Related
I had a Vibrant before and flashed it constantly. I soft bricked it several time and it was easy just to Odin back to stock and try again. Before I begin to flash Roms on this phone I would like to know how one would fix a bricked Nexus S. I searched "bricked Nexus S" and didn't come up with much.
Sent from my Nexus S using XDA App
Flash a stock img thru fastboot/adb. Just as painless as Odin was if not easier.
Sent from my Nexus S
Yeah I figured that much but I have never used ADB before. What are the commands to flash a stock img and where can I get a stock img? I already have ADB set up, serial # comes up when I enter - adb devices. I'm ready to root and flash but I want to be prepared for anything. I don't want to panic for ten minutes like I did the first time I bricked my Vibrant.
Sent from my Nexus S using XDA App
You should be able to snag a stock image from the development section. As far as what adb commands to use check out any of the root tutorials in development.
Sent from my Nexus S
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
leyvatron said:
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
Click to expand...
Click to collapse
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
kenvan19 said:
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
Click to expand...
Click to collapse
Coolest wife ever? haha
risegeek said:
Coolest wife ever? haha
Click to expand...
Click to collapse
hehe why'd'ya think I married her
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
not enough information is present. you can attempt to get into bootloader / recovery, plug USB to the computer. When plugged, does the computer make a plugged in noise? if it does.. try turning it on, try using adb on it, etc.
as a last resort: if its not rooted or modified in any way, you can go back to best buy and exchange it since you said you've only had it for 3 days
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
First thing to do is pull the battery, let it sit a minute or two, then put the battery back in and try to boot.
Also, try booting into recovery or fastboot. With power off, press and hold volume up button, then press/hold power on switch. You should enter fastboot mode. From fastboot menu, select boot to recovery. The phone will reboot and you'll get to a screen with an "!" and an android robot on it. At that point you press hold power, then press/hold volume up (make note that this is the reverse of what you did earlier).
Once in Recovery, try wiping cache from the menu.
Reboot.
If still no good, then repeat the process but pick factory reset/wipe from the menu in recovery. Note that this will wipe all personal data and apps off the phone but it won't touch your sdcard contents.
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Van_Dyke said:
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Click to expand...
Click to collapse
Last option is to try to trick it into Samsung's Download Mode (see the Odin thread in Development section), but if the keys aren't recognized you can't soft boot into it so you'll need a dongle with a resistor to get there.
Sounds like it's truly a brick at this point. You'll probably have to return it, but I'm concerned about returning a phone that has your personal data on it without being able to wipe it. Doesn't seem like much way around that at this point if you can't get fastboot or download.
get the 301k resistor JIG and then you can go into the download mode even without the 2 keys + usb plug
you can always make your own JIG if you have the materials at home or a nearby Radio shack
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
That's pretty scary that it wouldnt take a charge if run down completelty. But hey handy to know incase it happens to any of us,
If you get any repeat i would take it back to get a fresh battery of course (only right to do so).
here's hoping you never need to though
Van_Dyke said:
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
Click to expand...
Click to collapse
That is scary......
Sent from my Nexus S using XDA App
Bricked
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Noob {MAC User}... Please be gentle
Greetings Everyone,
Okay, so I endeavoured to root my phone last night and was successful. I ran into trouble when the clockwork recovery and superuser permissions kept getting removed each time I reboot.
Now, I'm at the Google splash screen with no way to move forward. I'm a mac user and I don't really get the adb thing. Got adb to work with mac from a youtube video, but still not sure what commands to run.
What I've done so far:
- wiped cache
- wiped/factory data reset
- retraced my steps by using terminal to setup superuser permission from this post (http://forum.xda-developers.com/showthread.php?t=927838)
What I think:
- maybe in all of my clicks I removed the ROM, so the phone doesn't have a ROM to work with.
This maybe a really infantile conclusion, but I know there's a solution (had a rooted G1 that I flashed all the time and thought I bricked once but was able to get it back to stock).
Eagerly waiting for a reply... no cell phone if this can't be fixed.
Tamara
warrenb said:
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Click to expand...
Click to collapse
It would be easier to help you if we knew exactly what you did that caused the problem. You said you tried to unlock it...you mean fastboot oem unlock or something else?
If you can get into fastboot, you're not totally lost, but the computer needs to see the phone to do it.
I'm working in a vacuum here on what your real problem is, but without further details, the things you can try are boot into recovery (from the fastboot mode select boot recovery)...if you're stock recovery, press/hold power, then volume up once you see the android "!". From there wipe cache and whatever else it will let you wipe. Try rebooting. IF that didn't work go back to recovery and try a factory reset of the phone (will delete all your apps and stuff on the phone, but not on the sdcard (pics and stuff).
If none of that works, you can still try getting Clockwork recovery on the phone via fastboot. Boot phone to fastboot and then on computer type the command "fastboot flash recovery <put file name of recovery version you're flashing here>"
Once in clockwork, you should have access to adb via the computer. On your computer go to the Development section here and download any of the various nandroid images posted there. Now you use clockwork mounts and storage menu to mount the sdcard. Then use adb to "adb push <insert path and filename of your nandroid image here> /sdcard"
Unmount the sdcard with the clockwork mounts and storage menu. Now go to the backup menu, select advanced restore and find the nandroid image and restore it.
With any luck, you should be able to boot into a fresh phone.
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Drdandy said:
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Click to expand...
Click to collapse
You only flash pd98 files from fast boot not from CWM recovery. Boot in bootloader and it will find it
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Drdandy said:
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Click to expand...
Click to collapse
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
zelendel said:
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
Click to expand...
Click to collapse
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Since you can boot into recovery, adb should still work. Enter recovery then plug in your phone to PC and run adb reboot bootloader
Have you tried reflashing a rom in recovery aswell?
Drdandy said:
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Click to expand...
Click to collapse
If you are booting into CWM your not back to factory. As stated above you can use adb to boot into bootloader
Just making sure I'm doing this right as its the first time I've ever use adb commands to me phone. Do I need to downloand Android SDK to write commands to the phone?
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Drdandy said:
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Click to expand...
Click to collapse
OK looks like your bootloader is messed up. Go to the ace hack kit thread. There you will find a link foe the IRC chat room. Go there and tell them what you did. They maybe able to help you.
He there, just recently my phone had an update and i said yes to it. After the update completed It rebooted but never started back up.
When turned on, it just get up to the OnePlus One logo screen and stays there. I have tried a factory reset as I can access the recovery menu but the factory reset doesn't seem to do anything. I let the battery drain until the phone died and then charged it but it still will not start. Plugging it into my PC lets it charge but it does not let you access the storage. Its not a driver problem as it was working fine before the update.
I have tried fast boot but it just gets stuck on the fast boot screen.
I tried using OnePlus One Toolkit but it cant find the phone
I have read that I need to flash it but it would seem I need to transfer a file onto the phone but nothing recognizes the phone to transfer it to.
Can anyone help?
Thanks in advance,
Zastarx said:
He there, just recently my phone had an update and i said yes to it. After the update completed It rebooted but never started back up.
When turned on, it just get up to the OnePlus One logo screen and stays there. I have tried a factory reset as I can access the recovery menu but the factory reset doesn't seem to do anything. I let the battery drain until the phone died and then charged it but it still will not start. Plugging it into my PC lets it charge but it does not let you access the storage. Its not a driver problem as it was working fine before the update.
I have tried fast boot but it just gets stuck on the fast boot screen.
I tried using OnePlus One Toolkit but it cant find the phone
I have read that I need to flash it but it would seem I need to transfer a file onto the phone but nothing recognizes the phone to transfer it to.
Can anyone help?
Thanks in advance,
Click to expand...
Click to collapse
Your persist partition might be corrupt. Grab this:
https://drive.google.com/file/d/0B98G0KTJwnBFUnJCNldodGs2dE0/view?usp=docslist_api
Then do this with fastboot:
Code:
fastboot erase persist
fastboot flash persist persist.img
Didn't work sadly. Maybe I should just flash everything?
Zastarx said:
Didn't work sadly. Maybe I should just flash everything?
Click to expand...
Click to collapse
Yeah, it's worth a shot. You can find full instructions in section 8 of my guide here:
http://forum.xda-developers.com/showthread.php?t=2839471
Yay!
It worked, thanks a lot!
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
try charging the phone for a few hours
se7enlyn said:
try charging the phone for a few hours
Click to expand...
Click to collapse
yeah, forgot to mention that. can't even charge it. when I plug it in it does the same. tries to turn on. shows the first splash screen and reboots doing the same again and again. doesnt even show the charging screen with chinese text and battery animation.
sounds like u need a new battery
ireaper4592 said:
sounds like u need a new battery
Click to expand...
Click to collapse
already tried that too. had a replacement battery laying around. changed it and still no luck.
@bmark240
help please
se7enlyn said:
@bmark240
help please
Click to expand...
Click to collapse
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
bmark240 said:
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
Click to expand...
Click to collapse
Yes, I have TWRP installed, but cant access it. Shows the TWRP splash screen and then reboots after like 10 seconds or so.
ADB does not see device. Only shows the device during that 10 second TWRP splash screen time, but even then no commands are effective and it just reboots.
Already tried holding down power button for few seconds. No luck.
I already installed all the possible drivers and media feature packs on my Windows 10. Still no luck.
And yes, I am running latest Windows 10 Pro x64.
And no, since I cant access Fastboot, I can not re-flash TWRP either.
kallum7 said:
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Gonna try that right now. Hopefully that will fix it.
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
THEVAN3D said:
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
Click to expand...
Click to collapse
because i had bricked my phone a few months ago and that is how i got my phone back using the colour os
THEVAN3D said:
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
Click to expand...
Click to collapse
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
FairuzOnn said:
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
Click to expand...
Click to collapse
Thanks, but I already fixed it.
i had it in the past for some reason too. Managed to fix it using the color os method. Carefully followed the steps until i could flash again. That was a year ago tohugh. There should be some thread around wit some all-in-one solution against bricks.
So I have a recent issue that I have not seemed to resolve. Today, under normal use, my pixel's screen went black and I have not been able to power it back on. I was using the pixel dust rom when the issue happened. I have booted into twrp and tried to factory reset but the screen even went black during the wipe. After that, I booted into the bootloader and attempted to flash google's factory image. The phone actually stays on during the bootloader session. It seemed that I was able to flash the factory rom but once I tried to reboot, the same thing happens. The boot animation will play but that's as far as it gets until the screen goes black once again.
If anyone has had this issue or if anyone has an idea on how to resolve this issue, please respond quickly.
Much Appreciated!
After the screen goes black, are you still able to communicate with the device over adb/fastboot? Have you tried reflashing the factory image (make sure the checksum is correct!)? If you put the phone in the refrigerator for a bit, will it last longer before going black (i.e., bad solder)?
post-mortem said:
After the screen goes black, are you still able to communicate with the device over adb/fastboot? Have you tried reflashing the factory image (make sure the checksum is correct!)? If you put the phone in the refrigerator for a bit, will it last longer before going black (i.e., bad solder)?
Click to expand...
Click to collapse
So during fastboot, the screen actually doesn't go black. I am still able to remain communication and That is when I tried flashing the factory image. How do you make sure that the checksum is correct? I didn't receive any errors during the flash indicating that it didn't flash properly.
If you're using Windows, Hashtab is a good, free checksum program with a GUI.
Download
Info/Review
On Google's image download page, copy the SHA-256 listed, and compare it to what you have locally (which you used to flash onto your phone).
how to boot into twrp? almost the same issue to you, adb cant find my phone.
jcd173339 said:
So I have a recent issue that I have not seemed to resolve. Today, under normal use, my pixel's screen went black and I have not been able to power it back on. I was using the pixel dust rom when the issue happened. I have booted into twrp and tried to factory reset but the screen even went black during the wipe. After that, I booted into the bootloader and attempted to flash google's factory image. The phone actually stays on during the bootloader session. It seemed that I was able to flash the factory rom but once I tried to reboot, the same thing happens. The boot animation will play but that's as far as it gets until the screen goes black once again.
If anyone has had this issue or if anyone has an idea on how to resolve this issue, please respond quickly.
Much Appreciated!
Click to expand...
Click to collapse
bush911 said:
how to boot into twrp? almost the same issue to you, adb cant find my phone.
Click to expand...
Click to collapse
If adb cant detect your phone, it looks like the only way that you're going to boot into twrp is through the bootloader mode (if you had it previously installed). Holding down volume down and power will get you into bootloader and then using the volume buttons, you can cycle through the options until you find "recovery". Pressing the power button will select that option.
post-mortem said:
After the screen goes black, are you still able to communicate with the device over adb/fastboot? Have you tried reflashing the factory image (make sure the checksum is correct!)? If you put the phone in the refrigerator for a bit, will it last longer before going black (i.e., bad solder)?
Click to expand...
Click to collapse
It looks like your freezer method works. Putting it in the freezer actually gets the phone to boot completely into google's factory image. its usuable for about a minute until the problem of freezing and turning off reoccurs. It feels like the phone warms up while running so maybe i have a hardware problem rather than software.
I seem to have the exact same problem with my pixel 32gb, my device was not rooted, nor did I had any custom recovery but the bootloader was unlocked. The issue happened one day while I was browsing the device went black right infront of me. It was not like I did a dirty flash/mod or something. I'm able to detect my pixel via fastboot, able to flash the factory image no problem, but does not boot up after successful completion of the flashing, it just goes black after "google" logo. Anyone found a solution yet??
thank you sir, I have twrp installed previously. but the screen doesnt turn on so I can't choose the recovery model. and try to hold the power button for a while the phone will become warm. no other response:crying:
jcd173339 said:
If adb cant detect your phone, it looks like the only way that you're going to boot into twrp is through the bootloader mode (if you had it previously installed). Holding down volume down and power will get you into bootloader and then using the volume buttons, you can cycle through the options until you find "recovery". Pressing the power button will select that option.
Click to expand...
Click to collapse
Thufail19 said:
I seem to have the exact same problem with my pixel 32gb, my device was not rooted, nor did I had any custom recovery but the bootloader was unlocked. The issue happened one day while I was browsing the device went black right infront of me. It was not like I did a dirty flash/mod or something. I'm able to detect my pixel via fastboot, able to flash the factory image no problem, but does not boot up after successful completion of the flashing, it just goes black after "google" logo. Anyone found a solution yet??
Click to expand...
Click to collapse
Maybe try locking the bootloader? I might try to do that since you and i both are experiencing the same problem with an unlocked bootloader. But i can't see why that would impact anything.