hi guys just now my phone was about to dead battery i just put charger it restart and factory mode pop up its still struck at a little android man with the message Downloading......... Do not turn off target. help to if any one know the good solution for this
Hi,
Remove your battery for few minutes, put back and try to start your device.
Good luck
Related
Hi everyone.
I am very confused on my Htc Hd2. Yesteday I was trying to update the rom on my phone and it succeeded.. but when I tried to connect it to my pc it restarted and just startet vibrating constantly. Now everytime I put the battery in the phone, it just starts to vibrate constantly untill I take the battery out again. I can't do anything. it won't boot, won't enter bootloader, nothing! Is the phone dead or what? Could it be the battery?
Please help me!
Best regards
You ever get an answer to this? I just tried to flash the stock rom via the RUU to reset the phone state, and it failed and now I keep getting this also.
Anyone know?
I'm no expert on the HD2, but can you power it up with just the USB cable and no battery?
Sent from my HTC Liberty S using a finger
hi,
i have the same issue.
a friend of mine gave me a HD2 today so i could play around with it.
I have done anything to it but as soon as i put the battery in.... it vibrates nonstop.
sometimes it flashes the led then vibrates nonstop.
any ideas ? is it bricked ?
i tried to start it with no battery but nothing, no.
please help guys
cheers
did u manage to resolve it guys? cause i get the same thing
i wonder if there's any chance by pin method,,, like at the toshiba tg01
anyone? pls
I have an idea this happened to my HD 2 once it turns out the problem was one if the pins which connects the battery was sticking out so i just pushed it back and it resolved the problem if that doesn't work try a hard resetto do this hold both the volume up and down buttons and hold the power button if this doesn't work then I'm afraid there's nothing i can do to help.
Best wishes
Kyle
anythin i try..hard reset.. doesnt work..it vibrates continously
so i called a service totay.. il have to unbrick it with jtag.. good for me it only costs 20 E ..
me too have same problem,if anyone know how to solve it please help.........
My Dad brought the phone from Alibaba and after 3 months it was boot looping so i tried to fix it for him. When i got into the recovery mode i factory reset it and then it was flash nand or something like that. I stopped it half way through the process and after that the was dead. Not connecting to pc not turning on no lights to indicate signs of life. The phone is getting power because when it is left charging the back where the camera is located feels warm. If anyone knows a solution or is the phone unrecoverable please tell me
Hi there,
You know maybe you wont find any help because that word "clone", right?
Stand by
Uchihas12 said:
My Dad brought the phone from Alibaba and after 3 months it was boot looping so i tried to fix it for him. When i got into the recovery mode i factory reset it and then it was flash nand or something like that. I stopped it half way through the process and after that the was dead. Not connecting to pc not turning on no lights to indicate signs of life. The phone is getting power because when it is left charging the back where the camera is located feels warm. If anyone knows a solution or is the phone unrecoverable please tell me
Click to expand...
Click to collapse
Hi, as mentioned it may be difficult to find support for knock-offs. I did find this thread http://forum.xda-developers.com/showthread.php?t=2433709 where the last post the member gave some suggestions of places to look.
You can also try to post your question in the international S4 Q&A section here: http://forum.xda-developers.com/galaxy-s4/help
Best of luck to you.
I finally got the right digitizer for my LG-D802, and when I turn it on it will either go through the boot process, and then show 0% battery and tell me it's turning off because of the battery, or do a boot process with what looks like a buffering logo animation followed by a regular speed animation,led light flashes green and blue and then back to the 0% battery and turn off. If connect it with charger turns on by it self and the boot logo runs like slow motion,after some time reboot and does bootloop.
I can get it to firmware download mode, and cannot get it to factory reset. I also cannot get my win 7 to see the phone after trying tons of different drivers.
Please help
trospe1988 said:
I finally got the right digitizer for my LG-D802, and when I turn it on it will either go through the boot process, and then show 0% battery and tell me it's turning off because of the battery, or do a boot process with what looks like a buffering logo animation followed by a regular speed animation and then back to the 0% battery and turn off. If connect it with charger turns on by it self and the boot logo runs like slow motion,after some time reboot and does bootloop.
I can get it to firmware download mode, and cannot get it to factory reset. I also cannot get my win 7 to see the phone after trying tons of different drivers.
Please help
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble but fortunately there is an XDA area dedicated to the LG G2 at http://forum.xda-developers.com/lg-g2 which would be a good starting place.. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/lg-g2/help where the experts familiar with your device will be best able to guide you.
Good luck!
EDIT: Member has now posted in the suggested area. Thread closed.
I have a Lg G Pro 2. Few days back it got bricked by its own( a crazy fact). That time it was showing QHSUSB_BULK. I figured it out as 9006. Took the phone to a local service shop. Today I got it back and found that nothing had happened to the phone, expect worse. Now it is not detected by PC, only green light blinks for some time if tried to power on. And then everything is black and cold as death.
I think it have been flashed with wrong ROM. Anybody here can guide me with the test points of Lg G Pro 2 (D838 F350) ? So that I can force it to QHSUSB_BULK ? Or any step by step advice to get it up ?
I am in real need of assistance, and thanks in advance for any sort of help. Best Regards.
I would like to mention that the phone indicator blinks for sometime if I try to power it on, as it does on boot, but nothing else is there. No recognition by PC, no presence in Device Manager. Blinks for sometime, stops, again starts blinking... and this goes on at regular short intervals. The area around the camera gets warm after sometime. Everything loops till I pull off battery.
Now, am I missing something ? Is the problem not as deadly as I am thinking ? Is it soft bricked ?
indra_neel said:
I have a Lg G Pro 2. Few days back it got bricked by its own( a crazy fact). That time it was showing QHSUSB_BULK. I figured it out as 9006. Took the phone to a local service shop. Today I got it back and found that nothing had happened to the phone, expect worse. Now it is not detected by PC, only green light blinks for some time if tried to power on. And then everything is black and cold as death.
I think it have been flashed with wrong ROM. Anybody here can guide me with the test points of Lg G Pro 2 (D838 F350) ? So that I can force it to QHSUSB_BULK ? Or any step by step advice to get it up ?
I am in real need of assistance, and thanks in advance for any sort of help. Best Regards.
Click to expand...
Click to collapse
Greetings and welcome to assist. Please don't make duplicate threads as it just clogs up the forums, I can see you have found the correct place to ask your question here
https://forum.xda-developers.com/lg-g-pro-2/help/g-pro-2-wrong-flashing-pls-help-t3546424
so I will close this one up and this one
https://forum.xda-developers.com/android/help/lg-g-pro-2-d838-help-t3546379
as well
Regards
Sawdoctor
Good evening
So the phone freezes right away in the "Samsung Model screen" i can't get inside the fast boot to do a factory reset and when i connect a charger or anything he frezes in the logo that shows when the battery is charging, also when i remove the battery from the phone but he is connected to a charger he keeps showing whatever was on the screen when it froze even without the battery, help pls
No one ? :'(