Hi all
I could really use some help
I just got a huawei y520 and i cant root it
Its the first phone ive had that i cant do this
I have tried everything possible framaroot z4root vroot rootme towelroot and nothing works
It says fail because the system is read only so it cant install superuser or busybox
I dont have a computer so i cant try that
Is there anybody out there that has a solution ive looked everywhere and there is nothing so I'm posting here
Any help at all would be greatly appreciated
Cheers
Keithyzz32 said:
Hi all
I could really use some help
I just got a huawei y520 and i cant root it
Its the first phone ive had that i cant do this
I have tried everything possible framaroot z4root vroot rootme towelroot and nothing works
It says fail because the system is read only so it cant install superuser or busybox
I dont have a computer so i cant try that
Is there anybody out there that has a solution ive looked everywhere and there is nothing so I'm posting here
Any help at all would be greatly appreciated
Cheers
Click to expand...
Click to collapse
yes i have the same phone too, rooting it has been beyond me thus far. Tried everything i could even with a computer. Anyone with any help would be appreciated
Huawei y520 is published on 2014, December, so it is a new mobile. It is not so much popular and there is not strategy to root it. We just need to wait when rooting strategy appears.
Keithyzz32 said:
Hi all
I could really use some help
I just got a huawei y520 and i cant root it
Its the first phone ive had that i cant do this
I have tried everything possible framaroot z4root vroot rootme towelroot and nothing works
It says fail because the system is read only so it cant install superuser or busybox
I dont have a computer so i cant try that
Is there anybody out there that has a solution ive looked everywhere and there is nothing so I'm posting here
Any help at all would be greatly appreciated
Cheers
Click to expand...
Click to collapse
Ok after bricking 3 of those I finally figured how to root it.
usb debugging on, allow mock locations on
Install all your drivers.
use my scatter or make your own with MTK droid root& tool
load the scatter in SP flash tool, tick only recovery and load the recovery-cwm-y520.img after that turn phone off ( ididnt take battery out) and press download .
that will flash the y520 with the custom CWM.
unplug usb start phone.
Move UPDATE-SuperSU-v2.46.zip in phone storage.
reboot in recovery (the new CWM) and install zip from sdcard.
if u stuck somewhere just let me know
jbwyatt said:
Ok after bricking 3 of those I finally figured how to root it.
usb debugging on, allow mock locations on
Install all your drivers.
use my scatter or make your own with MTK droid root& tool
load the scatter in SP flash tool, tick only recovery and load the recovery-cwm-y520.img after that turn phone off ( ididnt take battery out) and press download .
that will flash the y520 with the custom CWM.
unplug usb start phone.
Move UPDATE-SuperSU-v2.46.zip in phone storage.
reboot in recovery (the new CWM) and install zip from sdcard.
if u stuck somewhere just let me know
Click to expand...
Click to collapse
My problem is that i cant reset my phone i try factory reset hard/aoft but it just says complete then when i boot everything is still there its getting to me
Ok after bricking 3 of those I finally figured how to root it.
usb debugging on, allow mock locations on
Install all your drivers.
use my scatter or make your own with MTK droid root& tool
load the scatter in SP flash tool, tick only recovery and load the recovery-cwm-y520.img after that turn phone off ( ididnt take battery out) and press download .
that will flash the y520 with the custom CWM.
unplug usb start phone.
Move UPDATE-SuperSU-v2.46.zip in phone storage.
reboot in recovery (the new CWM) and install zip from sdcard.
if u stuck somewhere just let me know
Click to expand...
Click to collapse
I'm also having a problem with rooting my Huawei Ascend Y520, and I'm new to rooting.
I've tried using Kingo Root, z4root, framaroot, but none worked.
I've also tried unlocking the bootloader, but I can't get my Product ID since the special code *#*#1357946#*#* won't work
Tried manually rooting it, but I don't think it would work.
Can't find anything else on the internet about rooting this specific phone except here.
I tried doing this but I'm stuck at the SP Flash Tool part
Won't download the cwm_recovery because it can't detect my phone.
I've downloaded the Huawei drivers.
What should I do?
finally my Huawei y520 is rooted !!
I was able to root my dear huawei using 360root app :victory: (the ultimate version of course)
I can't believe this :')
after several months and several trials I'm sooo excited !!
I made a video of it (copy and paste url) :
youtu.be/6Agj3e8js7g
HEY guys im already root my huawei y520-u22 ,using mobile go, it easy to root using that application on pc and android ..but my problem is to port cwm or twrp can we help me ,thanks
Now, finally, a custom Rom (4.4.2) is available for the y520
it's smoother than the stock Rom
:victory:
youtube link : (copy and paste in search bar)
youtube.com/watch?v=EsLZTGSiTpY&feature=youtu.be&hd=1
walkthrough
here is a short review of the cherry_ROM-v1 (copy and paste url) :
youtube.com/watch?v=wxuoqmf54PE
Can someone please post a link to download the ROM because the one under the video cannot download.
Sent from my DL750 using XDA Free mobile app
yes!!!! i have done it
ambyy said:
yes i have the same phone too, rooting it has been beyond me thus far. Tried everything i could even with a computer. Anyone with any help would be appreciated
Click to expand...
Click to collapse
it is very easy to root huwei y520....
first download "ROOT CHEKER BASIC" and"KINGROOT"
1. VERIFY ROOT.....it will show you fail.
2. open kingroot click for root..... then enjoy root...
jinen94 said:
here is a short review of the cherry_ROM-v1 (copy and paste url) :
youtube.com/watch?v=wxuoqmf54PE
Click to expand...
Click to collapse
How to install philz recovery? i try flashify nothing change ,, stock recovery pa din siya ..thanks
jinen94 said:
here is a short review of the cherry_ROM-v1 (copy and paste url) :
youtube.com/watch?v=wxuoqmf54PE
Click to expand...
Click to collapse
I downloaded the ROM, I have cwn so I tried to install it from thee but the installation is aborting. I don't know what to do.
Please help how to install recovery .. i have stock recovery ..
it doesn't work for me
Hardware : MT6572
Model : HUAWEI Y520-U22
Build number : Y520-U22V100R001C328B111
Build date UTC : 20141209-012743
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V36.F2.P9, 2014/11/11 17:44
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Tue Dec 9 09:26:07 CST 2014
help please
jerrypogs said:
HEY guys im already root my huawei y520-u22 ,using mobile go, it easy to root using that application on pc and android ..but my problem is to port cwm or twrp can we help me ,thanks
Click to expand...
Click to collapse
Can you please tell us how you rooted your Huawei Y520??
idontknowwhattoputinhere said:
Can you please tell us how you rooted your Huawei Y520??
Click to expand...
Click to collapse
Download mobile go on pc .. check usb debug ,then connect your huawei y520 on pc .automatic you'll get mobile go on your phone , after that ,,look root device on mobile go (pc) .. then wait ,,after that you will see android with check ,, hope you understand me
solution
bro you simply hae to download an app from google name as "king root" ... nd simply root t .. nd stay happy...
---------- Post added at 04:28 PM ---------- Previous post was at 04:23 PM ----------
use king root...
jbwyatt said:
Ok after bricking 3 of those I finally figured how to root it.
usb debugging on, allow mock locations on
Install all your drivers.
use my scatter or make your own with MTK droid root& tool
load the scatter in SP flash tool, tick only recovery and load the recovery-cwm-y520.img after that turn phone off ( ididnt take battery out) and press download .
that will flash the y520 with the custom CWM.
unplug usb start phone.
Move UPDATE-SuperSU-v2.46.zip in phone storage.
reboot in recovery (the new CWM) and install zip from sdcard.
if u stuck somewhere just let me know
Click to expand...
Click to collapse
cwm doesnot work
Related
I have problems with my Smartphone stock rom since i rooted and i deleted some system apps , i didn't installed cmw recovery just have stock recovery, the brand sent me the firmware via gmail and i downloaded it, i don't know how to install it its a zip file that contains : boot.img, cache.img, system.img and more, well i don't know what to do to install this to restore the phone rom PLEASE HELP ME!
mostevil94 said:
I have problems with my Smartphone stock rom since i rooted and i deleted some system apps , i didn't installed cmw recovery just have stock recovery, the brand sent me the firmware via gmail and i downloaded it, i don't know how to install it its a zip file that contains : boot.img, cache.img, system.img and more, well i don't know what to do to install this to restore the phone rom PLEASE HELP ME!
Click to expand...
Click to collapse
What is your phone?
just download your stock firmware and flash it with cwm. cmiiw :good:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
sent from Galaxy Young GT-S6310
ZonaRMR said:
What is your phone?
Click to expand...
Click to collapse
Hi thanks for reply, my hone is a new brand called Szenio from spain, a mediatek mt6582m processor phone called Szenio Syreni 50QHD, i can't find CMW recovery for this phone cause its not popular its new, they just sent me the firmware zip , with 378mb, i have windows 8 if there is any way to install this zip to my phone with any program.
bdkbdkbdk said:
just download your stock firmware and flash it with cwm. cmiiw :good:
I can't find a version of cmw recovery for my phone cause is recent, unpopular new brand Szenio, model Syreni 50QHD
They sent me just the zip with the rom but i don't know what to bo, if i had cmw but i can't find a version for my phone.
Click to expand...
Click to collapse
mostevil94 said:
Hi thanks for reply, my hone is a new brand called Szenio from spain, a mediatek mt6582m processor phone called Szenio Syreni 50QHD, i can't find CMW recovery for this phone cause its not popular its new, they just sent me the firmware zip , with 378mb, i have windows 8 if there is any way to install this zip to my phone with any program.
Click to expand...
Click to collapse
This will help you, visit this link http://forum.xda-developers.com/showthread.php?t=1982587 : Bueno:
you should restore the backup u had made before flashing anything:good:
new_at_this(jatin) said:
you should restore the backup u had made before flashing anything:good:
Click to expand...
Click to collapse
I didn't had anything to do, with stock recovery i can't do anything just factory reset, i just rooted phone with Framaroot and i deleted some system apps with a app form play store, i got a force close error when i go to display settings.
ZonaRMR said:
This will help you, visit this link http://forum.xda-developers.com/showthread.php?t=1982587 : Bueno:
Click to expand...
Click to collapse
I downloaded latest version of SP Flash tool , mtk usb drivers for windows 8, when iopen flash tool and i select scatter file i press download , after i connect smartphone in the bottom right - Mediatek preloader USB VCOM port (COM3) and get stuck at 0% of process, don't show any progress bar with red just 0%, other version of SD Flash tool i get erorr after red progress : error 8200, i don't know what to do, what is the problem.
mostevil94 said:
I downloaded latest version of SP Flash tool , mtk usb drivers for windows 8, when iopen flash tool and i select scatter file i press download , after i connect smartphone in the bottom right - Mediatek preloader USB VCOM port (COM3) and get stuck at 0% of process, don't show any progress bar with red just 0%, other version of SD Flash tool i get erorr after red progress : error 8200, i don't know what to do, what is the problem.
Click to expand...
Click to collapse
You must load the correct scatter file (in your case mt6582), turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
Thankx Buddy Its Work
Thanks
Thanks it worked. And Odin is also the best way to go.
ZonaRMR said:
You must load the correct scatter file (in your case mt6582), turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear.
Click to expand...
Click to collapse
I put the scatter from my firmware, its name is MT6589_Android_scatter_emmc, i don't know hwy is mt6589 since my phone has mt6582 or mt6582m, by the way, can you help me to get scatter for mt6582? thank you very much for help.
mostevil94 said:
I put the scatter from my firmware, its name is MT6589_Android_scatter_emmc, i don't know hwy is mt6589 since my phone has mt6582 or mt6582m, by the way, can you help me to get scatter for mt6582? thank you very much for help.
Click to expand...
Click to collapse
I'm confused, I searched specifications of your phone and says I have a mt6582m processor and on the other hand said to have a mt6589!
which specification is correct?
ZonaRMR said:
I'm confused, I searched specifications of your phone and says I have a mt6582m processor and on the other hand said to have a mt6589!
which specification is correct?
Click to expand...
Click to collapse
I send you link with original specs.
Hi,
please, can help me to find stock ROM with scatter file for Syreni-50 qhd my device not booting
thanks
Need Help LAVA iris 504q+
Please provide the stock rom for lava iris 504q plus
i have bricked my phone and need it urgently
Stock rom
downloadwww31.adrive.com/public/view/Rpt2ww.html
Link doesnt work
Please provide another link
will that work?
shubham56 said:
Link doesnt work
Please provide another link
Click to expand...
Click to collapse
is the stock recovery working dude??
sophisticatedjoker said:
is the stock recovery working dude??
Click to expand...
Click to collapse
nah dude
bt i got cwm somehow working
plz post d rom i need it urgently
cwm
shubham56 said:
plz post d rom i need it urgently
Click to expand...
Click to collapse
post ur cwm package here ..i'll extract the rom from my device and give that to you
but u may need to remove the bootloader
u can install cwm via mtk droid tools...its easy
follow these steps
Things to necessary---
*Mtk droid tool
*Rooted phone
*usb driver must be installed
*enable usb debbuging
STEPS:-
* Connect your switched on rooted mtk device to your computer and open MTKDroid tool, the tool will recognise your device and connect to it, if the colour indicator in the bottom left corner is green, you already have root shell,and can go on to the next step, if it is yellow, click on the root button at the bottom, and wait for the progress. When the indicator turns to green you have root shell which is necessary for this operation.
* Next click on the tab 'root,backup,recovery' and select 'to use boot from phone' then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to 'make cwm recovery automatically' click yes.
* The tool will then create the recovery and another dialogue box will appear asking to 'install created recovery to phone', click yes.
*finally cwm has been installed.
shubham56 said:
u can install cwm via mtk droid tools...its easy
follow these steps
Things to necessary---
*Mtk droid tool
*Rooted phone
*usb driver must be installed
*enable usb debbuging
STEPS:-
* Connect your switched on rooted mtk device to your computer and open MTKDroid tool, the tool will recognise your device and connect to it, if the colour indicator in the bottom left corner is green, you already have root shell,and can go on to the next step, if it is yellow, click on the root button at the bottom, and wait for the progress. When the indicator turns to green you have root shell which is necessary for this operation.
* Next click on the tab 'root,backup,recovery' and select 'to use boot from phone' then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to 'make cwm recovery automatically' click yes.
* The tool will then create the recovery and another dialogue box will appear asking to 'install created recovery to phone', click yes.
*finally cwm has been installed.
Click to expand...
Click to collapse
Hoe to root the phone in kitkat 4.4.2???
i tried framaroot,towelroot and kongo via PC
in framaroot it shows error 9
terrors94 said:
Hoe to root the phone in kitkat 4.4.2???
i tried framaroot,towelroot and kongo via PC
in framaroot it shows error 9
Click to expand...
Click to collapse
Check this out VROOT for PC
Download- http://www.mediafire.com/download/v3e3mtgxp1khlar/VRoot_1.6.0.3690_Setup.exe
root any phone in three steps
1>download ,install and open V Root
2>enable usb debugging and connect your phone
3>after it recognizes 504q+ click on root,it will reboot ur phone 3-4 times and when you see a 'TICK' sign
surprise surprise u have rooted ur phone
I m attaching my cwm package too
hope dis helps...
N dont forget to hit thanks if dis helps
Shubham is your phone rooted and is cwm installed pls help me too i also have 504q+
srb007 said:
Shubham is your phone rooted and is cwm installed pls help me too i also have 504q+
Click to expand...
Click to collapse
i have given the root guide on prev page
for cwm
download the cwm package
extract it and rename both files to recovery(retain the extensions)
copy to your sd card
download mobile uncle mtk tools
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
choose the recovery option
and select the copied recovery and press yes
done
kitkat update.zip require
shubham56 said:
i have given the root guide on prev page
for cwm
download the cwm package
extract it and rename both files to recovery(retain the extensions)
copy to your sd card
download mobile uncle mtk tools
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
choose the recovery option
and select the copied recovery and press yes
done
Click to expand...
Click to collapse
Shubham Can you provide me kitkat update.zip ??? i hav rooted and CWM installed ..........
Hi guys, I have rooted my 504q+ and installed carliv touch recovery, now I can't get kitkat update, please upload stock recovery img and kitkat update.
Thanks in advance.
Asking for password to download
nitish103 said:
downloadwww31.adrive.com/public/view/Rpt2ww.html
Click to expand...
Click to collapse
Hi dude,,, i am trying to flash this stock rom.... when i try to download it, its asking for password... please provide.....
shubham56 said:
Check this out VROOT for PC
Download- http://www.mediafire.com/download/v3e3mtgxp1khlar/VRoot_1.6.0.3690_Setup.exe
root any phone in three steps
1>download ,install and open V Root
2>enable usb debugging and connect your phone
3>after it recognizes 504q+ click on root,it will reboot ur phone 3-4 times and when you see a 'TICK' sign
surprise surprise u have rooted ur phone
I m attaching my cwm package too
hope dis helps...
N dont forget to hit thanks if dis helps
Click to expand...
Click to collapse
above setup file is in chiness.......do you have English version......Don't know how to root since can't understand language
Root by update-Su2.0.zip through cwm
Sent from my 504Q+ using Tapatalk
Any Developer Please Help us...
nitish103 said:
Root by update-Su2.0.zip through cwm
Sent from my 504Q+ using Tapatalk
Click to expand...
Click to collapse
How to root with this.... please provide steps or helpful link...
Any Developer please help us to ROOT Lava Iris 504Q+ after upgrading to KitKat 4.4.2
Please.....
need sctter file for iris504q+
Softbricked my phone as I was updating to 4.4.2 (>.<)
Can anyone plz give me scatter file so that I can flash cwm and restore my cwm backup
Any other help will be really great.
As I start my phone it just boots to stock recovery.
Just want to boot in cwm instead plz help.
This is How to Unbrick Lava Iris 504Q+
theprozaic said:
Softbricked my phone as I was updating to 4.4.2 (>.<)
Can anyone plz give me scatter file so that I can flash cwm and restore my cwm backup
Any other help will be really great.
As I start my phone it just boots to stock recovery.
Just want to boot in cwm instead plz help.
Click to expand...
Click to collapse
Bro.... download the STOCK ROM of 4.2.2 from here...
http://androidxda.com/download-lava-stock-rom-firmware
and follow the instructions given there to flash it manually...... Done.... your phone is back with all out of the box features.......
Give me a THANKS if i Helped....... :good:
Good day all. I have a Lenovo A3300 (A7-30) tablet. I have downloaded and installed Online Nandroid Backup and have created a backup for restore. I have scoured the net for a custom recovery and have failed to find one.
1.Has anyone come across a custom recovery?
2.Is there any way to flash a nandroid backup without a custom recovery?
3. Is there a generic custom recovery for a MTK8382 device running 4.2.2?
Thanks in advance for your time and help.
RASTAS12 said:
Good day all. I have a Lenovo A3300 (A7-30) tablet. I have downloaded and installed Online Nandroid Backup and have created a backup for restore. I have scoured the net for a custom recovery and have failed to find one.
1.Has anyone come across a custom recovery?
2.Is there any way to flash a nandroid backup without a custom recovery?
3. Is there a generic custom recovery for a MTK8382 device running 4.2.2?
Thanks in advance for your time and help.
Click to expand...
Click to collapse
Alternately does anyone know of any tools for the MTK 8283 or a custom recovery?
Were you able to find it's solution. I also have Lenovo Tab A3300 and looking for it's custom recovery. Some one please help me with this.
Sorry I never managed to find anything for this specific tab. If you ever find a custom recovery please let me know!
RASTAS12 said:
Sorry I never managed to find anything for this specific tab. If you ever find a custom recovery please let me know!
Click to expand...
Click to collapse
I did manage to root the device using method i found on the internet,but havent found a way yet to install a Custom recovery.
jasonbourne95 said:
I did manage to root the device using method i found on the internet,but havent found a way yet to install a Custom recovery.
Click to expand...
Click to collapse
Thanks for the reply.
This thread should be more active seeing so many people have this tablet
Sent from my LenovoA3300-GV using XDA Free mobile app
jasonbourne95 said:
This thread should be more active seeing so many people have this tablet
Sent from my LenovoA3300-GV using XDA Free mobile app
Click to expand...
Click to collapse
I agree. I have actually moved on from this device as there is too little development for it unfrt.
Lenovo has released the source code for this device,sadly I am new to this device and don't know what to do with it.
Sent from my LenovoA3300-GV using XDA Free mobile app
CWM recovery a3300(a7-30) Lenovo
Hi all i have compiled successfully cwm recovery for our a7-30 lenovo a3300 tablet.
Before starting the process make sure you have installed all required drivers.
go to http://d-h.st/D0y for automatic driver installer.
process to flash
1)open sp flash tool(download the latest version)
2)download all attachment from this post and keep all them on one place.
3)open scatter loading
4)select scatter file from attachment
5)it will itself select boot and recovery
6)select download then yes
7)switch off the tab and insert data cable
8)when its done it will automatically stop and a logo with success appear
9)done! open recovery mode by (vol+)+power button
Do it on your own risk
Your warranty is void now
don't forget to hit thanks if found useful
binary counter reset in lenovo a7 30
i have previously rooted my lenovo a7 30 then i performed full unroot, can stil manufacturer know that my phone was rooted??. some sort of binary counter!?. how to reset that.??
You bricked my tablet
Diwakar1990 said:
Hi all i have compiled successfully cwm recovery for our a7-30 lenovo a3300 tablet.
Before starting the process make sure you have installed all required drivers.
go to for automatic driver installer.
process to flash
1)open sp flash tool(download the latest version)
2)download all attachment from this post and keep all them on one place.
3)open scatter loading
4)select scatter file from attachment
5)it will itself select boot and recovery
6)select download then yes
7)switch off the tab and insert data cable
8)when its done it will automatically stop and a logo with success appear
9)done! open recovery mode by (vol+)+power button
Do it on your own risk
Your warranty is void now
don't forget to hit thanks if found useful
Click to expand...
Click to collapse
Well. Nice idea to brick each other's tablet. This doesn't work, idiot!
Well it say DO IT ON YOUR OWN RISK! So its definitely your fault for bricking your tab.
What possible need is there to tell the guy this seven months after?
Sent from my SM-G386T1 using Tapatalk
Im only saying.........
Diwakar1990 said:
Hi all i have compiled successfully cwm recovery for our a7-30 lenovo a3300 tablet.
Before starting the process make sure you have installed all required drivers.
go to http://d-h.st/D0y for automatic driver installer.
process to flash
1)open sp flash tool(download the latest version)
2)download all attachment from this post and keep all them on one place.
3)open scatter loading
4)select scatter file from attachment
5)it will itself select boot and recovery
6)select download then yes
7)switch off the tab and insert data cable
8)when its done it will automatically stop and a logo with success appear
9)done! open recovery mode by (vol+)+power button
Do it on your own risk
Your warranty is void now
don't forget to hit thanks if found useful
Click to expand...
Click to collapse
Any idea how to loading cmw recovery without install it
For those still interested:
This thread page 3, mentions using MTK droid tools to flash CWM. This after rooting with kingoroot.
RASTAS12 said:
Good day all. I have a Lenovo A3300 (A7-30) tablet. I have downloaded and installed Online Nandroid Backup and have created a backup for restore. I have scoured the net for a custom recovery and have failed to find one.
1.Has anyone come across a custom recovery?
2.Is there any way to flash a nandroid backup without a custom recovery?
3. Is there a generic custom recovery for a MTK8382 device running 4.2.2?
Thanks in advance for your time and help.
Click to expand...
Click to collapse
There are many I can't paste links but I got a CWM and twrp
My tab is now bricked, recovery is there but not booting. How to fix ?
:crying:
Diwakar1990 said:
Hi all i have compiled successfully cwm recovery for our a7-30 lenovo a3300 tablet.
Before starting the process make sure you have installed all required drivers.
for automatic driver installer.
process to flash
1)open sp flash tool(download the latest version)
2)download all attachment from this post and keep all them on one place.
3)open scatter loading
4)select scatter file from attachment
5)it will itself select boot and recovery
6)select download then yes
7)switch off the tab and insert data cable
8)when its done it will automatically stop and a logo with success appear
9)done! open recovery mode by (vol+)+power button
Do it on your own risk
Your warranty is void now
don't forget to hit thanks if found useful
Click to expand...
Click to collapse
yeah...
tnot that recovery the guy gave here.
Go in this thread: http://forum.xda-developers.com/android/development/lenovo-tab-a7-30-a3300-development-t3346048
in this thread, you will find a lot of things for your A7-30 A3300 tablet, for G/GV, W/H/HV and T models.
the TWRP version is 3.0, material design, there, in that thread.
Good luck! Also, it's up to you to thank this post.
hi friends! How to root my wiko robby??
kingroot dont work.
thanks!
not available?
I tried every method to root it but it says "not supported"
hi buddy, have you found a way?
_try this
For rooting the Wiko Robby smartphone with Android 6.0 Marshmallow, you first need to flash a custom recovery. Secondly, you will need to install SuperSU binaries. Before you proceed with this guide, make a full backup so as not to lose any of your personal files.
Than..
ROOT WIKO ROBBY WITH SP_FLASH_TOOL
_Prepare your Device before Rooting_
Download and install the MTK6580 drivers on your PC. (You can search in google)
Download the TWRP recovery for Wiko Robby and extract it to the desktop of your computer, preferably.
Download the latest version of SP-Flash-Tool and extract it on your PC.
Connect the device to the USB port and copy the file Supersu2.74.zip to the main memory of the phone.
Disconnect the USB cable and turn off your phone.
_How to flash TWRP on wiko robby_
Open the SP-Flash-Tool and click on Scatter-loading and select MTK6580_Android_scatter.
Next click on the RECOVERY box, click on the green field and select the recovery.img file. All other boxes must be unchecked.
Click Download and connect Wiko Robby to PC via USB.
The tool will detect your phone immediately and start the task.
After a few seconds, the process will be finished and you will get the Download OK notification.
_Install SuperSU on Wiko Robby_
Hold the volume + power buttons until the phone is restarted in recovery mode.
Backup active partitions of the phone and copy it to external memory (optional but highly recommended).
Press install and load the SuperSU.zip file that we copied previously in the memory of Wiko Robby.
Accept the installation and wait for a few seconds until it is finished.
Finally we restart the device with the Reboot option.
Done! Your Wiko Robby is now ROOTED.
Note :_
I am not responsible for any damage incurred.
So consider it carefully before you taking action
GOODLUCK... : Jari-menyeberang:
Hi to all,
I tryed but nothing is hapening with the SP Tool.....maybe something else?
Hey there,
is there a way to root without PC?
My USB doesnt working correctly, it only charge my Phone.
Root wiko robby
Hi everyone , i tried the pc method using sp flash tool and a costum recovery , i flashed the zip but when i try to turn on the phone i cnt , i tried to wipe data and cash but still the same problm, any sollutions to root this phone ? Plz
Read this important message!
wolfxam said:
hi friends! How to root my wiko robby??
kingroot dont work.
thanks!
Click to expand...
Click to collapse
Ryoshin99 said:
I tried every method to root it but it says "not supported"
Click to expand...
Click to collapse
RushL_an said:
hi buddy, have you found a way?
_try this
For rooting the Wiko Robby smartphone with Android 6.0 Marshmallow, you first need to flash a custom recovery. Secondly, you will need to install SuperSU binaries. Before you proceed with this guide, make a full backup so as not to lose any of your personal files.
Than..
ROOT WIKO ROBBY WITH SP_FLASH_TOOL
_Prepare your Device before Rooting_
Download and install the MTK6580 drivers on your PC. (You can search in google)
Download the TWRP recovery for Wiko Robby and extract it to the desktop of your computer, preferably.
Download the latest version of SP-Flash-Tool and extract it on your PC.
Connect the device to the USB port and copy the file Supersu2.74.zip to the main memory of the phone.
Disconnect the USB cable and turn off your phone.
_How to flash TWRP on wiko robby_
Open the SP-Flash-Tool and click on Scatter-loading and select MTK6580_Android_scatter.
Next click on the RECOVERY box, click on the green field and select the recovery.img file. All other boxes must be unchecked.
Click Download and connect Wiko Robby to PC via USB.
The tool will detect your phone immediately and start the task.
After a few seconds, the process will be finished and you will get the Download OK notification.
_Install SuperSU on Wiko Robby_
Hold the volume + power buttons until the phone is restarted in recovery mode.
Backup active partitions of the phone and copy it to external memory (optional but highly recommended).
Press install and load the SuperSU.zip file that we copied previously in the memory of Wiko Robby.
Accept the installation and wait for a few seconds until it is finished.
Finally we restart the device with the Reboot option.
Done! Your Wiko Robby is now ROOTED.
Note :_
I am not responsible for any damage incurred.
So consider it carefully before you taking action
GOODLUCK... : Jari-menyeberang:
Click to expand...
Click to collapse
gvanels said:
Hi to all,
I tryed but nothing is hapening with the SP Tool.....maybe something else?
Click to expand...
Click to collapse
Xylit said:
Hey there,
is there a way to root without PC?
My USB doesnt working correctly, it only charge my Phone.
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi guys!
Root Apps don't work. Even i had the same prob, until then i made a TWRP for my device and flashed SuperSU zip which finally roots the phone successfully.
Anyways for TWRP and detailed instructions, do check THIS POST AND FOLLOW EVERY STEP PERFECTLY
and for Rooting and detailed instructions, do check [URL="https://forum.xda-developers.com/showpost.php?p=73123115&postcount=6]THIS POST AND FOLLOW EVERY STEP PERFECTLY[/URL]
This is meant for my device Micromax Canvas Fire 5 Q386 but hope it works for Wikko Robby too, as both the devices are 98 % the same!
If it doesnt work, then DON'T WORRY just give me a message, I will port a TWRP for ur device!
If works please do hit the thanks button!
Thanks, but there is one Problem.
My Phone doesnt Detect USB Connections...
Only Charge, no USB Detection.
I trief it on Linux with lsusb, no detection.
Windows and the Device Manager, no detection.
mr_unpredictable said:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi guys!
Root Apps don't work. Even i had the same prob, until then i made a TWRP for my device and flashed SuperSU zip which finally roots the phone successfully.
Anyways for TWRP and detailed instructions, do check THIS POST AND FOLLOW EVERY STEP PERFECTLY
and for Rooting and detailed instructions, do check THIS POST AND FOLLOW EVERY STEP PERFECTLY
This is meant for my device Micromax Canvas Fire 5 Q386 but hope it works for Wikko Robby too, as both the devices are 98 % the same!
If it doesnt work, then DON'T WORRY just give me a message, I will port a TWRP for ur device!
If works please do hit the thanks button!
Click to expand...
Click to collapse
Hi guys, I rooted my device with magisk manager, and it works very smoothly...
root wiko robby
hi guys the easy way to root wiko robby is by using the magisk manager apk wich is available on the forum , all u need to do is to download the app and install it on ur device , open the app and select intall and download the magisk zip file , the next step u need to do is to install the zip file via costum recovery ,,,,,, now im not sur if it works on the wiko's recovery but i personaly instaled the zip with TWRP , and reboot ur device and BOOM go again to the magisk app now u should hv root access . if u dont have a TWRP recovery you can download it here on the forum and flash it with SP flash tool ... hope that i help u guys try it and contact me if u need help , also this app will not work if u have SLIM 6 rom on your wiko robby , it works only on the original rom . thanks
root wiko robby
Xylit said:
Thanks, but there is one Problem.
My Phone doesnt Detect USB Connections...
Only Charge, no USB Detection.
I trief it on Linux with lsusb, no detection.
Windows and the Device Manager, no detection.
Click to expand...
Click to collapse
hi guys the easy way to root wiko robby is by using the magisk manager apk wich is available on the forum , all u need to do is to download the app and install it on ur device , open the app and select intall and download the magisk zip file , the next step u need to do is to install the zip file via costum recovery ,,,,,, now im not sur if it works on the wiko's recovery but i personaly instaled the zip with TWRP , and reboot ur device and BOOM go again to the magisk app now u should hv root access . if u dont have a TWRP recovery you can download it here on the forum and flash it with SP flash tool ... hope that i help u guys try it and contact me if u need help , also this app will not work if u have SLIM 6 rom on your wiko robby , it works only on the original rom . thanks
Ryoshin99 said:
hi guys the easy way to root wiko robby is by using the magisk manager apk wich is available on the forum , all u need to do is to download the app and install it on ur device , open the app and select intall and download the magisk zip file , the next step u need to do is to install the zip file via costum recovery ,,,,,, now im not sur if it works on the wiko's recovery but i personaly instaled the zip with TWRP , and reboot ur device and BOOM go again to the magisk app now u should hv root access . if u dont have a TWRP recovery you can download it here on the forum and flash it with SP flash tool ... hope that i help u guys try it and contact me if u need help , also this app will not work if u have SLIM 6 rom on your wiko robby , it works only on the original rom . thanks
Click to expand...
Click to collapse
USELESS AS ****!
Magisk is the most stubborn way of rooting any android.
All it does is partial root. [That means your phone is not rooted fully]
To root ur phone to the full extent, you have to flash SuperSU within TWRP.
So follow my guide.
Else happy temporary root.
Root wiko robby
mr_unpredictable said:
USELESS AS ****!
Magisk is the most stubborn way of rooting any android.
All it does is partial root. [That means your phone is not rooted fully]
To root ur phone to the full extent, you have to flash SuperSU within TWRP.
So follow my guide.
Else happy temporary root.
Click to expand...
Click to collapse
But this way will not work i tried it before on 3 wiko robby phones ,, wont reboot after flashing the ZIP ,, So magisk is the only way to at least patch boot image i know its not a réal root BT it works ,,
Ryoshin99 said:
But this way will not work i tried it before on 3 wiko robby phones ,, wont reboot after flashing the ZIP ,, So magisk is the only way to at least patch boot image i know its not a réal root BT it works ,,
Click to expand...
Click to collapse
Honestly you could have tried the method what i had mentioned.
Coz my device Q386 and robby are 10000000000000000000% identical.
And i doubt it will fail.
NEVER rely too much on magisk!
Trust me!
I found it useless.
Only thing what it does it, it doesnt modify system files [thats senseless], unless you have full root it doesnt make any sense.
Yeah your wish btw.
Ciao!
Foot wiko robby
mr_unpredictable said:
Honestly you could have tried the method what i had mentioned.
Coz my device Q386 and robby are 10000000000000000000% identical.
And i doubt it will fail.
NEVER rely too much on magisk!
Trust me!
I found it useless.
Only thing what it does it, it doesnt modify system files [thats senseless], unless you have full root it doesnt make any sense.
Yeah your wish btw.
Ciao!
Click to expand...
Click to collapse
I tried it yesterday and it didnt work , when ever i flash the superSU ZIP the phone wont boot ,, it worked only with the slim ROM ,, i tried it with XOS and original they both didnt work
Ryoshin99 said:
I tried it yesterday and it didnt work , when ever i flash the superSU ZIP the phone wont boot ,, it worked only with the slim ROM ,, i tried it with XOS and original they both didnt work
Click to expand...
Click to collapse
try different version of supersu.zip.
it will surely work.
had this prob too.
different version of su will work.
Problem
mr_unpredictable said:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi guys!
Root Apps don't work. Even i had the same prob, until then i made a TWRP for my device and flashed SuperSU zip which finally roots the phone successfully.
Anyways for TWRP and detailed instructions, do check THIS POST AND FOLLOW EVERY STEP PERFECTLY
and for Rooting and detailed instructions, do check [URL="https://forum.xda-developers.com/showpost.php?p=73123115&postcount=6]THIS POST AND FOLLOW EVERY STEP PERFECTLY[/URL]
This is meant for my device Micromax Canvas Fire 5 Q386 but hope it works for Wikko Robby too, as both the devices are 98 % the same!
If it doesnt work, then DON'T WORRY just give me a message, I will port a TWRP for ur device!
If works please do hit the thanks button!
Click to expand...
Click to collapse
-------------------------------------------------------------------
Hey i tried to root my wiko Robby it's my first time rooting a phone and I had no idea how that worked than I watched a ton of YouTube Videos but they didn't helped me because there is almost no information about the phone and how to root it I tried every step in your guide but it didn't work:crying: so here's my question could you make me a twrp for wiko Robby where you tell me how to install it and root my phone or a link to a side where it is good described. I know it's hard but your my last hope to root my phone
Bye, Tobias Reaper
Help me
How to Root Wiko Robby 2 ?
Tobias Reaper said:
-------------------------------------------------------------------
Hey i tried to root my wiko Robby it's my first time rooting a phone and I had no idea how that worked than I watched a ton of YouTube Videos but they didn't helped me because there is almost no information about the phone and how to root it I tried every step in your guide but it didn't work:crying: so here's my question could you make me a twrp for wiko Robby where you tell me how to install it and root my phone or a link to a side where it is good described. I know it's hard but your my last hope to root my phone
Bye, Tobias Reaper
Click to expand...
Click to collapse
Check my thread "Q386 Zone" on my profile
Hello! Is there a way to root my Allview P7 Pro? I haven't found any app/software to root it. It would be nice if someone knows how to root it. If someone need info about the phone I can write it down later. Thanks in advice
TWRP 3.0.3 for Allview P7 Pro
TWRP 3.0.3 for Allview P7 Pro (mt6737t)
Based on Android 6.0 firmware ver.P7_PRO / Fri Sep 9 08:34:39 CST 2016
jemmini said:
TWRP 3.0.3 for Allview P7 Pro (mt6737t)
Based on Android 6.0 firmware ver.P7_PRO / Fri Sep 9 08:34:39 CST 2016
Click to expand...
Click to collapse
Is this working?
GalaxyRSR said:
Is this working?
Click to expand...
Click to collapse
yes
jemmini said:
yes
Click to expand...
Click to collapse
I'll try it Thank you so much
Um...I moved it to my phone..but I cant find the files in recovery..
jemmini said:
yes
Click to expand...
Click to collapse
moved to sd card..but I cant install it..it says installation aborted :c
GalaxyRSR said:
Hello! Is there a way to root my Allview P7 Pro? I haven't found any app/software to root it. It would be nice if someone knows how to root it. If someone need info about the phone I can write it down later. Thanks in advice
Click to expand...
Click to collapse
Hi.
If someone want to root this phone Allview P7 Pro you can do it by flashing TWRP and then SuperSU.
Here is the link for TWRP: https://drive.google.com/file/d/0B3-CwjCz7AuhdmRCR01TcHZvWkU/view?usp=drivesdk
You need to flash this with Sp flash tool http://spflashtool.com then from TWRP install Super Su https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133 and reboot.
I've rooted mine.
Good luck.
Thanks. Can I link this post in another forum? Cuz some other ppl would like to root their devices too..
GalaxyRSR said:
Thanks. Can I link this post in another forum? Cuz some other ppl would like to root their devices too..
Click to expand...
Click to collapse
Yes
Help
Can someone help me root my P7 PRO step by step? I really want to get rid to bloatware
Naicht said:
Can someone help me root my P7 PRO step by step? I really want to get rid to bloatware
Click to expand...
Click to collapse
First of all. The download the required files.
- TWRP Recovery
-Super SU
-SP Flash Tool
1) On your PC open up the Flash Tool, on the scatter select the file you have downloaded before.
(Before you proceed make sure you have enabled the Developer options by going to Settings -> About Phone -> And click the Build number until you see a little box saying that "You are now a developer". Now go back and head to advanced settings and go all the way down, where you'll see the Developer Options, go in, look for USB Debugging and turn it on.)
2)Move the Super SU zip file to your phone or SD card.
3) Now turn off your phone, click Download and connect your phone via USB cable and the process should start. A window should pop up saying Download Complete, and click OK.
4)Now disconnect your phone, press the Volume up button then the Power button until the screen lights up, then release it. The recovery should start up.
5)Now click Install and navigate to the file. The install and the interface is pretty simple so you won't have problems during it. After the installation is completed, click Reboot System and wait until the phone start up. Done!
Pls tell us if you don't understand something. (Sorry if I made a grammar mistake, but English is not my main language)
GOOD LUCK!
Nice!!!
jemmini said:
TWRP 3.0.3 for Allview P7 Pro (mt6737t)
Based on Android 6.0 firmware ver.P7_PRO / Fri Sep 9 08:34:39 CST 2016
Click to expand...
Click to collapse
ROOTED!
Many thanks my friend!
Easy peasy root method... now, let's go further, I'm mean, peoples who know what should be done, DEV people like...
Thank YOU again!!!
Klaus
I tried this twice and went with my phone to warranty 2 times. Cand someobe please tell me what have i done wrong? After installing TWRP OS stopped to boot (TWRP was working). I installed SuperSu and then the phone bricked. After some trying to restore it i ended up with the OS wiped....then i went to warranty. Is it because i installed Twrp with fastboot, i mean do i really need flash tool? Thanks in advance :3
Sketch RPG2 said:
I tried this twice and went with my phone to warranty 2 times. Cand someobe please tell me what have i done wrong? After installing TWRP OS stopped to boot (TWRP was working). I installed SuperSu and then the phone bricked. After some trying to restore it i ended up with the OS wiped....then i went to warranty. Is it because i installed Twrp with fastboot, i mean do i really need flash tool? Thanks in advance :3
Click to expand...
Click to collapse
I think it's time to try with flash tool.
panda822 said:
I think it's time to try with flash tool.
Click to expand...
Click to collapse
I FINALLY GOT IT WORKING!!!!
For those who think that their phone got bricked, listen 'ere.
After i installed TWRP phone stopped booting, it got in bootloop (i was able to get in recovery)
If this happens to you to, just install SuperSU (the exact version that is on the first page, first reply), it installs another boot image that will work. Your phone should boot properly now ( it might take up to 5 minutes to first boot, it happend to me, i got worried but it was alright).
Thank you so much, now i can finally do WHATEVER I WANT with my phone.
Hey. Is there a way to unroot the phone? I've tried to do it by unrooting within the SuperSU app but without succes.
GalaxyRSR said:
Hey. Is there a way to unroot the phone? I've tried to do it by unrooting within the SuperSU app but without succes.
Click to expand...
Click to collapse
Flash back the stock ROM
I don't have the stock ROM. Only the stock recovery..
GalaxyRSR said:
I don't have the stock ROM. Only the stock recovery..
Click to expand...
Click to collapse
https://firmwarefile.com/gionee-p7