Deodex & Zipaligned firmware 18.3.1.C.0.21 Kitkat 4.4.4 for D2303
FEATURES:
Deodex
Zipaligned
INSTRUCTIONS:
Go to recovery
Wipe data/factory reset
Flash zip
Reboot
DOWNLOAD:
deodex_install.zip http://d-h.st/LuE 387.43 MB Dev-Host
deodex_install.zip https://mega.co.nz/#!ppUnyCIT!3_UOCD8ZZ068fX5LMeK22iaaDDU9z00P69vClu68I3o 387.43 MB Mega
ADD-on:
Services.jar with superuser mod http://d-h.st/mmjF 1.42 MB Dev-host
CREDIT:
AndroPlus
as I install it?services.jar?
For install services.jar copy to system/framework anbd set permision ..or copy to deodex_install.zip in system/framework and flash
Screenshots?
but for that you have to be root. and I can not be root if I do not change the kernel.
that of 4.4.4 makes me brick the phone. and what I tried 4 times and 4 times not pass the sony logo
as you 've done ?
alba46d said:
but for that you have to be root. and I can not be root if I do not change the kernel.
that of 4.4.4 makes me brick the phone. and what I tried 4 times and 4 times not pass the sony logo
as you 've done ?
Click to expand...
Click to collapse
Flash kernel with cmw for 4.4.2.. Go to in cmw , flash this zip and flash stock kernel for 4.4.4
Thank you full work!!!:thumbup::thumbup:
please share for D2302 also
Give me link for firmware for D2302
So heres what i did.I installed the rom in CWM with locked bootloader and im stuck at sony logo i can go back into the recovery but i cant pass the sony logo.Any infos ?
So heres what i did.I installed the rom in CWM with locked bootloader and im stuck at sony logo....
Click to expand...
Click to collapse
buddy, you need to have an unlocked bootloader to flash this ROM
gogobaba said:
So heres what i did.I installed the rom in CWM with locked bootloader and im stuck at sony logo i can go back into the recovery but i cant pass the sony logo.Any infos ?
Click to expand...
Click to collapse
And how did you get bootloop? I've already installed this few times on locked bootloader with cwm for LB and it is working fine. Go read my thread how to flash in 4.4. Also make sure you got the LATEST firmware 4.4.4(18.3.1.C.0.21).
krzycho26 said:
buddy, you need to have an unlocked bootloader to flash this ROM
Click to expand...
Click to collapse
That's not true. I've already installed this few times on locked bootloader.
Link
Link for D2302 dual http://firmwaremobile.com/index.php/xperiadownload/file/276-m2-dual
or
https://mega.co.nz/#!CcxQlCoR!iegdoeosKhJK7PJdLGKLwhytyIXjNz5VYOdi38Qpj2o
krzycho26 said:
buddy, you need to have an unlocked bootloader to flash this ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/xperia-m2/development/d2303-clockworkmod-6-0-4-6-t3011821/page2
read #17 and the last part plz
Help
I try to install it. First i make wipe data, then flash zip and at the end wipe cash/dalvik. It boots without bootlop but when it boot there is no black home screen, only navigation and status bar appears, but i can't enter in settings, also there is no network.
do i need to flas 0.21? or juust flash this? amine is 1.13 thanks
This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!AYJjzA6S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.
Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE
Reserved
Reserved
adagiov said:
Reserved
Click to expand...
Click to collapse
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!
Gargoyles said:
Thanks for your effort! :good: i`m not able to download at the moment but sounds promising!
Click to expand...
Click to collapse
You can download the Baiduyun Application to downlad the related files. Problem might occur because it is a Chinese skydrive. And I will upload to other skydrive if Baiduyun skydirve does not work.
Please advise specific skydrive if you know.
Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo
mvstark98 said:
Hey thread, when i flash i9505 rom, reboot and it stop in Docomo logo and then it automatic reboot to recovery, i can't go to the mainscreen, i can't pass the bootscreen Docomo
Click to expand...
Click to collapse
try to enter in recovery and wipe cache and data.
Thank you so much for this post.
I have managed to update to Omega V40 on my sc-04e.
And I am able to use spmode, camera and wifi.
adagiov said:
Please Leave your problem or feedback below.
Click to expand...
Click to collapse
fix link,please,thank u
verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry, I have no idea what else link is available to both you and me.
verticsss said:
fix link,please,thank u
Click to expand...
Click to collapse
Sorry for the late reply, I tried to fix the link via Mega.
Hi,i would really appreciate it if you could just spare some few minutes of your time to help me out with my phone.
So I bought this barely used Samsung Galaxy S4 (i9505) from a guy. It came with android 4.2.2 and a boatloader/Baseband of SC04E0MUAMG2 and when I boot on it shows ntt-DoCoMo before booting up (so am guessing it was locked before, it came unlocked because every SIM I have tried has worked, and also it came rooted).
The issue is I really want to upgrade to Stock Lollipop or a custom lollipop rom like Aurora or Albe95 roms, but each time I try flashing a stock rom using Odin, it says fail (usually its when it gets to ' NAND write start, Auth fail '). Since Stock refused working I decided to try Flashing a custom rom using a custom recovery, it flashed successfully but when I tried flashing the modem and boatloader for the custom Rom, Odin would show fail again, I tried if on every port on my system and even unticked F.reset and auto-reset, but the result was still fail.
So I bought mobile odin pro to try out the stock again, it did install the stock but it was buggy, camera wasn't working, Mic wasn't working, the back button wasn't working. I just had to remove it. Currently am on Imperium 12.1 custom Rom( i installed it because it didn't require flashing modem and boatloader. The only problem is camera and Mic still won't work on this rom, but when I go back to the backed-up android 4.2.2 everything works fine. So yeah, that's my predicament. I am clueless as to what to do next so please help me out. I would really like to use a stock or custom Rom.
Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.
adagiov said:
Flash custom touchwiz 5.0.1 Rom on sc04e
1 Update the Stock Rom to the lastest lollipop version:SC04EOMUGOI4
2. Make sure the soft-key can work. (if not, please refer to this post to solve the problem)
3. Flash Recovery. (CWM Recovery or Philz Recovery is recommended.)
4. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
5. Flash the custom touchwiz rom via cwm recovery, be aware of its version at 5.0.1 i.e Albe95 LolliROM 6.0 DEODEX & ODEX
6. Flash the Kernal for 5.0.1 in cwm recovery.
7. Reboot and Enjoy it.
Download
SC04EOMUGOI4 Link: https://mega.nz/#!hEZ3kQoT!UDugAgYis-NtshJorGu9slTDzACbR6EQPCf9vjrXeZg
Albe95 LolliROM 6.0 DEODEX & ODEX Link:https://mega.nz/#!KoRATJoK!1iXg0-hWGimgimWkvTIOzVjcP6bXyzxGSb0lmMQ_-RI
Kernal for 5.0.1 Link: https://mega.nz/#!wV5CWTxR!qXbJP2SOkjQgyn8izCL4OTo4RBqUi4nMGA-3_ebJ9OE
Click to expand...
Click to collapse
hefp: kernel SC-04E for miui 4.4.2 ?????
DaveHert said:
Am having a bit of an issue here, I followed the steps listed here to install a custom lollipop rom, I finally got my camera and microphone working after I flashed that Laneham but my wifi (which was working with the custom rom before) is refusing to work now. It won't come on. Is there any solution for that? Have tried doing a data reset and wiping my internal memory but to no avail.
Click to expand...
Click to collapse
If you want to use stock lollipop rom, you have to flash the lastest offical rom(SC04EOMUGOI4 ).
First, you flash the stock rom, you will find everything works well except back and menu button. If you have other problem(eg. wifi does not work), you may try flash the stock rom again.
Second, fix the back and menu button problem. You can find solution here.
Then, you can enjoy the stock lollipop rom.
If you want you try other custom rom based on lollipop rom. Please follow this post.
And you have mentioned, your odin did not work via PC, sometimes it is caused by usb cable. You can try with a replaced cable, buy one or two repalced usb calbe, and usually it will help you solve the problem.
If repalced usb cable can not work, you can try with other computers.
dunglt said:
hefp: kernel SC-04E for miui 4.4.2 ?????
Click to expand...
Click to collapse
Here is the Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
adagiov said:
This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!4JQQkT4S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.
Click to expand...
Click to collapse
Help: I need kernel miui v7 for sc-04e
adagiov said:
This is a guide helping you install custom 9505 rom on SC-04E with android 4.42. Also it can be applied in 5.0.1 on level 2.
Through this thread, you can flash Omega, Echoe,MIUI or other 9505 roms.
Reason:
The SC-04E has almost the same driver as 9505 international version. The camera does not work when flashing any custom 9505(internal) rom.
However, we could flash the SC-04E keneral after flashing 9505. I have tried ten more 9505 rom, and succeed to flash the 9505 rom. Everything works perfect, including the camera and wifi.
All you need:
1. SC-04E mobile phone
2. Computer with Sumung driver
3. Flashing software odin 3.10
4.Stock Official 4.42 OB2 Rom
5.Custom Recovery
6.Custom 9505 Rom
7. SC-04E Keneral 4.42 OB2
Step:
1 Update the Stock Rom to the lastest 4.42 OB2 version.
2. Flash Recovery.
CWM Recovery or Philz Recovery is recommended.
3. Boot to recovery, Wpie date/factory reset, Wipe cache, advance-wipel dalvik cache.
4. Install zip from sdcard or sdcard1, select your downloaded 9505 custom rom and install.
5. After flashing the 9505 custom rom, boot to recovery
6. Install zip, select SC-04E Keneral OB2
7. Reboot and Enjoy it.
Download:
Official rom download:
http://samsung-updates.com/device/?id=SC-04e
Or http://pan.baidu.com/s/1o6FXrmE
Or https://mega.nz/#!QNBknKwC!vMXtp9go-qrePcGX2IpChS-NX0bLW0U0HbEqxsImkPg
Cwm recovery:
http://pan.baidu.com/s/1sjLWNq1
Or https://mega.nz/#!4JQQkT4S!FB5tkXm_Ll1wl4mOoVekCghHq-yYYgMHvwfUoSL2Bts
9505 Rom: (Here I just list Omega V40 for reference, you can download other rom from xda)
Omega V40
http://pan.baidu.com/s/1sjzChVf
Or http://goo.gl/dgy7xL
Kerenal 4.42 ob2
http://pan.baidu.com/s/1jGH1v4i
Or https://mega.nz/#!ldpikbSI!2Dbo6c8XEMfHvYELVoM5tfID81C7bYIML_STkRksrZg
If you have another problem when flash 9505 rom on SC-04E, Please leave the message in this thead.
Click to expand...
Click to collapse
Mind you; Give me the kernel of SC-04E S4- v7 for MIUI 6.3.29 Kernel OB2 because I used the boot up on the all-black, wait 30 minutes still applies.
thanks a lot.
vitnamese fixed rom 4.4.2 is here password is 0915710079
http://4share.vn/f/7a494f484a4b434b/affiliate/2021884
problem is i cannot download this file, if some one can please let me know
HELP
hey brothers , can you help me to use xposed in my sc-04e docomo in 5.0.1 albe rom ?
and any one use docomo sc04e can use NFC ? tq. regards
I recently bought my Xperia Z3 and after a few weeks I installed CM 12.1. Not that I regret it, but I miss the camera features of the stock Xperia ROM. I am new to all thi Sony stuff (coming from an HTC). On my old HTCs I just needed to flash a zip and voila! However, here you need to flash a .tft file and etc. Can someone explain me what to do step-by-step?
install latest flashtool..install required drivers from drivers folder..
download stock ftf file from here->http://forum.xda-developers.com/z3/general/ftf-stock-firmwares-xperia-z3-models-t2886061
place that ftf file in firmwares folder in flashtool..
now open flashtool..click the flash icon and select flash mode..select the ftf..check wipe data,cache
switch off your phone..connect it to your pc by holding the volume down button..your phone will be connected in flashmode then
the firmware will be flashed..and you are done!
ghostzz said:
install latest flashtool..install required drivers from drivers folder..
download stock ftf file from here->http://forum.xda-developers.com/z3/general/ftf-stock-firmwares-xperia-z3-models-t2886061
place that ftf file in firmwares folder in flashtool..
now open flashtool..click the flash icon and select flash mode..select the ftf..check wipe data,cache
switch off your phone..connect it to your pc by holding the volume down button..your phone will be connected in flashmode then
the firmware will be flashed..and you are done!
Click to expand...
Click to collapse
Could you also tell if it's possible to go back to stock ROM from CM 12.1 on NOTE 3 SM-N9005? If yes, how? Please.
Download stock rom and flash tool for ur device and flash stock rom search for flash tool that supports your device