hi Today I found a guide in arabic site so would like to share it with you as i tried it in kitkat and lollipop and it worked with knox container and root both working and knox counter still 0.
previously i used the KNOX NOTE 3 file to reset the KNOX counter but i face problemes
here is the original link :
http://www.android4iraq.com/?p=9575
GUIDE :
You may get the yellow traingle with pc and mobile icon sign, dont worry and consider it a DOWNLOAD MODE and continue the steps
In Every Time you Use odin , be sure to remove the auto reboot check mark
Kitkat :
1- Flash Knox Note 3 in PDA with Auto Reboot NOT checked in odin you may get fail in odin , dont worry and get into download mode again.
2-Flash Kitkat Bootloader -Named N900_NF3_SR_BL.tar.md5- in PDA tab and restart your phone LINK
Lollipop
1- Flash the kitkat bootlaoder
2-Flash Knox Note 3
2-Flash Lollipop Bootloader -Named Bootloader 5- in Bootloader tab
3-Flash Stock recovery
Credit:
i Dont know the source of Knox Note 3 file please guide me to consider it in the post.
So, basically this is solution if knox is triggered? This solution reset knox?
Interesting..anyone tried this?
kronos1 said:
So, basically this is solution if knox is triggered? This solution reset knox?
Click to expand...
Click to collapse
i tried it and worked 100% with knox container functional with root
Sounds promising keep us updated
Verstuurd vanaf mijn SM-N9005 met Tapatalk
KNOX NOTE 3.tar is corrupted and get a message saying unexpected end of archive when opening in winrar. Maybe this was done on purpose as to erase the knox bit? But I'm still kind of nervous of getting a brick by flashing a corrupted file.
Is this only for international Note 3? I am on the US Sprint note 3.
Sent from my SM-G900P using Tapatalk
Ooh, thx!
regarding knox note 3 ..u dont need to extract it..just flash.
i checked the file its sound and not corrupted.
this is only for exynos version n900
Sent from my SM-N900 using XDA Premium 4 mobile app
mostmaz899 said:
i tried it and worked 100% with knox container functional with root
Click to expand...
Click to collapse
You reset knox on lollipop leak beta NL4?
anyone else found this working? it i interesting that there was a sizeable pot to have knox back to 0x0, and here comes the solution!
yes if you want i will sent a screen shot today when get back from work
Someone tested it on Lillipop leak (n900)?
fernandocole said:
Someone tested it on Lillipop leak (n900)?
Click to expand...
Click to collapse
i tested on the kitkat and the leaked lollipop and worked
Sent from my SM-N900 using XDA Premium 4 mobile app
mostmaz899 said:
i tested on the kitkat and the leaked lollipop and worked
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Great!! Can you upload some screenshots?
ok ill upload some screen shots from the lollpop bootloader with the knox counter today after geting back from work
Sent from my SM-N900 using XDA Premium 4 mobile app
Thanks it is working as I got it done :good:. Was on "alexega_4.4.2_Edition_XXUENJ1" and then updated to "N900_Lollipop_DrKetan_Custom_ROM_L15". After using Lollipop for 2-3 days just restored through nandroid backup (TWRP) and was with Lollipop BL. First pic is after the Knox reset and second is once I flashed original "N900XXUENH1_N900OJVENG2_N900XXUENG1_HOME" ROM from Samsung :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It works fine. Knox counter is reset to 0
I am currently using stock version of kitkat and had a Knox counter as 1.
My phone was not rooted when I tried these steps.
First flash step would stop half way through ,however ignore and go ahead with Step 2 and it works like charm. Now my knox counter is set to 0.
Do they all get flashed as bootloaders or what?
Is this for the N9005?
Related
Well, I read something about a flash counter, and i searched around a bit and found this
It's a counter that tells how much times you've flashed custom stuff. If you have a counter different from zero it means that your warranty is voided. Anyway, you can get a usb jig from ebay to reset the counter to zero in case you need to get it to zero. So you shouldn't worry too much about it.
Click to expand...
Click to collapse
It counts the number if times you flash non-official firmware or kernel etc.
It increases only when you flash a non-official firmware or kernel etc.
Click to expand...
Click to collapse
And about how to check?
Just go to download mode.
(VOLUME-DOWN + HOME + POWER while the phone is off)
Click to expand...
Click to collapse
But I didnt see anything in the download mode which would tell me the flash counter?
Anyone tried to check on our phone or anyone knows how to find it?
There is no flash counter for sgsl.. the sgs2 and the note has it..
Edit: this is what it looks like (through download mode)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9100 using xda premium
ephraim033 said:
There is no flash counter for sgsl.. the sgs2 and the note has it..
Edit: this is what it looks like (through download mode)
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
That's great for us!
Oh, I see.
Ohk Thanks.
Well, a few days ago sgs2 users with no usb jig to reset the counter (like me ) rejoiced because chainfire made an app that removes the triangle (result of flashing un official kernel) and sets the counter back to zero (but requires and upgrade to ics first). But once you removed the flash counter, when upgrading to another ROM through mobile odin or CWM, the flash counter won't increase. It only increases if you flash through odin (PC version)
Sent from my GT-I9100 using xda premium
ephraim033 said:
Well, a few days ago sgs2 users with no usb jig to reset the counter (like me ) rejoiced because chainfire made an app that removes the triangle (result of flashing un official kernel) and sets the counter back to zero (but requires and upgrade to ics first). But once you removed the flash counter, when upgrading to another ROM through mobile odin or CWM, the flash counter won't increase. It only increases if you flash through odin (PC version)
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Well, that's really good that there is a way to reset the counter.
I was getting a bit edgy about it, since if there would be such a counter, the service centre would get to know about the flashes and modding and warranty would get void. But since there is no counter in our phone, no worries for now.
hi.
in this Thread i tell you that how root your phone by Kingo Android ROOT:fingers-crossed:
i tested it in my tab and it is works well , but images are for xperia p !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:
1.download app and install it on your windows.
2.connect to internet and run app.
3.turn on usb debugging and unknown sources , then connect your phone to the pc.
4.after downloading and installing driver , you see this:
5.press root buttom.
6.after rooting you see this:
if you want to UnRoot press remove root.
finish.
and knox gets triggerd :/
its only for those people who do not care about knox
This will not work on n9005 note 3 firmware 4.4.2.I already tried.In normal mode doesn't trip knox but don't work give error and ask you to put the phone in download mode but that trip knox.Sony Xperia doesn't have knox or bootloaders and other thing like note 3 that's why this work for it.
I think it works without tripping knox for CANADIAN MJ4 users.
will this work on 4.3 without tripping knox? will this unroot 4.4.2?
thx
nycdave said:
will this work on 4.3 without tripping knox? will this unroot 4.4.2?
thx
Click to expand...
Click to collapse
Not on 9005
orly_mihai said:
This will not work on n9005 note 3 firmware 4.4.2.I already tried.In normal mode doesn't trip knox but don't work give error and ask you to put the phone in download mode but that trip knox.Sony Xperia doesn't have knox or bootloaders and other thing like note 3 that's why this work for it.
Click to expand...
Click to collapse
Are you sure the download mode trips knox?
bunny0007 said:
Not on 9005
Click to expand...
Click to collapse
Hi there,
Did use it from the first moment on, without tripping Knox.
I am on 4.3, XXUBMJ3 N9005 type GN3.
Have rooted and unrooted several times without any problems.
I am still waiting to upgrade to 4.4.x, since I don't want the bootloader issues and am very happy with my rooted 4.3.
Regards,
Did any one try it on the Indian Note 3 ( SM N - 900) 4.4.2 rom. Does it trip the knox warranty?
siriom said:
Are you sure the download mode trips knox?
Click to expand...
Click to collapse
Download mode never trips knox, I think the user was referring to using the above root method which will flash something which requires the phone to be in download mode.
Sent from my SM-N9005
---------- Post added at 11:18 PM ---------- Previous post was at 11:12 PM ----------
Dioky said:
Hi there,
Did use it from the first moment on, without tripping Knox.
I am on 4.3, XXUBMJ3 N9005 type GN3.
Have rooted and unrooted several times without any problems.
I am still waiting to upgrade to 4.4.x, since I don't want the bootloader issues and am very happy with my rooted 4.3.
Regards,
Click to expand...
Click to collapse
I upgraded from 4.3 to 4.4.2 using mobile Odin pro 4. I rooted using De la vega method when I was on mj1
Sent from my SM-N9005
If you try with kingo will fail in normal mode and then it ask you to try in download mode and there say this may void your waranty.
drrkgupta said:
Did any one try it on the Indian Note 3 ( SM N - 900) 4.4.2 rom. Does it trip the knox warranty?
Click to expand...
Click to collapse
I just checked and Kingo gave warning that it will trip knox and void warranty. Kingo tried to root by first flashing custom recovery so I decided not to go ahead. Will wait for someone to develop rooting Indian SM N900 running 4.4.2 without warranty void
Morning all, there were about 4 open threads where I could have added this but I thought of the significance it deserved a new thread.
I will reference all the threads I have used to obtain the info from at the end for reference.
So, I was running a pre rooted stock 4.2.2 MH1 without any knox.
Decided to go to 4.4.2 and followed the knox free method for nc5 with mobile odin. It flashed the rom but wouldn't do the bootloader via normal odin, complained that it didnt recognise the device.
So though what the heck, go staight to the latest pre rooted c9 firmware and had a thought. I was still rooted at this point and the phone ran with 4.4.2 nc5 with the mh1 boot loader. I stripped the boot loader out of the downloaded prerooted nc9 rom, flashed that with normal odin, then flashed the whole rom again with bootloader over the top.
I now have official status. No knox flags and root.
[
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In download mode i see the following:
odin mode
product name: gt-i9505
current binary: samsung official
system status: custom
knox kernal lock: 0x0
knox warranty void: 0x0
csbconfig lsb: 0x30
write protection: enable
emmc burst mode: enabled
Perhaps there is something of significance here for others or maybe someone can point out what I've missed or done wrong.
Thanks for the following threads for their info and inspiration (thanks also given)
shayind4 for http://forum.xda-developers.com/showthread.php?t=2719434
DjeMBeY for http://forum.xda-developers.com/showthread.php?t=2250824
Sent from my GT-I9505 using Tapatalk 2
what about i9500
No idea as I dont have one. Would be a fairly safe test imo to try though.
Sent from my GT-I9505 using Tapatalk 2
Is it applicable for my s4 GT-I9505 with built number KOT49H.I9505XXUFNBE??thank you very much...
apbms1 said:
.......
Click to expand...
Click to collapse
I am sure that you are very happy for your success. I am pretty sure that you will have many friends soon. I am almost certain that your phone's IMEI number will be soon used for unlocking some stolen phone somewhere by IMEI cloning.
What is the base of my feeling?
Well, you have provided both, your own mobile number and IMEI number on the screenshots.
Are you sure that you know what are you doing?
The number is wrong
Sent from my GT-I9505 using Tapatalk 2
apbms1 said:
The number is wrong
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
IMEI?? consequences of disclosure: example here
ROM stock firmware Samsung Galaxy S7 SM-G935F update
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Deodex Marshmallow in Galaxy S7 Edge
How to deodex Android 6.0 on Galaxy S7 Edge ?
i have 5 files in my package which four should i use? there are two csc one has home and the other without home in label
ashdstin said:
i have 5 files in my package which four should i use? there are two csc one has home and the other without home in label
Click to expand...
Click to collapse
Use that one without home in label. And you don't need pit file, cause it is compiled inside csc file.
SM-G935F powered by Echoe
Coul you upload this
Version: G935FXXU1APC8/G935FOXX1APB1/G935FXXU1APBD/G935FXXU1APC8
OS: Marshmallow(Android 6.0.1)
I have downloaded the Vodafone firmware for s7 edge. The problem is that it has MultiLanguage CSC. I need italian setup but at the start it is in deutsch Language and so I can not use Volte with Vodafone Italy.
Dumb question probably, but is all this legit? Root and everything? I hear ROM development isn't as great on the Exynos chips, but coming from having an only rooted ATT S4, the international S7 would be real nice.
Guys what of the Samsung bloatware can I remove with titanium safely? Anyone knows?
Sent from my SM-G935F using Tapatalk
does anyone know if this variant works with verizon??
stang5litre said:
does anyone know if this variant works with verizon??
Click to expand...
Click to collapse
Sure doesn't.
lowrider82 said:
Guys what of the Samsung bloatware can I remove with titanium safely? Anyone knows?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
You can remove ALL the Samsung and Google Bloatware from your handset safely... Cleared 500+ MB cleaning mine off after rooting using Uninstaller (root)
Sent from my SM-G935F using XDA-Developers mobile app
hy tank to all
after i put frimwere and download TWRP CF-Auto-Root SuperSU 2.70.zip
how can i use this could some one pute a easy guide o link pls so much
Be warned, downloading the UK firmware from that russian site installed a load of malware on my pc. I've just finished removing it, pain in the ass.
Whenever I try to flash TWRP, my phone says that it's FRP protected...
Odin fails due to that...
How to fix this? I google'd it and only guys fix this for money :/
EDIT:
FIXED IT! Go to developer settings -> enable DISABLE OEM LOCK
tuk1maar said:
Whenever I try to flash TWRP, my phone says that it's FRP protected...
Odin fails due to that...
How to fix this? I google'd it and only guys fix this for money :/
Click to expand...
Click to collapse
Enable OEM Unlock from developer options.
Can i Use this Root Method for SM-G935FD
Do not download anything from this crappy site,you'll get a ton of malware!!!!!
good job
---------- Post added at 09:59 PM ---------- Previous post was at 09:47 PM ----------
sriszone said:
Can i Use this Root Method for SM-G935FD
Click to expand...
Click to collapse
same question
SimplyCity said:
Use that one without home in label. And you don't need pit file, cause it is compiled inside csc file.
SM-G935F powered by Echoe
Click to expand...
Click to collapse
Btw, do you know what's the difference?
Raphy511 said:
Btw, do you know what's the difference?
Click to expand...
Click to collapse
Yes, CSC home WILL NOT format your data. That one without HOME will
Just installed this morning.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Poxie said:
Just installed this morning.View attachment 4109874
Click to expand...
Click to collapse
:laugh: I received this morning and is downloading
I installed earlier and was able to get recovery and root, but not to long ago I was debloating and I guess deleted some knox files and got stuck on a boot loop :/, now I have to flash all the way back to PI3 and update one by one to QB1, which i'm hoping works or else i'm gonna be out of a phone until a flashable stock rom releases.
I updated and have root and recovery.
Does anyone have the odin stock firmware yet? I also tried to download via Sam Firm app and get the same error. I also talked to Sprint and they basically wont give me the ota as of now.
Why it doesn't show at websites such as live.samsung-updates.com, then?
live.samsung-updates.com/index.php?device=SM-G920P
paulovlobato said:
Why it doesn't show at websites such as live.samsung-updates.com, then?
live.samsung-updates.com/index.php?device=SM-G920P
Click to expand...
Click to collapse
Nervermind, I just got it.
Just a FYI, you guys won't be able to get it through SamFirm, neither download to flash it.
The Nougat isn't available in any online service that I could find. It's OTA, only. I had to unroot my G925P in order to get the OTA update.
Installing right now...
rsktkr1 said:
I updated and have root and recovery.
Click to expand...
Click to collapse
HOW DID U GET ROOT AMD RECOVERY
Sent from my SM-G925P using Tapatalk
flash the latest twrp via odin. Then root with SuperSU for nougat by flashing the SupersU with twrp.
Which super su
Sent from my SM-G925P using Tapatalk
https://www.dropbox.com/s/yk71179z29zo87h/N920_Nougat_Root_SuperSU_No_kernel_included.zip?dl=0
Conative719 here, I flashed that via twrp but still in a bootloop haven't been able to bring it back after I flashed twrp I've tried my recent stock zip through Odin and nothing is there a nougat file on sammobile yet or is my phone finally done for.
Thx.
Conative719
Can you get into twrp? If I remember correctly you should be able to wipe dalvik and cache and get out of that bootloop.
Conative719 said:
Conative719 here, I flashed that via twrp but still in a bootloop haven't been able to bring it back after I flashed twrp I've tried my recent stock zip through Odin and nothing is there a nougat file on sammobile yet or is my phone finally done for.
Thx.
Conative719
Click to expand...
Click to collapse
Well i got my edge back to 6.0 and into root but today i just did nougat. Im a lil weary about rooting this edge variant do u or any one else have ideas on root for the edge variant
Sent from my SM-G925P using Tapatalk
So does anyone have root and custom recovery yet fot the edve variant running 7.0
Sent from my SM-G925P using Tapatalk
Conative719 said:
So does anyone have root and custom recovery yet fot the edve variant running 7.0
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Right now best to use is magisk v12
Sent from my SM-G920P using XDA-Developers Legacy app
Nougat and Edge app issues
A friend is not liking Nougat did to her Edge. Seems like all the edge apps are different or non-functioning. I tried to help, thinking it was just a setting she missed, but all I could find were Samsung edge apps on the Samsung store. Specifically she liked the slide-able, colored bar notifications for each individual favorite contact. Now all she has is all contacts. Any idea what I am missing? Thanks!
PS 100% stock
OnceAMatrixMan said:
A friend is not liking Nougat did to her Edge. Seems like all the edge apps are different or non-functioning. I tried to help, thinking it was just a setting she missed, but all I could find were Samsung edge apps on the Samsung store. Specifically she liked the slide-able, colored bar notifications for each individual favorite contact. Now all she has is all contacts. Any idea what I am missing? Thanks!
PS 100% stock
Click to expand...
Click to collapse
Bump. Thanks
One last bumpity bump, just in case someone out there missed this and can assist.