Database Info

[Q] (HELP) Micromax A110 stuck on Bootscreen- Rom-Canvas 5.1

Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:

4.2.2 won't support SELinux
kunalsaddar said:
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
Click to expand...
Click to collapse
That Recovery you flashed is SELinux enabled and is not supported by 4.1-4.2.2 Jelly bean Roms so you have got boot loop . You can try other recovery or flash higher android version roms .
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
I think this CWM recovery will work with your downloaded rom
http://forum.xda-developers.com/showthread.php?t=2204785
And remember before flashing anything clear data,cache and dalvik-cache.
Happy Flashing

Thanks guys for the reply, let me flash the above CMW and check. Will revert shortly

How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?

kunalsaddar said:
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
Click to expand...
Click to collapse
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .

4shreyas said:
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
Click to expand...
Click to collapse
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow

kunalsaddar said:
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
Click to expand...
Click to collapse
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works

4shreyas said:
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
Click to expand...
Click to collapse
Hey shreyas,
I have tried it with SP tools, it doesnt work, man. Drivers, Softwares, updated all of them, i keep doing everything. I know i am doing something wrong, but its hard to identify, spent like the entire night trying to make it. Can't i get a flashable zip for CMW instead or know that on which rom did the CWM selinux work on? This boot looping is now killing :fingers-crossed:

Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:

kunalsaddar said:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
Click to expand...
Click to collapse
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!

4shreyas said:
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
Click to expand...
Click to collapse
True that, i actually gave up trying to find the drivers. There arnt any 4.3 or 4.4.x roms released for mmx. When they do, will surely apply the Selinux CWM. Thanks for all the help .:good:

[Q] Help!! Only fastboot mode.

Please, need help.
My mate only starts on fastboot mode. Can flash stock and cwm recoveries, but dont works. No dload. Nothing. Please somebody who knows what to do.
Thanks a lot.

I'm having the same issue on my MT7-L10. I flashed the stock firmware (extracted from the URL consumer.huawei.com/en/support/downloads/detail/index.htm?id=32364 using update.app extractor) using CWM and the phone never boot up again. It only shows the Ascend logo and stops there. I've never had any problem using CWM to flash firmwares on it before. So I am assuming the extracted firmware is the cause.
I can access the bootloader and flash recovery (both custom and stock) or boot img, but the phone would not boot up. Since I can't get to the recovery, there wasn't much else I could do; let alone, flash the backup. It had been 2 weeks since that happened and I tried many methods but found no solution online. Might as well give up on it unless there's a real solution for us.

please solution

semo9 said:
please solution
Click to expand...
Click to collapse
Flash original recovery put desired firmware in dload sd card and do 3BTN

semo9 said:
please solution
Click to expand...
Click to collapse
If you installed CWM it is logical that you can' t install stock ROM, neither 3buttons can start...
This has been already discussed and repeated so many times before.
Please, be so kind to use the "search" button next time and give a look in the proper section of this FORUM.
You would have fount the "solution" in a while, instead of asking.
Please consider this next time. Thank you !!!

tuddu said:
If you installed CWM it is logical that you can' t install stock ROM, neither 3buttons can start...
This has been already discussed and repeated so many times before.
Please, be so kind to use the "search" button next time and give a look in the proper section of this FORUM.
You would have fount the "solution" in a while, instead of asking.
Please consider this next time. Thank you !!!
Click to expand...
Click to collapse
I tried all what you say. Of course, i reflashed the stock recovery first, but I can't acces to recoverys stock with dload.
And of course, i read and tried all threads before asking.
Thanks.

mek32 said:
I tried all what you say. Of course, i reflashed the stock recovery first, but I can't acces to recoverys stock with dload.
And of course, i read and tried all threads before asking.
Thanks.
Click to expand...
Click to collapse
u don't need to access stock recovery .. it isn't like custom where u can move around .. in orig recovery is only wipe factory and reboot that's all...
just do what i told that other guy .. let us know..

unbrick
nekokari said:
I'm having the same issue on my MT7-L10. I flashed the stock firmware (extracted from the URL consumer.huawei.com/en/support/downloads/detail/index.htm?id=32364 using update.app extractor) using CWM and the phone never boot up again. It only shows the Ascend logo and stops there. I've never had any problem using CWM to flash firmwares on it before. So I am assuming the extracted firmware is the cause.
I can access the bootloader and flash recovery (both custom and stock) or boot img, but the phone would not boot up. Since I can't get to the recovery, there wasn't much else I could do; let alone, flash the backup. It had been 2 weeks since that happened and I tried many methods but found no solution online. Might as well give up on it unless there's a real solution for us.
Click to expand...
Click to collapse
did you find any solution to this problem.........

mpt123 said:
did you find any solution to this problem.........
Click to expand...
Click to collapse
I took it to the Huawei service center. A week later, they called and said that it was a defect on motherboard and replaced it for me. No solution on my end.

nekokari said:
I took it to the Huawei service center. A week later, they called and said that it was a defect on motherboard and replaced it for me. No solution on my end.
Click to expand...
Click to collapse
Thanks for letting me know....im facing the same problem.

Need Help,Mobile Restarting for every 5 minutes

Hi All,
I am new to this xda, firstly i am really very sorry for typing this much question.My problem is,
I am using mi4i(MIUI7). previously I tried to flash custom rom(CM13) to my device,for that i have installed TWRP and alse rooted my device using Mi4i-ToolKit.
Firstly I have taken backup of my current rom (i.e MIUI7), after that selcted CM13 zip and tried to flash that rom,but it is failed to install.
Out to my curiosity, I have searched in xda forms and i got a key that firstly my device has to be downgraded to miui6.6.10 or below version.
then I downgraded my device with 6.5...(miui6 ver) it was downgraded successfully.Then, I tried to flash CM13. But it again failed to
install.and again I restored my entire backup to MIUI7. Now, The problem is my device has been restarting for ever 5 mins since last night.
please provide any inputs to get my back my device to perfect condition.

First of all, flash MIUI 6.6.10 via fastboot and see if the device works. Then after that try to flash CM13 following the instructions provided by the author of the ROM.

Hackerpunk1 said:
First of all, flash MIUI 6.6.10 via fastboot and see if the device works. Then after that try to flash CM13 following the instructions provided by the author of the ROM.
Click to expand...
Click to collapse
Thank yo vm for your response .If you don't mind please provide any reference link to flash MIUI 6.6.10 via fastboot. as i don't know how to it exactly.by the way i am still having TWRP in my device.

Here you go Flash via Fastboot

Did it worked out?

Hackerpunk1 said:
Did it worked out?
Click to expand...
Click to collapse
Awesome stuff,Thank you vm bro' .It worked like charm.I got my phone back.

Help! NO OS installed/Need help flashing stock ROM to soft(?)-bricked S6 SM-G290F

So yesterday i done a pretty stupid thing of restarting my phone after I hid my SU binary using hide my root. This left what i think was a soft-brick as it was stuck on the samsung animation. I then stupidly enough got confused with my TWRP recovery menu and ended up wiping out my OS, leaving only the TWRP recovery on the phone. I then decided to download a 6.1.1 stock rom for my SM-G920F. When i tried flashing however, somehow ODIN froze and i made another stupid mistake of restarting my phone from download mode which resulted in the phone being froze on a screen saying " an error has occurred while updating the device software use the emergency recovery function s6 " cant provide an image as this is my first post, but please google the error message if you wish to see it
So i panicked thinking my phone was dead completely and surrendered, but today i managed to hook it up to TWRP and flashed the recovery. Now when i bootup i can access download mode and it boots straight to recovery. To make matters worse I began trying to download the original rom i recieved when i got the phone, however when i try flashing i get errors such as " SW rev, Check Fail: 'x' binary 'y' device "
(x and y vary for each stock rom i tried flashing.)
I have no way of finding out my firmware, bootloader info or anything. Is there ANY fix to this? I've made a huge mess of everything and I'm now desperate. Please, any advice would be a god-send. Thank you for withstanding this crappy post, I'm kind of a noob at xda.
EDIT 1- So I managed to install a custom ROM and kernal as i could transfer files while in TWRP for some reason but a new problem has showed up. So as of right now I have a custom rom installed which works, but when reboot my phone, TWRP is automatically opened after the initial samsung logo. I usually have to reflash my custom ROM (without wiping any data besides cache and dalvik) and the ROM installer will then reboot into the ROM, however this means when my phone turns off, my recovery is booted up instead of the ROM
I'm sensing some sort of Bootloader problem?

Metro221 said:
Now when i bootup i can access download mode and it boots straight to recovery.
Click to expand...
Click to collapse
First off i dont own an S6 (im still rocking the S4), but i have had some problems over the years but always managed to fix them in the end.
So while in Download mode are you not able to Flash Stock ROM (downloaded from samfirmware) via ODIN (following the instructions on the site)?
In TWRP are you not able to flash a custom ROM (probably with OTG cable if you dont have the ROM stored on the internal memory).
Any issues i have had i have always been able to do at least one of the above methods. If you cant do either or, im not sure what else i would try.
Thanks

Metro221 said:
So yesterday i done a pretty stupid thing of restarting my phone after I hid my SU binary using hide my root. This left what i think was a soft-brick as it was stuck on the samsung animation. I then stupidly enough got confused with my TWRP recovery menu and ended up wiping out my OS, leaving only the TWRP recovery on the phone. I then decided to download a 6.1.1 stock rom for my SM-G920F. When i tried flashing however, somehow ODIN froze and i made another stupid mistake of restarting my phone from download mode which resulted in the phone being froze on a screen saying " an error has occurred while updating the device software use the emergency recovery function s6 " cant provide an image as this is my first post, but please google the error message if you wish to see it
So i panicked thinking my phone was dead completely and surrendered, but today i managed to hook it up to TWRP and flashed the recovery. Now when i bootup i can access download mode and it boots straight to recovery. To make matters worse I began trying to download the original rom i recieved when i got the phone, however when i try flashing i get errors such as " SW rev, Check Fail: 'x' binary 'y' device "
(x and y vary for each stock rom i tried flashing.)
I have no way of finding out my firmware, bootloader info or anything. Is there ANY fix to this? I've made a huge mess of everything and I'm now desperate. Please, any advice would be a god-send. Thank you for withstanding this crappy post, I'm kind of a noob at xda.
Click to expand...
Click to collapse
If you boot in TWRP recovery it can be soved easily.
1)first try do wipe data and internal partition.And then try flashing stock firmware with odin(download proper file basing on ur model)
2)U may download a rom for ur model and flash using twrp.then if u want u can stay with the rom,i u dont u can try to flash again with odin after installing rom
Click :good: for my answer

Rremi said:
If you boot in TWRP recovery it can be soved easily.
1)first try do wipe data and internal partition.And then try flashing stock firmware with odin(download proper file basing on ur model)
2)U may download a rom for ur model and flash using twrp.then if u want u can stay with the rom,i u dont u can try to flash again with odin after installing rom
Click :good: for my answer
Click to expand...
Click to collapse
Yeah i managed to install a custom rom Tyrannus v 28.1, through TWRP, however, now I am experiencing a new problem, when i reboot - my phone boots up into TWRP instead of the ROM, more information in the edit i made in the post. THanks for all the continued help

Rremi said:
If you boot in TWRP recovery it can be soved easily.
1)first try do wipe data and internal partition.And then try flashing stock firmware with odin(download proper file basing on ur model)
2)U may download a rom for ur model and flash using twrp.then if u want u can stay with the rom,i u dont u can try to flash again with odin after installing rom
Click :good: for my answer
Click to expand...
Click to collapse
Waste of a post, but i wanted to say shqiptar, faleminderit. :*

Metro221 said:
Waste of a post, but i wanted to say shqiptar, faleminderit. :*
Click to expand...
Click to collapse
Ska gje.
Nga shqiperia je ?

Rremi said:
Ska gje.
Nga shqiperia je ?
Click to expand...
Click to collapse
Po po nga shqiperia.
But living in London ????

Would Samsung smart switch not help installing the stock rom?
Sent from my SM-G920F using Tapatalk

jr866gooner said:
Would Samsung smart switch not help installing the stock rom?
Click to expand...
Click to collapse
'Device not recognised' fixed it though. Flashed custom ROM with TWRP

Emergency recovery will and should help.

Help to flash ULEFONE S8 PRO GOLD

Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you

mfonemaello said:
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
Click to expand...
Click to collapse
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too

thxs Klima i fixed
Klima1123 said:
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
Click to expand...
Click to collapse
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?

mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
I've heard about it, but I didn't noticed nothing strange coming from the app, I'll scan it with avast, if he finds something, I'll deleted him, my phone does have root
---------- Post added at 01:50 PM ---------- Previous post was at 01:41 PM ----------
Hey guy, I'm trying to port lineage os 14 & 15 to the S8 Pro, do you have experience with twrp, flash etc.? You could help with being my beta tester, next I'll put some betas on android file host, and make a forum here on XDA for the phone

Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?

4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
I have found it on 4pda.
Just google ulefone s8 pro 4pda.
You need to let translate by google, because of different language.

4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root

Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?

Klima1123 said:
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Click to expand...
Click to collapse
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.

4ndyroid said:
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Click to expand...
Click to collapse
Something like this has happened to me too. Boot your phone on twrp then select the option 'Wipe', then "Format data", my phone only booted up after I did this
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
In the sound recorder I didnt find nothing, but the app GYBeautySnap aka BeautyMakeup open some annoyng processes (that consumes about 40mb of ram) that has something like ads, I think he is the real virus

Tried wiping then 'format system', still didn't work, stays stuck at the boot logo, bit thanks for the help anyway.

It rebootq only to a green TWRP!

Touf344 said:
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
Click to expand...
Click to collapse
My phone use V3.01 firmware and it's worked

Klima1123 said:
My phone use V3.01 firmware and it's worked
Click to expand...
Click to collapse
What was the process you used?

4ndyroid said:
What was the process you used?
Click to expand...
Click to collapse
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment noverity.zip

Klima1123 said:
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment 4460246
Click to expand...
Click to collapse
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?

4ndyroid said:
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
Click to expand...
Click to collapse
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip

Klima1123 said:
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Click to expand...
Click to collapse
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway

4ndyroid said:
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
Click to expand...
Click to collapse
which firmware version are installed on your phone? Have you tried flashing the official ROM from the ulefone site, then retried the process?

Have tried on both v3. 01 & v3. 03 firmwares. Stock firmware wasn't downloaded directly from ulefone site, imagine it will be the same but will give it a go.