[Recovery]CTR(Carliv Touch Recovery) v2.5 for Maximus max908 [Android][Windows]

[Recovery]CTR(Carliv Touch Recovery) v2.5 for Maximus max908 [Android][Windows] - Android General

Is is my first post on xda
Hi Guys.
I've ported a CTR (Carliv Touch
Recovery) v2.5 recovery for
Maximus Max908 (4.2.2)
View attachment 3090679
View attachment 3090668
Features - Flash Zip From Both of your SD Card
Download Link:View attachment 3090677
Mobileuncle Tools Method (very easy):
Download the following:
a. MobileUncle Tools - Play Store Link:goo.gl/OncwbY
b.Downloa Recovery. img
2.Place the "recovery_6028.img" on the
root of your SD Card.
3. Launch Mobileuncle Tools and tap
"Recovery Update"
4. tap "recover_6028.img" under
"Recovery file in SDCard". If you
haven't placed the "recovery_
6028.img" on the root of your SDCard
at this point, you will not see and be
able to do this.
5. Tap "OK" to flash recovery.
Windows Method:-
-Make sure you have the drivers installed.
-Download and extract the zip file linked
above.
-Connect your phone to you PC via USB
cable, make sure USB --Debugging is
switched on.
-Double click on the "flash-
windows" (located inside the extracted
folder) file.
Done!
And don't forget to Tap THANKS here if u
think it's valuable.

Related

[Recovery] Lewa (TWRP) Touch Recovery For Micromax A90

Lewa (TWRP) touch recovery is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface, no more volume rocker or power buttons to mash.
Features:
-Graphical touchscreen interface with buttons and drag-to-scroll!
-Compressed backups that can save you up to 50% disk space
-Ability to choose which partitions to back up and which to restore
-Custom names for backups, rename and delete backups inside recovery
-Install Zip from SD card or internal storage
-Integrated Terminal Emulator
-Install queues allow you to install multiple zips in one go (e.g. CM9 zip together with gapps zip)
-Easy one-button cache & dalvik cache clearing after an installation
-Recovery settings are saved to the sdcard and persist through reboots
-File Manager that allows you to move, copy, delete and rename files and change their permissions
-Battery percentage indicator and clock (set your timezone in settings!)
-Power Off option
-Ability to partition SD Card with EXT3 or EXT4
-ADB support
-Detailed logfile
Screenshots:
View attachment 1529090 View attachment 1529091
View attachment 1529092 View attachment 1529093
View attachment 1529094 View attachment 1529095
View attachment 1529096 View attachment 1529097
View attachment 1529098 View attachment 1529099
View attachment 1529100
How to install Lewa (TWRP) touch recovery:
Method 1: Needs root
The first method is preferable for those who have root access on their Micromax A90. Those who do not have a rooted device should follow Method 2 instead
1. Download Lewa (TWRP) Recovery.zip and unzip/extract it. After extracting move both the files to the root directory of your SD card
2. Install mu7577.apk and run it. After that give the program root permissions if asked and tap Recovery Update
3. Select recovery.img from SD card then tap the ok button
Now you have Lewa (TWRP) Recovery. Congrats!
Method 2: SP Flash Tool method, root not required
1. Download and unzip/extract MTK6575 Drivers.zip on your Windows PC, just run InstallDriver.exe to install drivers
2. Download Lewa (TWRP) Recovery + Scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip, unzip/extract them
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted Lewa (TWRP) Recovery + Scatter folder and select MT6575_Android_scatter_emmc.txt file
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY
6. Now click on "Download". Warning message will occur, but ignore that and click Yes
7. You will see in the status bar below "Searching", now connect your phone (without battery inserted) via the USB cable
8. Wait for the process to finish and then you will get a window showing green circle
Congrats!, you have flashed Lewa (TWRP) Touch Recovery
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager
Booting into TWRP recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP recovery!
I have also attached the the Stock Recovery.zip
FAQ
-Can I use TWRP to restore my CWM backups?
No. The only way is to convert your uploads like this: flash CWM, restore a backup, flash TWRP, create new backup, repeat
Click to expand...
Click to collapse
-The clock shows the wrong time!
You need to set your timezone under Settings -> Time Zone
Click to expand...
Click to collapse
-How can I restore single apps (and/or their data) from a TWRP backup?
Use TitaniumBackup, it supports TWRP! In Titanium Backup, open up the menu and select "Extract from Nandroid backup...". It will list all your TWRP and CWM backups and allow you to restore as many apps and their data as you want.
Even though all TWRP backup files carry the extension .win, they are either tar archives or filesystem images. System, data, cache and .android_secure are backed up as tar archives or gnu-zipped tar archives if compression is enabled. You can rename those .win files to .tar (.tar.gz if compressed) and extract them like a regular archive
Click to expand...
Click to collapse

Itz Working On A90s dude ?

Sry buddy.. a90s has a different partition layout!
I have ported it according to a90
Sent from my A90 using xda premium

airjordanthehacker said:
Lewa (TWRP) touch recovery is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface, no more volume rocker or power buttons to mash.
Features:
-Graphical touchscreen interface with buttons and drag-to-scroll!
-Compressed backups that can save you up to 50% disk space
-Ability to choose which partitions to back up and which to restore
-Custom names for backups, rename and delete backups inside recovery
-Install Zip from SD card or internal storage
-Integrated Terminal Emulator
-Install queues allow you to install multiple zips in one go (e.g. CM9 zip together with gapps zip)
-Easy one-button cache & dalvik cache clearing after an installation
-Recovery settings are saved to the sdcard and persist through reboots
-File Manager that allows you to move, copy, delete and rename files and change their permissions
-Battery percentage indicator and clock (set your timezone in settings!)
-Power Off option
-Ability to partition SD Card with EXT3 or EXT4
-ADB support
-Detailed logfile
Screenshots:
View attachment 1529090 View attachment 1529091
View attachment 1529092 View attachment 1529093
View attachment 1529094 View attachment 1529095
View attachment 1529096 View attachment 1529097
View attachment 1529098 View attachment 1529099
View attachment 1529100
How to install Lewa (TWRP) touch recovery:
Method 1: Needs root
The first method is preferable for those who have root access on their Micromax A90. Those who do not have a rooted device should follow Method 2 instead
1. Download Lewa (TWRP) Recovery.zip and unzip/extract it. After extracting move both the files to the root directory of your SD card
2. Install mu7577.apk and run it. After that give the program root permissions if asked and tap Recovery Update
3. Select recovery.img from SD card then tap the ok button
Now you have Lewa (TWRP) Recovery. Congrats!
Method 2: SP Flash Tool method, root not required
1. Download and unzip/extract MTK6575 Drivers.zip on your Windows PC, just run InstallDriver.exe to install drivers
2. Download Lewa (TWRP) Recovery + Scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip, unzip/extract them
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted Lewa (TWRP) Recovery + Scatter folder and select MT6575_Android_scatter_emmc.txt file
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY
6. Now click on "Download". Warning message will occur, but ignore that and click Yes
7. You will see in the status bar below "Searching", now connect your phone (without battery inserted) via the USB cable
8. Wait for the process to finish and then you will get a window showing green circle
Congrats!, you have flashed Lewa (TWRP) Touch Recovery
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager
Booting into TWRP recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into TWRP recovery!
I have also attached the the Stock Recovery.zip
FAQ
-Can I use TWRP to restore my CWM backups?
-The clock shows the wrong time!
-How can I restore single apps (and/or their data) from a TWRP backup?
Click to expand...
Click to collapse
Do I have to un-install my existing CWM recovery first? - They would conflict with each other, wouldn't they?

Micromax a 45 - ALL THINGS ROOT !

I've decided to open this thread for development md mmx ninja a45 .
Rom dump :
http://www.mediafire.com/?gla8fgpwl0r0hvf
ROOTING (credits:rishu)
pre requisites *a45 drivers and *superoneclick
firstly dissable ur antivirus...
1)download drivers available at micromax's site
2)Connect your device on your PC and be sure that USB Debugging is enabled.
Your PC will ask on how will you install the driver, choose “Install from a specific location” then navigate to where you had downloaded earlier.
3)After drivers has been already installed, open super one click.
4)Click the “Root” button.
Then rooting will start automatically....
Installing CWM: (credits antonysabish)
Micromax A45 Clockworkmod
Recovery
Here's how to get Clockworkmod recovery
with SP Flash Tool:
1. Download SP Flash Tool.
2. Download MT6573_Android_scatter.txt.
3. Download a45recovery-cwm.zip and extract it.
4. Extract SPF Tool.zip and Run
Flash_tool.exe from there.
5. Click File->Open Scatter-loading file and
select the MT6573_Android_scatter.txt you
downloaded.
6. Now uncheck everything except
RECOVERY . Click on recovery and select
a45recovery-cwm.img you downloaded.
7. Now turn off your Micromax A45,
remove battery and put it back( DONT
switch it back on).
8. Press Download in the SP Flash Tool
window, then When the countdown starts,
connect your phone to PC.
9. After it's done, disconnect the phone,
remove battery and put it back. Boot the
phone into Recovery mode, You should
have Clockworkmod v5.8.1.9
download super one click : http://205.196.120.108/ll71hms5t67g/l291ej5damzoujk/SuperOneClickv2.3.3-ShortFuse.rar
Anyone interested please join

[RECOVERY][DEV] Unofficial CWM Recovery v6.0.0.3 for Micromax A25

ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...

not working
root method is not working......
just check dude
sp flash method is working...
hats off gor u r work dude...
in gingerbread we dont have sd-extn so its not mounting...
lets begin for custom rom development

karthiksitian said:
root method is not working......
just check dude
Click to expand...
Click to collapse
okk I will double check it. In mean time you can try non-rooted method, I will definitely work...

d you have the original recovery?

davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
still sd-ext is not working

karthiksitian said:
still sd-ext is not working
Click to expand...
Click to collapse
what's the error you are getting in CWM while mounting sd-ext or taking nandroid backup...
Have you installed link2sd for mount script??

davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
see #1 post...

When I tried to flash cmw so toll shows a Eboot error 16008 help

worked
aman.droid said:
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
Click to expand...
Click to collapse
now i can control my phone
rooted and istall cwm

I'm getting the following error. How can I get it resolved?
"[Android] Partition Size Changed"
Update:
I finally got my device bricked by replacing the content in the scatter file to the following text. Don't try this!
{
}
RECOVERY 0xFC0000
{
}
Click to expand...
Click to collapse
Is there anybody who got a Micromax A25 unbricked?

pretty easy...
mail me @ [email protected]
i will tell u in detailed....

need Stock rom of Micromax Smarty a25
vasukinv said:
I'm getting the following error. How can I get it resolved?
"[Android] Partition Size Changed"
Update:
I finally got my device bricked by replacing the content in the scatter file to the following text. Don't try this!
Is there anybody who got a Micromax A25 unbricked?
Click to expand...
Click to collapse
Any one please could you upload Stock rom of mmx a25,,, i flashed another rom in this and got my device bricked,,,

aman.droid said:
ClockworkMod Recovery
v6.0.0.3
Micromax A25
Download Stock Recovery + Scatter file
Download CWM + Scatter file
12-25-12 UPDATE 1: (Fixed sd-ext mount & backup)
Download CWM + Scatter file(Update 1)
Download SPFlashTool pass:mastermind1024 credit: mastermind1024
Download USB VCOM Driver pass:mastermind1024 credit: mastermind1024
Download MobileUncle Tools apk
How to install CWM recovery:
For rooted/non-rooted A25:
1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_Update1.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Voila!!! Your CWMR is live...
For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Back to Stock Recovery:
1. Extract A25_stock_recovery.zip in a seperate folder.
2. Follow same procedure as for non-rooted A25 but select scatter file from the above extracted folder.
Working:
Reboot
wipe (data and cache)
data mount
system mount
cache mount
nandroid backup (including backup of boot(aka kernel), recovery)
nandroid restore (haven't tested)
USB Storage Mount
sd-ext mount & backup
Not Working:
sd-ext mount
else haven't tested
Bugs:
home button works as UP button
on selecting Reboot System now, touch back button to restart (don't select yes in the list)
Declaimer: I am not responsible for any bricked devices(but bricking occurs only if you play dumb with your device).
Credits: yuweng --> for compiling CWMR Mastermind1024 --> for flashtool and scatter file.
Press Thanks if I have ever helped you...
Click to expand...
Click to collapse
i think i have got semi bricked phone ....micromax a25
it is detected by computer and make us port..
as the steps mentioned by u i launch flash tool ----> load scatter file ---->then disable da download all.--->
then it gives me error that recovery image is not in valid da format...
do iam doing something wrong...

thanxx
thanxx,sp flash tool is workin and that mobile uncle hangs and doesn't work.
1.any custom rom for micromax a25
2.any supportable cwm recovery for micromax a100

davidheis said:
d you have the original recovery?
Click to expand...
Click to collapse
the recovery is likely to be original ,but works great b'coz of this i flashed micromax a52 custom roms and it worked for me

Please help!
Root method is not working. I am unable to install cwm through mobileuncle tools. :crying:

install it via sp flash tool
Sent from my A25 using Tapatalk 2

no one replys here
Press thanx if liked !
Click to expand...
Click to collapse

Can any one help?
my device is also semi brocked now i want to flash stock rom but sp ft gives me BROM error
so can any one tell me how to put this phone in bootrom mode?

How to install CWM

Post Procedure Of Installing CWM.
Sent from my Micromax A88 using xda app-developers app

[email protected] said:
Post Procedure Of Installing CWM.
Sent from my Micromax A88 using xda app-developers app
Click to expand...
Click to collapse
CHANGELOG SINCE 6.0.2.8
- Blocked cached Google Music files
from nandroid
- Fix segfault with dead symlinks
- Store CWM Recovery Version
Number
- Remove HAVE_SELINUX guards
- Add external_sd and efs to /etc/
fstab generated by recovery
- Ability to save nandroid backup log
- added extended courier font
- allow sideload to be triggered via /cache/recovery command
- Allow cancelation of adb sideload.
- New Wil Wheaton Recovery enhancements.
- Lots of code cleanup
- Other Bug fixes and performance enhancements.
For rooted/non-rooted A110:
1. Download SPFlashTool and extract it.
2. Download the recovery.img
3. Run Flash_tool.exe.
4. Load scatter file extracted from stock rom.
WARNING: Don't put tick "PRELOADER" & "DSP_BL" (those red ones)...
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Here you are in CWM !!...
For Rooted A110:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img downloaded to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Now you are in CWM Recovery.
for Sptools and stock rom go to:
http://forum.xda-developers.com/showthread.php?t=2167244
Download the recovery attached:

[Resolved] How to root Vodafone Smart Tab 7 (Tablet) VFD 1100 (Solved)

Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100

DevOpsXDA said:
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
Click to expand...
Click to collapse
Hi, i can use this way Also for Vodafone Smart Tab 10?

Database Info

welcome