my xperia L got softbricked because i think i flashed a wrong kernel.it vibrates but doesn't turn on,using flashtool i was able to boot into fastboot mode and flashmode ,but i can't even relock bootloader ...I DON'T NO WHAT TO DO NEXT
PLEASE DO HELP
THANKS IN ADVANCE
Try to flash the stock ftf, or flash a kernel with flashtool. (extract a boot.img from a cm rom, than flash it)
Tidzsi said:
Try to flash the stock ftf, or flash a kernel with flashtool. (extract a boot.img from a cm rom, than flash it)
Click to expand...
Click to collapse
Don't panic stay calm, this isn't a big problem recently i also flashed the wrong kernel in my case the phone rebooted when the First Boot screen comes up, if your phone can be connected in fastboot and Flashmode that's good news and you dont have to worry. I will Guide you step by step..
Method 1- (FASTBOOT)
If you have a nandroid backup in your SD Card then connect your phone in fastboot mode and flash boot.img by typing the command ->Fastboot flash boot boot.img in the command prompt, after this you will be able to access the recovery on the phone and then you can just RESTORE your nandroid backup.
Watch this video in case you want to use the fastboot method-
https://www.youtube.com/watch?v=I6lNwBJGvNc
This will show you how to flash fresh CWM and kernel, the download links are in video's description.
Method 2- (Flashtool)
If you don't want to use method 1 then you can use this method cuz its very easy .
1--> Get some info about how to use flashtool and if you already know how to use it then its good
2--> Download your phone's correct Stock FTF.
3--> Connect your phone in flashmode.
4--> and then flash the stock FTF
5--> Done. it will take a minute or two to boot the phone for the first time.
If you still have doubts and queries about flashtool then refer to Guides and Tutorials on using Flashtool . Don't worry its just a soft brick your phone will be okay.
Best of luck!
Related
I am in Bootloop after unlocking bootloader?? I try to use flashtool to recover but When i cant connect to FlashMode @@ how ???
flash ftf
No panic plz
panhavad said:
I am in Bootloop after unlocking bootloader?? I try to use flashtool to recover but When i cant connect to FlashMode @@ how ???
Click to expand...
Click to collapse
WHY DID YOU USE THOSE ****TY PROGRAMS INSTEAD OF THE NORMAL FASTBOOT?????
Anyway so download an .ftf for your M2 type (you can even install the CM 11 rom if you want to have the CWM recovery)
Download this rar whit fastboot and tools -https://mega.co.nz/#!9oAWgSSK!4IXHU7cuNvRF7PUQHMYTx8tN5a8FSdw81aEqJWjL1mw-
Unzip the pack on your desktop
Drag & drop your .ftf inside the fastboot folder
Open cmd in fastboot folder
Connect your device ( in fastboot mode )
Tipe fastboot devices to see if it is connected properly
Now , im not responsable if you brick your device, tipe "fastboot flash firmware (name of file).ftf"
Wait until it's done
Unplug your device and boot it up :good:
Hello Guys.
I have a little problem after succesfull unlocking bootloader and adding a CWM Link. My d2303 has a bootloop , ill try to flash it with flashtool but when i go in flashmode and choose the file phone will go ON without using a power button... Still i can enter in CWM but i cant install a zip with stock 4.4.4 (I dont try older versions yet)
So i cant flash it and now i need help .
@edit: After download stock 4.3 recovery will see rom but cannot flash it cause of error "failed to load keys installation aborted" . Any ideas how to fix it?.
really sorry for my bad eng but i learn it at home alone
You can try to flash stock kernel with Flashtool but using fastboot instead of flashmode. You can try entering fastboot holding Vol + and connecting the phone to PC.
nlooooo said:
You can try to flash stock kernel with Flashtool but using fastboot instead of flashmode. You can try entering fastboot holding Vol + and connecting the phone to PC.
Click to expand...
Click to collapse
ill try it but when i choose "select system to flash" FT see just *.sin / *.img / *.ext4 and yaffs2 .
@edit: aw my bad i didnt read properly, will try with stock kernel.
@edit2: now bootlooping 1 sec after a home screen.
@edit3: Problem solved, just need to relock bootloader then flash in FT... i dont know the difference but work...
If you relocked bootloader now you can flash it using Sony PS Companion to get a full stock OS with right customization and start from scratch.
nlooooo said:
If you relocked bootloader now you can flash it using Sony PS Companion to get a full stock OS with right customization and start from scratch.
Click to expand...
Click to collapse
No i cant even if i use "repair" option. Companion give a info i have a latest compilation. Flashtoll do the job after relock in 1st hit.
My mistake, my bad mistake, I was trying to gain root and to flash a CM rom, but after first successfull flash of a boot.img with fastboot, I have tried to flash the rom with TWRP but my device was recognized as a wrong model, so I couldn't to flash the rom (in settings it was recognized correctly as D6603), so I decided to flash another boot.img, but it was for Lollipop instead Kitkat and now I can't put my device in flash mode or in fastboot mode to flash the correct boot.img or a fw, turning on the Z3 the display lights on and seems to have a bootloop, I see the splashscreen, but nothing else.
Is there a way to recover it?
Thanks in advance.
Hold volume down and connect USB will take u to fastboot. Tried to flash a FTF yet?
Sindroid said:
Hold volume down and connect USB will take u to fastboot. Tried to flash a FTF yet?
Click to expand...
Click to collapse
Yes, I've tried with volume down (flash mode) and volume up (fastboot mode), nothing seems to works.....
EDIT: wow! now I was able to reboot it into recovery, but I don't know if it's useful, it's the Cyanogen recovery.
EDIT2: Yeaaahhh, from recovery I could reboot it into fastboot mode and to flash the correct boot.img, the device is recovered, I've tried one hour before, sorry to bother the community.
Hi,
this is what happened.
I unlocked the bootloader of my z5, afterwards I flashed the twrp recovery.
After that I rebooted my phone and it only hangs on the kernel screen, it wont enter recovery neither boot into system.
Then I tried to flash the stock rom with flashtool but it wont go into flashmode either.
Tried it even with fastboot mode and nothing.
Any suggestions?
kristijan15 said:
Hi,
this is what happened.
I unlocked the bootloader of my z5, afterwards I flashed the twrp recovery.
After that I rebooted my phone and it only hangs on the kernel screen, it wont enter recovery neither boot into system.
Then I tried to flash the stock rom with flashtool but it wont go into flashmode either.
Tried it even with fastboot mode and nothing.
Any suggestions?
Click to expand...
Click to collapse
After unlocking the bootloader you should have flashed a custom kernel like Androplus V36 first before flashing the recovery img.
I had a similar case I think but with my old z1 compact. When you connect your phone via usb, is anything happen? What color is the led?
What I did was just make sure fastboot and flashmode drivers are installed. Kept plugging the phone while pressing volume button up and down and keep playing with it.
Make sure battery is fully charged and maybe try a different cable if you have another one.
If you succeed and manage to get into flashmode then reflash your ftf file and then let it boot.
If all is good and well, then download androplus kernel for example and extract the boot.img
http://forum.xda-developers.com/xperia-z5/development/kernel-andropluskernel-v1-t3246100
Install minimal adb and fastboot and connect into fastboot mode
Place the boot.img file extracted from androplus kernel in your minimal adb folder and type fastboot flash boot boot.img
if it says okay two times u can then flash twrp recovery by using the command fastboot flash recovery twrp.img where twrp.img replaced by the name of your recovery img file.
Sorry if im not clear enough, but I hope this helps you.
Well, the led only flashes shortly in red, after that comes the kernel bootlogo and nothing else.
When the bootlogo shows up the is not flashing in any color.
When I try to connect it to pc it wont recognize it, and the phone starts booting and hangs on the kernel bootlogo again.
kristijan15 said:
Well, the led only flashes shortly in red, after that comes the kernel bootlogo and nothing else.
When the bootlogo shows up the is not flashing in any color.
When I try to connect it to pc it wont recognize it, and the phone starts booting and hangs on the kernel bootlogo again.
Click to expand...
Click to collapse
Have you tried connecting and opening xperia companion to see if you can do a software repair there?
Or else, I would just leave it connected to a charger for the night and try again, and just keep playing with the volume up and down button while connecting it.
Also you can try installing your drivers another time, and try an older or newer version of Flashtool.... this has helped a couple of times too for me in the past so thats another thing you could try.
Good luckk:good:
Well at this moment my pc just decided to recognize the device so I am flashing now the stock firmware ATM
Thanks for the assistance
kristijan15 said:
Well at this moment my pc just decided to recognize the device so I am flashing now the stock firmware ATM
Thanks for the assistance
Click to expand...
Click to collapse
Good to hear you revived your phone
Remember if you wanna flash custom kernel:
First unlock bootloader if it isnt ofcourse
Via minimal adb and fastboot flash boot.img from a custom kernel of your choice, I would recommend androplus kernel v36.
Next you could flash a twrp recovery.img via fastboot right after flashing the kernel, but I would first boot the system for a time to see if it boots okay.
Good luck
koekoek91 said:
Good to hear you revived your phone
Remember if you wanna flash custom kernel:
First unlock bootloader if it isnt ofcourse
Via minimal adb and fastboot flash boot.img from a custom kernel of your choice, I would recommend androplus kernel v36.
Next you could flash a twrp recovery.img via fastboot right after flashing the kernel, but I would first boot the system for a time to see if it boots okay.
Good luck
Click to expand...
Click to collapse
Did it already now everything is ticking like a swiss watch
Awesome have fun[emoji14]
Sent from my E6653 using XDA-Developers mobile app
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Files You Need To Download:
1:Miracle Box Tool-https://mega.nz/#!lVsQGSaC!6TTJopMyntMQA0IKYdC_5BlsxIjV_Ibhx2qWL_ZqDyI
2:Stock Rom- https://mega.nz/#F!ncMFUaaa!0fVNwJ_Io0EMFv8YLjBZlQ [Select Download As Zip]
3:https://androidmtk.com/install-android-cdc-driver-manually [Install Drivers Using This Guide]
Click to expand...
Click to collapse
Steps To Flash Stock Rom:
1:Install Miracle Box And Drivers
2:Launch Miracle Box
3: Open Mtk Tab
4:Click on Services
5:Select Write From The Available Options
6:Select 8th Boot From Boot Options
7:In Second Options,Select Oppo Realme 1
8:Check Skip Preloader File
9:Hit Start
10:Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
11:Remove Cable And Press Power+VOLUME Up For 15 Seconds
You Have Unbricked Your Device
Click to expand...
Click to collapse
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
1st link miracle box is not working plz correct it bro
can you share download links from other providers? mega asks for premium account.
thank you.
Didn't work for me
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
After flashing twrp recovery when I booted my device, a software update popped up and it automatically updated over night and my device hard bricked. I tried everything but couldn't fix it. My pc is not even recognising my phone so can't follow your steps. Any suggestion or help to fix my device will be appreciated.
same mine bro,
rom version was a31 and after installed twrp, my device hard bricked. i couldnt solve yet, waiting a newer version of miracle box or etc.
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
i dumped the stock rom bro @besttipsYT Not Shobith
this method is not working at this time...when i trying to flash by this method only show.......phone connected......downloding boot8....then disconnect my phone ..&reboot
Please don't flash custom recovery (here twrp) without proper knowledge or just sake of modding device. The builds and methods are not always working and may end up bricking your device.
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Alen012 said:
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Click to expand...
Click to collapse
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
StripsOfTatti said:
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Click to expand...
Click to collapse
Which recovery are you in? Is it Stock or Custom?
If u have stock first wipe data and then flash boot.img or ozip file (stock ROM).
If u have custom recovery then you need to flash stock recovery + stock ROM.
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Simba Gaara said:
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Click to expand...
Click to collapse
If recovery and fastboot are inaccessible means you need to visit service center.
When trying to connect realme 1 to miracle it showing usb device not connected, how to solve this? Drivers are installed
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
AwesomeVk47 said:
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
Click to expand...
Click to collapse
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Naveen56 said:
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Click to expand...
Click to collapse
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
AwesomeVk47 said:
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
Click to expand...
Click to collapse
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Code:
fastboot oem reboot-recovery
Install ozip.
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Is that link for realme 1 stock recovery?.......it would be great help if you could tell me how to obtain it....just for future use
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Will this link work for stock rom file?
Link1
https://www.realme.com/in/support/software-update
Link2
https://www.getdroidtips.com/oppo-realme-1-stock-firmware-collections/
Which one of these should I use?