My phone is lava iris 455(MTK6577 chipset). So, I put a custom ROM yesterday, but it was laggy so I decided to go back to stock. I had CWM recovery installed. I used SP flash tools to flash the original ROM,but after a purple bar came, the PC just froze. Everytime, the same thing happened.
And my CWM recovery is gone as well;only a black screen comes up for a few seconds and then it switches off. I can't boot to recovery too.
I tried installing CWM recovery through SP flash tools, but it gave me an error saying that the handset doesn't support DRAM(didn't happen the first time I installed recovery which was yesterday).
So, what do you guys think the problem is? Is it hard bricked? My PC does recognise the phone though. Any help is appreciated.
Hi
Be sure you are using the firmware for your exact model number... Same for roms... Otherwise you could very well brick your device.
Here is a thread on flashing stock firmware again, you can ask for help here too.
> Android Development and Hacking > Miscellaneous Android Development > [FIRMWARE]LAVA Iris 455 Official Jellybean 4.1.1 Firmware
If that doesn't help and you still can't find help, you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
---------- Post added at 10:10 AM ---------- Previous post was at 10:09 AM ----------
The first link has the link to firmware removed, but it's shown in a quote down the page. ?
I actually used the ROM from that link only, but the same result once again. Is the preloader by any chance of another ROM?
I wouldn't know. Best to ask in that thread for help, or the section I linked second. ?
Related
Hello.
So today i decided that im tired of not having 4.4 kitkat update for my Allview V1 Viper phone and that its time for me to do some rooting and stuff
I rooted my phone with Framaroot and installed CMW via Mobileuncle Tools.
Then i tried to apply the octarom_kk_iq4410_v3_fixed update.
Booted into recovery, selected the rar to update from, it started:
Finding update package.
Opening update package.
Installing update...
octarom mtk iq4410 kitkat 4.4.2 v3.0
And it stopped there... no other text come up or anything happening. I waited for half an hour and still nothing. So i removed the battery to restart the phone. And now it doesnt boot. Only starts, displays the Allview logo and it stays like that with the logo forever.
HELP!
Sir,
You have bellow a thread where you can ask for help:
[Q&A]Gionee elife e3 development - root, cwm , roms , nadroid backup explained in detail
If you don't find any answer in thjat thread, please ask in the forum bellow:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Thread closed, thank you.
I tried to change pixel density and after rebooting the phone got stuck in the bootscreen . I tried to restore factory settings . I wiped all user data and partition cache. Still it was stuck. The usb debugging was not enabled. I tried to flash recovery but the phone doesn't get detected(I had All the drivers). I downloaded stock rom and tried to install it using "update using sd card", it says "installation aborted". Can u guys tell the method to bring the phone back to it's original state.
Hi there,
Please give us more details about your device/firmware.
Thanks
My phone is micromax canvas unite 2. O.s is Kitkat 4.4.2, I used king root to root my phone... I did it do anything with the recovery. I.e. It still has stock recovery
---------- Post added at 12:02 PM ---------- Previous post was at 11:57 AM ----------
Can I text u on whatsapp? I'm really in a hurry.
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts but first register an account on XDA forums.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Ok... Thank you for your time
Hi, I recently did the root to my phone and everything OK, I changed the splash screen and it was fine although the splash screen not have changed. Yesterday tried to install MIUI rom with "flashify" as could not with zipped folders, deziped and the flashify read the boot.img the mobile phone restarted and gave the splash screen I installed a few days ago, was it for hours (as I have never installed a rom before thought were installing) I had enough after about 8 hours and restarted the mobile phone. Now the mobile phone connects and gets stuck on the splash screen. Already entered the recovery mode and restored the settings are used to manufacture, but keeps getting stuck at splash screen and I find no sulotion to this, if I try to install updates to the recovery-SDcard install the zip and the oporation is aborted... Someone can help me with this I would appreciate it
Sorry for my english
Hi,
I can't find anything relevant on XDA for your device and issue, so you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck !
Now i'm realy **** of... i used SPFT (Smart Phone Flash Tool) and an error have ocurred (I dont remember what error) and now the phone don't turn on, I put them to charge and the LED turn on, but no image or ligth are transfer to the monitor :s what i do now ? I left the batery of the phone for 3hours and nothing. any solution ?
You'll need to ask in the section I linked. Personally, i have no idea, and can't find anything useful for you. You likely need to install the stock firmware again. Since I can't find it on XDA.... A google search, or contacting the manufacturer about firmware and flashing instructions is your best options.
---------- Post added at 03:54 PM ---------- Previous post was at 03:52 PM ----------
Also, I hope you aren't flashing things not made for your exact device... That could result in a bricked device. (destroyed)
Hopefully someone can help in the section I linked. ?
HI guys good day~!
well, i am newbie in this forum and about android devices. I am curious about android things, due to my curiosity, i have successfully rooted my Lenovo a316i running Jelly Bean OS and then installed some rooted apps without any back up. Then lastly, I installed that ChainFire 3D without any phone back up since i don't have some knowledge yet about backing up my phone. So the ChainFire app was successfully installed then my phone restarted without back up apps installed. Now, my phone is stacked in the boot...
Is there any way i can recover my phone?..
PS.
my phone has 3 recovery modes(Default Recovery) ;
FastBoot Mode (i dont know how to use it), Recovery Mode, Normal Boot.. maybe this could help.
I also tried the Recovery Mode then use the method "Apply update from ADB" and tried sideloading the default ROM of my phone but after 100% sideloading, my phone would say " Installation Aborted "... i guess i'm doing the wrong way in flashing my STOCK ROM using that method.. Also my USB Debugging MODE is off...
i really need your help..... Thanks in ADVANCE!..
Hi there,
I'm sorry but I can't find anything related to your question/device:
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
I recently installed custom rom on my phone then i downloaded twrp recovery manager or maybe it was rom installer in my android . Through one of those apps i installed custom boot screen then I decided to change it after few reboots because it was taking longer then the default boot screen so i deleted thought it would go back to default boot screen automatically so to check i restarted my device and phone got stuck at start up screen. I was trying to get my recovery back which wasnt working so i could install custom rom now the phone is stuck at start up and recovery doesnt work already what should i do to fix this epic problem i really dont want to lose my phone over custom roms lol ? Help would be much appreciated .
Thank you.
Sir,
I already give you an answer here: http://forum.xda-developers.com/gen...roid-phone-t3017734/post58544676#post58544676
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck