Related
I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: *************
imei: **************
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s
Jojo1992 said:
I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: SH26RW404047
imei: 359901049107937
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.
Jojo1992 said:
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.
Click to expand...
Click to collapse
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7
tivofool said:
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7
Click to expand...
Click to collapse
i downloaded an RUU:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
then i make this:
fastboot devices
fastboot oem lock
then start RUU, but error no connection to device but in cmd i get a connection
I have a CID 111111 is that the Problem?
Jojo1992 said:
I have a CID 111111 is that the Problem?
Click to expand...
Click to collapse
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.
tivofool said:
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.
Click to expand...
Click to collapse
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?
Jojo1992 said:
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?
Click to expand...
Click to collapse
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151
tivofool said:
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151
Click to expand...
Click to collapse
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again
Jojo1992 said:
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again
Click to expand...
Click to collapse
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.
tivofool said:
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.
Click to expand...
Click to collapse
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5
Jojo1992 said:
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5
Click to expand...
Click to collapse
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755
tivofool said:
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755
Click to expand...
Click to collapse
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???
Jojo1992 said:
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???
Click to expand...
Click to collapse
There is a stock recovery here
http://www.modaco.com/topic/353006-...ch-recovery-for-the-htc-one-s-stock-download/
The SECOND download is the stock one
Unless you change the name of the recovery the command will probably look more like this:
fastboot flash recovery ville_recovery_signed.img
And yes
fastboot oem lock
after you have flashed the stock recovery of course
tivofool said:
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
[/url]
Click to expand...
Click to collapse
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5
tominozh said:
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5
Click to expand...
Click to collapse
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?
Jojo1992 said:
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?
Click to expand...
Click to collapse
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895
tivofool said:
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895
Click to expand...
Click to collapse
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan
Jojo1992 said:
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan
Click to expand...
Click to collapse
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)
tivofool said:
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)
Click to expand...
Click to collapse
ok thank you very much for the help!
ok here's the thing..
i lost my backup for the stock rom which came with my HTC One XL,and i've been facing alot of issues with custom roms ,the major thing was the capacitive buttons stopped working without a reason !
now being S-ON,unable to go back to stock except with RUU's with the matching CID,,ok so i tried searching for the right RUU with matching CID which is J15 and the only one i found on androidRUU website didnt work for me as its a different hboot version (not sure if that's why it refused or not but thats what i understood from reading in the forums)
so i spent hours and hours trying to find the correct RUU with matching CID and hboot version but was invain,,
another option searching for NANDROID,,still didnt find any matching results
tried getting SuperCID to make it easier to find a matching RUU,,but i found in order to get SuperCID i need to be S-OFF,,and in order to get S-OFF i need to get SuperCID first...its a bit frustrating i know
also another weird thing that when i tried to relock the bootloader,it says "FAILED (status read failed (Too many links))"
so any help on how to either :
1.Full stock restore either with a matching RUU or NANDROID
2.Getting a full stock rom with the latest firmware update so that hopefully the capacitive buttons work again..
would be really appreciated
and here are my info :
version: 0.5
version-bootloader: 2.10.0000
version-baseband: 3.12.38.00.24
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
product: evita_utl
platform: HBOOT-8960
modelid: PJ8350000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3848mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b27b8968
hbootpreupdate: 11
gencheckpt: 0
lordofegypt said:
ok here's the thing..
i lost my backup for the stock rom which came with my HTC One XL,and i've been facing alot of issues with custom roms ,the major thing was the capacitive buttons stopped working without a reason !
now being S-ON,unable to go back to stock except with RUU's with the matching CID,,ok so i tried searching for the right RUU with matching CID which is J15 and the only one i found on androidRUU website didnt work for me as its a different hboot version (not sure if that's why it refused or not but thats what i understood from reading in the forums)
so i spent hours and hours trying to find the correct RUU with matching CID and hboot version but was invain,,
another option searching for NANDROID,,still didnt find any matching results
tried getting SuperCID to make it easier to find a matching RUU,,but i found in order to get SuperCID i need to be S-OFF,,and in order to get S-OFF i need to get SuperCID first...its a bit frustrating i know
also another weird thing that when i tried to relock the bootloader,it says "FAILED (status read failed (Too many links))"
so any help on how to either :
1.Full stock restore either with a matching RUU or NANDROID
2.Getting a full stock rom with the latest firmware update so that hopefully the capacitive buttons work again..
would be really appreciated
and here are my info :
version: 0.5
version-bootloader: 2.10.0000
version-baseband: 3.12.38.00.24
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: HT2CNW302531
imei: 354370050060697
product: evita_utl
platform: HBOOT-8960
modelid: PJ8350000
cidnum: HTC__J15
battery-status: good
battery-voltage: 3848mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-b27b8968
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
Long story short, there is no RUU for your CID. But there is a thread in our General Section that contains stock backups for your device.
I'll also just clear up some confusion you seem to have about s-off and SuperCID. There are two s-off methods for the Evita, Facepalm and Rumrunner. Facepalm requires SuperCID to work, Rumrunner does not require SuperCID to work. If you don't have SuperCID and want it you can use the Rumrunner s-off method to get s-off and then change your CID using a fastboot command.
Either way, don't use any of the RUUs that match other CIDs, they'll most likely brick your phone. Just find the thread in General and you'll be able to download a nandroid backup.
Sent from my Evita
timmaaa said:
Long story short, there is no RUU for your CID. But there is a thread in our General Section that contains stock backups for your device.
I'll also just clear up some confusion you seem to have about s-off and SuperCID. There are two s-off methods for the Evita, Facepalm and Rumrunner. Facepalm requires SuperCID to work, Rumrunner does not require SuperCID to work. If you don't have SuperCID and want it you can use the Rumrunner s-off method to get s-off and then change your CID using a fastboot command.
Either way, don't use any of the RUUs that match other CIDs, they'll most likely brick your phone. Just find the thread in General and you'll be able to download a nandroid backup.
Sent from my Evita
Click to expand...
Click to collapse
and concerning that backup you're talking about,,does it have to be matching my CID or any of my details ? or just any backup is fine ?
The backup I'm talking about is specifically for the middle eastern variant of this phone.
Sent from my Evita
timmaaa said:
The backup I'm talking about is specifically for the middle eastern variant of this phone.
Sent from my Evita
Click to expand...
Click to collapse
thx for the help,,ok so currently i found the needed NANDROID,,made the restore and am back to stock android 4.1.1 with relocked bootloader and stock recovery flashed,,i tried searching for software updates and it says no updates found when my neighbor got the same device and he recieved an update for 4.2.2 ??
however am not quite sure if the stock recovery flashed successfully or not ,,in the fastboot it said that the flashing was successful but when i tried to access the recovery from the boot it just went blank screen ,,is that ok and am not supposed to enter the stock recovery but then why it doesnt make the update ? or there's something wrong with the recovery i got ?
You should be able to enter the stock recovery, I believe there's something wrong with the recovery you flashed.
Sent from my Evita
ngiyal 457
timmaaa said:
You should be able to enter the stock recovery, I believe there's something wrong with the recovery you flashed.
Sent from my Evita
Click to expand...
Click to collapse
ok i found the recovery ,flashed it and able to access the recovery nw,,but in order to do so i had to unlock the bootloader again other wise it will just keep on booting into the bootmode which is kinda wierd...
anyway you got any ideas why am unable to receive the OTA ?
I'm not sure why you're not receiving it, sorry. If you can find the OTA you can install it manually.
Sent from my Evita
timmaaa said:
I'm not sure why you're not receiving it, sorry. If you can find the OTA you can install it manually.
Sent from my Evita
Click to expand...
Click to collapse
surprisingly i just got an update for the "people" app through searching for software updates (not through playstore)...does that mean that my OTA is working fine and its just a delay or something like that for the full software,,or this app update has nothing to do with the OTA's ?
The people app itself is separate from the OTA.
Sent from my Evita
j15 version of evite doesn't recieve 4.2.2 update yet
i have the same of your phone and i flashed stock ROM of telstra and it works fine for me
madoooz said:
j15 version of evite doesn't recieve 4.2.2 update yet
i have the same of your phone and i flashed stock ROM of telstra and it works fine for me
Click to expand...
Click to collapse
Could I ask where you got that stock Rom and for a link as well. With a bit of help from lag I managed to factory reset and lose my backup just before I was going to get in on my pc, imagine my excitement. So this would be greatly appreciated.
Thank You
jnthnbgg said:
Could I ask where you got that stock Rom and for a link as well. With a bit of help from lag I managed to factory reset and lose my backup just before I was going to get in on my pc, imagine my excitement. So this would be greatly appreciated.
Thank You
Click to expand...
Click to collapse
Just have a look in our Android Development section, you'll find it in there, along with some great custom ROMs you might want to try.
Sent from my Evita
jnthnbgg said:
Could I ask where you got that stock Rom and for a link as well.
Click to expand...
Click to collapse
All the links you will likely ever need are here:
http://forum.xda-developers.com/showthread.php?t=1671237
jnthnbgg said:
With a bit of help from lag I managed to factory reset and lose my backup just before I was going to get in on my pc, imagine my excitement.
Click to expand...
Click to collapse
Did you factory reset in hboot and corrupt the SD? Because a factory reset in recovery or in the OS should not wipe the SD (including nandroids).
redpoint73 said:
All the links you will likely ever need are here:
http://forum.xda-developers.com/showthread.php?t=1671237
Did you factory reset in hboot and corrupt the SD? Because a factory reset in recovery or in the OS should not wipe the SD (including nandroids).
Click to expand...
Click to collapse
Yes it did it in Hboot of all things while I had Clean Rom installed which was giving me grief (blackscreen after HTC load screen)
jnthnbgg said:
Yes it did it in Hboot of all things while I had Clean Rom installed which was giving me grief (blackscreen after HTC load screen)
Click to expand...
Click to collapse
What are your bootloader details? I might be able to diagnose why you were having problems before the factory reset.
Sent from my Evita
timmaaa said:
What are your bootloader details? I might be able to diagnose why you were having problems before the factory reset.
Sent from my Evita
Click to expand...
Click to collapse
Well I know it is the S-On as I saw even though I was doing all according to the instructions I could find. I had Unlock, SU CID, just could not get that S-OFF. I tried it manually, via the toolkits people have out there, using a 2.0 USB cable. But without the S-OFF I did not get the firmware installed so that was my source of headache with that I just had a bit of lag in the bootloader screen and i click one to many times past recovery and viola up the crick without a canoe lol
Once you have a ROM installed, forget the toolkits and get s-off manually, it's really easy. There are two methods you can try:
Facepalm S-off
Rumrunner S-off
Sent from my Evita
timmaaa said:
Once you have a ROM installed, forget the toolkits and get s-off manually, it's really easy. There are two methods you can try:
Facepalm S-off
Rumrunner S-off
Sent from my Evita
Click to expand...
Click to collapse
So going the route of Palm as I can not get adb to connect but I can fastboot USB, The first attempt ends with FAILED remote:92 supercid! please flush image again immediately. The second attempt ends in FAILED remote:99 unknow fail
You're gonna need to get adb working, both methods require it. I'm in a good mood so I'm gonna give you the solution to the error 99 problem, but please in future search properly before posting, the solution to that problem has been posted dozens of times in the Facepalm thread.
When you get error 99 after flashing the zip, you need to force a reboot to the bootloader and start the process again and you should get error 92 again.
Why isn't adb working? What ROM are you on? Have you updated your drivers? Do you have usb debugging turned on in Developer Options?
Sent from my Evita
Hi everyone. I had maximun HD rom installed and working for several months but, one day my htc one s stars a infinite boot loop. I can enter into Hboot mode but when I try enter into recovery, do clear storage or do a factory reset it just restarts as it does when it try to boot the system.
I tried reflashing the recovery but it had no effect, also tried to reflash the boot.img but the same.
I'm stuck .
firmware info:
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: HT24FW403470
imei: 359902041309034
product: vle
platform: HBOOT-8960
modelid: PJ4011000
cidnum: T-MOB010
battery-status: low
battery-voltage: 3283mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
Thanks for your help n_n
realityrd said:
Hi everyone. I had maximun HD rom installed and working for several months but, one day my htc one s stars a infinite boot loop. I can enter into Hboot mode but when I try enter into recovery, do clear storage or do a factory reset it just restarts as it does when it try to boot the system.
I tried reflashing the recovery but it had no effect, also tried to reflash the boot.img but the same.
I'm stuck .
Thanks for your help n_n
Click to expand...
Click to collapse
May you post your firmware infos? HBOOT version, CID, radio...
LS.xD said:
May you post your firmware infos? HBOOT version, CID, radio...
Click to expand...
Click to collapse
Thanks, I updated the post.
realityrd said:
Thanks, I updated the post.
Click to expand...
Click to collapse
You can flash this firmware update to fix your phone. It will set it back to HBOOT 2.15 and stock radio. Then you can run the stock RUU or flash a new custom recovery + rom
firmware.zip for T-MOB010--> LINK
Here is how to flash it --> GUIDE
You will need to charge your battery first as it has to be at least 30% charged. I'd suggest to charge it to 70% just to be safe.
Sounds like you got the same issue I got last year and only running a RUU fixed it.
LS.xD said:
You can flash this firmware update to fix your phone. It will set it back to HBOOT 2.15 and stock radio. Then you can run the stock RUU or flash a new custom recovery + rom
firmware.zip for T-MOB010--> LINK
Here is how to flash it --> GUIDE
You will need to charge your battery first as it has to be at least 30% charged. I'd suggest to charge it to 70% just to be safe.
Click to expand...
Click to collapse
I'll try as soon as I charge the phone, I'm having difficulties doing that. Thanks n_n
LS.xD said:
You can flash this firmware update to fix your phone. It will set it back to HBOOT 2.15 and stock radio. Then you can run the stock RUU or flash a new custom recovery + rom
firmware.zip for T-MOB010--> LINK
Here is how to flash it --> GUIDE
You will need to charge your battery first as it has to be at least 30% charged. I'd suggest to charge it to 70% just to be safe.
Click to expand...
Click to collapse
I have flashed the the firmware but I'm still unable to go into recovery mode :crying:
realityrd said:
I have flashed the the firmware but I'm still unable to go into recovery mode :crying:
Click to expand...
Click to collapse
I assume you can get into the boot loader. Maybe lock the boot loader and run the RUU to get back to stock. Someone else chime in if you have better suggestions please.
realityrd said:
I have flashed the the firmware but I'm still unable to go into recovery mode :crying:
Click to expand...
Click to collapse
Did you perform "factory reset / clear storage" in bootloader mode before you installed the custom recovery again?
808phone said:
I assume you can get into the boot loader. Maybe lock the boot loader and run the RUU to get back to stock. Someone else chime in if you have better suggestions please.
Click to expand...
Click to collapse
Already did, I had the very same thing happen to me.
LS.xD said:
Did you perform "factory reset / clear storage" in bootloader mode before you installed the custom recovery again?
Click to expand...
Click to collapse
It doesn't matter what you do only RUU will fix this.
LS.xD said:
Did you perform "factory reset / clear storage" in bootloader mode before you installed the custom recovery again?
Click to expand...
Click to collapse
nope, I just followed the guide
Darknites said:
Already did, I had the very same thing happen to me.
It doesn't matter what you do only RUU will fix this.
Click to expand...
Click to collapse
How i can know what is my correct RUU file. I have S-off (does It matter?)
realityrd said:
How i can know what is my correct RUU file. I have S-off (does It matter?)
Click to expand...
Click to collapse
OK, now I could be wrong but you being S-OFF means you can install any RUU. But obviously I would install one that matches the country/carrier and processor.
realityrd said:
How i can know what is my correct RUU file. I have S-off (does It matter?)
Click to expand...
Click to collapse
Any will do since you got S-Off.
realityrd said:
How i can know what is my correct RUU file. I have S-off (does It matter?)
Click to expand...
Click to collapse
This is the matching RUU for taking your phone back to full stock --> LINK
You probably will need to flash the included recovery before you run the RUU.
LS.xD said:
This is the matching RUU for taking your phone back to full stock --> LINK
You probably will need to flash the included recovery before you run the RUU.
Click to expand...
Click to collapse
Include recovery? You mean the stock recovery?
Thanks n_n
Don't Flash CWM Latest.
Guys Don't flash CWM Lastest Version from its website. It doesn't work. Try TWRP 2.4 or above.
Jnanadarshan said:
Guys Don't flash CWM Lastest Version from its website. It doesn't work. Try TWRP 2.4 or above.
Click to expand...
Click to collapse
Which recovery version doesn't work?
6.0.4.6
LS.xD said:
Which recovery version doesn't work?
Click to expand...
Click to collapse
Version 6.0.4.6 Doesn't work.
Jnanadarshan said:
Version 6.0.4.6 Doesn't work.
Click to expand...
Click to collapse
At all? Or for specific roms?
Hi everyone! Have a big problem with wife's HTC ONE SV K2UL. In the start he has official last ROM with no root, s-off and other things. In one fine day he starts work with a tons of lag's, restarts after boot and write message about “System force close”. I read many post's here and other forum and try to upgrade to custom firmware. Yes, of course I do unlock and flash TWPR, can't s-off cos don't have stable working firmware, try to write SuperSId, but w/o root it didn't work. Then I try different rom's: viper, simple etc (yes, I flash with "fastboot flash boot boot.img", cos S-ON) But every time have the same problem with lags and restarts. Try to flash RUU, but have errors: "12 signature verify fail", when boot lock and "99 signature failed" when tempered or unlock. In the end I try to use SimpleRom v4 with mod f2fs. It's starts, but haven't root, say that he lost binaries. Try to CHMOD 755 System folder, use TWPR to flash different *.zip with SuperSU and SuperUser, but the path /system/bin/su /system/bin/.ext/.su /system/xbin/su are empry anyway.
Now have: Unlock (TEMPERED), TWRP 2.7.1.1 (f2fs), HBOOT 2.00, S-ON, NO supercid, SimpleROM v4 + f2fs, NO root.
It's also restarts and don't work properly. What method's I can try to restore my fully worked HTC One SV.
P.s Sorry for my bad Eng and thx a lot for helping.
I would try a stock rom first!
SimpleROM is highly modded. Give this one a try. Moonshine S-off should also work with it.
To think about other steps we need more information.
Connect your phone with fastboot and type into the cmd:
Code:
fastboot getvar all
Put the output here (except your IMEI & Serial number)
And maby explain your restart (after reboot?) issue a bit more detailed.
old.splatterhand said:
Code:
fastboot getvar all
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0000
(bootloader) version-baseband: 1.18.40a.00.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: k2_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8010000
(bootloader) cidnum: HTC__A07
(bootloader) battery-status: good
(bootloader) battery-voltage: 3818mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Today I will try to flash ROM from your link. Thx.
Yes, flash it and see how it works. If your problems are still there, you should try moonshine to get S-off. Then you should be able to downgrade hboot and run the RUU.
After installation official rom from link I have message:
"Setup isnt't responding. Do you want to close it?"
"Process system isn't responding. "
After boot, when I try to move circle for unlock phone, i see green HTC on white and after some second's it's restarts. Can't do anything.
P.s Lock screen also be on black pole (
Never had such message.
Have ypu done already the update to 4.2.2?
I would try another rom to noot, but if all get such problems, i think it is the phone itself.
Usually the roms which are released, don't have such big problems and if they really have, devs are working on a solution.
Hi there!
Any news related to the problem? I have exactly the same problem (problem show up after doing factory reset, before that almost a year past by using it with absolutely no problems, of course didnt perform factory reset before, rom was stock 4.1.2, CID htc_032)HTC one SV k2ul stuck at htc logo, able to enter bootloader, unlocked at HTCdev, flash TWRP, tryed several roms (flash over recovery, flash boot.img with fastboot, wipe cash...cose I am S-on). First time it boot up OK (everything is working), but after turning it off, and power it back on, it stuck at lock screen. When unlock it show white htc screen, and after a while show "system not responding.......". Sometimes factory reset over recovery bring the phone up, working normaly (sometimes), but if no luck with factory reset, only thing is flash again rom and it work...until next reboot (what is needed for S-off). Im on k2ul_JB_2.14.401.6_stock_odexed_03_06_13 , and I have tryed Saturn III v1.20 (after first boot all OK, day after mobile data not working, boot problem same like rom mentioned before) and k2ul_4.2.2_3.11.401.1_stock_odexed_v3 (booting problem less expressed, booting normaly after "power down" with power button, stuck only after rebooting from adb, sound while calling heavily distorted....).
So, any idea what went terribly wrong after factory reset??? Why the system is not responding after reboot (what is blocking it, or where is gone???) And, how to fix distorted in call sound on 4.2.2. rom with S-on, and no superCID?
Please help me get my HTC working normally!
thx in advance
To update firmware to the newest do the following:
- relock your bootloader
- download this http://fotadl.htc.com/OTA_K2_UL_JB4...2.14.401.6_release_338297mseg08soslxcubit.zip and extract firmware.zip to your pc.
- rename firmware.zip to PL80IMG.zip and copy to your ext sdcard
- boot to bootloader and confirm to flash with vol+
- reboot to fastboot mode and unlock your bootloader (usually you can use the unlock token from first time)
After firmware has flashed, you have no TWRP anymore and your old rom will not boot.
So, best is to download a 4.2.2 rom for your device and copy to you sdcard before.
And also grab the latest (!) TWRP from my index thread, because you need to flash this right after firmware in fastboot mode.
Hi there!
First, thank you for your answer!
so, I have to:
-relock bootloader (enter bootloader, fastboot, open adb, fastboot oem lock)
-extract firmware, rename to PL80IMG.zip, put on sd, reboot to bootloader (I have try once to downgrade hboot with PL80IMG, but it didnt ask vol+ to confirm, blue vertical bar in right corner filled up and bootloader starts, is that OK, or not, I mean, not asking vol+ to confirm?)
-unlock bootloader, flash TWRP recovery
-go in recovery (perform any wipe?), install from sd (perform any wipe after install finish?)
-what after instaling rom from recovery? I am S-on, do I need to take out of rom boot.img file, go to fastboot, and flash again boot.img?
thx in advance
The answer is inside the quote:
1vanK said:
Hi there!
First, thank you for your answer!
so, I have to:
-relock bootloader (enter bootloader, fastboot, open adb, fastboot oem lock) Lets say: open cmd, not adb. But i think you mean the right step.
-extract firmware, rename to PL80IMG.zip, put on sd, reboot to bootloader (I have try once to downgrade hboot with PL80IMG, but it didnt ask vol+ to confirm, blue vertical bar in right corner filled up and bootloader starts, is that OK, or not, I mean, not asking vol+ to confirm?) Downgrade hboot is not possible with S-on, maybe that was the reason. Usually it asks to confirm, but if not it should be ok also. It is no modded file, it is firmware by HTC.
-unlock bootloader, flash TWRP recovery
-go in recovery (perform any wipe?), install from sd (perform any wipe after install finish?) Only wipe before, not after. A backup before the wipe does not hurt also.
-what after instaling rom from recovery? I am S-on, do I need to take out of rom boot.img file, go to fastboot, and flash again boot.img? The boot.img is inside the firmware.zip. It depends on the updater script of the rom you are using. Some wipe the partition with boot.img, some not. Try first without, if phone does not boot, flash boot.img.
thx in advance
Click to expand...
Click to collapse
All depends that you have an k2ul and the cid matches the android-info.txt inside of firmware.zip!
Hi,
right after flashing PL80IMG you provided everything start to work ok :good: ! Even rom that was currently on (4.1.2) reboots ok (didnt stuck like before). But, no matter what, I carried out all steps from previous post, an I am now on 4.2.2, and all is so far running great (try to reboot several times, with power button, from fastboot, from recovery,factory reset... didn stuck at htc screen at all, and no distorted sound during calls)! Thank You so much!!!
Any way, even "so far so good", I wonder, what was wrong? Why everything crashed last time after factory reser (on stock, no root, locked)?
I guess there is no way to get superCID on 4.2.2? What about S-off?
Thank you very much on provided link! :good:
Great news. Happy to help!
What was wrong, hard to tell, if we don't have your device here.
You can get S-off with http://rumrunner.us then Supercid.
old.splatterhand said:
Never had such message.
Have ypu done already the update to 4.2.2?
I would try another rom to noot, but if all get such problems, i think it is the phone itself.
Usually the roms which are released, don't have such big problems and if they really have, devs are working on a solution.
Click to expand...
Click to collapse
Yeah, on start i have full stock rom 4.2.2, now have ROM from your link. This message's be in all rom's which i flash to my htc.
MakOS said:
Yeah, on start i have full stock rom 4.2.2, now have ROM from your link. This message's be in all rom's which i flash to my htc.
Click to expand...
Click to collapse
It is important to use the firmware from the OTA update with the rom version, means: if you want to use a 4.2.2 rom, you need the firmware from 4.2.2.
If you want to use a 4.1.2 rom you need the firmware. So please don't mix that.
Have you already done (some time ago) the OTA update to 4.2.2?
I would be no surprise, if you use 4.2.2 rom on 4.1.2 firmware and you get errors.
old.splatterhand said:
It is important to use the firmware from the OTA update with the rom version, means: if you want to use a 4.2.2 rom, you need the firmware from 4.2.2.
If you want to use a 4.1.2 rom you need the firmware. So please don't mix that.
Have you already done (some time ago) the OTA update to 4.2.2?
I would be no surprise, if you use 4.2.2 rom on 4.1.2 firmware and you get errors.
Click to expand...
Click to collapse
Yes, on start it have 4.2.2 OTA update. But i try to flash 4.2.2, 4.2.1, 4.1, try all link, but anyway have the same message's. Want any stable w/o error's firmware, cos now it not work properly ((
Hi there,
so now i have managed some how (I don`t know how) to brick my one sv. I was moving TWRP folder with backup files from PC to phone internal storage, got ext4 error, and phone just died... no lights on charge, no bootloader, nothing.......
When I reconnect USB it is detected as QHSUSB_DLOAD device, so that indicates that there is no more bootloader... I was reading that this is fixable (without jtag box), there was explanations how to do it for sensation, and M7, but there is nothing for ONE sv...
Can U help me with advice??? How to get bootloader back on rolling???
THX in advance!!!
Sorry, no idea. If you have guides for other phones you should look there, i guess.
Hello. I am not sure if I am the only one with this issue but here it is.
I have a Verizon HTC One M8. Here is the condition:
NOT rooted
NO OS installed
Stock recovery installed (Can't flash a custom recovery)
S-ON
LOCKED bootloader
Here is some other useful information:
HBoot-3.19.0.0000
Radio-1.14.20.0930
OS-6.21.605.3
Okay, so it is very possible that there is no hope for this phone, but I still feel like there could be. In the state that it is in, I have assumed that I could just flash an RUU so that I would return to stock. This wouldn't work. Every time I would try to flash it through fastboot on the device, I would get part of the way through flashing and then it would say:
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
I have been told that this could mean that the that I have downloaded is possibly corrupt. This seems to not be the case as I have tried downloading it 3 different times. I have also checked the MD5 and they match. I have also tried flashing the RUU by using the executable version. This as well doesn't work. When I try to flash, It gets near to the end of the process and then fails with the error [132] stating that I need to find a RUU that matches my firmware (You can see this in the video linked below). The problem with this is that the RUU that I am using seems to match my firmware. Here is a copy of the txt document that is located within the rom for the RUU.
DelUserData:0
modelid: 0P6B20000
cidnum: VZW__001
mainver: 6.21.605.3
btype:1
aareport:1
hbootpreupdate:12
DelCache:1
DelFrp:1
Seeing the mainver number leads me to believe that this will work on my device. Feel free to link me to the proper RUU if this is wrong.
One other problem is that in order to install a recovery, I need access to adb. I don't have access to adb as I can't turn on USB Debugging because my device doesn't have a OS installed on it. If you have any suggestions or solutions to my problem, please let me know! Thanks!
Here is the link to the video of the RUU error: https://www.youtube.com/watch?v=9aKecZuhWl0&authuser=0
This error happens when attempting to flash RUU through executable file.
Cozmikk said:
Hello. I am not sure if I am the only one with this issue but here it is.
I have a Verizon HTC One M8. Here is the condition:
NOT rooted
NO OS installed
Stock recovery installed (Can't flash a custom recovery)
S-ON
LOCKED bootloader
Here is some other useful information:
HBoot-3.19.0.0000
Radio-1.14.20.0930
OS-6.21.605.3
Okay, so it is very possible that there is no hope for this phone, but I still feel like there could be. In the state that it is in, I have assumed that I could just flash an RUU so that I would return to stock. This wouldn't work. Every time I would try to flash it through fastboot on the device, I would get part of the way through flashing and then it would say:
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
I have been told that this could mean that the that I have downloaded is possibly corrupt. This seems to not be the case as I have tried downloading it 3 different times. I have also checked the MD5 and they match. I have also tried flashing the RUU by using the executable version. This as well doesn't work. When I try to flash, It gets near to the end of the process and then fails with the error [132] stating that I need to find a RUU that matches my firmware (You can see this in the video linked below). The problem with this is that the RUU that I am using seems to match my firmware. Here is a copy of the txt document that is located within the rom for the RUU.
DelUserData:0
modelid: 0P6B20000
cidnum: VZW__001
mainver: 6.21.605.3
btype:1
aareport:1
hbootpreupdate:12
DelCache:1
DelFrp:1
Seeing the mainver number leads me to believe that this will work on my device. Feel free to link me to the proper RUU if this is wrong.
One other problem is that in order to install a recovery, I need access to adb. I don't have access to adb as I can't turn on USB Debugging because my device doesn't have a OS installed on it. If you have any suggestions or solutions to my problem, please let me know! Thanks!
Here is the link to the video of the RUU error: https://www.youtube.com/watch?v=9aKecZuhWl0&authuser=0
This error happens when attempting to flash RUU through executable file.
Click to expand...
Click to collapse
Do you have an SD-Card?
I find the best way to do an RUU is using the SD-Card. Very safe, as power could turn off or something.
EDIT: I see in the video you tried that.
Sorry. :-/
more RUU's to try?
https://www.androidfilehost.com/?fid=24438995911975667
https://www.androidfilehost.com/?fid=24052804347813946
andybones said:
Do you have an SD-Card?
I find the best way to do an RUU is using the SD-Card. Very safe, as power could turn off or something.
EDIT: I see in the video you tried that.
Sorry. :-/
more RUU's to try?
https://www.androidfilehost.com/?fid=24438995911975667
https://www.androidfilehost.com/?fid=24052804347813946
Click to expand...
Click to collapse
I have already tried the android 6.0 RUU. I can't try the 5.0.1 RUU because I don't have S-Off and I am already on the 6.0 firmware and can't downgrade.
Cozmikk said:
I have already tried the android 6.0 RUU. I can't try the 5.0.1 RUU because I don't have S-Off and I am already on the 6.0 firmware and can't downgrade.
Click to expand...
Click to collapse
Wish I could be of help.
andybones said:
Wish I could be of help.
Click to expand...
Click to collapse
Its okay. I am talking to someone right now who should be able to help me with javacard or something near to it so I can at least get s-off.
Cozmikk said:
Its okay. I am talking to someone right now who should be able to help me with javacard or something near to it so I can at least get s-off.
Click to expand...
Click to collapse
Glad to hear. :good:
Hey did you find a solution? I have pretty much the same problem (Except, I do have S-OFF, but I relocked my bootloader so I still can't flash a custom recovery...)
MSFTGhoul said:
Hey did you find a solution? I have pretty much the same problem (Except, I do have S-OFF, but I relocked my bootloader so I still can't flash a custom recovery...)
Click to expand...
Click to collapse
You can. I have posted ruu mode custom firmware zips that have twrp included just for this scenario. Then you can unlock the bootloader. Your scenario is not at all the same as the above.
Sent from my HTC6545LVW using Tapatalk