Hi there,
I tried to download the file bootz3monxtest01.img from a different website, but I can only download a .exe file, because the
original download has been deleted. Does anybody have this file on his computer and can upload it please?
The file is used to root the Sony Xperia Z3. The root is almost done all I am missing is this file.
Thanks
http://d-h.st/5EA ??
Yes, but
That is the page I was talking about. Both links are .exe files. So they don't work, because I need an .img file.
https://mega.co.nz/#!QVxyFRJQ!ZqUjTgrxhYTaIg2Bf0VsUwpmcNt441bQYZ9eb2WASXg ??
Thanks a lot! I was looking for an alternative download link for about 30 minutes and didn't find any. Thank you.
Trying to root locked bootloader ??
My bootloader is unlocked. There is a way to unlock it.
frezzyx said:
That is the page I was talking about. Both links are .exe files. So they don't work, because I need an .img file.
Click to expand...
Click to collapse
I would try again if I was you. I just downloaded the file and its an image file not a .exe
frezzyx said:
Hi there,
I tried to download the file bootz3monxtest01.img from a different website, but I can only download a .exe file, because the
original download has been deleted. Does anybody have this file on his computer and can upload it please?
The file is used to root the Sony Xperia Z3. The root is almost done all I am missing is this file.
Thanks
Click to expand...
Click to collapse
The trick is to supress your internett anti-BS skills and click the "Download now" button and not the usual "Download" button... :laugh:
odinh said:
The trick is to supress your internett anti-BS skills and click the "Download now" button and not the usual "Download" button... :laugh:
Click to expand...
Click to collapse
Yep. That's how I downloaded it.
Hey guys, all the links are down again ... where can I find it?
As the guy above me said, the both links of bootZ3monxtest01.img are down and I couldn't find any alternatives.. Could anyone give a link from another website, please?
Hello everyone do you still have a copy if the image file? The link is no longer working please send to me your copy. Thank you so much!
Up are there any alternative links?. It seems all current links are down.
Xperia Z3 D6653 - Stuck on boot screen -
Hi guys,
I unlocked the boot loader and installed the TWRP on to the device and entered into that by pressing the Volume + - couple of times and wiped internal memory Cache & Dalvin then rebooted the device and now its stuck on the Boot screen
(Black screen showing SONY XPERIA)
:crying: :crying: :crying:
aavnashkumar said:
Hi guys,
I unlocked the boot loader and installed the TWRP on to the device and entered into that by pressing the Volume + - couple of times and wiped internal memory Cache & Dalvin then rebooted the device and now its stuck on the Boot screen
(Black screen showing SONY XPERIA)
:crying: :crying: :crying:
Click to expand...
Click to collapse
It is my problem Too, I was in Lineage 15, I restored my TA Backup and flash a stock rom, Worked fine, Booted and installing App, when I opened the Pokemon My Phone restarted and now is in Bootloop, I flashed a Stock again but don't work, I am Looking for these file too to try Flash only the Kernel, Flashing roms don't work, don't change my Stock Rom, only report my last successfull Rom Instalation and Corrupted now.
frezzyx said:
Thanks a lot! I was looking for an alternative download link for about 30 minutes and didn't find any. Thank you.
Click to expand...
Click to collapse
Can someone upload the file? maybe one for build number 23.5.A.0.575 also
Related
I have worked with some XOLO Q1100 folks and we have finally created Stock XOLO Q1100 backup. I was just viewing my FB account and then I got a message from Vallabh who gave me list of all partitions. After that I made a script to backup stock firmware for XOLO q1100 and he passed it to Gaurav because his ROM was much tweaked. Finally Gaurav uploaded the ROM and I am now posting it on XDA.
This is the first XOLO q1100 firmware release and I am proud to do so with my friends!
Credits:
ME: for making script and other things.
Vallabh: for trying this script and for endless testing.
Gaurav: for uploading the firmware!
Rohan: My brother who is awesome :silly:
Downloads:
Click here to download stock firmware of XOLO Q1100.
Great Work! My lonely brother
Nice work Forever Alone a.k.a Rohan Arya :3 :3
Nice work... would like to give credits to others also.
But then how to use thie stock firmware because our Customer Recovery doesn't work.
Also if Gaurav is on XDA, can you pls ask him to mention what all tweaks are on his stock ROM?
Vipuldj said:
Nice work Forever Alone a.k.a Rohan Arya :3 :3
Click to expand...
Click to collapse
thanks!
A N D Y said:
Great Work! My lonely brother
Click to expand...
Click to collapse
Yeah bro!!
mGforCe said:
Nice work... would like to give credits to others also.
But then how to use thie stock firmware because our Customer Recovery doesn't work.
Also if Gaurav is on XDA, can you pls ask him to mention what all tweaks are on his stock ROM?
Click to expand...
Click to collapse
Flash it by using this script: http://www.mediafire.com/download/32nt1n2yea9lq3i/Restore-Forever-Alone-XDA.rar
Forever Alone said:
Flash it by using this script: http://www.mediafire.com/download/32nt1n2yea9lq3i/Restore-Forever-Alone-XDA.rar
Click to expand...
Click to collapse
Thanks... so the steps are:
1) Connect phone in fastboot
2) Extract the zip file to a folder & copy the extracted files from this attachment over there
3) Run the .bat file
Can you confirm if this has been tested by someone?
Also any idea on what all are the improvement done by Gaurav?
mGforCe said:
Thanks... so the steps are:
1) Connect phone in fastboot
2) Extract the zip file to a folder & copy the extracted files from this attachment over there
3) Run the .bat file
Can you confirm if this has been tested by someone?
Also any idea on what all are the improvement done by Gaurav?
Click to expand...
Click to collapse
100% tested and working. A person bricked his device n after using my firmware, it got fixed!
Forever Alone said:
100% tested and working. A person bricked his device n after using my firmware, it got fixed!
Click to expand...
Click to collapse
:good:
Any idea what has been updated by Gaurav? Is he on XDA, if you can just tag him in this post.
Also pls confirm the steps. Thanks
mGforCe said:
:good:
Any idea what has been updated by Gaurav? Is he on XDA, if you can just tag him in this post.
Also pls confirm the steps. Thanks
Click to expand...
Click to collapse
see bro...add that .bat file n other extracted files in the folder which has all the images. Boot your device t bootloader and connect through USB. Execute my script to flash your device...then reboot..IDK What he has done. He has not modified much rom.
Forever Alone said:
see bro...add that .bat file n other extracted files in the folder which has all the images. Boot your device t bootloader and connect through USB. Execute my script to flash your device...then reboot..IDK What he has done. He has not modified much rom.
Click to expand...
Click to collapse
Ok...clear
Sent from my Q1100
Any Developments?
With the kernal source code available is there anyway Kitkat my be included in Q 1100?
The files helped me out today... Thanks.
Confirmed its working.
Just a pointer for someone looking for further guidance on how to use the files shared by OP.
1) Root into fastboot mode by pressing both Volume Up & Down keys along with Power key. You will boot into black screen
2) Open the script bat file
3) Now connect the phone via USB to PC and files will start copying
4) Once all files copied, take out battery, restart into recovery and wipe cache & data
5) Restart phone into normal mode
Thanks a lot bro, Saved me from Bricked device!
After flashing i pulled the battery and then rebooted the device it was on xolo logo for too long so i again removed battery and tried to reboot but now it doesnt boot or get in recovery or can be detected in fastboot
what to do?
mGforCe said:
The files helped me out today... Thanks.
Confirmed its working.
Just a pointer for someone looking for further guidance on how to use the files shared by OP.
1) Root into fastboot mode by pressing both Volume Up & Down keys along with Power key. You will boot into black screen
2) Open the script bat file
3) Now connect the phone via USB to PC and files will start copying
4) Once all files copied, take out battery, restart into recovery and wipe cache & data
5) Restart phone into normal mode
Click to expand...
Click to collapse
After copying and loading recovery, i see a chinese recovery ....
HOW to wipe CACHE and data
Wifi Problem
I have flashed this room on my and my brother's mobile. Both the mobiles are working fine but unable to connect to my WiFi-router at the same time. i am surprised to see that both the device have same MAC address.
So can anyone help me in this? i have flashed the stock firmware also but it doesn't helped me either.
xolo q1100 flashing problems
hi I am a user of xolo q1100. my phone is stuck on logo.i done factory reset but problem not solved.i tried qfil but the firmware doesnt contain firehouse mbn file.i tried emmc software download tool.but i gives error 0x0004005 while switching to download mode. i chaned cmw to e3 but it gives error signature verification.i wnat to back cmw how can i changed to another twrp.plz i want to my phone back to a condition.plz help me guys.
Hi
i can't root my device if you can help me please
my phone is honor 6 plus PE-TL10
i did unlock and i use multi-tool when i flash cwm recovery it is ok but i cant boot from it, when i hold vel+ and power comes huawie logo only then black screen, then i tried other verions of CWM and nothing was ok, then i back to stock recovery, so i want boot recovery to root my phone
Some guys said it works with them , so can you help me please with files or something ?
Thank you,
and2011 said:
Hi
i can't root my device if you can help me please
my phone is honor 6 plus PE-TL10
i did unlock and i use multi-tool when i flash cwm recovery it is ok but i cant boot from it, when i hold vel+ and power comes huawie logo only then black screen, then i tried other verions of CWM and nothing was ok, then i back to stock recovery, so i want boot recovery to root my phone
Some guys said it works with them , so can you help me please with files or something ?
Thank you,
Click to expand...
Click to collapse
I've ordered 6 plus but it is not with me yet. However, have you tried using tool provided on the Chinese site instead of multi tool? Links are in this forum. If you cant find, I can look up for you. Thanks.
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
thank you
Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
Thanks very much now i rooted , it is very help
now i search for changing country code and remove chinese lang
Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
Sathelp, do you know where I can find a full stock ROM for PE-TL-10?
dchsub said:
Sathelp, do you know where I can find a full stock ROM for PE-TL-10?
Click to expand...
Click to collapse
there are all the ROM versions at Needrom.com but ours is at http://www.needrom.com/download/honor-6-4g-pe-tl10/
or from http://www.huaweimobileshop.com/download (right at the bottom)
Sathelp said:
there are all the ROM versions at Needrom.com but ours is at http://www.needrom.com/download/honor-6-4g-pe-tl10/
or from http://www.huaweimobileshop.com/download (right at the bottom)
Click to expand...
Click to collapse
Sathelp thank you very much. It is very helpful.
Can I use this method for Indian version
Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
Just flash this 2 file or still need unlock phone first? Thank you
device not found
tonylhw82 said:
Just flash this 2 file or still need unlock phone first? Thank you
Click to expand...
Click to collapse
I tried on my win 7 and win 8, when in fastboot, I see in red letters, PHONE unlocked, i think bootloader is unlocked but I didn't do that , it was like that when I booted the first time to fastboot
when I use the flashtool , i see : device not found .
Adb driver is installed , hisuite also, drivers are working ..
Can someone assist please ?
device : pe tl10 huawei honor 6 plus
bought in Belgium
---------- Post added at 01:44 PM ---------- Previous post was at 01:41 PM ----------
Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
I'm stuck on starting ADB, waiting for device..
Can someone assist?
Guys how to unlock bootloder ? step by step guide for PE-TL10 PLZZZ
Sathelp said:
I have had a little play and edit of tools around to get mine flashed both ways. The files attached work for my PE TL-10. If you ensure that you put the SuperSU.zip file in the same directory as the commands and notes, it will work fine. I have flashed both ways from stock to CWM and back several times and installed the SuperSU.zip file.
Just follow the notes and you should be good to go.
Click to expand...
Click to collapse
hye. just follow your tutorial but ending in bootloop. im able to flash those recovry but failed to boot to it. phone just bootloop . i think this tutorial cannot be done on lollipop 5.1.1 version.
I have not tried this on 5.1.1 as IU have had no need to root it. Mine is still with an unlocked boot loader from 4.1.1 but running 5.1.1
I hope you have managed to recover your system.
and2011 said:
Thanks very much now i rooted , it is very help
now i search for changing country code and remove chinese lang
Click to expand...
Click to collapse
hi
How to change the region/country code? I have petl10 provided China. I want changing code with Europa . They did this for the Mate7 here. But *#*#2846579159#*#* dont work on honor6+.
(sorry for bad english)
please my huawia tab t1701u can't be rooted.please help me..........
For product: a51_dtul
Download the firmware from here
Note 1: If you get "Waiting for device", install drivers properly.
Note 2:The zip will not extract, you have to use it directly without extracting. So don't bother trying to extract the zip, it will always give you error.
Note 3: If using windows 8/8.1/10, make sure to disable driver signature check before installing drivers.
Install fastboot drivers from below if not installed previously..
FastbootDrivers1 or FastbootDrivers2
Download fastboot tools from the attachement, extract it somewhere..
Method 1: pushing the RUU through PC
Now place the above downloaded zip inside the same folder having "fastboot.exe" and rename it to "firmware.zip"
Open command prompt onto the current folder (Shift+Right Click on the folder then select "Open Command Window here")
Boot into fastboot mode (Vol down+ Power then select fastboot)
Now type the commands as given below..
1. fastboot reboot-bootloader
2. fastboot oem lock (If Bootloader is Unlocked previously otherwise skip)
3. fastboot oem rebootRUU
wait for silver htc logo
3. fastboot flash zip firmware.zip
Now some progress bar should appear onto you phone. Wait for it to finish, after that
4. fastboot reboot
Method 2: from the phone itself thanks to @Kellwa
1- Lock the bootloader using fastboot oem lock command
2- Rename the downloaded zip to 0PFJIMG.zip
3- Put the file on sd card and insert it into mobile
4- Reboot into bootloader and it will ask you if you want to update
5- Press VOL UP to say yes
you are amazing dude.... where did you found the indian firmware from. Had been searching for it since ages.... Thanks a tonn...
harshad_kp said:
you are amazing dude.... where did you found the indian firmware from. Had been searching for it since ages.... Thanks a tonn...
Click to expand...
Click to collapse
Urgent Help Needed..
I lost my boot partition after upgrading to Lolipop due to some mistake while using fastboot..
Please extract the boot.img from lolipop update zip file and upload.. This will be a great help for me..
My phone is dead as of now..
TheInvader said:
Urgent Help Needed..
I lost my boot partition after upgrading to Lolipop due to some mistake while using fastboot..
Please extract the boot.img from lolipop update zip file and upload.. This will be a great help for me..
My phone is dead as of now..
Click to expand...
Click to collapse
Downloading the update now... Will add boot.img as soon as its done
harshad_kp said:
Downloading the update now... Will add boot.img as soon as its done
Click to expand...
Click to collapse
Bro you are my only hope for now
Please make sure t backup the zip.. at any cost....
harshad_kp said:
Downloading the update now... Will add boot.img as soon as its done
Click to expand...
Click to collapse
I need it too bro
Just make sure you get a copy of OTA zip from phone and Upload the boot.img
Thanks in advance..
I am downloading OTA since past 6 hours, every time it gets corrupted and starts from 0, I am fed up. I want to update right now and I found this thread, so this is the official HTC Stock 5.0 ROM for HTC Desire 820 Dual SIM ? Has anyone tried flashing it "SUCCESSFULLY" via fastboot?
imran27 said:
I am downloading OTA since past 6 hours, every time it gets corrupted and starts from 0, I am fed up. I want to update right now and I found this thread, so this is the official HTC Stock 5.0 ROM for HTC Desire 820 Dual SIM ? Has anyone tried flashing it "SUCCESSFULLY" via fastboot?
Click to expand...
Click to collapse
No, that is RUU for kitkat 4.4.
To update to lollipop, either download it in phone or wait for anyone to upload it then download it on PC and then flash it.
And your download gets corrupted, better watch your Internet connection. Get a stable connection (WiFi preferred) then download the update
I have tried to download it three times from different machines. Successful downloaded every time. However, the downloaded zip file seems to be corrupted (cannot open by any of the zip viewers). I think the original file is corrupted. Correct me if I am wrong.
I have successfully upgraded in one attempt. But lost my boot.img.. We need help of some person who can upload the complete ZIP. This will help me and all those who are receiving corrupted update file.
tongben said:
I have tried to download it three times from different machines. Successful downloaded every time. However, the downloaded zip file seems to be corrupted (cannot open by any of the zip viewers). I think the original file is corrupted. Correct me if I am wrong.
Click to expand...
Click to collapse
From stating machine, if you mean PC. I would like to know how are you downloading ota on PC.AFAIK, OTAs are downloaded on phone itself only
sshivampp, I referred to the firmware download link at the first post. I am not doing the OTA downloading.
tongben said:
sshivampp, I referred to the firmware download link at the first post. I am not doing the OTA downloading.
Click to expand...
Click to collapse
The Zip you downloaded is not supposed to be opened, it has to be used directly. Its normal that the zip won't extract. It does not mean at all that your download is corrupt
TheInvader said:
Bro you are my only hope for now
Please make sure t backup the zip.. at any cost....
Click to expand...
Click to collapse
Link to the boot.img. Will try uploading the OTA as soon as possible...
https://mega.nz/#!KAJlWLYB!9V4gp9_-8AuSq85qR6aPmoB5hidaJcz1Gbq2jSRGOnQ
harshad_kp said:
Link to the boot.img. Will try uploading the OTA as soon as possible...
https://mega.nz/#!KAJlWLYB!9V4gp9_-8AuSq85qR6aPmoB5hidaJcz1Gbq2jSRGOnQ
Click to expand...
Click to collapse
Thanks alot. Downloading now
Can someone backup HTC desire 820 lolipop system?
harshad_kp said:
Link to the boot.img. Will try uploading the OTA as soon as possible...
https://mega.nz/#!KAJlWLYB!9V4gp9_-8AuSq85qR6aPmoB5hidaJcz1Gbq2jSRGOnQ
Click to expand...
Click to collapse
Thx bro for the file.
Who can upload a OTA file or the system backup?
kinghunki said:
Who can upload a OTA file or the system backup?
Click to expand...
Click to collapse
Ill upload the ota file tonight... N wil giv u the link...
harshad_kp said:
Ill upload the ota file tonight... N wil giv u the link...
Click to expand...
Click to collapse
OK. Thank you!
I need the stock recovery for the B522 rom or even better a working TWRP version, because I flashed the wrong one and now I'm stuck in bootloop.
I'm on MT-L09
EDIT: For some reason it took like half an hour to boot, but I still have no custom recovery.
I searched for an hour and ALL LINKS ARE DEAD... How can every single link be down?
Look here...
http://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
thanks, i've already seen this thread and heard that chudy even posted a tool for installing Recovery, but I can't find anything there.. there are twrp Backups, but I need just TWRP for this Version.
Tazmaniiac said:
thanks, i've already seen this thread and heard that chudy even posted a tool for installing Recovery, but I can't find anything there.. there are twrp Backups, but I need just TWRP for this Version.
Click to expand...
Click to collapse
Here is a tool: https://mega.nz/#!w15xjZxL!0-alMyU4R...ODLE0QarKtdVCg
Tazmaniiac said:
I need the stock recovery for the B522 rom or even better a working TWRP version, because I flashed the wrong one and now I'm stuck in bootloop.
I'm on MT-L09
EDIT: For some reason it took like half an hour to boot, but I still have no custom recovery.
I searched for an hour and ALL LINKS ARE DEAD... How can every single link be down?
Click to expand...
Click to collapse
here is the link : https://mega.nz/#!2M020ZII!a0JOjS1ZmCT1aSggvCPYb7lhkPimYtVhja-Mv0qk7DY
Thanks for the links, I think my computer doesn't like Mega, the first link needed an decryption code and didn't work on my phone at all, the second one didn't start and only worked via the mega app..
But TWRP is working and that's all I wanted.
Tazmaniiac said:
Thanks for the links, I think my computer doesn't like Mega, the first link needed an decryption code and didn't work on my phone at all, the second one didn't start and only worked via the mega app..
But TWRP is working and that's all I wanted.
Click to expand...
Click to collapse
if you need stock recover i can upload to another site
mutahharbashir said:
if you need stock recover i can upload to another site
Click to expand...
Click to collapse
TWRP is working for me now but thank you for offering!
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
mfonemaello said:
Hello, I need help to recover my S8 PRO, it does not start,:crying::crying: and I have try flashed with flash tool and with "smartphone multi port download tool" and it gives me these errors, if someone can help me. Thank you
Click to expand...
Click to collapse
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
thxs Klima i fixed
Klima1123 said:
Can you specify what errors you're receiving, maybe I can help you, I have a S8 Pro too
Click to expand...
Click to collapse
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
I've heard about it, but I didn't noticed nothing strange coming from the app, I'll scan it with avast, if he finds something, I'll deleted him, my phone does have root
---------- Post added at 01:50 PM ---------- Previous post was at 01:41 PM ----------
Hey guy, I'm trying to port lineage os 14 & 15 to the S8 Pro, do you have experience with twrp, flash etc.? You could help with being my beta tester, next I'll put some betas on android file host, and make a forum here on XDA for the phone
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
I have found it on 4pda.
Just google ulefone s8 pro 4pda.
You need to let translate by google, because of different language.
4ndyroid said:
Does anyone have a link to the twrp img file, or any other custom recovery, i cant find it anywhere, all the links just point to the flash tool but it doesn't contain the twrp img file?
Click to expand...
Click to collapse
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Klima1123 said:
Here: https://androidfilehost.com/?fid=962021903579483650
Use this to install twrp and magisk root
Click to expand...
Click to collapse
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
4ndyroid said:
Hi, thanks you for your help, was able to flash twrp using the tool you directed me to, however now im stuck at the splash screen (ulefone s8 image) and phone wont boot (am able to flash stock rom to revocer phone, so not a complete brick, just cant get it to boot after flashing twrp), any ideads?
Click to expand...
Click to collapse
Something like this has happened to me too. Boot your phone on twrp then select the option 'Wipe', then "Format data", my phone only booted up after I did this
---------- Post added at 04:41 PM ---------- Previous post was at 04:36 PM ----------
mfonemaello said:
thanks I could fix it:good: Do you know that the latest firmware has 1 Trojan on the sound recorder?
Click to expand...
Click to collapse
In the sound recorder I didnt find nothing, but the app GYBeautySnap aka BeautyMakeup open some annoyng processes (that consumes about 40mb of ram) that has something like ads, I think he is the real virus
Tried wiping then 'format system', still didn't work, stays stuck at the boot logo, bit thanks for the help anyway.
It rebootq only to a green TWRP!
Touf344 said:
Doesn't work with the firmware V3.01 and V3.03. Getting in the recovery works fine, but booting the system is impossible. The boot stay stuck at the "S8 Pro With android (something)" splash screen.
Click to expand...
Click to collapse
My phone use V3.01 firmware and it's worked
Klima1123 said:
My phone use V3.01 firmware and it's worked
Click to expand...
Click to collapse
What was the process you used?
4ndyroid said:
What was the process you used?
Click to expand...
Click to collapse
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment noverity.zip
Klima1123 said:
I've retried the whole process: flashed the stock rom, booted the phone on fastboot, used this (https://androidfilehost.com/?fid=962021903579483650) to install twrp, and then i tried booting the phone..... :silly: it's don't started , so i used that noverity.zip that comes with the tool, after this my phone booted, the tutorial that i used demands the installantion of this zip View attachment 4460246
Click to expand...
Click to collapse
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
4ndyroid said:
Hi, thanks for your help, seems I missed the noverity.zip part. What is the noverity.zip and how did you install it? (flashed via TWRP, ADB or using the tool?) Could you link the tutorial you used?
Click to expand...
Click to collapse
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Klima1123 said:
That noverity.zip disables a mechanism in the boot partition that verify the boot itself and the system partition, when you install twrp a little bit of the boot partition is altered and so the boot is blocked.
Install the zip using twrp. You can take a look at this (https://www.getdroidtips.com/twrp-recovery-ulefone-s8-pro/), but if I remember well, that s8 pro toolkit app is the one that asks you to install the zip
Click to expand...
Click to collapse
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
4ndyroid said:
Hi, thanks for the help, still didn't work even after flashing the noverity.zip but cheers anyway
Click to expand...
Click to collapse
which firmware version are installed on your phone? Have you tried flashing the official ROM from the ulefone site, then retried the process?
Have tried on both v3. 01 & v3. 03 firmwares. Stock firmware wasn't downloaded directly from ulefone site, imagine it will be the same but will give it a go.