Database Info

Specifying DNS Servers for WiFi Connection

Hi Folks,
I have set up my wife's SPV E650 to hook up to our wireless network at home so she can connect to the internet through the home wireless network. We have static IP's on our LAN. Although I have specified a static IP for the E650's wireless connection, I cannot find out where I specify the DNS servers to allow her to connect to the internet via our ISP, (I know the DNS server IPs, I just can't find out where I enter that info on the E650). So at the moment, I can connect to the home network, but cannot get onto t'internet!
It is quite likely that I am being a spaz and am missing something obvious... regardless, if you can help me, let me know!
Cheers
MW

even if you have a static IP you should not have to specify a static DNS because your default gateway should be your router IP address and your router should automatically give the DNS servers to any device that pulls that ip address

Disabled said:
even if you have a static IP you should not have to specify a static DNS because your default gateway should be your router IP address and your router should automatically give the DNS servers to any device that pulls that ip address
Click to expand...
Click to collapse
Thanks for your response.
All the other devices on my home network (laptop, PC, Xbox 360, SPV M3100) ask for the DNS server to be specified in a static IP environment, and they all connect to the internet just fine through the wireless network.
I am sure you are right, but I know that none of the above mentioned devices connect to the internet without the DNS servers specified.
So, question remains, how do I specify the DNS servers on the E650? Maybe a registry entry?

@mortalwombat,
i have the same problem with my htc s710.
Even though I run the wireless network with static IPs, I set my HTC S710 to get the IP "from a server" (= dynamic IP setting).
I did this after I tried with an IP Adress within my IP Adress Range.
So what happened is that my S710 somehow gets an IP Adress from my router that is almost in my regular IP Range.
You can try to set an static IP Adress within your Range first and then switch to dynamic IP Adress on you device..
Marcus

What api decide whether connect to internet?

hi,ALL.
I have two ppc,A and B, A create a bluetooth PAN access point,B connect to A(especial reason,only B connect to A,not A connect to B).B have two network adapter,And B use NAT service.
A ip 192.168.0.1
mask 255.255.255.0
gateway 192.168.0.2
B ip 192.168.0.2
mask 255.255.255.0
gateway none
WiFi ip 192.168.1.2
mask 255.255.255.0
gateway 192.168.1.1 (This interface connect to internet)
Now, On A ppc,a few tool app can connect to internet,but PIE can't connect to internet,I think PIE use ConnMgrConnectionStatus api check status. What api can resolve this problem?

[Q] Motorola BackFlip doesn't connect to my Wi-Fi

Greetings. Sorry if my question maybe is a noob question, I don't know... I'm new of the forum...
I have a problem with my mobile phone. Recently I've bought a Motorola BackFlip, which mounts Android 1.5. I'm generally very satisfied with it, except for a very annoying thing: I can't connect to Internet via Wi-Fi.
My wireless network uses a computer connected to Internet by a USB modem; this PC, by a Wi-Fi adapter, is connected to a Wi-Fi Access Point. The other computers which use this connection use TCP/IP parameters such as:
IP Address: 192.168.0.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1 (which is the PC connected by the USB modem)
DNS 1: 192.168.0.1
DNS 2: ---
These are the parameters that I use with one of my computers. I tried to insert them in the phone (using, as IP Address, 192.168.0.3, or 192.168.0.5, but with the same result), and although it appears "connected to Untitled (Untitled is the name of the AP)", I obtain a very strange result: I can go on Google, access the Android Market, do searches on Google and use any other Google service (such as Images), but when I try to go on any other site - even starting from a Google Search result -, such as Facebook or Wikipedia, or when I try to use applications such as eBuddy Messenger to access MSN, I can't. It passes some time and then it appears an error such as "unable to access the page".
How can I solve this very annoying problem? I must start by saying that I can't use the DHCP with my Access Point, because I can't set automatically 192.168.0.1 as default DNS and Gateway for any computer connected: my AP doesn't have this function.
Thanks in advance. And excuse me for my bad English, if it is so: I'm a 17-years-old Italian...

how to connect
How to conect internet via proxy local

[Q] Sensation 4g connect pc on another subnet on LAN

Sensation 4g connect pc on another subnet on LAN.
Can you please help me to connect my Pc behind second router.
I have 2 routers at home :
Tplink and belkin ...the tplink is giving internet to the belkin and when i am connected to the belkin i cant acces a pc with my sensation which is connected to the tplink.I am using ES Explorer to brawse the files but it is not giving me option to brawse by PC name and only by ip address.And when i try to connect the pc on the tplink network it is not finding it.
Tplink network is : 192.168.1.1 to 255
Belkin Network is : 192.168.10.1 to 255
Any help ?

any help ?

nobody knows ???

zhelev81 said:
Sensation 4g connect pc on another subnet on LAN.
Can you please help me to connect my Pc behind second router.
I have 2 routers at home :
Tplink and belkin ...the tplink is giving internet to the belkin and when i am connected to the belkin i cant acces a pc with my sensation which is connected to the tplink.I am using ES Explorer to brawse the files but it is not giving me option to brawse by PC name and only by ip address.And when i try to connect the pc on the tplink network it is not finding it.
Tplink network is : 192.168.1.1 to 255
Belkin Network is : 192.168.10.1 to 255
Any help ?
Click to expand...
Click to collapse
This is a wrong thread for this topic, it has nothing to do with Sensation......anyway, I'll share with you my own experience, hope it helps.....
I'm using a Dlink (ADSL modem router) and a Cisco WiFi router, the connection is like:
Internet -> Dlink -> Cisco -> (pc, phone, tablet, nds, etc)
Setup for Dlink:
IP : 192.168.1.1
Subnet : 255.255.255.0
DHCP is enabled
IP range : 192.168.1.3 ~ 254
Connected to internet via PPPoE/PPPoA
Setup for Cisco:
IP : 192.168.1.2
Subnet : 255.255.255.0
DHCP is disabled
Take note that the connection between Dlink & Cisco is LAN port to LAN port, the internet port on Cisco is not used. This way, no matter you're connecting to Dlink or Cisco you'll get an IP in the same subnet (192.168.1.3 ~ 254) which is assigned by Dlink.
I'm no expert in networking, this is what I get after consulting a couple of experts and I just follow exactly. In my situation, things work perfectly that I can see the whole network neighborhood, share folders/files, share printer, etc.

i cant use the same subnet because my belkin router cant work if i do so ... must other solution?

zhelev81 said:
i cant use the same subnet because my belkin router cant work if i do so ... must other solution?
Click to expand...
Click to collapse
Well, this is beyond my knowledge to help. Maybe you can checkout the following link and post your question there, the experts there probably can help you solve your problem.
http://www.tomshardware.com/forum/30502-42-router-router

[Q] Why does my Wireless not connect in G300 U8815!!!?

Hello everybody! and sorry that i post this question here!
I have noticed some 2 months ago that i can not connect to wireless on my Huawei Ascend G300 U8815 , but i didnt care.
It was originally on GB 2.3.6 B885 then i upgraded to B895 then ICS B927 but wireless didnt work even before upgrading.
Yesterday i bought a TP link Router WR740N and setup my internet on it making it as an A.P, so i was sure that setting were correct since i connected with my laptop and another phone which is Nokia Xress Music 5530, but not on my G300.
So, my problem is that the phone recognize Wireless connections and when i try to access with or without password, it just says that my network is registered and keeps on trying to connect but unsuccessfully.
I tried all securities on my router from non to wep to wpa to wpa2 psk and still the same...
i even checked in some forums that some people experienced this problem, so they proposed :
-to reset phones setting to factory which didnt work
-use wifi fixer which didnt work
-upgrade to ICS which made me happy but still no wifi.
-use static ip address but also refsued to connect.
my self i downloaded WIFI MANAger Premium which is a very good soft but still knowing all networks but keeps turning and then stops.
Please find below my router settings:
LAN MAC Address:
64-70-02-55-4F-F8 IP Address:
192.168.1.1 Subnet Mask:
255.255.255.0 Wireless Wireless Radio: Enable Name (SSID): Meganet Channel: Auto (Current channel 6) Mode: 11bgn mixed Channel Width: Automatic MAC Address: 64-70-02-55-4F-F8 WDS Status: Disable WAN MAC Address: 64-70-02-55-4F-F9 IP Address: 88.222.160.212 Dynamic IP Subnet Mask: 255.255.248.0 Default Gateway: 88.222.167.254 DNS Server: 88.222.0.1 , 88.223.0.1
So, on the phone when i used static IP i did like this:
IP: 192.168.1.101
Mask: 255.255.255.0
GW: 192.168.1.1
DNS1: 192.168.1.1
DNS2: 192.165.1.1
Can any body help me please because i have tried all solutions and i think that the wireless driver is corrupted or something like that, so can it be replaced or flashed somehow because im using G internet now and it's exensive.....
Please i need your expertise!

Very strange
I am g300 owner too,and i never had any kind of problem with WiFi,it connects to everything (access point,printers,public places network,etc). It could be a factory problem,and I think you should take it into assistance. If you can't or you don't want to,you can try to root it and install an other kernel,but remember that this will compromise your warranty. There are all the guides and things you need at M*d*co.com huawei g300 forum. The best thing you can do is the first one,the second is a strictly recommended alternative.
Bye

Thanks...
Thanks for the answer.
So, by changing Kernel it means what? because i dont have big idea in Android and i just know the FW change so is it the same?
I also know that roting means giving full access to the phone so i have to root the phone and then?

I try to explain you that in a few lines
Android is a UNIX based OS,and it has a structure with UI,libraries,and lots of other stuff. The Kernel is the "root" of the structure "tree". It has every hardware driver and it controls those. It controls also WiFi lateen yard drivers, and this is why I advised you to try to change kernel and use a custom one,but this probably will not help you,cause in the update between ICS and gingerbread there's already been a kernel change(from 2.6.35 Linux kernel in GB to 3.0.1 Linux kernel in ICS), so the more probable reason of your problem is that your WiFi lateen yard is broken from factory. Take it to assistance, it's better than lose warranty and risk to break your phone