Hi
I got a sound problem with my new ASUS P535, in which the phone is all the time thinking that i'm using the headset even when its unplugged, so no sound can be heard even the headset is unplugged only when somebody calls there is the ring tone, but nor the mike or the phone speaker are working
Any ideas?!?
P.S. I'm using WM6, & I already tried to flash it many times for no results!
Bash
Hi,
I had the same problem with my p535, but I found the way to fix it. The problem is that the micro switch was jammed in the headset-port, so to fix the problem; you should just hit hardly the bottom of the PDA onto a table or other hard surface. There is no problem with the software.
Regards,
Sagramor de Zyn
I have tried this solution but it didn't work.
Are you sure this is the only way to fix this problem.
Also when i use the device with the headset, the sound of the MP3's are like you listen something under water. And during a call, the opponent's voice sounds so deep, i can hardly hear it.
Than you have a bit bigger problem, the hole port is ****ed, maybe one of the connection is broken or the hole port is moved from where it should be. It just happening with mp3 or with phone as well? if the phone is not working as well with the headset, than you have to bring to service, 'couse the port is broken, if just the mp3 not workin' than I don't have a clue.
Sagramor de Zyn said:
Hi,
I had the same problem with my p535, but I found the way to fix it. The problem is that the micro switch was jammed in the headset-port, so to fix the problem; you should just hit hardly the bottom of the PDA onto a table or other hard surface. There is no problem with the software.
Regards,
Sagramor de Zyn
Click to expand...
Click to collapse
It worked for me! Thanks a lot!
I thought my PDA speaker was crapped someway..
Anyway, I did not hit it, just plugging in and out the mini jack connector several times within a short time.
Regards,
Xel
Sagramor de Zyn said:
Hi,
I had the same problem with my p535, but I found the way to fix it. The problem is that the micro switch was jammed in the headset-port, so to fix the problem; you should just hit hardly the bottom of the PDA onto a table or other hard surface. There is no problem with the software.
Regards,
Sagramor de Zyn
Click to expand...
Click to collapse
It worked for me as well Thanks a lot!!!!!!
Bobek
Sound problem again (mini jack connector replacement)
Hello again!
My P535 made a long way since the prevoius sound problem.
My device's mini jack connector has been damaged, and I wish to replace it with a new one.
Could anyone help me how to replace the mini jack connector? Unfortunatelly the oroginal connector was so badly damaged that it cannot be used anymore.
My device cannot play sound and cannot record any voice, but the speaker and microphone is fully intact though. I have to repair it but I don't know what type of mini jack connector I need. I heared that if I use some incompatible connector that could damage the device for good.
I'd also find out that two wire must contact to allow the internal speaker and mike to function, for now, the device "thinks" a jack cable is plugged.
Sorry for my bad english..
Could anyone help?
Regards,
Xel
well, I have a bluetooth ad2p stereo headset (platrinocs), but the akkumulator got busted so I'm in a hurry to repair my phone's analog mini jack output, that will will solve the speaker and mike problem too.
/hovewer, the wireless bluetooth headsets has a serious disadvantage
It cannot connect automaticly to the bluetooth headset when a phone call is incoming, or when you enter proximity whith the headset or with the device (if you left either on desk). i've tried patches and apps to make autoconnect available, but no luck.. analog output is much more advance then bluetooth high quality audio for one reason the hardware eq and software mixers/
the main problem, is that the old mini jack output is damaged to dust, i cannot recognize it which type to replace. googling the specs of the device did not helped me identifying the mini jack connector. I've learned that there are many types, some of them are used to headset functions different at model types, even differs at manufacturers.
Please, anyone could help I would greatly appriciate it!
bye,
Xel
Contana said:
I have tried this solution but it didn't work.Are you sure this is the only way to fix this problem.
Click to expand...
Click to collapse
check mini jack output, plug in and move a bit carefully the mini jack cable in output.
probably some air duster or contact spray could help too.
bye,
Xel
thnx a lot... u r great! it works! u r my hero...
Hi all.
Quick question. Topic kind of says all. But, every other bluetooth phone I've had has worked great with my bluetooth handsfree that came installed in my car (Ford Mondeo 2006 and earlier modem). Last phone I had was an Orange San Fran, and that worked great with android 2.1. Also, with the HTC Touch Pro 2, that worked great too. I know that's a WM phone, not android, but would imagine HTC wouldn't mess up something that bad?!
Anyway, with the z, I can connect perfect to the headset. It works in that when I call, radio/cd volume turns off, but the sound comes through the headset, not the speakers... all other phones work fine with volume through car headset speakers. Also, tried doing a test call to see whether the microphone is taken through the car microphone, or the handset microphone, and appears to be handset microphone. When I put the phone to my mouth to talk, it's much clearer and loader than if I put it down and speak in the car mic. So sounds like nothing is actually transferring to the bluetooth in the car...
Is there anything I cam do to ensure it's working perfecly.
Anyone else have any input of what I can do to get it to work?
Thanks alot
Sent by my phone
This is a strange problem i am facing
it started unexpectedly
the problem over here is that my phone is not able to recognize between earphones and speaker after connecting earphones
dont know whats the problem over here is
the earphones would work at first and then all of a sudden it stops to recognize it
this happened with two of my earphones (no earphone problem cause they work with other phones
is anybody else experiencing this problems?
after trying to figure out what is happening i opened up audio fx to see if its creating problems and this is what i saw
as u can see in the video above the phone is not connected to any earpiece
at 0.02 i connect the earphones and for just a second it recognizes the earphone and then keeps switching between headset and speaker mode
then the video contains various attempts of connecting earphones and getting the same result
Heres a logcat https://drive.google.com/open?id=0B--cxicb-CQGS2J1blVmUnVkNGM&authuser=0
(sorry cannot paste to pastebin ,since it exceeds max size limit)
Device:-XT1033
ROM:-AICP (happened with diff roms in the past too)
kernel:-hurtsky(again happened with another diff kernel in the past)
@matmutant
sorry to tag u here
i can think of nobody else when it comes to hardware probs
since u have knowledge about it
Soul reaper said:
@matmutant
sorry to tag u here
i can think of nobody else when it comes to hardware probs
since u have knowledge about it
Click to expand...
Click to collapse
hmmm, ok,
Are they "simple" earphones ==> ones that doesn't have any call/music/volume triggers
Did you tried with the AUX-IN of a HiFi installation (with a jack-audio cable plugged to the AUX-IN of it)
Did you tried Apple vs non-apple earphones (the ground and microphones rings on the jack are usually reversed)
What i know about jack port is only that impedance is important for phones : that's the way the earphones are detected and how the triggers work when there are some.
At first read i have no idea about your problem, but it might be a dirty port OR an issue with the controller
You may read the following, and try to play with it:
https://source.android.com/accessories/headset-spec.html
matmutant said:
hmmm, ok,
Are they "simple" earphones ==> ones that doesn't have any call/music/volume triggers
Did you tried with the AUX-IN of a HiFi installation (with a jack-audio cable plugged to the AUX-IN of it)
Did you tried Apple vs non-apple earphones (the ground and microphones rings on the jack are usually reversed)
What i know about jack port is only that impedance is important for phones : that's the way the earphones are detected and how the triggers work when there are some.
At first read i have no idea about your problem, but it might be a dirty port OR an issue with the controller
You may read the following, and try to play with it:
https://source.android.com/accessories/headset-spec.html
Click to expand...
Click to collapse
1>No they are not simple earphones
2>no never tried using AUX-IN on moto g
3>No,no apple earphones were connected to it
the earphones that i used here was from samsung and karbonn(a local brand,that is)
these two earphones used to work with my phone but all of a sudden it stopped!!
inserting them sometimes gives a repeated sound of distortion(cant explain that ....but theres some noise)
Im having the same problem! It's definitely a phone issue... Thing is, I used it with my hudl brand aux cable and that works just fine with the phone but my headphones won't? (I don't know if this inf helps or hinders but I figured it might be important)
A_Strange_Dwarf said:
Im having the same problem! It's definitely a phone issue... Thing is, I used it with my hudl brand aux cable and that works just fine with the phone but my headphones won't? (I don't know if this inf helps or hinders but I figured it might be important)
Click to expand...
Click to collapse
So apparently it works better with two-ring headphones, ones that don't have any play/pause buttons or microphones built in? Turns out my headphones have 3 rings on the jack. So apparently, i just have to buy a whole new pair of headphones that only have 2 rings but I don't see why I should spend anymore money just because Motorola ****ed up?
Hey all,
The headset that came with my phone (Sony MH750) is not detected by my phone at all. However, the phone detects other headsets just fine, and the MH750 works well with my iPhone.
Any ideas as to what may be causing this problem?
Hello All,
M-Horse N900W smart phone.
Phone was dropped on thin carpet/concrete. Now the internal speaker no longer works. Ear speaker for phone works via phone app though.
If an earbud set is plugged in the phone gets sound also.
I have been through all the software speaker cleaners/testers etc.
Anyone have any insight on what I could use as an replacement speaker.I thought for sure there would be some posts on this subject but nothing relevant to my case.
This phone for being a cheapy has worked great.
The plugging in an earpiece is simply not practical for my uses. Also dont want to use and bluetooth setup either.
Thank You,
Barry