it worked.
The ADB command came back with:
List of devices attached
HT22_______7 device
That's not a number that I've ever seen associated with my phone, but I assume that's it.
Confirmed.................I was able to reboot the phone by ADB!
Excellent! This will also mean the fastboot commands needed to unlock your bootloader will work too.
.........one would think so, Joel, but I can't get fastboot to do anything. ADB recognizes the phone, and will reboot into bootlocker, but once there it'll do nothing. Windows pops up a message shortly after bootlocker opens that says something to the effect of "there was a problem with USB device not recognized". I tried the command "fastboot devices", but got nothing. I know that I'm darned close, and it's probably something simple, but just can't get it to work. Maybe I need additional drivers for fastboot, or need to move it to another directory?
Thanks,
~E
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
joel.maxuel said:
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
Click to expand...
Click to collapse
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
ericdg said:
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
Click to expand...
Click to collapse
Dont know where you got your HTC drivers, but you should try the ones in this post (step one - hopefully its still live - if not I can dropbox it for you):
http://forum.xda-developers.com/showthread.php?t=1801106
Sent from my LG-D520 using XDA Free mobile app
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
ericdg said:
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
Click to expand...
Click to collapse
Uh-oh. Either the link was dead when I went through this process back in April, or I had bad organizing skills at one point and didn't put the file in the Doubleshot folder before completing a purge. Either way, I don;t have the file.
Nor did I really need it. The second Doubleshot I rooted I ended up using it in my native Linux environment (no drivers needed), vs my Windows XP emulated through VirtualBox. That's what you could do. Get a live Debian DVD (Im like the XFCE desktop version), boot in, get fastboot:
Code:
sudo apt-get install fastboot
And then use fastboot:
Code:
sudo fastboot ...
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
ericdg said:
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
Click to expand...
Click to collapse
Just need the one. My recommended file to download is this:
http://cdimage.debian.org/debian-cd...ybrid/debian-live-7.6.0-i386-xfce-desktop.iso
Burn the image (not the file) onto a DVD (can be a rewritable) and reboot with the disc in the drive. Once it's fully loaded, you can either enter commands by clicking on the "terminal" icon on the bottom of the screen (preferred), or press Ctrl + Alt + F1 to get a prompt (may have to log in as "user", there shouldn't be a password). Hope this helps.