Good day all. I have a Lenovo A3300 (A7-30) tablet. I have downloaded and installed Online Nandroid Backup and have created a backup for restore. I have scoured the net for a custom recovery and have failed to find one.
1.Has anyone come across a custom recovery?
2.Is there any way to flash a nandroid backup without a custom recovery?
3. Is there a generic custom recovery for a MTK8382 device running 4.2.2?
Thanks in advance for your time and help.
RASTAS12 said:
Good day all. I have a Lenovo A3300 (A7-30) tablet. I have downloaded and installed Online Nandroid Backup and have created a backup for restore. I have scoured the net for a custom recovery and have failed to find one.
1.Has anyone come across a custom recovery?
2.Is there any way to flash a nandroid backup without a custom recovery?
3. Is there a generic custom recovery for a MTK8382 device running 4.2.2?
Thanks in advance for your time and help.
Click to expand...
Click to collapse
Alternately does anyone know of any tools for the MTK 8283 or a custom recovery?
Were you able to find it's solution. I also have Lenovo Tab A3300 and looking for it's custom recovery. Some one please help me with this.
Sorry I never managed to find anything for this specific tab. If you ever find a custom recovery please let me know!
RASTAS12 said:
Sorry I never managed to find anything for this specific tab. If you ever find a custom recovery please let me know!
Click to expand...
Click to collapse
I did manage to root the device using method i found on the internet,but havent found a way yet to install a Custom recovery.
jasonbourne95 said:
I did manage to root the device using method i found on the internet,but havent found a way yet to install a Custom recovery.
Click to expand...
Click to collapse
Thanks for the reply.
This thread should be more active seeing so many people have this tablet
Sent from my LenovoA3300-GV using XDA Free mobile app
jasonbourne95 said:
This thread should be more active seeing so many people have this tablet
Sent from my LenovoA3300-GV using XDA Free mobile app
Click to expand...
Click to collapse
I agree. I have actually moved on from this device as there is too little development for it unfrt.
Lenovo has released the source code for this device,sadly I am new to this device and don't know what to do with it.
Sent from my LenovoA3300-GV using XDA Free mobile app
CWM recovery a3300(a7-30) Lenovo
Hi all i have compiled successfully cwm recovery for our a7-30 lenovo a3300 tablet.
Before starting the process make sure you have installed all required drivers.
go to http://d-h.st/D0y for automatic driver installer.
process to flash
1)open sp flash tool(download the latest version)
2)download all attachment from this post and keep all them on one place.
3)open scatter loading
4)select scatter file from attachment
5)it will itself select boot and recovery
6)select download then yes
7)switch off the tab and insert data cable
8)when its done it will automatically stop and a logo with success appear
9)done! open recovery mode by (vol+)+power button
Do it on your own risk
Your warranty is void now
don't forget to hit thanks if found useful
binary counter reset in lenovo a7 30
i have previously rooted my lenovo a7 30 then i performed full unroot, can stil manufacturer know that my phone was rooted??. some sort of binary counter!?. how to reset that.??
You bricked my tablet
Diwakar1990 said:
Hi all i have compiled successfully cwm recovery for our a7-30 lenovo a3300 tablet.
Before starting the process make sure you have installed all required drivers.
go to for automatic driver installer.
process to flash
1)open sp flash tool(download the latest version)
2)download all attachment from this post and keep all them on one place.
3)open scatter loading
4)select scatter file from attachment
5)it will itself select boot and recovery
6)select download then yes
7)switch off the tab and insert data cable
8)when its done it will automatically stop and a logo with success appear
9)done! open recovery mode by (vol+)+power button
Do it on your own risk
Your warranty is void now
don't forget to hit thanks if found useful
Click to expand...
Click to collapse
Well. Nice idea to brick each other's tablet. This doesn't work, idiot!
Well it say DO IT ON YOUR OWN RISK! So its definitely your fault for bricking your tab.
What possible need is there to tell the guy this seven months after?
Sent from my SM-G386T1 using Tapatalk
Im only saying.........
Diwakar1990 said:
Hi all i have compiled successfully cwm recovery for our a7-30 lenovo a3300 tablet.
Before starting the process make sure you have installed all required drivers.
go to http://d-h.st/D0y for automatic driver installer.
process to flash
1)open sp flash tool(download the latest version)
2)download all attachment from this post and keep all them on one place.
3)open scatter loading
4)select scatter file from attachment
5)it will itself select boot and recovery
6)select download then yes
7)switch off the tab and insert data cable
8)when its done it will automatically stop and a logo with success appear
9)done! open recovery mode by (vol+)+power button
Do it on your own risk
Your warranty is void now
don't forget to hit thanks if found useful
Click to expand...
Click to collapse
Any idea how to loading cmw recovery without install it
For those still interested:
This thread page 3, mentions using MTK droid tools to flash CWM. This after rooting with kingoroot.
RASTAS12 said:
Good day all. I have a Lenovo A3300 (A7-30) tablet. I have downloaded and installed Online Nandroid Backup and have created a backup for restore. I have scoured the net for a custom recovery and have failed to find one.
1.Has anyone come across a custom recovery?
2.Is there any way to flash a nandroid backup without a custom recovery?
3. Is there a generic custom recovery for a MTK8382 device running 4.2.2?
Thanks in advance for your time and help.
Click to expand...
Click to collapse
There are many I can't paste links but I got a CWM and twrp
My tab is now bricked, recovery is there but not booting. How to fix ?
:crying:
Diwakar1990 said:
Hi all i have compiled successfully cwm recovery for our a7-30 lenovo a3300 tablet.
Before starting the process make sure you have installed all required drivers.
for automatic driver installer.
process to flash
1)open sp flash tool(download the latest version)
2)download all attachment from this post and keep all them on one place.
3)open scatter loading
4)select scatter file from attachment
5)it will itself select boot and recovery
6)select download then yes
7)switch off the tab and insert data cable
8)when its done it will automatically stop and a logo with success appear
9)done! open recovery mode by (vol+)+power button
Do it on your own risk
Your warranty is void now
don't forget to hit thanks if found useful
Click to expand...
Click to collapse
yeah...
tnot that recovery the guy gave here.
Go in this thread: http://forum.xda-developers.com/android/development/lenovo-tab-a7-30-a3300-development-t3346048
in this thread, you will find a lot of things for your A7-30 A3300 tablet, for G/GV, W/H/HV and T models.
the TWRP version is 3.0, material design, there, in that thread.
Good luck! Also, it's up to you to thank this post.
Related
I have rooted my xolo q1000 and need help with cwm q1000.
Any one who can suggest how can i go about it.
alok_101 said:
I have rooted my xolo q1000 and need help with cwm q1000.
Any one who can suggest how can i go about it.
Click to expand...
Click to collapse
HY, if your question is how to flash recovery,than is pretty simple.First go to playstore,then find Rom manager,from there you will download CWM.Then reboot into stockk recovery(the one your phone allready has)/choose reinstall package (do it two times),and then reboot into recovery.IMPORTANT, do not erase the CWM file,because every time you flash recovery ,it needs the zip file. PLEASE PRESS THANKS IF I HELPED YOU!!!!
johnyvlad said:
HY, if your question is how to flash recovery,than is pretty simple.First go to playstore,then find Rom manager,from there you will download CWM.Then reboot into stockk recovery(the one your phone allready has)/choose reinstall package (do it two times),and then reboot into recovery.IMPORTANT, do not erase the CWM file,because every time you flash recovery ,it needs the zip file. PLEASE PRESS THANKS IF I HELPED YOU!!!!
Click to expand...
Click to collapse
With this he could brick his device...If the phone doesn't have the recovery available or if it has a locked bootloader he can't do this. Please don't spread disinformation as it could harm other people's devices. And to the OP if you could get a stock recovery.img and if the bootloader is unlocked you could use the cwm builder to get the recovery and then fastboot to flash it.
nerotNS said:
With this he could brick his device...If the phone doesn't have the recovery available or if it has a locked bootloader he can't do this. Please don't spread disinformation as it could harm other people's devices. And to the OP if you could get a stock recovery.img and if the bootloader is unlocked you could use the cwm builder to get the recovery and then fastboot to flash it.
Click to expand...
Click to collapse
Scuse me for trying to help .I just told him what i would do,if i had this problem.Now,he needs to search for this,on the official CWM website.It is not my fault if he destroys the world following my advice,so please if you dont like my quotes stay away and dont say to other people that i "spread disinformation",when i am just tryingto help!.......RESPECT!......
johnyvlad said:
Scuse me for trying to help .I just told him what i would do,if i had this problem.Now,he needs to search for this,on the official CWM website.It is not my fault if he destroys the world following my advice,so please if you dont like my quotes stay away and dont say to other people that i "spread disinformation",when i am just tryingto help!.......RESPECT!......
Click to expand...
Click to collapse
You can't just flash any recovery on any device, doing so could PERMANENTLY DAMAGE it. I've been doing stuff like this for quite some time and I know stuff like this. And yes, he has to search about it. It will take more time but it will take a lot more if he destroys his device. And yes it IS YOUR FAULT if you give him completely wrong instructions and he destroys his phone by following them. So if you are unsure about something or you don't know something then don't post it, since it can only make things bad not help.
Ported CWM to my Q1000,below is the link you can download thefile, there is a procedure to port the CWM in pdf file.
https://www.box.com/s/nob1riy77trl6v97tcy8
@starwire
starwire said:
Ported CWM to my Q1000,below is the link you can download thefile, there is a procedure to port the CWM in pdf file.
https://www.box.com/s/nob1riy77trl6v97tcy8
Click to expand...
Click to collapse
file has been removed..do reupload it..thnx in advance!!
here is the link
https://www.box.com/s/ymebwi7p7s6aegy0cunx
some issues...need help
starwire said:
here is the link
https://www.box.com/s/ymebwi7p7s6aegy0cunx
Click to expand...
Click to collapse
first of all thanks for the link...but do clarify one thing:
I have already installed drivers for my phone through pda net while rooting my phone..do i need to uninstall the drivers of the phone & again install it?
It will be greatly helpful if you mention the exact steps you have followed in your own writing rather than the pdf which you have given as it is not very clear.(no offense)
Your help regarding this will be much appreciated..ty!
If you already rooted your phone, install mobile uncle App from play.
Place the recovery in the root of SD card.
open mobile uncle and search for recovery update.
this app will install the recovery.
hope this helps..
starwire said:
If you already rooted your phone, install mobile uncle App from play.
Place the recovery in the root of SD card.
open mobile uncle and search for recovery update.
this app will install the recovery.
hope this helps..
Click to expand...
Click to collapse
the app did not install the recovery i had tried it
the stock cwm has also removed
blade_boy said:
the app did not install the recovery i had tried it
the stock cwm has also removed
Click to expand...
Click to collapse
You have to flash recovery using spflash tools
I tried many times with other methods but it always fails
flashing will void your warranty though, but you can reflash stock rom and act dumb at the service centre and they will fix your phone for free (done this twice)
Miui, lewa os, stock modified 4.2.1(by m_jani) are the only working non crashing roms I know of, let me know if you need their links
how do i...
but how do i have to boot xolo q1000 opus in org/ cwm recovery??
not working
starwire said:
If you already rooted your phone, install mobile uncle App from play.
Place the recovery in the root of SD card.
open mobile uncle and search for recovery update.
this app will install the recovery.
hope this helps..
Click to expand...
Click to collapse
Not working on my device
I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!
Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery
Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig
Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops
Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
thanks
thanks for help
Hello friends!
Finally I was able to root Alcatel OneTouch Flash 6042D :good:
I've also created TWRP for this device using TWRP Easy Magic Installer. Thanks to all the guys who are involved in creating such an amazing tool. All the credit goes to them.
I've installed this recovery and flashed few zips using it and it works fine. Need to test it more.
Flashing steps:
0. Backup your phone using MTK Droid tools
1. Download the attached recovery.img file
2. Install using SP Flash tool (make sure you are rooted, if you are not rooted- refer this thread for rooting 6042d)
Note:
I or xda will not be responsible for any damage done to your phone.
In case you have any questions/ queries/ doubts post them here :highfive:
hey can you please re-post the thread for rooting the same. My browser won't load that page for some reason. Thanks.
oh yes
Backup For Soft Bricked Phone
. . .Thanks Nitin for the backup.
Also, If anyone wants a TWRP Backup just PM me coz I took one this time.
thinks
Cheese Cracker said:
Could someone send me a TWRP Backup to boot into?..... I forgot to take backup and bricked my phone.
(I have the TWRP , just need a backup to boot into)
Click to expand...
Click to collapse
You can post an update on this post
nitin.chobhe said:
You can post an update on this post
Click to expand...
Click to collapse
You can find the cwm backup and cwm recovery in needrom site. You can flash the cwm recovery via SP flash tools and then the cwm backup through recovery.
pinakini said:
You can find the cwm backup and cwm recovery in needrom site. You can flash the cwm recovery via SP flash tools and then the cwm backup through recovery.
Click to expand...
Click to collapse
I met @Cheese Cracker and handed over him the backup dvd... http://forum.xda-developers.com/showpost.php?p=63003606&postcount=4
After some hesitation I rooted the 6042d. But the device is not detected in mtk droid tools to back it up. It is OK with spflash tools. Any advice please.
pinakini said:
After some hesitation I rooted the 6042d. But the device is not detected in mtk droid tools to back it up. It is OK with spflash tools. Any advice please.
Click to expand...
Click to collapse
You need to press the key combination if I remember it correctly.
Search for it. And I hope you have the drivers installed
Sent from my Nexus 4 using XDA Free mobile app
Inception Auto-Root only for SM-T113 (Galaxy Tab 3 lite new edition). It works pretty much like CF-Auto-Root work. You end up with supersu installed, and it reinstalls stock recovery when done.
DISCLAIMER
==============
DO NOT USE FOR SM-T110
You void your warranty when you flash something to your device
Use at your own risk, I'm not responsible for bricking your device.
Known issues
================
Screen flashes while installing supersu but it's nothing major
XDA:DevDB Information
SM-T113 Inception-Auto-Root , Tool/Utility for the Samsung Galaxy Tab 3
Contributors
tgalal
Source Code: https://github.com/inception-android/inception_base_samsung_goyavewifi
Version Information
Status: Testing
Created 2015-06-07
Last Updated 2015-06-07
Works like a charm on my SM-T113 - Samsung galaxy tab 3 lite 7inch.
Thank you !
How do I use this? Simply flash recovery_twrp.img with Odin?
Edit:
Ok I found your inception tool. I guess I have to use this. But still I don't really get it. Can you give some hints? Thanks a lot for your efforts!
custom rom for sm-t113
Any custom rom for? Cant seem to find one...
Thanks in advance...
.acy said:
How do I use this? Simply flash recovery_twrp.img with Odin?
Edit:
Ok I found your inception tool. I guess I have to use this. But still I don't really get it. Can you give some hints? Thanks a lot for your efforts!
Click to expand...
Click to collapse
You just need to flash the file called "inception-samsung-goyavewifi-autoroot.tar.md5" using odin. The inception tool was only used to generate this file, but you don't need to use inception for flashing. More about inception in this thread.
david.com said:
Any custom rom for? Cant seem to find one...
Thanks in advance...
Click to expand...
Click to collapse
None that I know of :/
Hello! where it's the "inception-samsung-goyavewifi-autoroot.tar.md5" file?
i don't see... where it's the link, please?
thanks!!!
jozemanue said:
Hello! where it's the "inception-samsung-goyavewifi-autoroot.tar.md5" file?
i don't see... where it's the link, please?
thanks!!!
Click to expand...
Click to collapse
If you go to the Downloads, download inception-samsung-goyavewifi-autoroot-SM-t113.zip , extract it and then you'll see inception-samsung-goyavewifi-autoroot.tar.md5
I have other question,
i need the custom recovery (or CMW or TWRP) i need "clone" a tablets with the same configuration. (50 tablets aprox.....)
it's possible create a md5 file for flash in odin wiht a custom recovery for create backups ?
thanks. (sorry for my english.... jejejeje)
jozemanue said:
I have other question,
i need the custom recovery (or CMW or TWRP) i need "clone" a tablets with the same configuration. (50 tablets aprox.....)
it's possible create a md5 file for flash in odin wiht a custom recovery for create backups ?
thanks. (sorry for my english.... jejejeje)
Click to expand...
Click to collapse
check out inception
ufffff very difficult for my, thanks for all!
please tgalal, are you possible create a md5 file with the recovery TWRP , please???? i don't understand the process... it's very hard to me....
i need prepare in the next week a 25 tablets SM-T113 in me work.... it's very easy with a custom recovery - backup....
thanks!
Great work, thank you. Have you tried flashing a custom recovery like TWRP yet?
kocag said:
Great work, thank you. Have you tried flashing a custom recovery like TWRP yet?
Click to expand...
Click to collapse
Hello, in here "https://github.com/inception-android/inception_base_samsung_goyavewifi"
in the folder img, have a recovery stock and twrp image, I am flash in the tablet, but, don't enter in the recovery appears a black image....
ODIN does not recognize my SMT113 - no com port recognized on ODIN
Any suggestions?
TAB3 recognized by my PC as a PTP connection
thanks
zolom said:
ODIN does not recognize my SMT113 - no com port recognized on ODIN
Any suggestions?
TAB3 recognized by my PC as a PTP connection
thanks
Click to expand...
Click to collapse
Hello, are you enter in "download Mode"?
it's power on the tablet with the "power + central button + down volumen"
in the first screen of download mode push the up volumen. ok, it's ready
now, connect the tablet in the computer with odin opened.
regards
I am on downloaded mode. Still Odin does not recognize the com port.
I will try another computer
Success at last . t113 is rooted. Now looking for recovery, which one do you rcommend?
Thanks
Can I flash the recovery_twrp.img via flashify?
Thanks
possible used in SM-T113NU? recovery in the near future?
tgalal said:
You just need to flash the file called "inception-samsung-goyavewifi-autoroot.tar.md5" using odin. The inception tool was only used to generate this file, but you don't need to use inception for flashing. More about inception in this thread.
None that I know of :/
Click to expand...
Click to collapse
thanks for your reply:good:
hello,
Acer iconia a1-830, I'm trying to flash a stock firmware SDs_Acer_AV0K0_A1-830_1.007.00_WW_GEN1.zip
i saw this file for a1-830 acer, it says like this
Firmwares
Flashable via (stock) Recovery
A1-830
SDs_Acer_AV0K0_A1-830_1.007.00_WW_GEN1.zip
SDs Acer_AV0K0_A1-830_RV01RC02_WW_GEN1.zip
SDs_Acer_AV0K0_A1-830_RV01RC05_WW_GEN1.zip
So i downloaded SDs_Acer_AV0K0_A1-830_1.007.00_WW_GEN1.zip,
i assume it's flashable via android system recovery, so copied the file to my microsd card and boot to recovery then only option i know to flash it by "apply update from external storage" then select the file.
it gives me this error installation aborted.. it is trying to find update package.
tried changing file name to update.zip still the same error. i know i'm doing it wrong.
anyone knows how to flash this files to my acer iconia a1-830?
thanks in advance.:laugh:
Then i think the file is corrupted.Try flashing through cwm or twrp recovery
IamAlexD said:
Then i think the file is corrupted.Try flashing through cwm or twrp recovery
Click to expand...
Click to collapse
Thanks for the reply..
BTW, the reason why i'm flashing stock firmware is because i'm stuck in a bootloop... and hard reset not able to fix it..
i'm still researching on cwm or twrp recovery.
darkfilth101 said:
Thanks for the reply..
BTW, the reason why i'm flashing stock firmware is because i'm stuck in a bootloop... and hard reset not able to fix it..
i'm still researching on cwm or twrp recovery.
Click to expand...
Click to collapse
Have you tried TWRP or CWM? If you are searching for TWRP or CWM for acer iconia then http://www.cwm-twrp-recovery.co/2015/08/acer-iconia-a1-830-5930.html
has the both recovery files (the guy rewrite the post from Xda, i cant find the original article to share)and there are few comments on that post.I haven't try because i dont have the device.You may try the guide and replay me if it works thanks.
IamAlexD said:
Have you tried TWRP or CWM? If you are searching for TWRP or CWM for acer iconia then http://www.cwm-twrp-recovery.co/2015/08/acer-iconia-a1-830-5930.html
has the both recovery files (the guy rewrite the post from Xda, i cant find the original article to share)and there are few comments on that post.I haven't try because i dont have the device.You may try the guide and replay me if it works thanks.
Click to expand...
Click to collapse
Thanks for the reply, I already solved it. able to flash it using SDK tools.:good:
darkfilth101 said:
Thanks for the reply, I already solved it. able to flash it using SDK tools.:good:
Click to expand...
Click to collapse
Good to hear.:good:
IamAlexD said:
Have you tried TWRP or CWM? If you are searching for TWRP or CWM for acer iconia then
has the both recovery files (the guy rewrite the post from Xda, i cant find the original article to share)and there are few comments on that post.I haven't try because i dont have the device.You may try the guide and replay me if it works thanks.
Click to expand...
Click to collapse
That site is a joke. I tried to download Lollipop for my a1 830 and the file turned out to be CENTos. It installed fasterweb spyware on my machine after going through the survey process.
I am also stuck in a bootloop. If you know how to solve this please reply. I cant find a working recovery file but I will give you a headsup on what worked when it works
darkfilth101 said:
Thanks for the reply, I already solved it. able to flash it using SDK tools.:good:
Click to expand...
Click to collapse
can you tell me how? Im also stuck in a bootloop and I am just about to flash the update. If it fails I want to know how to solve it. I have sdk manager, what else do I need?
Acer Iconia A1-830
RAZERZDAHACKER said:
can you tell me how? Im also stuck in a bootloop and I am just about to flash the update. If it fails I want to know how to solve it. I have sdk manager, what else do I need?
Acer Iconia A1-830
Click to expand...
Click to collapse
FIXED! I RESTORED TO JELLYBEAN AND IT REMOVED ROOT ACCES AND MADE WARRANTY RESTORED SO TOOK IT DOWN TO SHOP, GOT A NEW ONE AND ROOTED IT USING THIS TOOL. USED ZIPME FOR COMPLETE BACKUP AND I WILL POST A RECOVERY FOR KITKAT USERS
darkfilth101 said:
hello,
Acer iconia a1-830, I'm trying to flash a stock firmware SDs_Acer_AV0K0_A1-830_1.007.00_WW_GEN1.zip
i saw this file for a1-830 acer, it says like this
Firmwares
Flashable via (stock) Recovery
A1-830
SDs_Acer_AV0K0_A1-830_1.007.00_WW_GEN1.zip
SDs Acer_AV0K0_A1-830_RV01RC02_WW_GEN1.zip
SDs_Acer_AV0K0_A1-830_RV01RC05_WW_GEN1.zip
So i downloaded SDs_Acer_AV0K0_A1-830_1.007.00_WW_GEN1.zip,
i assume it's flashable via android system recovery, so copied the file to my microsd card and boot to recovery then only option i know to flash it by "apply update from external storage" then select the file.
it gives me this error installation aborted.. it is trying to find update package.
tried changing file name to update.zip still the same error. i know i'm doing it wrong.
anyone knows how to flash this files to my acer iconia a1-830?
thanks in advance.:laugh:
Click to expand...
Click to collapse
Install driver first just connect phone to pc or use adb installer for driver installation.
Then unplug it if driver installed properly.
Extract/Open SP_Flash_Tool_v3.1252
Click "Scatter-loading"then browse "MT6575_Android_scatter_emmc"inside the Firmware.
Hit Download button.
Hold volume down then connect to PC and wait until flashing is done.
See more at Acer A1-830 Manual- guideusermanual.com/product-name-a1-830-manual&po=568483&lang=English