Database Info

Bricked my Tipo

Hello everyone.Last month i bought a new tipo dual.i wanted to flash new jellybean rom for it.i mistakely bricked it.It's batterty is low now.Its flashing for 3 times now.What should i do now?.I am confused please help me out.

Varun paul59 said:
Hello everyone.Last month i bought a new tipo dual.i wanted to flash new jellybean rom for it.i mistakely bricked it.It's batterty is low now.Its flashing for 3 times now.What should i do now?.I am confused please help me out.
Click to expand...
Click to collapse
When you say it was flashing 3 times, do you mean those flashes failed?
Please re-charge your phone, try flashing again and post the log output of the flashing here, then we'll have another look to what's wrong.

you'll need to reflash stock ftf, unlock bootloader and flash a jb kernel, then install jb roms
Sent from my ST21i using Tapatalk 2

Answer - Little Brick
Hello! I have a solution to come back to original ROM!
Preparation
1. Download Flashtool
1.1 http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/​2. Go to: C:\Flashtool\drivers (If you have install flashtool in the default directory)
2.1 Run Flashtool-Drivers
2.2 Select your phone. If you don’t know, Select all.​
3. Dowload your FTF for your xperia phone
3.1 For Tipo, Tipo dual, miro and J:
3.2 Go in this page:
3.2.1 http://forum.xda-developers.com/showthread.php?t=2033401
3.2.2 Section “Stock Firmwares”
3.2.3 Select your phone.​
Explication with flashtool.
4. Flashtool
4.1 Put your ftf file in directory: C:/flashtool/firewares
4.2 Run flashtool
4.2.1 Click on the lightning button (Flash)
4.2.2 Select Flashmod
4.2.3 Select your ftf file
4.2.4 Select "Exlure TA"
4.2.5 Click Ok​
Put your phone in Flashmod:
5. FlashMod
5.1 Disconnected your phone from your computer
5.2 Put your phone off
5.3 Push 3s in vol - (for xperia tipo only, don’t know for oser xperia phone)
5.4 Plug your phone to your computer with pushing vol - button!
5.5 If it’s work, your led going to be green.
5.6 Now flashtool will be install your ftf file one your phone.
5.7 When it’s finished, you have to reboot.
5.8 And you are going to boot in your basic ROM !​
Sorry for my bad English ^^
Thanks to ToledoJab
http://forum.xda-developers.com/showthread.php?t=1849170

[Q] getting old stock rom?

I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.

vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Depends.
If you want to completely revert to factory settings (that means removing CWM recovery too) then use ODIN method.
If you wish to flash other roms in future then I suggest you to flash pure stock roms by Raj Joshi from android developement section.
Simply flash those like normal roms through recovery.
Tip: Flash CM7,miniCm7 and their derivatives for better performance. Stock roms are always laggy. (atleast for me)

Procedure and Happy Flashing
vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Hi @vikrantnegi007,
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9278/S5670DDKT3_S5670ODDKT2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion.in/software/download-odin-rooting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.

[Q] How To Flash experimental kernel U 12

I am trying to install custom Rom on my xperia u
i have everything which i need to do anything like root unroot CWM RecoverX flashtool
but i don't know how to flash experimental kernal U 12 bcoz in the zip does not contain any .inf or .sin and .elf file only a boot image and nothing is in boot image i also extracted it how i can flash pls tell whole steps the kernal is attached have a look
pls fast i have too install JB in my xperia U

avigeek said:
I am trying to install custom Rom on my xperia u
i have everything which i need to do anything like root unroot CWM RecoverX flashtool
but i don't know how to flash experimental kernal U 12 bcoz in the zip does not contain any .inf or .sin and .elf file only a boot image and nothing is in boot image i also extracted it how i can flash pls tell whole steps the kernal is attached have a look
pls fast i have too install JB in my xperia U
Click to expand...
Click to collapse
boot.img is flashable via fastboot // zip is flashable via custom recovery
Make sure that your rom supports this kernel.

[Q] update to lollipop

guys i have stock 4.2.2 rooted with cwm recovery can anyone provide me proper instructions to flash 5.0 lollipop???

balaaje said:
guys i have stock 4.2.2 rooted with cwm recovery can anyone provide me proper instructions to flash 5.0 lollipop???
Click to expand...
Click to collapse
1)root (optional)
2)take backups (optional)
3)unlock bootloader by flashtool
4) dl cm12 beta 3.. extract it.. there will be a boot.img
5) flash that thru flashtool
6) go into recovery .. do not let d phone boot cos it wont (press vol down 5 to 7 times after sony logo)
7) wipe and format> clean to install a new rom
8) flash rom
9) flash lollipop gapps
for flashtool see guide in xperia l general
HIT THANKS IF I HELPED

[Q] From CM12 to new Lollipop Stock

Hey guys,
Im having problem to revert from CM12 to new Lollipop-version or Stock in general. When I try to flash with flashtool the package a get an error message that it can´t open the bundle.
Im sure this is an common problem but I have tried almost everything but it wont work. I got an CM-based recovery (never seen it before, its not like CWM). I have all the necessary drivers and I using an win 7 computer.
Any idea? Should I try to flash an ordinary cwm and then try to flash stock firmware again?
I have also backed up my DRM-keys, any good with them? I have unlocked bootloader and of course rooted device.
Could really use some help right now

restore to .93, root with giefroot, restore keys, reboot and flash lollipop. if you want root, flash a lollipop zip which you can find somewhere around here.

kuboweb said:
restore to .93, root with giefroot, restore keys, reboot and flash lollipop. if you want root, flash a lollipop zip which you can find somewhere around here.
Click to expand...
Click to collapse
Restore to .93? How can I restore key? Right now its just matters with the stock firmware, root comes later

You can flash the stock pre-rooted ZIP from Android Development Section through your recovery instead of using flashtool. You won't have to go through the whole rooting process again. If the CM recovery is failing, flash/replace it with TWRP/CWM/xZDualrecovery (tutorials are in their respective threads).
If you want to use your DRM keys, relock your bootloader (after flashing a stock (based) ROM) and restore them with the tool you used for backing them up. You will regain all the functionality.
Did you try different .ftf files with flashtool?

Omario-242 said:
You can flash the stock pre-rooted ZIP from Android Development Section through your recovery instead of using flashtool. You won't have to go through the whole rooting process again. If the CM recovery is failing, flash/replace it with TWRP/CWM/xZDualrecovery (tutorials are in their respective threads).
If you want to use your DRM keys, relock your bootloader (after flashing a stock (based) ROM) and restore them with the tool you used for backing them up. You will regain all the functionality.
Click to expand...
Click to collapse
Awesome! I will try it! Thanks man!

Got a huge problem!
I tried to flash over with Flashable stock 23.1.A.0.690 (5.0.2) pre-rooted with XZ dualrecovery but it didnt work. I got an Cyanogen recovery so I removed it and replaced it with cwm instead but now I have no OS at all and I really need help to get stock again
Edit: When I try to flash the stock fw I get this error message: "Cannot open bundle. Flash operation canceled"

use flashtool.

kuboweb said:
use flashtool.
Click to expand...
Click to collapse
I already use flashtool when I get this error message. I also tried to delete the "prepared" folder but it didnt work. I try right now to flash in fastboot mode but it doesnt seems to work. I think there is a problem with drivers.

17/002/2015 17:02:20 - INFO - Device disconnected
17/002/2015 17:02:24 - INFO - Device connected in flash mode
17/002/2015 17:02:35 - INFO - Selected Bundle for Sony Xperia Z3 (D6603). FW release : 23.1.A.0.690_R3C. Customization : Customized BAL_1288-5530
17/002/2015 17:02:35 - INFO - Preparing files for flashing
17/003/2015 17:03:24 - INFO - Device disconnected
17/003/2015 17:03:38 - ERROR - Drivers need to be installed for connected device.
17/003/2015 17:03:38 - ERROR - You can find them in the drivers folder of Flashtool.
I have already downloaded the usb drivers for fastboot and flashmode but it doesnt work anyway.

It looks like whether the drivers aren't installed correctly (did you reboot your pc at least once?) or you may get the whole connect - disconnect - connect in flashmode procedure wrong.