CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/Your warranty is now void!
/I am not responsible for bricked devices, dead SD cards, thermonuclear war,
/or you getting fired because the alarm app failed. Please do some research
/if you have any concerns about features included in this ROM before flashing it!
/YOU are choosing to make these modifications, and if you point the finger at
/me for messing up your device, I will laugh at you.
/[B]Submitting bug reports on nightly builds is the leading cause of male impotence[/B].
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/
Root:
HERE - By @autoprime
Recovery:
TWRP HERE
Instructions:
First time flashing CyanogenMod 11 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Already on CM11, try a dirty flash.
Reboot into recovery
Make back up <optional>
Wipe cache, system, dalvik-cache
Install ROM, GApps and optional Superuser app
Reboot
Bug Reports: How to report a bug?
Check post #2 to see if it has been reported.
Search thread first or at least attempt to. Yes, we all know XDA can be difficult to search but try to search this thread only first.
If you have issues and have used TiBu or any other app restore program then perform a clean install without restoring apps to see if you can replicate before reporting.
List the following info: ROM build date, what you were doing and can you replicate it.
Get a logcat if possible.
Download: CM11 nightly builds
HERE
Google Apps: Optional add on package that allows Google Play services such as Google Play Store and other Google Apps outside of AOSP based ROMs.
Check THIS post
Changelog:
CyanogenMod Change Log HERE
G3 Specific Change Log HERE
AndroidUser00110001 Change Log HERE
invsisblek Change Log HERE
XDA:DevDB Information
Cyanogenmod 11, ROM for the AT&T LG G3, ROM for the AT&T LG G3
Contributors
timmytim, invisiblek, AndroidUser00110001
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Cyanogenmod
Version Information
Status: Nightly
Stable Release Date: 2014-12-05
Created 2014-12-08
Last Updated 2014-12-09
Mine!
Nice
??
Official CM11 at last, this is great! I clean flashed and everything is very stable so far, especially for a nightly.
Sent from G3 running CM11
Congrats on being official!
Mind opening up the Q&A? There's no Q&A tab yet.
Thanks for all the hard work!
Maroon Mushroom said:
Mind opening up the Q&A? There's no Q&A tab yet.
Thanks for all the hard work!
Click to expand...
Click to collapse
The QA Bot hasn't created the thread yet. If it isn't created by tomorrow then I will make sure one gets opened. Thanks for letting me know
Moved to PM
Will give this a shot. Thanks m8.
Any known issues (camera/video, etc...)?
How is this running ? I'm on power user ROM cause its awesome with rin kernel. But I always have to have some Cm... Running good ?.. Yo Tim have you heard anything on ir blaster integration ? Its kind of a must have. Are you running this ? Hope all is well.!:thumbup:
2SHAYNEZ
shayneflashindaily said:
How is this running ? I'm on power user ROM cause its awesome with rin kernel. But I always have to have some Cm... Running good ?.. Yo Tim have you heard anything on ir blaster integration ? Its kind of a must have. Are you running this ? Hope all is well.!:thumbup:
2SHAYNEZ
Click to expand...
Click to collapse
Personally I'm now running my Candy5 ROM. I'm loving me some Lollipop!
shayneflashindaily said:
How is this running ? I'm on power user ROM cause its awesome with rin kernel. But I always have to have some Cm... Running good ?.. Yo Tim have you heard anything on ir blaster integration ? Its kind of a must have. Are you running this ? Hope all is well.!:thumbup:
2SHAYNEZ
Click to expand...
Click to collapse
Super smooth! No hangups yet!
@timmytim did they stop making nightly builds? Haven't seen one go live since Dec 6th.
objektive_1 said:
Super smooth! No hangups yet!
@timmytim did they stop making nightly builds? Haven't seen one go live since Dec 6th.
Click to expand...
Click to collapse
I dont think so. CM skips nightlies for some reason, not sure why. Hopefully we will see one tonight or tomorrow night at the latest.
timmytim said:
I dont think so. CM skips nightlies for some reason, not sure why. Hopefully we will see one tonight or tomorrow night at the latest.
Click to expand...
Click to collapse
This is stable enough for me to use as an everyday (12/6 nightly). Will OTA update list show when an official stable version releases? Will I be able to update CM versions OTA using the update feature in settings? Great work last CM i used was CM 7 for my HTC One X hahaha:good::good:
timmytim said:
I dont think so. CM skips nightlies for some reason, not sure why. Hopefully we will see one tonight or tomorrow night at the latest.
Click to expand...
Click to collapse
tonight it is... 20141209 is there :good:
Camera quality seems to be great on CM11. I tested this next to a stock Verizon G3 and the only difference I noticed between the 2 would be the color temperature. One macro image I took with both was noticeably better on the one with CM11.
so does the laser auto focus still seem to function correctly with this?
is there any real way to verify that it is working except supposed time to capture image by estimation
Best flashed rom yet... Tried Liquid Smooth and ran into a bunch of different issues and wanted something more stable. This runs fast and smooth, no issues as of yet. Wish the LG quick remote would one day work on this rom. Thanks for posting!
Bodymore420 said:
Best flashed rom yet... Tried Liquid Smooth and ran into a bunch of different issues and wanted something more stable. This runs fast and smooth, no issues as of yet. Wish the LG quick remote would one day work on this rom. Thanks for posting!
Click to expand...
Click to collapse
Try a universal remote and report back..... Or maybe making your own universal remote through qremote
2SHAYNEZ
Related
This thread is reserve for nightly build of CyanogenMod Rom for HTC Desire HD
CyanogenMod is a free, community built distribution of Android 2.2 (Froyo) which greatly extends the capabilities of your phone.
Code:
** These CyanogenMod builds are highly experimental and unsupported.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on nightly builds is the leading
** cause of male impotence.
What are Nightly build? Auto compiled build of the latest CyanogenMod source from github. This version change each night and aren't officialy supported.
If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Warning : Not for new user, flash this build only if you know what you are doing !!!
INSTRUCTIONS:
- First time flashing CM 6 to your Desire (or coming from another ROM)?
1. Root your device and install Clockwork Recovery.
2. Do a Nandroid backup!
3. WIPE (wipe data/factory reset + wipe cache partition)
4. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM6?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
There are no Google Apps bundled with CM ROMs, because Google asked Cyanogen to remove copyrighted apps, after flashing rom don't forget to flash Google Addon package if you want it.
Latest version: http://mirror.teamdouche.net/?device=ace
before flash is recommended to check the md5sum
CyanogenMod Enhancement:
ChangeLog / Twitter
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
reserved
10 char 10 char
I bow down to Kali and all of team douche. Christmas is here early this year.
Sent from Cyanogenmod for Desire HD
Nightly !!!! YES...Cyanogen cannot be matched.
rixsta said:
Nightly !!!! YES...Cyanogen cannot be matched.
Click to expand...
Click to collapse
What does this mean exactly ? its updated nightly ? or ... haha
a nightly-build contains all the newest changes which come step-by-step.
all the changes will be offered in a new release candidate if there are stable and harmonize.
so if you always want the newest fixes, patches and so on..you have to flash the nightly-builds. but there is no guarantee that it is stable.
if you want a stable build you have to wait for the rc
sorry for my bad english
rixsta said:
Nightly !!!! YES...Cyanogen cannot be matched.
Click to expand...
Click to collapse
That's right. Although it would be awesome if another team were to try.
mero01 said:
What does this mean exactly ? its updated nightly ? or ... haha
Click to expand...
Click to collapse
Team Douche do work on the rom every day. You can see what commitments they make to the code on the git hub. Every night an automated build bot compiles the code into a flashable rom. As stated in the op, these are experimental builds which add new features but may be quite buggy. In my experience with the nexus one they are usually very stable apart from the odd annoying glitch.
Most importantly for bleeding edge lovers like myself you get to check out new features before, often weeks before, people using the stable branch.
Sent from Cyanogenmod for Desire HD
dr.m0x said:
Team Douche do work on the rom every day. You can see what commitments they make to the code on the git hub. Every night an automated build bot compiles the code into a flashable rom. As stated in the op, these are experimental builds which add new features but may be quite buggy. In my experience with the nexus one they are usually very stable apart from the odd annoying glitch.
Most importantly for bleeding edge lovers like myself you get to check out new features before, often weeks before, people using the stable branch.
Sent from Cyanogenmod for Desire HD
Click to expand...
Click to collapse
But, now Cyanogen has got all organised, at this stage in the cycle i.e prior to release of the stable version it tends to mainly be bug-fixes rather than additional features so in my experience these late nightly release are often better than the RC's on which they are based
dr.m0x said:
That's right. Although it would be awesome if another team were to try.
Team Douche do work on the rom every day. You can see what commitments they make to the code on the git hub. Every night an automated build bot compiles the code into a flashable rom. As stated in the op, these are experimental builds which add new features but may be quite buggy. In my experience with the nexus one they are usually very stable apart from the odd annoying glitch.
Most importantly for bleeding edge lovers like myself you get to check out new features before, often weeks before, people using the stable branch.
Sent from Cyanogenmod for Desire HD
Click to expand...
Click to collapse
Oh thank you for that . Sounds great going to give it a go
Can you post a link to the github thread or update post ? would like too see all the next features n whatnot cant seem to find it
thanks
ghostofcain said:
But, now Cyanogen has got all organised, at this stage in the cycle i.e prior to release of the stable version it tends to mainly be bug-fixes rather than additional features so in my experience these late nightly release are often better than the RC's on which they are based
Click to expand...
Click to collapse
Good point. Until Cyanogenmod 7 (Gingerbread) we probably won't see any new features.
Can't post link to git hub right now but google "cyanogenmod git hub" should take you right there.
Sent from Cyanogenmod for Desire HD
Thats actually pretty insane, NIGHTLY UPDATES . what more could you ask for ... iv been waiting for updates on other roms for weeks now...
The ROM is great but it drains the battery too quickly. Can someone help me on this.
Great to get nightlies, new to Android but well used to this from XBMC, open source ftw.
lisboapcs said:
The ROM is great but it drains the battery too quickly. Can someone help me on this.
Click to expand...
Click to collapse
Would have to disagree, took mine off charge this morning and used it throughout the day heavy enough including FM Radio, PowerAMP, browser, some apps and watching TV on the journey home and battery is at 51% now.
hi i'm new to Android and have a few questions. Just flashed this rom and it looked amazing except that I didn't have market or any other apps. Is it just me (do those apps fall under the Google stuff mentioned earlier? And is it possible to get my contacts from leedroid (just switched after full wipe) also would it help if I flashed the "normal" CM and install the nighty Rom s update ?Anyone can help me? Thx in advance
Sent from my Desire HD
deadcookie said:
hi i'm new to Android and have a few questions. Just flashed this rom and it looked amazing except that I didn't have market or any other apps. Is it just me (do those apps fall under the Google stuff mentioned earlier? And is it possible to get my contacts from leedroid (just switched after full wipe) also would it help if I flashed the "normal" CM and install the nighty Rom s update ?Anyone can help me? Thx in advance
Sent from my Desire HD
Click to expand...
Click to collapse
yup market, gmail, maps etc come under the GAPPS package which you have to flash after flashing cyanogen mod.
If you sync your contacts to your gmail then it should be restored after entering your account details with the new rom
And it doesn't matter if you install the normal CM and then install the nightly, you can just jump straight into the nightly if you want. As previously stated, normal is a stable release whereas nightly is untested but usually stable.
deadcookie said:
hi i'm new to Android and have a few questions. Just flashed this rom and it looked amazing except that I didn't have market or any other apps. Is it just me (do those apps fall under the Google stuff mentioned earlier? And is it possible to get my contacts from leedroid (just switched after full wipe) also would it help if I flashed the "normal" CM and install the nighty Rom s update ?Anyone can help me? Thx in advance
Sent from my Desire HD
Click to expand...
Click to collapse
yes you need to get the google addons for theDHD its HDPI-20101114
http://goo-inside.me/google-apps/
but if you downloaded the rom from rom manger it asks you if you want the google add-ons after the rom as well.
when you install google add-ons sould get your contacts back
only need to do full wipe if you coming from a different rom, eg leedroids rom, if already using CM 6.1 rc2 or rc1 just need to flash the nightly over it.
Thx a lot you both saved my day
Sent from my Desire HD
So any one care to comment what extra feature or u got repair on this NB ? Cop are to the RC
Tis exciting!
Yes! Nightly builds. I have been missing those. Even considered switching back to N1 just for my Nightly fix (and trackball).
Sent from my CM powered Desire HD
Well I'm running nightly build 6 and being on such a low build number got me all hot and bothered. No issues to report so far.
Sent from Cyanogenmod for Desire HD
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
This version is a release candidate, but you will find it stable for everyday use.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the Hero CDMA, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full ourput.
Please use Pastebin when possible.
Download Links:
Official posthttp://forum.cyanogenmod.com/topic/20126-cyanogenmod-7-for-the-htc-hero-cdma-v703-5-may-2011/Latest version: update-cm-7.0.3-Heroc
Download: link
Mirror: link
MD5sum: 69a4fbd52fef795e48a6ae1707637bcaGoogle Apps addon:
Version: gapps-gb-20110307
Mirror: link
Mirror: linkThe CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
\o/
10char
nice.. i love coming in here and seeing new posts about new roms. my f5 mission was a success! will be checking this one out.
I'm using aosps cm7 what exactly is the difference n this one haha
Sent from my HTC Hero CDMA using XDA App
You might want to change the OP to say HeroC instead of Nexus S
BlaqkAudio said:
You might want to change the OP to say HeroC instead of Nexus S
Click to expand...
Click to collapse
What are you talking about
Thanks gonna download. Ahhhh just like the good ol days. Been waiting a while for this rom now I just have to wait for a theme. Nevertheless thanks.
Yea its me Again With the
Modified Hero-
*sigh*
Still having homescreen lag + notfication bar lag. I wonder when it'll get fixed, I think aosp managed to totally iron out the popup dialog animations a few builds back, but I think it came back.
I wonder what it is that does this? Anyone else who's experiencing the same, feel free to chime in, this time I'm looking to see if we share something common about our phones.
(This is in comparison to Froyo)
RC2 already! That was really fast!!
I know the camera quality has been an issue in all the nightlies thus far. Is this release any different?
c00ller said:
RC2 already! That was really fast!!
I know the camera quality has been an issue in all the nightlies thus far. Is this release any different?
Click to expand...
Click to collapse
I think jaybob and I found the problem with the camera quality.. should be in nightlies after one of us submits patch to heroc props.
(I think wjb already did, so we wait).
Speechless...
Sent from my HERO200 using XDA App
What is RC2?
Sent from my HERO200 using XDA App
Boot loops for me , after I wiped everything and installed fresh even.
Rc2 already? I don't recall an rc1. Anyhoo, sweet! Thanks, guys!
-----
Sent from my CDMA Hero. I got some hot Gingerbread-on-Hero action here!
Decad3nce said:
What are you talking about
Click to expand...
Click to collapse
curious about this comment too since this is in the hero cdma forum.
this is tempting to get in on, especially now that i know that you are working on this deca.. anyone know how s0be's .35 kernel works with this rom? i get it to work fairly well with aosp's build..
LiquidSolstice said:
*sigh*
Still having homescreen lag + notfication bar lag. I wonder when it'll get fixed, I think aosp managed to totally iron out the popup dialog animations a few builds back, but I think it came back.
I wonder what it is that does this? Anyone else who's experiencing the same, feel free to chime in, this time I'm looking to see if we share something common about our phones.
(This is in comparison to Froyo)
Click to expand...
Click to collapse
I was experiencing the same and it turned out to be a widget on my homescreen. In my case, it was Pure Messenger Widget. If you're running any widgets, try losing them.
rigmort said:
I was experiencing the same and it turned out to be a widget on my homescreen. In my case, it was Pure Messenger Widget. If you're running any widgets, try losing them.
Click to expand...
Click to collapse
Interesting theory, I'll give that a shot the next time i flash. Thanks!
BTW, RC2 is running flawlessly for me so far.
sooo.... this.....or aosp.....or the nightlies.....hmm...
Sent from Enrique Iglesias.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Q&A Thread
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 11.0 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery (see here)
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Useful Links
Unofficial changelog
d2vzw CyanogenMod wiki
Jira issue tracker
DO NOT REPORT BUGS FOR NIGHTLY BUILDS!
Other Issues?
Before posting on this thread, make sure of a few things:
Make sure you have the LATEST version of ClockworkMod recovery. Other recoveries may work but will not be supported by CyanogenMod
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: https://play.google.com/store/apps/...t=W251bGwsMSwyLDEsImNvbS50b3J0ZWwuc3lzbG9nIl0
Experience issues? As these are nightlies, bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
Download Links
CyanogenMod:
Unified Nightly: http://download.cyanogenmod.org/?device=d2lte&type=nightly
Google apps addon:
Download: http://wiki.cyanogenmod.org/w/Google_Apps
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 11.0 Nightlies for the Verizon Galaxy S3, ROM for the Verizon Samsung Galaxy S III
Contributors
invisiblek
Version Information
Status: Testing
Created 2013-12-07
Last Updated 2014-06-23
mine!
Thanks, excited to try this out.
Sent from my SCH-I535 using XDA Premium 4 mobile app
What is working / not working?
Is it exfat compatible for the SD card and is the front facing camera working without issues?
Sent from my SCH-I535 using Tapatalk
Might be a good idea to include a note about making sure you're on the latest firmware under the Before posting on this thread section. That seems to be a big issue for a lot of people.
GApps
Should we use the PA KitKat gapps when flashing or use the 11-19 gapps you have in your collection?
NVM I answered my own question.
So glad to see your name in this forum. A trusted name for years now! Thank you so much Invisiblek!
Is this based one 4.4.1 yet? Will the camera upgrades make its way to us on the S3 or were they just for the N5? Just wondering.
saldomontoya said:
Should we use the PA KitKat gapps when flashing or use the 11-19 gapps you have in your collection?
NVM I answered my own question.
Click to expand...
Click to collapse
If you answered your own question, could you share it, please? Which GAPPS?
The Rom is flying and has been stable for a few hours with ART enabled. It doesn't have any flickering issues another 4.4 rom I flashed last night. Love it!
sanjsrik said:
If you answered your own question, could you share it, please? Which GAPPS?
Click to expand...
Click to collapse
I'm using PA Gapps. So far so good.
ojpd said:
The Rom is flying and has been stable for a few hours with ART enabled. It doesn't have any flickering issues another 4.4 rom I flashed last night. Love it!
I'm using PA Gapps. So far so good.
Click to expand...
Click to collapse
Could you post a link please?
sanjsrik said:
Could you post a link please?
Click to expand...
Click to collapse
Invisiblek has a link for his 4.4 gapps in the first post.
http://invisiblek.org/gapps/
ojpd said:
Invisiblek has a link for his 4.4 gapps in the first post.
http://invisiblek.org/gapps/
Click to expand...
Click to collapse
Thank you very very much.
sbattosai said:
What is working / not working?
Is it exfat compatible for the SD card and is the front facing camera working without issues?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I don't know about exfat but it does recognize ext sd card and camera works fine ffc and normal.:good:
Does flashing this wipe my SD card completely?
Sent from my SCH-I535 using Tapatalk
One thing to note, DO NOT flash over the 10.2 or any ohter nightly. I get constant reboots.
I had to wipe all and flash from scratch.
---------- Post added at 11:35 AM ---------- Previous post was at 11:32 AM ----------
One thing to note, DO NOT flash over the 10.2 or any ohter nightly. I get constant reboots.
I had to wipe all and flash from scratch.
rom review
post flash- clean flashed rom, gapps, restored from TiBU, flashed kanged gapps and kt kernel and everything is working perfectly so far! Awesome rom!
Thanks Invisiblek for this thread and your work!
I got some early errors with gapps crashing after I switched over to ART but rebooting after that, haven't had a problem.
Not supposed to be using ART on this phone. Its for devs only. No need for it. It doesn't do anything except make certain apps unusable.
TokedUp said:
Not supposed to be using ART on this phone. Its for devs only. No need for it. It doesn't do anything except make certain apps unusable.
Click to expand...
Click to collapse
yea, i see no advantage to using ART. and updating is no fun with it either.
TokedUp said:
Not supposed to be using ART on this phone. Its for devs only. No need for it. It doesn't do anything except make certain apps unusable.
Click to expand...
Click to collapse
RayMcGrath said:
yea, i see no advantage to using ART. and updating is no fun with it either.
Click to expand...
Click to collapse
Thanks for the information guys. I appreciate it. Its turned on now and everything works for me - I'll probably shut it off if something becomes unstable.
I did notice that the "Location" item in the Quick Settings menu says it is off even though location services are turned on. Not a big deal I don't toggle it very often but just thought I'd mention it.
Also, anyone know any setting to make the new launcher do landscape?
Development thread: http://forum.xda-developers.com/showthread.php?t=2558946
invisiblek said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.1 (Kitkat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 11.0 your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery (see here)
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Useful Links
BBQLog changelog
d2vzw CyanogenMod wiki
Jira issue tracker
DO NOT REPORT BUGS FOR NIGHTLY BUILDS!
Other Issues?
Before posting on this thread, make sure of a few things:
Make sure you have the LATEST version of ClockworkMod recovery. Other recoveries may work but will not be supported by CyanogenMod
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: https://play.google.com/store/apps/...t=W251bGwsMSwyLDEsImNvbS50b3J0ZWwuc3lzbG9nIl0
Experience issues? As these are nightlies, bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
Download Links
CyanogenMod:
Nightly: http://download.cyanogenmod.org/?device=d2vzw&type=nightly
Google apps addon:
Download: http://goo.im/gapps (use latest 4.4 gapps)
Mirror: http://invisiblek.org/gapps/
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 11.0 Nightlies for the Verizon Galaxy S3, a ROM for the Verizon Samsung Galaxy S III
Contributors
invisiblek
Version Information
Status: Testing
Click to expand...
Click to collapse
Make sure you have the LATEST version of ClockworkMod recovery. Other recoveries may work but will not be supported by CyanogenMod
Make sure you have the LATEST firmware, found here
You've utilized the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: https://play.google.com/store/apps/...t=W251bGwsMSwyLDEsImNvbS50b3J0ZWwuc3lzbG9nIl0
is it OK to use PA 4.4 gapps from 11/26 with cm 11 ?
Sent from my SCH-I535 using Tapatalk
0331 said:
is it OK to use PA 4.4 gapps from 11/26 with cm 11 ?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Yes.
Cool .thank you.
Sent from my SCH-I535 using Tapatalk
Any reason my phone *always* reboots twice when i reboot it when I am on cm11? Never did it on 10.2.
Restola said:
Any reason my phone *always* reboots twice when i reboot it when I am on cm11? Never did it on 10.2.
Click to expand...
Click to collapse
It seems to be a common, known issue right now. I'm not sure what the cause of it is.
can we get a quick rundown of any major bugs/what's not working so far?
harry_seaward said:
It seems to be a common, known issue right now. I'm not sure what the cause of it is.
Click to expand...
Click to collapse
That happened for me on 10.2. Not a dealbreaker.
Sent from my SCH-I535 using Tapatalk
---------- Post added at 04:15 PM ---------- Previous post was at 04:09 PM ----------
MWFD said:
can we get a quick rundown of any major bugs/what's not working so far?
Click to expand...
Click to collapse
I'm on 12/9 and I am experiencing no major bugs. Just make sure you use 4.4 gapps (I'm using invisiblek's latest in his OP post). Your milage may vary but I have no reason against using it as a daily driver. Just do a nandroid backup and if you have issues you can fall back to it. My only complaints are minor: the LTE toggle I added to quick settings appears to be buggy/not work. But I changed mobile network settings to CDMA/EDVO auto and that works for me. I needed to install the Google Keyboard before I could type anything but that was before I flashed gapps. Do a factory reset before flashing etc and let us know how it goes!
Sent from my SCH-I535 using Tapatalk
---------- Post added at 04:23 PM ---------- Previous post was at 04:15 PM ----------
I can't seem to find where to go to disable the volume indicator sound when adjusting the volume. Is that missing? I looked though all settings categories.
Sent from my SCH-I535 using Tapatalk
Can we dirty flash from CM 10.1.3?
Zacharybinx34 said:
Can we dirty flash from CM 10.1.3?
Click to expand...
Click to collapse
Based on what I've read from people's experiences switching to 4.4, I would say no. It simply won't boot. Wipe the usual and do a clean install. In general, when in doubt, clean install, 'cause why not?
YevOmega said:
Based on what I've read from people's experiences switching to 4.4, I would say no. It simply won't boot. Wipe the usual and do a clean install. In general, when in doubt, clean install, 'cause why not?
Click to expand...
Click to collapse
because it's sort of a pain to do.
Do you know if everything is working?
Zacharybinx34 said:
because it's sort of a pain to do.
Do you know if everything is working?
Click to expand...
Click to collapse
On 4.4? I haven't personally tried it yet. I've been busy. Once again, from what I've read, people are amazed at how from the first nightly on, this has basically been daily driver material.
Which Google Apps pack do I want for this? Thanks
Sent from my SCH-I535 using XDA Premium 4 mobile app
Just installed, smooth once I got the newest version of ClockwerkMod.
Question, I see CM11 replaced it's old launcher with two new ones, "Launcher" and "Launcher 3".
What is the difference?
Zacharybinx34 said:
Which Google Apps pack do I want for this? Thanks
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I did a semi "dirty" install over 10.2 RC1 and things like bluetooth and the Google keyboard proved buggy. I have just formatted, wiped cache and dalvik and installed 12/12 nightly fresh. I used the gapps from 12/8 found in the link in the development thread. I used the mirror at invisiblek. Seems much better now.
Edit:
Is anyone else having trouble with their Bluetooth devices reconnecting once paired, powered down, then powered back up? I have a Motorola Elite flip. I pair it. It works. Then if I shut it off it needs to be resynched upon powering up.
How's the camera resolution on CM4.4.1 compared to stock TW? Thx in advance!
Sent from my SCH-I535 using Tapatalk
Google+ Locations FC?
Hello,
Installed the 12-12 Nightly and am having a problem with Google+.
When I try to access "Locations" (the old Latitude option on Google Maps) to see my friends, I get a FC.
Anyone else get this?
Thanks!
Thinking about going from CM10.2 Stable to CM11 here in a bit. Just a (probably really stupid) quick question: How do I determine what my current firmware is without much trouble? I'd rather not worry about updating that if I don't need to once the time comes.
I see the OP links to VRBMF1 firmware, which is what my Baseband version says (I535VRBMF1) in Settings > About, but I'm not sure if those are one in the same or not. Thanks.
DigitalZips said:
I see the OP links to VRBMF1 firmware, which is what my Baseband version says (I535VRBMF1) in Settings > About, but I'm not sure if those are one in the same or not. Thanks.
Click to expand...
Click to collapse
They are the same. You're good to go.
harry_seaward said:
They are the same. You're good to go.
Click to expand...
Click to collapse
Thank you very much! Good to know. I think I'll give a 4.4.x build a go after a few more nightlies are released then.
[ROM][Official]CyanogenMod 12.1 Nightlies for the Verizon Galaxy S3 (d2vzw)
CyanogenMod and D2VZW: Together Again!
--------------------DANGER!! CMUpdater is providing the new CM13 Marshmallow nightly builds and notifying you of an update. IT SEEMS THERE ARE NO MORE UPDATES FOR CM12! 12/10 seems to be the last one. If you flash CM13 without looking into things first, you could be in for a world of hurt! Check out invisiblek's Official CM13 Nightlies thread in this same forum. BEWARE!!--------------------
De-unified Lollipop builds for the Galaxy S3 line. This is for the Verizon variant (SCH-I535) only
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x which is designed to increase performance and reliability over stock Android for your device.
Notes:
Please Use Firmware: VRBMF1
and
Modem/Baseband Version: NE1 (Also, see "Notes - Possible Bugs" section below)
(EDIT: The following statement might not be true. It happened to one user. Unsure about circumstances... If you've done it or want to try, please tell us what happens.)If you have recently downgraded firmware from 4.3 to 4.1.2, DO NOT flash the MF1 firmware. You'll brick your device!
If you know you never took the 4.3 OTA, then you can flash the firmware and modem to your hearts content.
CWM Recovery addicts: Please seriously consider giving up CWM and come on board with what works for sure with 5.1.x, TWRP. Problems have been coming up with CWM users so if you have one, that's were to start. Hopefully there's a 12-step program somewhere for y'all
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will put a picture
* of you up and throw darts at it.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit the Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Regarding the Stagefright Exploit: The latest patch update to protect against the security vulnerability was merged for the 8/14 nightly. Please update to that or later to make sure you are fully protected, though work still continues.
XDA Article on the Stagefright Exploit: http://www.xda-developers.com/stagefright-explained-the-exploit-that-changed-android/
Download Links :: Download Links Broken!! - On or about 12/18 the links for 12.1 ceased to function. The links for 12.1 and 13 are all listed on the same page at the moment as well. While 12.1 builds have continued to come out every few days or so for other devices, the last one for the d2vzw is for 12/10 at the moment. I don't know if this is a temporary of permanent state of affairs but inquiries are forth coming. In the mean time, the 12/10 build is in the "d2vzw ROM Extras" link below so at least we got that, thanks to XdrummerXboy.
Also, if you have a build from about 11/15 and later hanging around you could upload it for others to access, if need be, by following the instructions from this post: Upload Instructions
CyanogenMod:
Nightly: http://download.cyanogenmod.org/?device=d2vzw&type=nightly LINKS ONLY WORKS FOR CM13 NOW!!
Download with daily commits tracked:http://www.cmxlog.com/12.1/d2vzw/
>>These are the de-unified d2vzw builds now instead of the d2lte builds you previously used<<
Google apps addon:
TK Modular GApps by TKruzze. Get your GApps from the Master. Follow his installation instructions.
Open GApps:opengapps.orgThey are modular AND have the option of Aroma Installer. Updated daily. Very interesting story on these. There is the website, and an XDA thread.
>>>WARNING!!<<< The first time one installs Open GApps, you have to do it with a ROM update (or reinstall current ROM) AND manually wipe the system partition first. Then install the ROM and the GApps normally, then wipe Dalvik and Cache. After that, you can flash them anytime. (More info on Website.) ALSO, for now, don't install Webview as it might not work. There is an "Android System Webview" in the Play Store that will work.
Other Options:
The Gapps Central For those of you who just have to be different, a GApps Smorgasbord, by TheXGX
Banks Gapps removed after just one too many malfunctions... If you use 'em and have a problem, update from the Play Store your offending app or flash one of these others, but don't come complainin'.
Firmware and Modem thanks to Invisiblek
Download - MF1 firmware with NE1 modem Combo: http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip (md5sum: 7a49bb13c1160f4d4a89488127684b5b)
A MF1 firmware only zip is in the "d2vzw ROM Extras" link below, as well as individual modem choices.
Other Possibly Useful Stuff
d2vzw ROM Extras
Link to TWRP Recovery You can flash the .img file right in TWRP recovery 2.8.4 or later!
- All you ever wanted to know about how Cell service works but were afraid to ask: Cell Wiki
- Samsung Galaxy S 3 the most popular phone of all time? Still? https://en.wikipedia.org/wiki/Samsung_Galaxy_S_III
Notes - Possible Bugs
Bluetooth observed as flaky with some connected devices.
CMUpdater apparently only functional with TWRP 2.8.7.0
4G/LTE Data might not start on bootup (lately) - With Wifi disconnected or off, go to Settings>Mobile Networks>Access Point Names and select one of those not already selected. Give it a few seconds. Should be good till next reboot.
Addendum to Data Issue: If you can't live with the above solution (like me) then downgrading to the ML1 modem has fixed it, seemingly without any ill effects. Modem is in the "d2vzw ROM Extras" link above.
>>Attention ATT, T-Mobile and other GSM Network Users (International)<<
If you use your d2vzw on one of the GSM networks, you will have to flash the d2gsm_rilblobs.zip file in the 'd2vzw ROM Extras' link above or your phone won't operate properly!
The CyanogenMod team (of which I'm not a member) always thanks everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Another Note: CM12 was introduced to our phone first by mastamoon and Invisiblek: Many thanks to them! There may be data on those threads that can help someone, so I've included those links for reference:
Mastamoon's Unofficial CM12 (and cm11) thread.
Invisiblek's Unofficial CM12 thread by amf66.
<Disclaimer: OP is not a Dev. Just a normal schlub.>
XDA:DevDB Information
[ROM][Official] CyanogenMod 12.1 Nightlies for the Verizon Galaxy S3 (d2vzw), ROM for the Verizon Samsung Galaxy S III
Contributors
Master Cylinder, Nardholio, Device Maintainer: Nardholio
Source Code: http://github.com/CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: VRBMF1
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-05-20
Last Updated 2017-06-10
YES!!! Long live the GS3... ?
Would it be a good idea to link the old thread in the OP? I can understand both sides, including it or leaving it out, though.
Sent from my SCH-I535 using XDA Free mobile app
NoCrAppleHere said:
YES!!! Long live the GS3... ?
Click to expand...
Click to collapse
Agreed!
Sent using Tapatalk
Master Cylinder said:
Notes:
Please Use Firmware: VRBMF1
and
Modem/Baseband Version: NE1
Click to expand...
Click to collapse
A link or two would be a great addition.
Thanks for the thread!
phonetool said:
A link or two would be a great addition.
Thanks for the thread!
Click to expand...
Click to collapse
@Master Cylinder, you can use mine for now.. http://mastamoon.truelinux.net/firmware/ Just note that you have to flash the firmware first, then the modem. Otherwise the firmware, which contains a modem, will overwrite the newer modem.
CyanDelta sounds greate. However, I get FC with it. Reboot does not help.
I'm on 5/13 nightly.
Anyone has the similar problem?
yorkwar said:
CyanDelta sounds greate. However, I get FC with it. Reboot does not help.
I'm on 5/13 nightly.
Anyone has the similar problem?
Click to expand...
Click to collapse
And you downloaded or had a 5/13 build zip to operate from to setup? And you had at least 750mb free space before pushing the zip over or dloading it? Maybe one needs more than that amount space? When did it fc?
When looking at the Google Apps linked above, what is the difference between arm and arm64?
Sent from my ME173X using XDA Free mobile app
XdrummerXboy said:
Would it be a good idea to link the old thread in the OP? I can understand both sides, including it or leaving it out, though.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
It's a good thought. Hmmm.... In 2 weeks this will have 15 pages and probably no need to go back, but I'm certainly still open to it if others want it.
phonetool said:
A link or two would be a great addition.
Thanks for the thread!
Click to expand...
Click to collapse
mastamoon said:
@Master Cylinder, you can use mine for now.. http://mastamoon.truelinux.net/firmware/ Just note that you have to flash the firmware first, then the modem. Otherwise the firmware, which contains a modem, will overwrite the newer modem.
Click to expand...
Click to collapse
Thanks masta. Yeah, I was contemplating putting up Dropbox links (was a little blurry eyed last night.) I just remembered Invisiblek still has some up. Also, I guess I could put up Google Drive links which are never gonna go away....
brandonb0013 said:
When looking at the Google Apps linked above, what is the difference between arm and arm64?
Sent from my ME173X using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I knew I'd left an unanswered question there. They just started listing them this way. Use the 'arm' which is for our phone. I'll update that on the OP, maybe put a little explanation, when I get more coffee in me... :silly:
Yeah I knew I'd left an unanswered question there. They just started listing them this way. Use the 'arm' which is for our phone. I'll update that on the OP said:
Great. I love how everyone is quick to answer any questions people have. That's what makes flashing so enjoyable. Anywho, when I do my next flash, I'm going to try using those linked gapps. Changing of it fixing my BT crashes? Probably slim to none. But it's worth a shot!
Sent from my ME173X using XDA Free mobile app
Click to expand...
Click to collapse
1 vote to link both earlier threads
Would be good to link MM's and amf66’s Invisiblek threads. There's a lot of info and the Cm12x development progressed very quickly, so most info is still fairly current.
But then, I minored in history, sooo....
XdrummerXboy said:
Would it be a good idea to link the old thread in the OP? I can understand both sides, including it or leaving it out, though.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
AyUaxe said:
Would be good to link MM's and amf66’s Invisiblek threads. There's a lot of info and the Cm12x development progressed very quickly, so most info is still fairly current.
But then, I minored in history, sooo....
Click to expand...
Click to collapse
The speed of progress is what makes those threads age so quickly, but for those of you who are sentimantal, and to afford worthy applause to @mastamoon and @invisiblek, I've put in links.
"Another Note: CM12 was introduced to our phone first by mastamoon and Invisiblek: Many thanks to them! There may be data on those threads that can help someone, so I've included those links for reference:
Mastamoon's Unofficial CM12 (and cm11) thread.
Invisiblek's Unofficial CM12 thread by amf66."
Links work there.
OK, gonna try a clean install with the gapps in the op. Try not to restore from titanium as much as possible. This last install I had bluetooth problems and lost count of the restarts whether charging or not. See how this goes.......
stevet86 said:
OK, gonna try a clean install with the gapps in the op. Try not to restore from titanium as much as possible. This last install I had bluetooth problems and lost count of the restarts whether charging or not. See how this goes.......
Click to expand...
Click to collapse
What kind of bt issues? Bt share has stopped? Also, i never had issues with reboots on any flashes I've performed. Only issue for me is bt.
Sent from my ME173X using XDA Free mobile app
Why no updates since the 18th?
Shakes The AssClown said:
Why no updates since the 18th?
Click to expand...
Click to collapse
Yeah, it's been a few and there's a lot of commits piling up but he did put out builds for 17 days in a row so I guess we got to cut him some slack.
brandonb0013 said:
What kind of bt issues? Bt share has stopped? Also, i never had issues with reboots on any flashes I've performed. Only issue for me is bt.
Sent from my ME173X using XDA Free mobile app
Click to expand...
Click to collapse
I have to go into the Bluetooth settings and manually connect my headset whenever I turn it on. I can see it there but it never connects until I select it.
stevet86 said:
I have to go into the Bluetooth settings and manually connect my headset whenever I turn it on. I can see it there but it never connects until I select it.
Click to expand...
Click to collapse
Hmm. Mine always connects, just shuts off randomly. Let me know if it helps. I see the next nightly is quite extensive but so far no BT changes. I plan on trying it though
Fyi, I'm going to go into rehab soon bc I'm having nightlies withdrawal. ???