Database Info

Can't boot in recovery mode galaxy s duos gt-s7562

hello! I bought a galaxy s duos gt-s7562 from ebay with android 4.2.2, I tried to install cwm with this method
STEPS
Step 1 :- Download ES File Explorer and Rooting kit and Extract it
Step 2 :- Install RootMaster1.0.7eng.apk and Press Root privileges to Root the Device temporary.
Step 3 :- Open ES File Explorer In Settings Under tools Enable "Root Explorer" that will give permission to re-write.
Step 4 :- In ES File Explorer in setting Under Local select " / Local " then open the folder "System" then "etc"
/Device/System/etc
Step 5 :- Search for the file "install.recovery.sh" and rename it to "install.recovery.sh.bak" This is done to avoid overwriting of stock recovery.
Step 6 :- Now Install "Flashfy.apk" and select "Flash Recovery" and browse to the extracted rooting kit and open CWM Recovery and select "recovery.img" it will flash and ask for reboot into CWM Recovery .
You can also install stock recovery this way too just choose the Stock recovery file
Step 7 :- In CWM Recovery select the option "Install Zip from SD card" and browse to the rooting kit and select "CWM-Superuser-3.1.3.zip" that will install a permanent Superuser [Root]
Step 8 :- Uninstall Flashfy and Root Master [Optional]
and now I can't to go in recovery or downloadable mode. what I can do? thanks

Have you tried?
volume down + Power + home
Volume up = recovery mode
Volume down = odin mode or download mode..
If you can go in download mode... Flash cwm or stock recovery with Odin
Hit thank button if this post helped you

First of all
Galaxy S duos GT7562 is running on Android 4.0.4 coz i own this device..
Here is the simple rooting and CWM installing method
1) Search "Poot.apk" in google and install it
2) Open the app, it will prompt you to Playstore to download Ministro II, download,
3) After downloading Ministro II, go back and click on "Click here to root"
( it will root your device permanently and will install Superuser)
4) Reboot
For CWM,
1) download and install "Mobile Uncle Tool" from playstore or from anywhere
2) locate to "recovery.img" stored on your SD card, select it
3) It will install the recovery image file and your phone will reboot
I hope this will help you

TWRP 3.0.2-0 Samsung Galaxy Grand Neo (GT-I9060)

TWRP 3.0.2-0 is out now for Samsung Galaxy Grand Neo (GT-I9060)
Today we are going to look at two methods of installing TWRP .These methods will work on any android device(if you use odin method then only samsung devices will work). If you are new to Flashing then this tutorial is for you.
Note: Recovery files in this guide only works on GT-I9060.
Method list
1. Odin Method
2. Terminal Emulator method (no computer method)
Method 1 : Odin Method
Files we required for Method 1
1. TWRP 3.0.2-0 (.tar.md5)
2. Odin 3.10.7 (you can also use any old version too).
3. Samsung USB drivers.
Links for downloading Method 1 files
1. TWRP 3.0.2-0 (.tar.md5) --> Download
2. Odin 3.10.7 Download
3. Samsung USB drivers --> Download
Let's Start and follow steps
If you know how to use odin you can go straight to step 6.
Preparing Computer
Step 1 :- Extract Samsung USB drivers to any folder in your pc and install it.
Step 2 :- Now reboot your computer.
Step 3 :- Extract Odin 3.10.7 to any folder in your pc and open extracted folder.
Step 4 :- Right click on file named odin3 v3.10.7 and click on "Run as administrator" then hit yes.
Step 5 :- Now click on button called "AP".
Step 6 :- Navigate to the directory where you have downloaded the "recovery.tar.md5" and double click on that.
Step 7 :- Goto the "Option" in odin and uncheck "Auto reboot".
Preparing Device
Step 8 :- Switch off your device and enter into Download mode by pressing and holding Volume down + Home + Power keys simultaneously and leave keys only when you feel vibration.
Step 9 :- Press Volume up key to continue.
Step 10 :- Now connect your device to computer using USB cable.
Step 11 :- And hit start button in odin to start flashing (Wait till it flashes).
Step 12 :- When you see "Reset" in left top box remove your battery and boot in recovery by pressing Volume up + Home + Power key simultaneously and leave keys only when you feel vibration.
Thats it now you have successfully booted in new recovery.
Method 2 : Terminal Emulator Method
Files we required for Method 2
1. TWRP 3.0.2-0 (.img)
2. Terminal Emulator.
Links for downloading Method 2 files
1. TWRP 3.0.2-0 (.img) --> Download
2. Terminal Emulator --> Download
Note : You should be rooted if you want to use this method. Check guide here
Step 1 :- First of all copy and paste "recovery.img" in your root directory (means in internal sdcard)
Step 2 :- Open app named "Terminal Emulator" in your android device.
Step 3 :- Now type "su" in terminal hit enter and grant root access.
Step 4 :- Now type command written below carefully and press enter.
Code:
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
Note:Mount points may differ in different devices here mount point is "mmcblk0p10".
Step 5 :- Now type "exit" and hit enter and again type "exit" in order to close Terminal Emulator.
Step 6 :- Now press and hold Volume up + Home + Power simultaneously and leave keys only when you feel vibration.
Thats it now you have successfully booted in new recovery.
At first boot of TWRP its will ask " keep system read only" . Just swipe no need to change anything.
XDA:DevDB Information
TWRP 3.0.2-0 Samsung Galaxy Grand Neo (GT-I9060), Kernel for all devices (see above for details)
Contributors
made_in_androland, androidlover5842
Source Code: https://github.com/Grace5921/twrp_device_baffinlite
Kernel Special Features: Selinux support enabled
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-11-30
Created 2016-11-30
Last Updated 2016-11-30

Excellent job man.

not booting into twrp. again entered download mode. i followed odin method
EDIT - WORKED MAN THANKS. I WAS PRESSING WRONG KEYS

Now how to Root the Device

RohitSole said:
Now how to Root the Device
Click to expand...
Click to collapse
Have you installed the TWRP recovery?

galaxy grand neo I9060 rom can you share

RohitSole said:
Now how to Root the Device
Click to expand...
Click to collapse
Install supersu

waited and waited, no Reset on top left, just "Pass"

Hello,
I know this a year old thread but will this guide work for the Grand Neo GT-i9168i (The one that Samsung released to the Chinese market)? Is the hardware in the phone different enough to make this not work?

I cant mount cache. Is that normal?

Hello
i try to download LineageOS on Galaxy Grand Neo Plus
I success in step 1 using cmd to run download Mode & copy (recovery.tar.md5) By Odin to phone
but the problem i cant going to (Recovry mode) to complete upgrade to LineageOS
any solution ? ♥

Install TWRP & Root Your Symphony i50

Requirements For Root Symphony i50:
1. Windows PC
2. Mobile
3. installment of usb/vcom drivers
4. SuperSU
Disclaimer:
I am not responsible for bricked devices.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Download Require Files - Here>>
And Extract
Step 1 : First install the vcom & usb drivers
Step 2: Copy "SuperSU.zip" in your phone memory.
Step 2 : Now open sp flash tools & select scatter file "MT6580_Android_scatter.txt" with recovery.img.
Step 3 : Remove battery From Phone, Click "Download" on sp flash tool & Connect USB With Cable with PC,
Wait till Successfull.
Step 4 : Now connect battery & press on Vollum Up key and power key at same time.
Step 5 : Press on install button and Select "SuperSU.zip"
Step 6: Now Swipe on install Button.
Step 7 : After successfully instaling supersu, reboot the system.
A Video example (its for i10) - https://www.youtube.com/watch?v=A-hbCWRHaYw&feature=youtu.be
Hit Thanks if you success.

It worked now my i50 is rooted now but i need a cm14 custom rom for it can you help? Please

I need a Symphony i18 twrp or root
Place help us

Need CWM recovery zip file for Symphony Z15
My device name is Symphony Z15 I need CWM recovery zip file,plz help.

[Guide] How to Root Leagoo Leagoo KIICAA Mix

Guys This is the Guide to Root Leagoo KIICAA Mix-
Download Require Files-
1. Download SP flash tools https://androidfilehost.com/?fid=745425885120763929
2. V Com Driver Require https://androidfilehost.com/?fid=817550096634801170
3. twrp Require https://romprovider.com/2017/10/t-root-leagoo-kiicaa-mix/
4. Supersu Require https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Instructions-
1. Install VCom Driver
2. Run SP flash tools and Load scatter from Recovery folder
3. check recovery only and under recovery section load twrp.img
4. click Download, and connect switched off Phone to PC
5. wait for success. Done twrp installed.
6. reboot to twrp by holding power and volume+ button
7. create a nandroid backup
8. flash supersu.zip, done successfully Rooted.
i hope You will get success.

which button(s) shoud i press on the installer?
when i press on the installer i have a lot of buttons(install miracle,install spd etc)
which i shoud i press?
and will it work on windows 7?
thanks

Hey there!
I would like to root this using a linux desktop, could you explain the process in more detail which tool is responsible for which function so I could try to adapt the process to function without a windows desktop?

kaefert said:
Hey there!
I would like to root this using a linux desktop, could you explain the process in more detail which tool is responsible for which function so I could try to adapt the process to function without a windows desktop?
Click to expand...
Click to collapse
Hi,
if you are running a debian based distro, you have first to install adb and fastboot from manager or using apt-get.
2/ check if file /etc/udev/rules.d/51-android.rules is present and contains correct description of your phone idVendor and idProduct
if not run lsusb and add the following line
Code:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="your idVendor", ATTRS{idProduct}=="your idProduct", MODE="0666" GROUP="androiddev", SYMLINK+="android%n"
3/ service udev restart
4/ unplug and plug again your phone and run adb devices, it will show a long number and letters with UNAUTHORIZED. that's OK
5/enter fastboot mode and unlock your bootloader with : fastboot oem unlock
6/ enter fastboot mode when booting your phone and type this: fastboot flash recovery recovery.img
( you have to rename twrp.img to recovery.img)
that's done you can now boot to twrp and install su.

hey there avrmge!
thanks for the reply, but I already sent the device back to the seller, it was too far below my expectations.

kaefert said:
hey there avrmge!
thanks for the reply, but I already sent the device back to the seller, it was too far below my expectations.
Click to expand...
Click to collapse
Hello,
the procedure above generally works with any other android device,
i think the main problem with this phone is lack of notification led, no 3.5mm jack and sometimes battery drains too fast. except that, it is as normal as other models in same segment. what were your expectations ?

well, I was disappointed with the problems you mentioned and also:
-) no light sensor ( --> no automatic brightness)
-) accelerometer has only 2 axis working
-) no gyroscope
-) no proximity sensor

boot loop after root ! Ur guide to the hell

mark332 said:
Guys This is the Guide to Root Leagoo KIICAA Mix-
Download Require Files-
1. Download SP flash tools https://androidfilehost.com/?fid=745425885120763929
2. V Com Driver Require https://androidfilehost.com/?fid=817550096634801170
3. twrp Require https://romprovider.com/2017/10/t-root-leagoo-kiicaa-mix/
4. Supersu Require https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Instructions-
1. Install VCom Driver
2. Run SP flash tools and Load scatter from Recovery folder
3. check recovery only and under recovery section load twrp.img
4. click Download, and connect switched off Phone to PC
5. wait for success. Done twrp installed.
6. reboot to twrp by holding power and volume+ button
7. create a nandroid backup
8. flash supersu.zip, done successfully Rooted.
i hope You will get success.
Click to expand...
Click to collapse
I need help, when i try to install the vcom drivers, i get an error. i can,t post image so...

can you add video?

how to imei change?

Maybe it's not the place but is there someone who get complain on that the speaker is so low can I increase it and make it louder cause people say we can't here you please help

mark332 said:
Guys This is the Guide to Root Leagoo KIICAA Mix-
Download Require Files-
1. Download SP flash tools https://androidfilehost.com/?fid=745425885120763929
2. V Com Driver Require https://androidfilehost.com/?fid=817550096634801170
3. twrp Require https://romprovider.com/2017/10/t-root-leagoo-kiicaa-mix/
4. Supersu Require https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Instructions-
1. Install VCom Driver
2. Run SP flash tools and Load scatter from Recovery folder
3. check recovery only and under recovery section load twrp.img
4. click Download, and connect switched off Phone to PC
5. wait for success. Done twrp installed.
6. reboot to twrp by holding power and volume+ button
7. create a nandroid backup
8. flash supersu.zip, done successfully Rooted.
i hope You will get success.
Click to expand...
Click to collapse
I am having problems with twrp when installing and starting in recovery mode it freezes me forcing to restart the device

mark332 said:
Guys This is the Guide to Root Leagoo KIICAA Mix-
Download Require Files-
1. Download SP flash tools https://androidfilehost.com/?fid=745425885120763929
2. V Com Driver Require https://androidfilehost.com/?fid=817550096634801170
3. twrp Require https://romprovider.com/2017/10/t-root-leagoo-kiicaa-mix/
4. Supersu Require https://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Instructions-
1. Install VCom Driver
2. Run SP flash tools and Load scatter from Recovery folder
3. check recovery only and under recovery section load twrp.img
4. click Download, and connect switched off Phone to PC
5. wait for success. Done twrp installed.
6. reboot to twrp by holding power and volume+ button
7. create a nandroid backup
8. flash supersu.zip, done successfully Rooted.
i hope You will get success.
Click to expand...
Click to collapse
when i open twrp, it asks for a password. my phone doesn't have any password, and i need it to install a custom rom. is there someone able to help me? bc i really can't understand
*im assuming that i have to unlock oem, but is it really necessary?

Ciao, ho installato la twrp tutto a posto, poi ho messo pixel 1.2 rom, ma audio in telefonata pessimo mi serve un aiuto per migliorare grazie

I installed a proper twrp (fastboot flash)
Leagoo KIICAA Mix 3.1
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

[HOWTO] Root and flash rom for Alcatel Onetouch Idol 3 5.5 (6045Y) with MM6.0.1

Tutorial to root and flash rom for Alcatel Onetouch Idol 3 5.5 (6045Y) with MM 6.0.1
Benefits
- remove bloatware from Alcatel/TCL
- clean up/speed up the phone
Context
Since MM 6.0.1, fastboot commands are blocked. There are 2 solutions to root and install a new rom for 6045Y. Downgrade to LP 5.0.2 or use a great tool created by DeckerSu with the following tutorial:
Step 1: Prepare the phone
1.0 Backup your phone (photos, contacts...)
1.1.Access the developer mode by clicking 7 times on About Phone
1.2 Enable the 2 following items in Developer options and validate when necessary :
- USB debugging
- OEM unlocking
Step 2: Install TWRP
2.1. Download the adb fastboot package and install it
2.2 Install Alcatel drivers by downloading Mobile_Upgrade_Q. Mobile_Upgrade_Q_5.1.8 is available and that what I used but could not find the link.
2.2 Download Alcatel Flasher from here, install it, launch it as admin
2.3 Download TWRP
2.4 Put your phone in download mode. To do this, connect the powered off phone to PC via USB-cable and hold Volume Up + Volume Down + Power buttons
2.5 Follow this how to from steps 5 to 10.
2.6 Change the path of recovery to the TWRP file previously downloaded and click Write, then No. Reboot into recovery by holding Volume Up button and pressing Power
2.7 (optional) Wipe cache/dalvik if bootloop
Step 3: Install SU
3.1 download SU zip file (Recovery flashable)
3.2 transfer the file to the phone, reboot the phone into recovery, click install in TWRP, select the SU file, install, wipe cache/dalvik, reboot
Step 4: flash ROM
4.1 download the Resurrection Remix rom from the dedicated XDA thread
4.2 transfer the file to your phone, reboot your phone on recovery, wipe to factory reset in TWRP, click install in TWRP, select the downloaded file, install, wipe cache/dalvik, reboot
Step 5: install Gapps
5.1 download the arm64 7.1 Pico from OpenGApps
5.2 transfer the file to your phone, reboot your phone on recovery, click install in TWRP, select the downloaded file, install it and reboot
Done ! You can now download whatever applications you need via Google Play
Enjoy !