hii frends my phone got brick i try everything but not working anything
i also goto care they make orgianl software but that also not working please help me dueto this my phone also got in unrroted so now i cannot install custom rom please help
me i aslo try flash tool but that also not detecting i try all driver like vcom adt etc
Click to expand...
Click to collapse
what things are not accessible
1.ctm recovery
2.debugging mode
Related
Hello,
I'm new to flashing and installing ROM on android phones.
I enabled root in this phone.
I wanted to install JellyBean 4.2.2.
After a long search on the internet and a lot of trying I decided to open a thread here.
My phone is Star N800 MTK6575 with Android 4.0.4.
When I tried to install ROM through recovery mode it showed me this:
"Failed to verify whole-file signature"
I tried to install ClockWorkMode Recovery without success
SP flash tool and Odin also disappointed me..
Could anyone help me please?
Maybe I did something wrong, can you please explain me step by step how to upgrade this phone?
Please help me, every answer will be appreciated.
Thank you!
I think I found the problem.
When I plug in my phone in the usb, when it's turn off and without the battery, I see it in the Device Manager appearing and then disconnecting.
I tried to change the Power Settings but it didn't help. Anyone faced this problem in the past and knows how to fix it?
Dont alter the zip,
in cwm toggle off the sign verification,then try flashing..:thumbup:
SENT FROM MONSTER ! ! !
HIT THANX OR I WILL JUST
CRY...
I don't have CWM, I have a regular android recovery mode..
I can't flash anything with it..
HELP ME PLEASE :crying:
Sel0x said:
HELP ME PLEASE :crying:
Click to expand...
Click to collapse
Hi, If u want to flash anyting from SP flash tool .Den follow these things.....Turn off ur phone with sim card,batter,and sd card out....Also make sure that u have installed mtk6575 drivers installed already....After that load everthing in sp flash tool and before clicking on download button..just press and hold volume up key and then insert usb in port...ur pc will detect the phone and install recovery or Rom........I also faced the same problem but this thing really helped me to install ROM
Hi,
Could You provide me that 4.2.2 ROM for N800 MTK6575, please.
I have a "brick" what needs a firmware...
Thanks,
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
try getting into recovery (vol + or - and pwr) and make a full wipe. if it will not power on, try flashing a new firmware. make sure you got the right one!
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
dewdrops said:
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
Click to expand...
Click to collapse
I think it's out of charge, just plug in the charger and see what happens..
yog12 said:
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
Click to expand...
Click to collapse
i tried doing that but thats not working...can you please tell me the procedure?
Lets Start
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
1)Install Drivers.
2)Open SP tool
3)Select 'Android Scatter file' inside ROM folder.
4)Click Firmware->Upgrade Button.
5)Connect Phone{Switched off} to PC via USB Cable.
6If everythings right,Flashing will proceed..
7)Wait till It finishes..A green ring is displayed on completion..
8))Now Close SP tool..Remove Phone from PC..
9)Switch ON the phone...It is successfully Flashed...:laugh:
I also face same problem some time when I make Factory or DRM reset
Green Android Robo with rotating frame
Start again and again. No switch off .. No effect after remove battery..
Only 1 solution "Do flash with SP Tool"
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
Hey no worries.. just follow my dis thread 'unbrick bricked canvas 2' :thumbup:
Link: http://forum.xda-developers.com/showthread.php?t=2376667
hit thx if i helped...
Hi, I have and Micromax Unite 2(A106) 8gb model
I want to downgrade it to Jellybean for installing custom rom but the phone was not booting up into recovery mode after flashing with SP TOOLS. :crying: So it formatted the phone using SPTOOL AUTOFORMAT.
Now the phone is neither turing on nor detecting the usb cabel without battery.
Plzzz help me
Plz:crying:
never root the phone with something it is not meant for unless you are developing it yourself specially for you device. Every device has its limitation and speciallity and the rom is designed for it, You use it you are heading for a motherboard replacement
The only solution
amanraj65 said:
Hi, I have and Micromax Unite 2(A106) 8gb model
I want to downgrade it to Jellybean for installing custom rom but the phone was not booting up into recovery mode after flashing with SP TOOLS. :crying: So it formatted the phone using SPTOOL AUTOFORMAT.
Now the phone is neither turing on nor detecting the usb cabel without battery.
Plzzz help me
Plz:crying:
Click to expand...
Click to collapse
you have hard bricked your phone.
google about how to recover from hard bricked mmx unite 2
if this help press like
try reflash with original firmware.
I hv the same prblm with my unite 2 and i went lots of repairing center bt they are not able to repair the phone because its not detecting by usb cable and then I went to micromax customer care and they told me the phone will b repair bt u r not in warranty because of rooted fon you have to pay 1800rs then my phone will come in working condition.
so go to your nearest mmx cstmr care and cunsult with them.
My micromachining unite 2 is not opening . And factory reset also not coming. When switch on the phone it just blink micromax
amanraj65 said:
Hi, I have and Micromax Unite 2(A106) 8gb model
I want to downgrade it to Jellybean for installing custom rom but the phone was not booting up into recovery mode after flashing with SP TOOLS. :crying: So it formatted the phone using SPTOOL AUTOFORMAT.
Now the phone is neither turing on nor detecting the usb cabel without battery.
Plzzz help me
Plz:crying:
Click to expand...
Click to collapse
Hello... You can unbrick your device...
Download original micromax a106 firmware from firmwarefile.com and try to flash it...
I hope it will work for you...
And You are saying that you want to downgrade your device to jellybean for installing rom but in real our device don't have official jellybean firmware our device have only lolipop and kitkat official firmware...
So i think you installed wrong firmware so try to flash original firmware...
You can install any roms from kitkat firmware...so You don't need to downgrade your device to jellybean...
Good Luck...
Whoops... Sorry... For late reply... Your device bricked in November 2014 so i think you repaired your device in 2014 or 2015 but i hope this reply can help another user...
Manish Kumawat said:
Hello... You can unbrick your device...
Download original micromax a106 firmware from firmwarefile.com and try to flash it...
I hope it will work for you...
And You are saying that you want to downgrade your device to jellybean for installing rom but in real our device don't have official jellybean firmware our device have only lolipop and kitkat official firmware...
So i think you installed wrong firmware so try to flash original firmware...
You can install any roms from kitkat firmware...so You don't need to downgrade your device to jellybean...
Good Luck...
Whoops... Sorry... For late reply... Your device bricked in November 2014 so i think you repaired your device in 2014 or 2015 but i hope this reply can help another user...
Click to expand...
Click to collapse
Hey I need help...my mmx unite 2 is hard bricked and can't flash through sp flash tool
last year in november.....i also hard bricked my mmx unite 2 like this only... and guess what....now i have moto g3 and that new looking mmx unite 2 is still there in my bag but unfortunately its completely unresponsive....i still google sometimes and also visit xda to find solution to get back it in working condition...but i dnt find anything...so guys if anyone of u finds solution to that prblm..plzz let me knw...
I have micromax unite 2 phone.My problem is the phone is just showing the logo when starting and it is not moving further.everything i have checked but the condition is same.help me out other than hard reset.
Search and find solution for boot loop
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
jeevan123 said:
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
Click to expand...
Click to collapse
If its detected by PC, then using SP flash tools, try flashing a new ROM again... and it should be back to normal again....
when iam flashing to my mobile error occurred that ERROR 4032 : Enable DRAM failed! what i do >? plz help me i am downgrading to lollipop to kitkat help me please
Did anyone found the solution?
i need the same information
i am also unable to format my previous rom...................
plz help
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
[email protected] said:
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
Click to expand...
Click to collapse
take it to micromax care they will flash stock software to it . i had same problem a year ago
first i have an old micromax a111 which didnt had battery in it.so when i took it to the shop I got the battery but the android was not booting.at repair shop he installed a rom but it came with issues.
phone freezes when activating wifi
pressing the power button once freezes and restarts phone
phone does not shut down stuck at canvas logo
so i want to install another rom which works fine[please if you know about a rom best with a111 please tell me]
i dont know how to root.tried many menthods but none worked
cant install a custom recovery
i am dumb at mobiles so please can anybody give me a tutorial on my situation step by step
pls pls pls pls help me guys
sorry for my bad english