I installed CM 11 on my Xiaomi redmi 1s,everything was working fine except for 2 or 3 little things but a major problem occurred when I thought of flashing another ROM and now I CANT ACCESS RECOVERY MODE no matter what I try. I tried the button combination(power switch+volume up), tried adb and even tried apps like ROM Manager and, TWRP Manager and quick boot but haven't found any luck. Whenever I try to boot into recovery the phone gets stuck on the MI boot logo. I need to flash another rom and can't seem to find any other way to wipe y phone data, cache and dalvik cache and so I need help to counter this issue.
Please help me.
Angelwolfo said:
Posting from what little experience I have, but when this happened to me I needed to boot into 'Download Mode' and then flash using Odin.
On my device, this is achieved by holding Vol Up and Vol Down and Power. Yours may differ?
Click to expand...
Click to collapse
If I'm right(which I don't think I'm) then isn't Odin for Samsung phones only?
---------- Post added at 10:07 AM ---------- Previous post was at 10:03 AM ----------
[/COLOR]Hi,
I see you've found your device section and already asked your question there.
That's great! ?
So please note the sticky from the top of the Assist section,
> General discussion > XDA Assist > The Purpose of XDA Assist [Please Read]
Everyone who posted in this thread should read it.
Xda Assist is here to help members navigate the site, not for support. And only Recognized Contributers with the training and blue Assist badge reply here.
Thank you, thread closed.
Related
Hey,
I was trying to format/wipe file system from CWM and the device crashed, so i opened ODIN and i inserted a firmware and i got FAIL on <ID:0/007> factoryfs.img
Please can anyone help with this ? I tried going in the recovery mode but i got an error saying open Kies and do recovery but Kies doesn't want to connect.
Thread moved to Q & A section, post in the relevant section next time.
'cooleagle' said:
Thread moved to Q & A section, post in the relevant section next time.
Click to expand...
Click to collapse
No problem...!
This kind of things happen..I am not that expert but can advise on the basis of what i gained from xda website.
If you can go in recovery and download means not much serious thing.
FIRST TRY TO RESTORE YOUR SYSTEM FROM RECOVERY BY USING YOUR OLD BACKED UP .
if not then follow steps below:
1. I would recommend you to download fresh odin3V1.85
2. Download steady honeycomb version of your region from
3. From recovery clear delvic cache/factory reset/ and all stuff.
4. Enter download mode and do all the flashing once again. Make sure your power to usb post is ok. I have observed old laptops or pcs just disconnect for a second or so and again reconnect. If this happens while flashing then you come to this stage.
Hope it will solve your problem.
If not other experts are still out there on XDA developers website.......
Don;t panic.
Enjoy with XDA developer's website.
Ashwin
---------- Post added at 11:21 AM ---------- Previous post was at 11:20 AM ----------
george.baskharon said:
Hey,
I was trying to format/wipe file system from CWM and the device crashed, so i opened ODIN and i inserted a firmware and i got FAIL on <ID:0/007> factoryfs.img
Please can anyone help with this ? I tried going in the recovery mode but i got an error saying open Kies and do recovery but Kies doesn't want to connect.
Click to expand...
Click to collapse
No problem...!
This kind of things happen..I am not that expert but can advise on the basis of what i gained from xda website.
If you can go in recovery and download means not much serious thing.
FIRST TRY TO RESTORE YOUR SYSTEM FROM RECOVERY BY USING YOUR OLD BACKED UP .
if not then follow steps below:
1. I would recommend you to download fresh odin3V1.85
2. Download steady honeycomb version of your region from [URL="http://www.sammobile.com/"]
3. From recovery clear delvic cache/factory reset/ and all stuff.
4. Enter download mode and do all the flashing once again. Make sure your power to usb post is ok. I have observed old laptops or pcs just disconnect for a second or so and again reconnect. If this happens while flashing then you come to this stage.
Hope it will solve your problem.
If not other experts are still out there on XDA developers website.......
Don;t panic.
Enjoy with XDA developer's website.
Ashwin
I tried to change pixel density and after rebooting the phone got stuck in the bootscreen . I tried to restore factory settings . I wiped all user data and partition cache. Still it was stuck. The usb debugging was not enabled. I tried to flash recovery but the phone doesn't get detected(I had All the drivers). I downloaded stock rom and tried to install it using "update using sd card", it says "installation aborted". Can u guys tell the method to bring the phone back to it's original state.
Hi there,
Please give us more details about your device/firmware.
Thanks
My phone is micromax canvas unite 2. O.s is Kitkat 4.4.2, I used king root to root my phone... I did it do anything with the recovery. I.e. It still has stock recovery
---------- Post added at 12:02 PM ---------- Previous post was at 11:57 AM ----------
Can I text u on whatsapp? I'm really in a hurry.
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Ok... Thank you for your time
So, I wanted to install a custom rom.
I picked TranchidaKat because, well, it was the first one I found?
Firstly to install a custom recovery. It should be noted that I bought this tablet from a classmate, and it was already rooted.
I followed instructions found here to install CWM recovery. TWRP doesn't appear to support Tab3 per their website.
I downloaded the files, and they appeared to write fine in Odin. However, when I attempt to boot into recovery (hold volume up and home, then hold power) the device boots to the Samsung Galaxy Tab logo screen, then simply sits there until I decide to turn it off.
Any suggestions? This whole process is rather overwhelming to me.
Hi,
Please ask for help in the CWM link you already posted. They will be the best ones to help you! ?
Good luck!
---------- Post added at 07:40 PM ---------- Previous post was at 07:39 PM ----------
Actually, I see you've already asked about this in multiple threads in your device section.
Xda Assist is here to help navigate the site, not for support.
Thank you for understanding, thread closed.
I have a Samsung Note 3 the screen is black with apps telling me they stop working and i can press ok or send a report but it just goes on and on.Also i should mention that my down volume button is not working so i can't go into factory reset from the recovery boot and can't connect it to my pc .Some help please?
Hi, thank you for using XDA Assist. Can you get into download mode? I'd recommend you flasj the stock firmware in Odin. See this, http://forum.xda-developers.com/showthread.php?t=2740676 Also, there is a forum for your device here, http://forum.xda-developers.com/galaxy-note-3 They are the experts on your device and the best place to get help.
Thread closed.
Hi Guys,
Can someone help me please, I tried to flash my GT-I9100 via Odin, yet I may be flashed a wrong rom. Now, my phone is just hang & stays at the start up Logo of "Samsung GT-I9100" with a yellow triangle below. Whenever I tried to attempt to flash again with other possible Roms, it goes "Pass" in Odin yet nothing happens positively in my phone & stays "hang".
I could also go still to recovery mode. I already did wiped cache & data, yet no effect.
I appreciate your response.
-Jenero Gang
Hi,
Thanks for writing to us at XDA Assist.
Try posting your question in this friendly Q&A thread:
New members friendly Q&A thread
Good luck!