Z3 charging - Xperia Z3 Q&A, Help & Troubleshooting

Are there any people here using a different charger in order to charge the Z3 a little quicker? As it is, it takes forever to fully charge the battery, especially during the last 5%. I want to try the turbo charger from Motorola but I'm concerned of ruining my battery.
Sent from my Nexus 6

ROne21 said:
Are there any people here using a different charger in order to charge the Z3 a little quicker? As it is, it takes forever to fully charge the battery, especially during the last 5%. I want to try the turbo charger from Motorola but I'm concerned of ruining my battery.
Sent from my Nexus 6
Click to expand...
Click to collapse
The stock charger is pretty fast for me already. What is ur charger's amperage?
Sent from my D6653 using XDA Free mobile app

I use the 2.0A charger that came with my Tab S. It charges reasonably fast. However, if you use the magnetic charging cable, it'll charge the phone faster.

I bought the motorola quick charger. I definitely don't plan on using it all the time. It'll be a travel charger where I might need to add some charge in a pinch.
There's a thread documentind the rate at which different charging methods charge at. I put my Turbo Charger results at the bottom.
http://forum.xda-developers.com/z3/general/xperia-z3-battery-life-recharge-t2916773

Related

Moto G wall charger

I have ordered a Moto G from England (GSM global version I presume), and while I am waiting for it to arrive, I would like your advice on what kind of wall charger to buy that would be optimal for the phone charge recommendations since my knowledge on the issue is very minimal.
I read somewhere that Motorola recommends between 0.5 - 1.5A , but that doesn't really tell me anything.
I have an old Samsing galaxy SII. Can I use the charger of the Galaxy for the Moto G? The output is 0.7A
As you said, any charger where the output is not too high (I recommend below 2a or below 2,5 to not stress the battery.
Conclusion: your samsung charger should work perfectly!
Edit: if you experience bad/not so good battery life (I did after update to kitkat), let your phone drain completely (shuts down) and recharge it to 100% and leave plugged in like 30-1h after it reached 100%.
But don't do this too often as it will harm your battery over time.
creambyemute said:
As you said, any charger where the output is not too high (I recommend below 2a or below 2,5 to not stress the battery.
Conclusion: your samsung charger should work perfectly!
Edit: if you experience bad/not so good battery life (I did after update to kitkat), let your phone drain completely (shuts down) and recharge it to 100% and leave plugged in like 30-1h after it reached 100%.
But don't do this too often as it will harm your battery over time.
Click to expand...
Click to collapse
Thanks. With 0.7 output would the charge be slow or fast?
creambyemute said:
As you said, any charger where the output is not too high (I recommend below 2a or below 2,5 to not stress the battery.
Conclusion: your samsung charger should work perfectly!
Edit: if you experience bad/not so good battery life (I did after update to kitkat), let your phone drain completely (shuts down) and recharge it to 100% and leave plugged in like 30-1h after it reached 100%.
But don't do this too often as it will harm your battery over time.
Click to expand...
Click to collapse
Using a charger over 2A doesn't stress the battery because the Moto G limits the current to 1.5A.
It says so right here : https://motorola-global-portal.cus...prod_answer_detail/a_id/97318/p/30,6720,9050
”Any Motorola charger with the correct micro-USB tip will charge your Moto*G. You will see the best results when the output of the charger is between 500 mA and 1.5 A. The higher the output, the faster your Moto G*will charge.
If your charger output is higher, the MOTO G will automatically restrict the charging rate. If your charger is lower, it will simply take longer to reach a full charge.”
I use my nexus 7 2A charger daily and it charges noticeably faster than my 1A HTC charger and is as Motorola stated, perfectly safe.
A 0.7A charger would charge pretty slow!
Sent from my Moto G using Tapatalk
Just under 3hrs for a 0% to 100% charge with a .75 A charger for me.
Sent from my XT1032 using XDA Premium 4 mobile app
Im using a HTC charger i already had which is rated at 1a ,seems to be working fine.
my 0.5A from 20% to 100% ~3 hours. When charging from less than 20%, I often put my phone to aeroplane mode and get ~3 hours of charging too
Sent from my XT1032
mdentener said:
Using a charger over 2A doesn't stress the battery because the Moto G limits the current to 1.5A.
It says so right here : https://motorola-global-portal.cus...prod_answer_detail/a_id/97318/p/30,6720,9050
”Any Motorola charger with the correct micro-USB tip will charge your Moto*G. You will see the best results when the output of the charger is between 500 mA and 1.5 A. The higher the output, the faster your Moto G*will charge.
If your charger output is higher, the MOTO G will automatically restrict the charging rate. If your charger is lower, it will simply take longer to reach a full charge.”
I use my nexus 7 2A charger daily and it charges noticeably faster than my 1A HTC charger and is as Motorola stated, perfectly safe.
A 0.7A charger would charge pretty slow!
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Many thanks. Could you recommend me on a good and not expensive charger that would do the job and charge it fast?
Since I dont live in the US, amazon is kind of useless to me since there are very few items they ship outside the US, so eBay would be a better option. I just dont want to buy something crappy
mazinya said:
Many thanks. Could you recommend me on a good and not expensive charger that would do the job and charge it fast?
Since I dont live in the US, amazon is kind of useless to me since there are very few items they ship outside the US, so eBay would be a better option. I just dont want to buy something crappy
Click to expand...
Click to collapse
I use a Blackberry branded 0.75mah micro usb charger which works well as does my Samsung Galaxy Tab2 which is 2amp charges nicely too.
I found an older HTC usb 0.7 charger did not work at all well for some reason.
charger doesn't push power, phone draws power, as long as you have the right voltage you are good
Pinktank said:
charger doesn't push power, phone draws power, as long as you have the right voltage you are good
Click to expand...
Click to collapse
Indeed but I've found some chargers vary for example my Samsung 2amp Galaxy Tab2 charger will not charge my Moto Defy+ phone, it sits there forever doing very little but the Moto G is fine with it. Probably due to the Defy+ only drawing 500mah and the Galaxy charger sees this as undercurrent and doesn't output whereas the MotoG can demand up to 1500mAh current which the Galaxy charger sees as acceptable and supplies the current.
I'd avoid any of the super cheap nasty Chinese crap chargers that seem very poorly built, unstable and potentially a death trap.
spannerz said:
Indeed but I've found some chargers vary for example my Samsung 2amp Galaxy Tab2 charger will not charge my Moto Defy+ phone, it sits there forever doing very little but the Moto G is fine with it. Probably due to the Defy+ only drawing 500mah and the Galaxy charger sees this as undercurrent and doesn't output whereas the MotoG can demand up to 1500mAh current which the Galaxy charger sees as acceptable and supplies the current.
I'd avoid any of the super cheap nasty Chinese crap chargers that seem very poorly built, unstable and potentially a death trap.
Click to expand...
Click to collapse
Sorry I meant to quote the advice above that said don't get something with too large a current.
Absolutely avoid cheap chargers, burnt home totally not worth the savings. The hp chargers left from the time they used to make tablets are pretty good actually, tested with an oscilloscope
I dont want a crappy cheap Chinese charger. Thats why I am asking for a recommendation. I have a nexus 7 2013 and the output is 2A. I assume I can use it also to charge the Moto G?
mazinya said:
I dont want a crappy cheap Chinese charger. Thats why I am asking for a recommendation. I have a nexus 7 2013 and the output is 2A. I assume I can use it also to charge the Moto G?
Click to expand...
Click to collapse
That should be fine
That's funny hey, the Australian version comes with USB cable wall charger and Motorola headset. This is the XT1033 variant.
Sent from my XT1033 using Tapatalk
mdentener said:
I use my nexus 7 2A charger daily and it charges noticeably faster than my 1A HTC charger and is as Motorola stated, perfectly safe.
Click to expand...
Click to collapse
I'm curious, is your 2A charger for a 2012 Nexus 7? Because I also plan to use my 2012 Nexus 7 charger on my Moto G, which is coming next week. How quickly does it charge the Moto G?
consolegam3r said:
I'm curious, is your 2A charger for a 2012 Nexus 7? Because I also plan to use my 2012 Nexus 7 charger on my Moto G, which is coming next week. How quickly does it charge the Moto G?
Click to expand...
Click to collapse
Yeah my nexus 7 is a 2012 model also, works just fine and charges really fast. I'll stopwatch my next recharge and report.
Edit: It charges from 10% to 100% in 2 hours with my nexus 7 2012 2A charger while incidentally using it.
Next charge I'll try my HTC 1A charger to monitor the difference
Sent from my Moto G using Tapatalk
2 hours 10 minutes from 0% to 100% with 1A charger
mdentener said:
It charges from 10% to 100% in 2 hours with my nexus 7 2012 2A charger while incidentally using it.
Next charge I'll try my HTC 1A charger to monitor the difference
Click to expand...
Click to collapse
Great, thanks for finding out!
I have a charger from Htc Explorer with this specification Input: 100-240v~200mA 50/60hz / Output: 5V-1A , and don't seems to work very well, is normal???
Thanks in advance

Anyone try using a HTC charger for a Faster charge..

Hey people, I just try my oem HTC m8 charger on my t-mobile Sony z3 via magnetic charging port and I swear it charging my phone at least double or three the rate then if I use the Sony oem it came with..
I also left it on stamina mode while charging the port..
Has anyone else try this?
Sent from my D6616 using XDA Free mobile app
Isn't the charger on the M8 1.5amps? The same as the charger on the Z3.
I have both, so I suppose I could use the M8 charger tonight and see...
You are probably right on the spec but I just don't know if it's a placebo effect but I figured I ask.. Also if I am right this would make this Phone so much sweeter than it already is..
I know it's supposed to charger faster by using the magnetic port but it seems faster using my HTC m8 charger instead of my Sony oem..
I figured I share see what you guys said
Sent from my D6616 using XDA Free mobile app
xxquicksh0txx said:
Isn't the charger on the M8 1.5amps? The same as the charger on the Z3.
I have both, so I suppose I could use the M8 charger tonight and see...
Click to expand...
Click to collapse
Please let us know how this goes, if it is true, I will probably end up ordering the M8 charger tonight.
i got a 2.1amp samsung tab 8.4 charger with original cable, and it seems the speed of Charging goes faster than stock charger, however i woke up twice wont my battery stuck at 99% charge and it never went to 100 so stopped using it
I've got an Anker dual port charger that has a 2.0amp and 1.5 amp ports on it that I use at work.
Although, the only time I ever charge my phone is at night... And considering charging a battery slower is generally better, I wouldn't be switching to a faster charger for my uses.
Unless I was in a hurry and *needed* the extra 15% a 'quick' charger would give me.
raviboy100 said:
i got a 2.1amp samsung tab 8.4 charger with original cable, and it seems the speed of Charging goes faster than stock charger, however i woke up twice wont my battery stuck at 99% charge and it never went to 100 so stopped using it
Click to expand...
Click to collapse
Samsung tablet chargers are interesting. They will actually increase voltage slightly as current draw increases to compensate for cable losses.
End result is Samsung tablet chargers often charge faster than others, sometimes significantly faster.

Do you keep the battery mod on all the time?

I'm thinking out of picking up the Incipio battery mod. I normally plug in with about 30% left but after my research on prolonging battery life, I'm realizing the battery mod might actually extend the life of the Z Force battery.
Any ways, the point/question is: do you leave the mod always attached and charge it at night (or when you need to)? Or do you only attach the mod when your battery hits a certain percentage?
So far I only lose about 20% during a day. I know that's not much but I'm connected to a 4g network extender so I don't search for a signal.
To answer your question the first day I had the battery mod I set it in efficiency mode and just slapped it on. That sets the mod battery to kick in when the phi e battery hits 80%. It worked like a charm. At the end of the day my mod was at 70%.
I only used it the first day and since then it's just been sitting there charged. But I try to not let my battery fall below 70-80%.
Sent from my XT1254 using XDA Free mobile app
I leave my tumi battery mod connected all of the time.
Sent from my XT1650 using Tapatalk
Hopefully you will find my experience with the TUMI Wireless charging mod relevant, as I don't have experience with the incipio. I leave the TUMI on at all times. When I plug in before bed the TUMI stays attached and charges along with the phone. When I unplug and both the mod and phone are at 100%, the phone discharges until 80% when the TUMI kicks in automatically and keeps the phone charged at 80% until the TUMI hits 0% at which point the phone begins discharging from 80%. I've had this for a couple weeks now and my phone's battery level now occupies 0% of my thoughts throughout the day. It's like being back to the days of the flip phones that ran for 2 or 3 days before needing a charge (... at least that's a safe assumption, as I have no reason to not plug in before bed thus I've never tried to see how many days I can get). I leave every possible background process on, I have 4 or 5 widgets, wifi, Bluetooth, mobile data, high accuracy location mode, Nfc... all those are left on 100% of the time.
The one thing I will say is that the battery mod does add significant weight... but not size (I actually find it easier to hold with the mod attached). For me the extra weight is, comparatively, a very small price to pay for the above benefits.
Sent from my XT1650 using Tapatalk
For the record, the Tumi, Kate Spade, and Incipio should all behave identically...as they are all made by Incipio...the only differences between the 3 are looks...and price
Sent from my XT1650 using Tapatalk
edneum2 said:
Hopefully you will find my experience with the TUMI Wireless charging mod relevant, as I don't have experience with the incipio. I leave the TUMI on at all times. When I plug in before bed the TUMI stays attached and charges along with the phone. When I unplug and both the mod and phone are at 100%, the phone discharges until 80% when the TUMI kicks in automatically and keeps the phone charged at 80% until the TUMI hits 0% at which point the phone begins discharging from 80%. I've had this for a couple weeks now and my phone's battery level now occupies 0% of my thoughts throughout the day. It's like being back to the days of the flip phones that ran for 2 or 3 days before needing a charge (... at least that's a safe assumption, as I have no reason to not plug in before bed thus I've never tried to see how many days I can get). I leave every possible background process on, I have 4 or 5 widgets, wifi, Bluetooth, mobile data, high accuracy location mode, Nfc... all those are left on 100% of the time.
The one thing I will say is that the battery mod does add significant weight... but not size (I actually find it easier to hold with the mod attached). For me the extra weight is, comparatively, a very small price to pay for the above benefits.
Sent from my XT1650 using Tapatalk
Click to expand...
Click to collapse
This.
I want to be able to use my phone as it was meant to be used without thinking about battery life later in the day.
Note that only the non-wireless model charges the mod through the phone when the phone is plugged in via wire...
The wireless charging capable Tumi mod only charges via wireless. It will NOT charge through the phone.
Obviously when wireless charging it will charge both the mod and phone. When wired charging it only does the phone and not the mod.
However the non-wireless one does charge the mod when charging via wire (I tested it).
Sent from my XT1650 using Tapatalk
JasonJoel said:
Note that only the non-wireless model charges the mod through the phone when the phone is plugged in via wire...
Click to expand...
Click to collapse
Wow seriously? So if I got the Incipio with wireless charging from Best Buy, I wont be able to charge it without buying a wireless charging pad?
HotShotAzn said:
Wow seriously? So if I got the Incipio with wireless charging from Best Buy, I wont be able to charge it without buying a wireless charging pad?
Click to expand...
Click to collapse
Not true, I have the Tumi wireless mod: wired & wireless both charge mod & phone.
I have two of both models of Tumi in front of me, and I am 100% sure neither of the wireless models will charge through the phone when it is connected via USB. Not sure why yours is different...
To be clear both of the non-wireless models I have DO charge through the phone when connected via USB...
Sent from my XT1650 using Tapatalk
I have the incipio wireless charging battery pack, can confirm it does charge when the phone is connected with usb.
I wonder if it matters if the mod is in 'efficiency mode' or not... I didn't think so from previous testing, but I'll check that tomorrow.
Edit: I have been using another usb-c cable/charger, not the 'turbo 30' one that came with the phone... That may be the difference. I'll test tomorrow.
Sent from my XT1650 using Tapatalk
So I'll have to apologize. I charged one of the phones with the usb charger that came with the phone, and it DID charge both the phone and mod.
So I must have something else going on with my setup at work, as it definitely does NOT there (even after being plugged in for hours) ...
Sorry for the confusion, and misinformation!
Sent from my XT1650 using Tapatalk
It's been noted that the mods don't charge through the phone on anything but the stock charger or anything that puts out more than 3A @ 5V. That's the minimum requirement for engaging "turbo charging".
I bought my wife the Kate Spade battery pack and it officially died as a result of using a Droid Turbo 1 charger for her nightly charge. The first week or two, it charged just fine throughout the night. Now, however, it won't charge, even on the stock charger (although it will sometimes glitch out and say there is a 97% charge while still not supplying juice to the phone).
I have the Tumi with wireless charging, and I definitely prefer being able to charge it without the phone attached. As for my wife's, Big Red said that they offer a 1 year warranty on accessories, so I'll be able to take the dead one in for an exchange.
Word to the wise: use the stock charger whenever charging your phone with a non-wireless charging model of the battery packs attached. Wireless charging seems to work just fine, every night.
Sent from my XT1650 using Tapatalk
Ace2cool said:
It's been noted that the mods don't charge through the phone on anything but the stock charger or anything that puts out more than 3A @ 5V. That's the minimum requirement for engaging "turbo charging".
Click to expand...
Click to collapse
Actually I get my battery mod to charge using the Verizon branded usb c fast charger. I made sure it worked in a store before I bought it. It does pop up saying turbo charging also. It is not as fast as the Motorola charger. I use Ampere to test them. The Verizon charger is about 2200 and the Motorola one is about 5700. But that and the supplied charger are the only ones that will work to charge the mod. I got screen shots somewhere. I'll try to post them.
Sent from my XT1254 using XDA Free mobile app
The screen shot with the white background shows the supplied Motorola charger.
The screen shot with the white background is the Verizon branded USB C fast charger.
Hope this helps. I've tried using about 15 different chargers and these were the only 2 that would charge the battery mod. That's not to say there's not other ones out there that will do it. Just sharing what I've found.
Sent from my XT1650 using XDA Free mobile app
I had the Tumi wireless battery mod. Changed it to the Incipio wireless battery mod. heres what I have found. Both will charge wireless. They will not however charge using any chargers, while connected to phone, without using the supplied charger or the verizon branded usb c fast charger. Both just sit there with any other charger saying waiting to charge.
I spent more time than ill admit to speaking to verizon tech support, motorola tech support, tumi tech support and incipio tech support verifying this.
Yes any charger will charge the phone. but it needed to turbo charge to be able to switch to charging the battery mod. Ive tried about 10 different chargers to test this. QC 2.0 chargers from the turbo chargers wont charge the battery mods.
I use a generic QC 2.0 charger at home, work, and in the car. All three charge the Tumi mod and the phone. Also use a wireless charger plugged into my computer which charges both. I don't think I've even unwrapped the charger that came with the phone.
It is strange how some chargers work and some don't. I have 5 usb-c chargers, 2 work and 3 don't.
Sent from my XT1650 using Tapatalk

charging using regular charger

Just wondering if charging the phone using regular charger instead of using the fast charger that the phone ones with will mess up the battery?
For example when in my car, Can I use the car charger to charge the phone?
not really, but for sure will a bit slower than the fast charger(actually not a big big different, becoz I'm using the charger from my previous Note 7), and for the fast charger need to go together with the original cable which can go to 5A, now mostly we can buy is support 3A max only.
I've got a normal charger from an old Asus tablet next to my bed I don't see the point in fast charging it overnight I have an idea in the back of my head that it might last a bit longer if I'm not charging it at supercharged speeds every night. In fact I plan to only use the supercharger as a top up only when I need it and in a more convenient place than next to my bed. I've tried 3 different charges now I know I'll charge no problems, albeit much slower
Sent from my MHA-L29 using Tapatalk

Huawei Fast Charger is slow as heck

I have imported my Huawei and I absolutely love the phone. Since it is an import it came with a UK Type fast charger. I simply used a wall adapter and powered it over the US current. Well, that fast charger isn't working what so ever - after 2 hours I only go to about 35 percent from 0. I have used my Note 7 charger to charge it, and there the charging times are much faster. Any ideas on what, if anything, I am doing wrong and maybe where I can buy a working Huawei charger. I can't return the charger since I bought the phone over Amazon and it strictly came with no warranty. It is not the end of the world if I can't use the included charger I just want to see how fast this phone truly charges.
Either this post is a joke or someone sold you a non supercharge Huawei charger. Also are you using both the charger and charging cable that came with the phone in the box. It's white with purple in the USB A area
Here from 10 to 80% in 45 minutes
Same here. I find the first 80% to be lightning quick and then it slows to a "normal" charging speed for the last 20%.
Must be something wrong with your charger or cable.
Sent from my MHA-L29 using Tapatalk
Using the european adapter, not the UK one, but charging is lightning fast for me as well.
hi
the orginal adapter and cable
i charge from 0% to 90% in about 55 minutes, the last 10 % are slower maybe 30 minutes to full
greetz benji
Mine took almost 2 hours from 48% to 100%. I'm using Original Huawei charger.......
Install ampere and see what the milliamp charge rate shows as. When the battery is almost dead it should charge at just under 5 amps and will slowly decrease as the battery level increases.
Mine typically goes from 0 to 65% in half an hour, then 90% around half an hour on top of this. The final 10% takes almost another hour.
Sent from my MHA-L29 using Tapatalk
sinkoo1979 said:
Mine took almost 2 hours from 48% to 100%. I'm using Original Huawei charger.......
Click to expand...
Click to collapse
Well there is obviously something wrong with your charger, cable or phone. I would guess the first two.
Mine turbocharges in a few minutes. I've been using fir about a year now.
Could be that an "European" charger intended for 220 volts does not provide rapid charge when plugged into a 110 volts wall plug. I have for example an electric toothbrush I bought here in Europe and it refuses to charge on a 110 volt system when using an adapter. Maybe see if you can buy an OEM charger intended for the US?
There are 2 different chargers that are official, there's the supercharge one that comes bundled with the phone which I guess everyone is using and is getting great charging speeds... (Gotta use both the charger and the cable)
And then there's the fast charger which is pretty slow compared to the bundled charger.
The next time you wanna travel abroad make sure you buy a supercharger for that regions type of socket.
Sent from my MHA-L29 using Tapatalk
If you buy a replacement make sure it actually says SuperCharge on it.
Sent from my MHA-L29 using Tapatalk

Categories

Resources