[Completed] Phone stuck on boot screen. - XDA Assist

I tried to change pixel density and after rebooting the phone got stuck in the bootscreen . I tried to restore factory settings . I wiped all user data and partition cache. Still it was stuck. The usb debugging was not enabled. I tried to flash recovery but the phone doesn't get detected(I had All the drivers). I downloaded stock rom and tried to install it using "update using sd card", it says "installation aborted". Can u guys tell the method to bring the phone back to it's original state.

Hi there,
Please give us more details about your device/firmware.
Thanks

My phone is micromax canvas unite 2. O.s is Kitkat 4.4.2, I used king root to root my phone... I did it do anything with the recovery. I.e. It still has stock recovery
---------- Post added at 12:02 PM ---------- Previous post was at 11:57 AM ----------
Can I text u on whatsapp? I'm really in a hurry.

Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

Ok... Thank you for your time

Related

[Completed] Completly messed up LG G2 , very complicated case :X

Hello to everyone here is what happened.
I rooted my LG G2 and i started messing with the uninstal application, after an hour it happened that i uninstaled stuff that i need and when i tried to back it up i couldnt, i noticed that my gallery isnt working, i decided to make factory reset, after the reset i couldnt work with settings-->general-->everything there i try to open says "unfortunetly settings has stopped working"". Then after abit of research i decided that the only way to fix the phone is to flash stock firm, so far so good but i cant enter download mode, actually i cant enter recovery mode with buttons too. Phone is working though, you cant work with settings like turn on USB debugging but phone works otherwise. Then i decided to instal TWRP manager, via TWRP manager i was able to enter android recovery mode, in which u dont have ADVANCE---> TERMINAL COMMAND, so i decided to flash TWRP recovery, after flashing now i cant even open the android recovery mode, phone still boots and works!!! Sorry if i explained it bad, please help i am actually very desperate at this point :crying:
Hi,
Asking in your device section will get you the best results....
> LG G2 > G2 Q&A, Help & Troubleshooting
Good luck!
---------- Post added at 07:21 PM ---------- Previous post was at 07:19 PM ----------
Here is a guide for returning to stock, which would surely fix your device....
http://forum.xda-developers.com/showthread.php?t=2432476
Thread closed. Thank you.

[Completed] Can't get into recovery

I installed CM 11 on my Xiaomi redmi 1s,everything was working fine except for 2 or 3 little things but a major problem occurred when I thought of flashing another ROM and now I CANT ACCESS RECOVERY MODE no matter what I try. I tried the button combination(power switch+volume up), tried adb and even tried apps like ROM Manager and, TWRP Manager and quick boot but haven't found any luck. Whenever I try to boot into recovery the phone gets stuck on the MI boot logo. I need to flash another rom and can't seem to find any other way to wipe y phone data, cache and dalvik cache and so I need help to counter this issue.
Please help me.
Angelwolfo said:
Posting from what little experience I have, but when this happened to me I needed to boot into 'Download Mode' and then flash using Odin.
On my device, this is achieved by holding Vol Up and Vol Down and Power. Yours may differ?
Click to expand...
Click to collapse
If I'm right(which I don't think I'm) then isn't Odin for Samsung phones only?
---------- Post added at 10:07 AM ---------- Previous post was at 10:03 AM ----------
[/COLOR]Hi,
I see you've found your device section and already asked your question there.
That's great! ?
So please note the sticky from the top of the Assist section,
> General discussion > XDA Assist > The Purpose of XDA Assist [Please Read]
Everyone who posted in this thread should read it.
Xda Assist is here to help members navigate the site, not for support. And only Recognized Contributers with the training and blue Assist badge reply here.
Thank you, thread closed.

[Completed] [Q] Alcatel POP UP c7 - Stuck SPLASH SCREEN

Hi, I recently did the root to my phone and everything OK, I changed the splash screen and it was fine although the splash screen not have changed. Yesterday tried to install MIUI rom with "flashify" as could not with zipped folders, deziped and the flashify read the boot.img the mobile phone restarted and gave the splash screen I installed a few days ago, was it for hours (as I have never installed a rom before thought were installing) I had enough after about 8 hours and restarted the mobile phone. Now the mobile phone connects and gets stuck on the splash screen. Already entered the recovery mode and restored the settings are used to manufacture, but keeps getting stuck at splash screen and I find no sulotion to this, if I try to install updates to the recovery-SDcard install the zip and the oporation is aborted... Someone can help me with this I would appreciate it
Sorry for my english
Hi,
I can't find anything relevant on XDA for your device and issue, so you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck !
Now i'm realy **** of... i used SPFT (Smart Phone Flash Tool) and an error have ocurred (I dont remember what error) and now the phone don't turn on, I put them to charge and the LED turn on, but no image or ligth are transfer to the monitor :s what i do now ? I left the batery of the phone for 3hours and nothing. any solution ?
You'll need to ask in the section I linked. Personally, i have no idea, and can't find anything useful for you. You likely need to install the stock firmware again. Since I can't find it on XDA.... A google search, or contacting the manufacturer about firmware and flashing instructions is your best options.
---------- Post added at 03:54 PM ---------- Previous post was at 03:52 PM ----------
Also, I hope you aren't flashing things not made for your exact device... That could result in a bricked device. (destroyed)
Hopefully someone can help in the section I linked. ?

[Completed] [Q] Phone not booting up and stuck at black screen

My phone is lava iris 455(MTK6577 chipset). So, I put a custom ROM yesterday, but it was laggy so I decided to go back to stock. I had CWM recovery installed. I used SP flash tools to flash the original ROM,but after a purple bar came, the PC just froze. Everytime, the same thing happened.
And my CWM recovery is gone as well;only a black screen comes up for a few seconds and then it switches off. I can't boot to recovery too.
I tried installing CWM recovery through SP flash tools, but it gave me an error saying that the handset doesn't support DRAM(didn't happen the first time I installed recovery which was yesterday).
So, what do you guys think the problem is? Is it hard bricked? My PC does recognise the phone though. Any help is appreciated.
Hi
Be sure you are using the firmware for your exact model number... Same for roms... Otherwise you could very well brick your device.
Here is a thread on flashing stock firmware again, you can ask for help here too.
> Android Development and Hacking > Miscellaneous Android Development > [FIRMWARE]LAVA Iris 455 Official Jellybean 4.1.1 Firmware
If that doesn't help and you still can't find help, you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
---------- Post added at 10:10 AM ---------- Previous post was at 10:09 AM ----------
The first link has the link to firmware removed, but it's shown in a quote down the page. ?
I actually used the ROM from that link only, but the same result once again. Is the preloader by any chance of another ROM?
I wouldn't know. Best to ask in that thread for help, or the section I linked second. ?

[Completed] Help 111 i brick my prestigio 5300.cant install drivers

Bricked PAP5300DUO
tHE PHONE IS VIBRATING. i CAN ENTER IN RECOVERY MODE.. The PC make a sound but the fastboot,Odin & other programs cant see my phone. i INSTALLED ALL KIND OF DRIVERS BUT .... i USED PIMP MY ROM BUT I MADE A MISTAKE TO USE OTHER SIMILAR APP AFTER THAT AND AFTER REBOOT DIED. I WIPE THE CHECHE & TRIED FACTORY RESET BUT AT THE END FAILS AND SAYS ...DATA/APP IS MISSING. i TRIED RESTORE TITANIUM BACKUP FILE BUT DOESNT HELPED. PLEASE HELP !!!
I USED THE SUGGESTED METHOD BUT IT SAYS <WAITING FOR DEVICE>
THE LAST I MADE BACKUP/RECOVERY WITH MY OLD BACKUP BUT STILL NOTHING. I KNOW NOW I MUST DO SOMETHING FROM PC BUT DRIVERS ARE PROBLEM.
PLEASE try to help me. Im new to all this ****.
Hi there,
I'm sorry but I can't find anything related to your question.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

Categories

Resources