Database Info

[Q] Updating xperia arc s 4.0 to jely beam 4.1.2

First of all its my first time i found that arc s can update to jelly beam, so i try to do it but i can't understand anything about flashing and other.
ROM Installed
-downlaod ROM and extract it you can get JellyBean_V06.zip and boot_V06.img
-copy JellyBean-V06.zip to SDCARD
-Download LT18i 587 Stock ROM OR BASEBAND V77
-Flash stock rom OR BASEBAND V77 with Flashtool
-Flash boot_V06.img
-power on and enter CWM mode
choose install zip from sdcard and select JellyBean-V06.zip to install
-wait for install completed and re boot to enter ROM and use.
I download the files, i extract JellyBean_V06.zip and boot_V06.img,
and past itin sdcard, but ican't understand
how to (Flash stock rom OR BASEBAND V77 with Flashtool)
how to (Flash boot_V06.img)
and
how to
(ower on and enter CWM mode
choose install zip from sdcard and select JellyBean-V06.zip to install
wait for install completed and re boot to enter ROM and use.)
some buddy help how i do this,is there is any video tutorial it will be easy than.

Using Flashtool, try this, hope it helps
http://forum.xda-developers.com/showthread.php?t=928343
Don't forget to thank them.
You can flash both *.ftf and *.img files via flahtool
To get to CWM, after power on, when the kernel starts, there usually a short vibrate, push vol down
While in that state, the rest is the same steps as you already have.
Hope this help.
Cheers.

Upgrade canvas 2 to jellybean

THERE ARE MANY WAYS TO UPGRADE UR CANVAS 2 TO JELLYBEAN.SO TODAY I AM DISCUSSING ALL THE METHODS IN THIS SINGLE POST.
THE FIRST METHOD....
the first way that is most often searched is to upgrade canvas 2 to official unrooted jellybean that is realeased by micromax.
I had already made a complete tutorial of this in my pevious thread. So if u want to upgrade to stock unrooted jellybean rom (i.e. v3) go the this link-
Link: http://forum.xda-developers.com/showthread.php?t=2368391
U CAN ALSO FLASH SUVI ROM V9 AS IT IS SP FLASH TOOLS FLASHABLE.ITS PROCEDURE OF FLASHING IS DAMN SAME AS MENTIONED IN ABOVE THREAD.
FLASHING SUVI ROM V9 METHOD CAN ALSO BE USED IF U ARE GETTING ANY KINDA ERROR IN ROOTING UR FONE OR PORTING CWM LIKE BROM ERROR:S_DA_SOC_CHECK_FAIL(3013) AS THIS ROM IS PRE ROOTED.
SECOND METHOD.......
The second method is to upgrade already rooted canvas 2 to rooted jellybean roms.
1.first of all download the stock jellybean zip file and place it in the root of ur fone's sd card i.e. outside any folder(just for sake of convinience).
LINK:
d-h.st/jGx
THIS IS A PRE ROOTED BUT SAME AS OFFICIAL JELLYBEAN ROM
2.boot into recovery by holding vol up+ vol down +power buttons simultaneously.
3.now wipe data/factory reset and also wipe cache partition.
4.go to advanced and wipe delvic cache.
5.now go back and select install zip from sd card and then choose zip from sd card.
6.locate the zip file and select it.let the installation complete.
7.go back and select reboot fone now.
WITH THIS U HAVE SUCCESSFULLY UPGRADED UR CANVAS 2 TO JELLYBEAN.
THERE ARE ALSO MANY OTHER JELLYBEAN ROMS FOR CANVAS 2. i am listing a few here.
1.jmp rom-LINK:
goo.im/devs/jigarmpattani/Micromax_A110/JMP_Jelly%20Bean/JMPv11.5_JB-4.1.1_25-May-2013.zip
2.suvi rom-link:
d-h.st/Imy
3.raven rom-link:
https://docs.google.com/file/d/0ByHiJVjjrE83ZnVRZDBFZ0pJQnM
4.lewa os-link:
d-h.st/y9T
5.dr bhokhali rom-link:
d-h.st/mg2
AND MANY MORE..
VERYY IMPORTANT- PLEASE MAKE SURE THAT U HAVE A FILE NAMED BOOT.IMG IN UR ZIP FILE OF DOWNLOADED ROM.
IF U CANNOT BOOT.IMG FILE IN UR ROM THAN *DO NOT* DIRECTLY FLASH IT. FIRST FOLLOW THESE STEPS.
1.download boot.img file from below link
link:d-h.st/sgS
2.now extract ur rom'zip file using winrar or 7zip to any specified folder.
3.paste the above downloaded boot.img file in that folder and then zip it again using winrar or 7zip.
PLEASE MAKE SURE THAT U *ZIP* ALL THE FILES OF THE EXTRACTED FOLDER AND NOT THE FOLDER ILSELF.
IF U DONT PLACE BOOT.IMG IN UR ROM THAN U WILL SIMPLY BE STUCK AT BOOT LOGO.
WELL WITH ALL THIS *MESS* U WILL BE ABLE TO UPGRADE UR CANVAS 2 TO JELLYBEAN.
hit thx:thumbup: if i helped...

[GUIDE] How to flash stock/custom kernel without using recovery or odin

Here is a meathod to flash stock/custom kernel using UKF for those who are new to these things
Q: What is UKF ?
UKF is UNIVERSAL KERNEL FLASHER developed by @frapeti Original thread
Playstore link- https://play.google.com/store/apps/details?id=com.frapeti.ukflash2
Prerequisites-
1. A Galaxy S4 (I9500/I9505)
2. The phone must be rooted
3. Any Stock/Custom kernel
Procedure-
-For Stock kernel
1. Download UKF from Playstore.
2. Extract the Firmware package whose kernel you want to flash there u will get boot.img file.
3. Copy that boot.img file to your SD card
4. Open UKF, Press "Select a Kernel Image (bin/img/md5)"
5. Select that boot.img file that you previously copied to your SDcard
6. Then Press 'Flash Kernel Image'
7. Thats it click on reboot and its done
-For Custom Kernel
1. Download UKF from Playstore.
2. Extract the .zip file of the kernel you want to flash.You will get a file with .img , .bin or .md5 extension
3. Copy that file to your SD card
4. Open UKF, Press "Select a Kernel Image (bin/img/md5)"
5. Select that file that you previously copied to your SDcard
6. Then Press 'Flash Kernel Image'
7. Thats it click on reboot and its done
This meathod is more useful for those who want to flash stock kernels as their flashable zips are not available.
Others who may not want to use custom recovery can find it useful
BUT DO IT CAREFULLY SELECTING WRONG IMAGE FILE CAN RESULT IN HARDBRICK TOO
HIT THANKS IF YOU FIND IT USEFUL

Bump
Sent from my GT-I9500 using XDA Free mobile app

[TWRP 2.7.00 ][GT-S7500] Recommended recovery for CM11 and Speedmod

For newbies who come across status 6 , 7 error while installing Speedmod or CM11 Rom or Inspiration ROM.
Please find the TWRP touch recovery 2. 7. 0. 0
HOW TO INSTALL.
Using CWM
1Downld twrp 2.7.00****.zip file
2Copy zip to sd card
3 Go to cwm recovery
4 choose and Install zip
5 select Reboot to recovery n done.
http://forum.xda-developers.com/attachment.php?attachmentid=3246231&d=1428229542
OR
Using ODIN(read carefully)
1 Downld the recover.tar.zip
2 then Extract the zip file using winzip or winrar.
3 u will get "recovery.tar"
4 flash this tar file using odin on ur pc.
http://forum.xda-developers.com/attachment.php?attachmentid=3315198&d=1431752787
NOTE :
ALWAYS TAKE CURRENT BACKUP BEFORE INSTALLING NEW ROM.
ALWAYS DO FULL WIPE (DATA. CACHE, DALVIK) BEFORE YOU INSTALL ROM.

@naik2902 which one among the 2 zip files should I install ??

techsammy said:
@naik2902 which one among the 2 zip files should I install ??
Click to expand...
Click to collapse
1 st one . u can flash it using ur cwm recovery.

Thanks again you're a lifesaver

After FLASHING Given a white screen

After FLASHING Given a white screen ​

try to boot in download mode and flash twrp 2.5.0.0 https://www.dropbox.com/s/w3i0u88ut26d2op/twrp-build-3-06052013-trebon.zip

does I it support for flashing any ROM???

[TWRP FLASHABLE] Latest Stock MM ROM for G4c

Hey guys!
I have created a TWRP flashable zip of latest Stock MM Rom for G4c.
ONLY FOR H525N​
Requirements:
(1) Unlocked Bootloader
(2) TWRP
Steps:
(1) Download the ZIP here.
(2) Copy it to your phone.
(3) Reboot into TWRP.
(4) Select "Install". Select the zip file you downloaded in the first step.
(5) Swipe to flash. Wait for it to flash. It might take some time. Wipe Dalvik/Cache to avoid bootloops.
(6) Select Reboot.
You have successfully flashed MM!
If you want root, download SuperSu Flashable Zip. Reboot into TWRP. Select the SuperSu flashable zip. You have successfully rooted!
I will keep updating the ZIP as and when LG releases a new ROM or patch.

Hey, could you send the link? It is broken. I fix my fathers phone.