Hey guys!
I have created a TWRP flashable zip of latest Stock MM Rom for G4c.
ONLY FOR H525N
Requirements:
(1) Unlocked Bootloader
(2) TWRP
Steps:
(1) Download the ZIP here.
(2) Copy it to your phone.
(3) Reboot into TWRP.
(4) Select "Install". Select the zip file you downloaded in the first step.
(5) Swipe to flash. Wait for it to flash. It might take some time. Wipe Dalvik/Cache to avoid bootloops.
(6) Select Reboot.
You have successfully flashed MM!
If you want root, download SuperSu Flashable Zip. Reboot into TWRP. Select the SuperSu flashable zip. You have successfully rooted!
I will keep updating the ZIP as and when LG releases a new ROM or patch.
Hey, could you send the link? It is broken. I fix my fathers phone.
Related
Ok, I've been searching a lot on how to root these device and haven't found a single working root method for the latest firmware on the Korean variant specifically [L] variants. I haven't tested on other devices, so i can't guarantee that it will work on yours too.
So I spent hours experimenting on my Phone, good thing I didn't bricked it and no side effects received from rooting.
DISCLAIMER: Rooting your phone will void your warranty, and can be dangerous. Root at your OWN RISK!
Note: this will tick ur KNOX counter!
Things you needed are: (Links added)
1. Cofface S4 recovery: http://d-h.st/TLT
2. Odin (Already Included in cofface s4 recovery)
3. SuperSU flashable zip (For Permanent Root) : http://download.chainfire.eu/supersu
Steps:
1. Copy the flashable supersu zip on your memory card. (i put mine on /android/obb since the recovery cant see it in other folders.)
2. Flash cofface s4 recovery.tar via Odin, flash it as PDA or AP on latest versions of Odin.
3. After flashing the recovery.tar it will automatically reboot to the recovery (dont use the root/unroot method included in the recovery. IT WILL NOT WORK ON LATEST FIRMWARES!)
4. while in recovery choose install from sd card and flash the supersu zip that you downloaded.
5. Wipe Dalvik (just to make sure)
6. Reboot & Enjoy.
Other variants, if you try this method please do report back so we will know if it works on your phone models too.
Thanks To:
Cofface for the recovery
Chainfire for SUPERSU
Tested Only Stock Based Rom V20E ..
first install root and recovery..
..::İnstallation::..
Download file zip
copy to sdcard zip file..
go to recovery..
Flash file zip by custom recovery
reboot system
happy ending
Do not forget to click the thanks button.
..:: Download ::..
Green
http://www.mediafire.com/download/ugvydaagc8afis6/Cyberfunk++Green+Font.zip
Blue
http://www.mediafire.com/download/bdocm5bb127cdq5/Cyberfunk++Blue+Font.zip
HAPPY NEW YEAR
Screenhost
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
ahmed2014011 said:
Mokee android 7.1 .1 for lenovo A6010 plus [camera and flash work]
Download rom for a6010 plus:
open gapps pico:
INSTALL USING TWRP
1. Download and transfer the ROM and Gapps files to internal storage.
2. Boot your device into TWRP recovery. You can simply Google how to enter recovery mode on your device.
3. In TWRP recovery, click on Wipe » Advanced Wipe. Here select the following options shown in the screenshot below. Do not select the option which reads ‘Internal Storage‘ at any cost, as it will wipe off EVERYTHING, including your ROM file.
4. Go back to TWRP main menu, tap on Install and select the rom Zip file that you transferred to your device in Step 1.
5. After selecting the .zip file, do Swipe to Confirm Flash on the bottom of the screen to begin the custom ROM installation process. This may take some time.
6. Once your ROM is successfully flashed, you’ll see Wipe cache/Dalvik option, select it and then do Swipe to wipe on the bottom of the screen.
7. Now flash the rom Gapps file similarly like you flashed the ROM file.
8. After flashing both ROM and Gapps files, reboot your device.
Click to expand...
Click to collapse
Could you please supply direct links, ppc links are not allowed on xda
Regards
Sawdoctor
1. NOTE: you must have TWRP recovery installed. If you do not, go here:
https://forum.xda-developers.com/oneplus-6/how-to/guide-how-to-install-official-twrp-t3801558
2. Download to your phone the newer OOS full version from here:
https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
3. Make sure that you have TWRP installer zip on your phone
4. Make sure that you have the Magisk 16.4 zip on your phone
5. Reboot your phone into TWRP recovery
6. Install the downloaded OOS full version zip from you internal storage
7. DO NOT REBOOT
8. Install the TWRP installer zip
9. Reboot into TWRP recovery
10.Install the Magisk 16.4 zip
11.Reboot System
Credits to: lollyjay
Here is another thread if you need more help: https://forum.xda-developers.com/showpost.php?p=76596833&postcount=3
Deleted
Confusi0n said:
Can someone please just make a detailed guide on how to update from 5.1.8 rooted to 5.1.9 rooted so I can edit this post and replace it with a guide.
Click to expand...
Click to collapse
There's plenty of info already available... no need for yet another guide.
Try this https://forum.xda-developers.com/showpost.php?p=76596833&postcount=3
If you have downloaded some custom rom for Lenovo a3300-GV but unable to flash through TWRP then you should follow these steps.
[NOTE: You must have Stock Rom installed ]
Instructions 1.Uninstall any other root app then restart your tablet
2.Install Super SU [latest version]
3.Download and install Flashfire
4.Put the custom rom in your external SDcard
5. If flashfire is not opening then set date to 10-october-2015
6.Select install And locate your rom (the .zip file)
7.After that select wipe option and select every thing is expect external sd and otg.
8.Then Hit the flash.:laugh:
9.A black screen or bootanimation may appear then a screen with bunch of text wil appear (it's only file system tree) don't panic.
10.Then a screen with flashfire name it will show everything that a recovery shows.
Afterward the tab will reboot and you will be able to see the bootanimatin of custom rom.:victory:
But if you face bootloop issue after reboot then go-to TWRP and factory reset it
Your Bootloop will be solved:fingers-crossed:
I tried this method so it is Bug Free procedure:laugh: