Hey Guys,
Tried installing a custom rom on my LG Optimus G but stucked on LG logo on boot after installation. Now I try flashing the original kdz but when I lunch de flahing process from download mode, my phone turns on into recovery mode on its on. Can somebody help me? Is there another tool to flash kdz??
When you tried flashing the custom rom or kdz did you do a factory reset first and wipe everything except internal sd phone or tablet storage first before you flashed the files ? is the kdz a firmware zip folder ?
ryan012 said:
When you tried flashing the custom rom or kdz did you do a factory reset first and wipe everything except internal sd phone or tablet storage first before you flashed the files ? is the kdz a firmware zip folder ?
Click to expand...
Click to collapse
No, did that but my problem is solved, My problem is solved. I was able to flash using LG Flash Tool 2014.
Which procedure should I follow exactly not to stuck again. If I factory reset the Rom zip will be whiped. My phone takes no external SD.
Check Ur downloaded ROM MCDev again. That its OK and didn't corrupt..
On which Stock firmware u were before installing MCdev? You should be on 30C
Do you have a custom recovery ?
when flashing roms you need to wipe cache, data, and system before you flash recovery. It doesn't delete internal phone storage, files unless you choose to select it. This is how I do it in a custom recovery .twrp works good for the lg g2
The ROM is OK. I'm on 20G
Sent from my LG-F180K using XDA Free mobile app
I've got CWM. Are you talking of format /system from Mount storage option?? Becayse Factory reset last cleared my USB memory
Sent from my LG-F180K using XDA Free mobile app
zachadinho said:
I've got CWM. Are you talking of format /system from Mount storage option?? Becayse Factory reset last cleared my USB memory
Sent from my LG-F180K using XDA Free mobile app
Click to expand...
Click to collapse
from where u got the rom..
U should get it from
http://besttopics.net/link/187488_q-amp-a-kk-port-stable-mcdev-g3-port-e975-f180-all
Q/A thread
http://besttopics.net/link/187488_q-amp-a-kk-port-stable-mcdev-g3-port-e975-f180-all
Murshad007 said:
from where u got the rom..
U should get it from
http://besttopics.net/link/187488_q-amp-a-kk-port-stable-mcdev-g3-port-e975-f180-all
Q/A thread
http://besttopics.net/link/187488_q-amp-a-kk-port-stable-mcdev-g3-port-e975-f180-all
Click to expand...
Click to collapse
Its from there I downloaded the ROM. Tried flashing it following your directions bt still stuck on LG logo.
I factory reset
clear cache
clear dalvik cache
flash the rom
factory reset again
clear dalvik cache again
then reboot. But problem persist
zachadinho said:
I've got CWM. Are you talking of format /system from Mount storage option?? Becayse Factory reset last cleared my USB memory
Sent from my LG-F180K using XDA Free mobile app
Click to expand...
Click to collapse
what usb memory are you talking about ? Are you using a usb flash drive or something else ? If your formatting everything unmount any external usb flash drive or memory card you are using.
zachadinho said:
Its from there I downloaded the ROM. Tried flashing it following your directions bt still stuck on LG logo.
I factory reset
clear cache
clear dalvik cache
flash the rom
factory reset again
clear dalvik cache again
then reboot. But problem persist
Click to expand...
Click to collapse
I don't think you need to factory reset again after you flashed the rom if you did the things before it. Clear the cache and dalvik cache before starting up your device.
is data being wiped during factory reset ? You should
Select wipe data/factory reset and confirm
Select wipe cache partition and confirm
Select advanced - wipe dalvik cache and confirm
Select install zip from SD card
Select from internal SD card or wherever you placed it.
Select the ROM file and confirm.
then start the device. If you have the right android version and everything else you can wipe cache and dalvik cache then try Fix Permissions after flashing rom before you try to start up again.
Does the rom need you to be on a different android version or flash a kernel for it ?
zachadinho said:
Its from there I downloaded the ROM. Tried flashing it following your directions bt still stuck on LG logo.
I factory reset
clear cache
clear dalvik cache
flash the rom
factory reset again
clear dalvik cache again
then reboot. But problem persist
Click to expand...
Click to collapse
But U have to Format Data and System Partition Also before flashing this ROM.
And U aren't on Stock Kitkat. May be that's the reason. Did U select ur baseband F180K during installation? And did u installed Custom Loki CWM recovery as mentioned in thread?
Everything is alright now. The phone doesnnt stuck on LG logo nomore. The problem was I was not on stock KitKat. I had to upgradde to stock 4.4.2 (30C) before flashing. Thanks to y'all
zachadinho said:
Everything is alright now. The phone doesnnt stuck on LG logo nomore. The problem was I was not on stock KitKat. I had to upgradde to stock 4.4.2 (30C) before flashing. Thanks to y'all
Click to expand...
Click to collapse
Great. Push the Thanks Button...
Related
I have a problem, I am running Froyo 2.2.2 and wanted to upgrade to CM10.1, I installed the recovery via rom manager and rebooted in recovery mode after that I wipe the data/ factory , wipe cache partition and wipe the dalvik cache but when I tried to locate the CM10 zip I couldn't find it. I rebooted my phone without installing any thing but after reboot my phone is showing 0.00B phone memory available and I am unable to install any software. Please help me to resolve the issue.
dashing_guy said:
I have a problem, I am running Froyo 2.2.2 and wanted to upgrade to CM10.1, I installed the recovery via rom manager and rebooted in recovery mode after that I wipe the data/ factory , wipe cache partition and wipe the dalvik cache but when I tried to locate the CM10 zip I couldn't find it. I rebooted my phone without installing any thing but after reboot my phone is showing 0.00B phone memory available and I am unable to install any software. Please help me to resolve the issue.
Click to expand...
Click to collapse
Reflash your Froyo Kdz
I wanted to update from Android 2.3.5 to 4. I rooted my phone properly, and that went fine with Superuser elite. Because of upgrading, I installed CWM 5.0.2.7 via Odin. In the background CWM shows errors:
Code:
Cannot mount /cache!
And errors like that. I formatted microSD card, inserted it back, formatted it. The errors are still here. Because of the left cache folder, I couldn't install Android 4. I followed all guides on Internet, the problem is still here. I thought newer version of CWM will solve it, and I downloaded version 6 and flashed it through Odin(WHY?:crying. Now I cannot go to download mode or CWM, I am stuck at SAMSUNG logo when I boot the phone. Any help will be very appreciated. :highfive: The last thing I would do is to go to shop and request a new one, because my warranty expired in February. It's cost is 210 euro. This is the second time I almost bricked my device.
I'm trying this.
http://forums.droidbeans.com/tutorials/fastboot-to-unbrick-your-device/
EDIT: ADB cannot see my device! I also tried Heimdall, but with no luck. This means I am screwed? Hope not!!
AleksaSavic said:
I wanted to update from Android 2.3.5 to 4. I rooted my phone properly, and that went fine with Superuser elite. Because of upgrading, I installed CWM 5.0.2.7 via Odin. In the background CWM shows errors:
Code:
Cannot mount /cache!
And errors like that. I formatted microSD card, inserted it back, formatted it. The errors are still here. Because of the left cache folder, I couldn't install Android 4. I followed all guides on Internet, the problem is still here. I thought newer version of CWM will solve it, and I downloaded version 6 and flashed it through Odin(WHY?:crying. Now I cannot go to download mode or CWM, I am stuck at SAMSUNG logo when I boot the phone. Any help will be very appreciated. :highfive: The last thing I would do is to go to shop and request a new one, because my warranty expired in February. It's cost is 210 euro. This is the second time I almost lost my device.
Click to expand...
Click to collapse
cwm doesn't support RFS . so you should format cache and data partition before installing custom ROMs.
goto recovery and do this:
wipe data/reset
advanced-> wipe dalvik cache
install zip from sdcard -> choose ROM file
wipe data/reset
advanced-> wipe dalvik cache
reboot
ehsan-black said:
cwm doesn't support RFS . so you should format cache and data partition before installing custom ROMs.
goto recovery and do this:
wipe data/reset
advanced-> wipe dalvik cache
install zip from sdcard -> choose ROM file
wipe data/reset
advanced-> wipe dalvik cache
reboot
Click to expand...
Click to collapse
But, the real problem is: I cannot go to CWM or download mode! Also, I cannot format cache via CWM because of the errors in first post.
AleksaSavic said:
But, the real problem is: I cannot go to CWM or download mode! Also, I cannot format cache via CWM because of the errors in first post.
Click to expand...
Click to collapse
try usb jig! google it .
when you connect usb jig to your phone an alternative download mode start and you can flash a stock rom via odin!
i hope this works for you.
ehsan-black said:
try usb jig! google it .
when you connect usb jig to your phone an alternative download mode start and you can flash a stock rom via odin!
i hope this works for you.
Click to expand...
Click to collapse
OK. I though to do it this way:
1. Buy USB jig.
2. Go to download mode.
3. Flash TWRP with Odin.
4. Install Android 2.3.6.
5. Flash CWM via Odin.
6. Fix cache problem somehow.
7. Install Android 4! Yay!
For the step 6, how can I fix the cache error?
AleksaSavic said:
OK. I though to do it this way:
1. Buy USB jig.
2. Go to download mode.
3. Flash TWRP with Odin.
4. Install Android 2.3.6.
5. Flash CWM via Odin.
6. Fix cache problem somehow.
7. Install Android 4! Yay!
For the step 6, how can I fix the cache error?
Click to expand...
Click to collapse
NOOOO! you should install TWRP with custom recovery, NOT Odin! don't do same mistake again.
this is the proccess:
1- buy usb jig and connect it to your phone.
2- flash Stock Firmware(it must be 2.3.x) with odin! (you can download stock firmwares from samfirmware.com)
3- flash this with odin:
http://forum.xda-developers.com/showthread.php?t=1339640
it's most stable recovery that we have!
4-wipe data/reset
advanced-> wipe dalvik cache
5-install zip from sdcard -> choose ROM file
6-wipe data/reset
advanced-> wipe dalvik cache
7-reboot
and now you have android 4! yeah
Stock Roms have RFS partition type and our custom recovery doesn't support RFS so that mount problem appears. but you can format partitions again and convert partition to Ext4. just do step 4 .
ehsan-black said:
NOOOO! you should install TWRP with custom recovery, NOT Odin! don't do same mistake again.
this is the proccess:
1- buy usb jig and connect it to your phone.
2- flash Stock Firmware(it must be 2.3.x) with odin! (you can download stock firmwares from samfirmware.com)
3- flash this with odin:
http://forum.xda-developers.com/showthread.php?t=1339640
it's most stable recovery that we have!
4-wipe data/reset
advanced-> wipe dalvik cache
5-install zip from sdcard -> choose ROM file
6-wipe data/reset
advanced-> wipe dalvik cache
7-reboot
and now you have android 4! yeah
Stock Roms have RFS partition type and our custom recovery doesn't support RFS so that mount problem appears. but you can format partitions again and convert partition to Ext4. just do step 4 .
Click to expand...
Click to collapse
CWM can convert to ext4? I thought that only TWRP can do that.
AleksaSavic said:
CWM can convert to ext4? I know that only TWRP can do that.
Click to expand...
Click to collapse
yes it can.it's like formating your Usb pen drive . just go to cwm5 and wipe data/reset and wipe dalvik cache and install android 4 zip file.
ehsan-black said:
try usb jig! google it .
when you connect usb jig to your phone an alternative download mode start and you can flash a stock rom via odin!
i hope this works for you.
Click to expand...
Click to collapse
Will this one work on Galaxy Fit?
http://goo.gl/Uyu4Sm
EDIT: I have Android 2.3.6. How can I reset the number of flashes?
AleksaSavic said:
Will this one work on Galaxy Fit?
http://goo.gl/Uyu4Sm
EDIT: I have Android 2.3.6. How can I reset the number of flashes?
Click to expand...
Click to collapse
yes it should work. it's just a simple resistor. you can make your own jig:
http://forum.xda-developers.com/showthread.php?t=1604707
i made one and it worked for me . i hope work for you too.
i heard that samsung changed bootloader so you can't reset number of flashes any more. you said your warranty expired in February! so why do you want to do that??
ehsan-black said:
yes it should work. it's just a simple resistor. you can make your own jig:
http://forum.xda-developers.com/showthread.php?t=1604707
i made one and it worked for me . i hope work for you too.
i heard that samsung changed bootloader so you can't reset number of flashes any more. you said your warranty expired in February! so why do you want to do that??
Click to expand...
Click to collapse
Thanks. I will buy one as soon as possible. For the bootloader, I am just curios. Thank you for great answers!
I solved it this way. I went to service and they somehow installed Android 2.3.6. Now I partitioned my 8 GB SD card via CWM and currently I am trying PAC-man ROM(S) from this forum. I will post what will happen.
Still no luck.
Hi,
First, I followed the instructions in this guide: http://forum.xda-developers.com/showthread.php?t=2507905
I installed the CWM recovery and then flashed the CM11-20131228 nightly and then the recommended Google Apps that are linked at their wiki: http://wiki.cyanogenmod.org/w/Gapps#Downloads (I took the 20131208 ones)
Now my phone is stuck in the boot screen with the circle spinning around the cyanogenmod logo (I can boot the bootloader and recovery but when I try to boot CM11 it’s stuck) and I dont know how to get to a working cm11 rom. The guide said that the first boot with a new rom takes longer than usual because the phone rebuilds caches and so on but I think it should not take more than half an hour...
What I already tried is:
- Wiping the chaches with the CWM recovery an then booting cm11 -> still just the arrow spinning around the logo
- Wiping the caches with recovery and then re-flashing the same zip without flashing the google apps afterwards -> did not work
- Wiping and then pushing the newer cm11 nightly via adb so that I could try this one -> recovery did not find the pushed zip on my scdard
- Wiping, then tried to install the new nightly via adb sideload -> cmd prompt said it was send properly and as far as I can say the phone installed it but I was still stuck on that bootscreen ...
- I even restored to the stock 4.4.2 factory image and then flashed the cwm recovery, than wiped caches and then installed the latest cm11 nightly an then the google apps but I still can not get past the boot animation
What am I doing wrong and how can I get past the boot screen?
You talk about wiping caches but are you wiping data too?
Oh, yes. I just didnt mention it. I always did the three steps from the guide:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
BopItXtremeII said:
Oh, yes. I just didnt mention it. I always did the three steps from the guide:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
Click to expand...
Click to collapse
So you get the bootloop only when trying to install CM and when you flashed the factory image, it booted up fine?
Sent from my Nexus 5
Exactly.
I install the factory image with method 1 from this guide: http://forum.xda-developers.com/showthread.php?t=2513701 and then flash CWM recovery to install CM (factory reset + wipe cache + wipe dalvik cache + install cm-zip + install gapps-zip) and then there is the bootloop.
BopItXtremeII said:
Exactly.
I install the factory image with method 1 from this guide: http://forum.xda-developers.com/showthread.php?t=2513701 and then flash CWM recovery to install CM (factory reset + wipe cache + wipe dalvik cache + install cm-zip + install gapps-zip) and then there is the bootloop.
Click to expand...
Click to collapse
Did you check the md5 of the cm download?
BopItXtremeII said:
Exactly.
I install the factory image with method 1 from this guide: http://forum.xda-developers.com/showthread.php?t=2513701 and then flash CWM recovery to install CM (factory reset + wipe cache + wipe dalvik cache + install cm-zip + install gapps-zip) and then there is the bootloop.
Click to expand...
Click to collapse
Sometimes formatting all of the partitions (except the sd card) works.
Sent from my Nexus 5
jd1639 said:
Did you check the md5 of the cm download?
Click to expand...
Click to collapse
The md5 sum is the same as on the download page.
PhilipTD said:
Sometimes formatting all of the partitions (except the sd card) works.
Sent from my Nexus 5
Click to expand...
Click to collapse
Which partitions? boot, cache, recovery and system? Sorry, I'm new to android... And what do I have to install on these partitions after erasing them?
BopItXtremeII said:
The md5 sum is the same as on the download page.
Which partitions? boot, cache, recovery and system? Sorry, I'm new to android... And what do I have to install on these partitions after erasing them?
Click to expand...
Click to collapse
Flash the boot.img and reboot
Then see
Sent from my LT26i using xda premium
BopItXtremeII said:
The md5 sum is the same as on the download page.
Which partitions? boot, cache, recovery and system? Sorry, I'm new to android... And what do I have to install on these partitions after erasing them?
Click to expand...
Click to collapse
Wipe system, data, dalvik, and cache
jd1639 said:
Wipe system, data, dalvik, and cache
Click to expand...
Click to collapse
^^^^^^Precisely^^^^^^
Sent from my Nexus 5
I got another problem now ... The last thing I did was flashing the stock rom. Now I want to flash the latest CM nightly (20131229) but fastboot does not let me install cwm recovery and says
Code:
FAILED <remote: partition table doesn't exist>
I flashed the whole stock rom again but the error still occurs... I have to wipe the partitions after I installed CM, right?
BopItXtremeII said:
I got another problem now ... The last thing I did was flashing the stock rom. Now I want to flash the latest CM nightly (20131229) but fastboot does not let me install cwm recovery and says
Code:
FAILED <remote: partition table doesn't exist>
I flashed the whole stock rom again but the error still occurs... I have to wipe the partitions after I installed CM, right?
Click to expand...
Click to collapse
Are you using
fastboot flash recovery recovery.img
Where recovery.img is the cwm image file
jd1639 said:
Are you using
fastboot flash recovery recovery.img
Where recovery.img is the cwm image file
Click to expand...
Click to collapse
I use this command. But I missed a c in recovery so fastboot did not find the partition named "reovery" >_< Ok, CWM is installed. Now I have to install CM11 an then wipe the 4 partitions you mentioned with cwm? Wheres the option to wipe system, I just find the other 3.
BopItXtremeII said:
I use this command. But I missed a c in recovery so fastboot did not find the partition named "reovery" >_< Ok, CWM is installed. Now I have to install CM11 an then wipe the 4 partitions you mentioned with cwm? Wheres the option to wipe system, I just find the other 3.
Click to expand...
Click to collapse
I'm cwm just do the other 3
So I installed CM + Gapps and then wiped data, cache and dalvik cache with CWM. Now Im waiting for 8 minutes for the bootscreen to go away, but think it didnt work. By the way, if I wipe the system partition, I delete CM, dont I? I dont understand how that will help booting into CM.
BopItXtremeII said:
So I installed CM + Gapps and then wiped data, cache and dalvik cache with CWM. Now Im waiting for 8 minutes for the bootscreen to go away, but think it didnt work. By the way, if I wipe the system partition, I delete CM, dont I? I dont understand how that will help booting into CM.
Click to expand...
Click to collapse
Wipe before the install.
So,
1 Put rom zip on phone internal storage
2 Wipe partitions except internal storage
3 Flash rom
4 Flash GApps
5 Reboot
Sent from my Nexus 5
BopItXtremeII said:
So I installed CM + Gapps and then wiped data, cache and dalvik cache with CWM. Now Im waiting for 8 minutes for the bootscreen to go away, but think it didnt work. By the way, if I wipe the system partition, I delete CM, dont I? I dont understand how that will help booting into CM.
Click to expand...
Click to collapse
8 minutes is too long. You have some other problem. Do any other roms work? Wiping system in twrp does not wipe the internal sd card. That's why you didn't find it in cwm.
PhilipTD said:
Wipe before the install.
So,
1 Put rom zip on phone internal storage
2 Wipe partitions except internal storage
3 Flash rom
4 Flash GApps
5 Reboot
Sent from my Nexus 5
Click to expand...
Click to collapse
Thats what I did.
jd1639 said:
8 minutes is too long. You have some other problem. Do any other roms work? Wiping system in twrp does not wipe the internal sd card. That's why you didn't find it in cwm.
Click to expand...
Click to collapse
I will try the AOKP nightly and post the results. Is it okay to just wipe data, cache and dalvik cache before installing the aokp zip or is it better to flash the stock rom before flashing aokp?
No need to flash stock, just do the wipes
So uhh, I unlocked the bootloader.
Flashed CWM Recovery.
and now I was on the point to install a rom..
factory wipe + cache wipe
format system
flash rom (tried cwm and Beanstalk)
flash gapps ("Gapps_Standard" from http://forum.xda-developers.com/show....php?t=2012857) (also tried those by developers)
wipe dalvik
reboot > bootloop.
Also tried to wipe everything again.
well, no luck
keep getting bootloop.
help please?
P.S.
I know how to flash a rom...
P.P.S
Moto G 4.4.2 Repack (stock) works.
But no wifi...
Me too bro....
Jur13n said:
So uhh, I unlocked the bootloader.
Flashed CWM Recovery.
and now I was on the point to install a rom..
factory wipe + cache wipe
format system
flash rom (tried cwm and Beanstalk)
flash gapps ("Gapps_Standard" from http://forum.xda-developers.com/show....php?t=2012857) (also tried those by developers)
wipe dalvik
reboot > bootloop.
Also tried to wipe everything again.
well, no luck
keep getting bootloop.
help please?
P.S.
I know how to flash a rom...
P.P.S
Moto G 4.4.2 Repack (stock) works.
But no wifi...
Click to expand...
Click to collapse
Yeah Bro I have this exact problem, except i made a backup and my wifi is working fine now. One thing tho i cannot connect to google servers and when i boot up it says inconsistent UID's device may not work properly format your data partition(formatted it and yah nothing)
cated resionit
Jur13n said:
So uhh, I unlocked the bootloader.
Flashed CWM Recovery.
and now I was on the point to install a rom..
factory wipe + cache wipe
format system
flash rom (tried cwm and Beanstalk)
flash gapps ("Gapps_Standard" from http://forum.xda-developers.com/show....php?t=2012857) (also tried those by developers)
wipe dalvik
reboot > bootloop.
Also tried to wipe everything again.
well, no luck
keep getting bootloop.
help please?
P.S.
I know how to flash a rom...
P.P.S
Moto G 4.4.2 Repack (stock) works.
But no wifi...
Click to expand...
Click to collapse
For no-wifi problem try to flash the rom from page 9 in repack thread. Work for me.
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Worpe said:
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Click to expand...
Click to collapse
If you have a flashing tool then flash the stock firmware again and then give it a try.
Hit Thanks if it helped
Sent from my titan using XDA-Developers mobile app
pg8286 said:
If you have a flashing tool then flash the stock firmware again and then give it a try.
Hit Thanks if it helped
Click to expand...
Click to collapse
Ive tried that 4 times till now. It has been in a bootloop thrice. And I flashed stock. I currently am using stock firmware but want to flash the custom rom. The recovery is failing to wipe data because it is failing to mount data.
Worpe said:
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Click to expand...
Click to collapse
Try this
1. Reboot to recovery (TWRP)
2. Select wipe.
3. Select advanced wipe.
4. Check system.
5. Repair or change file system.
6. Select change file system.
7. Select format type.
8. Swipe to change.
9. Select repair.
there is one problem with stock rom. its encrypts the data partition right after installing stock rom, therefore twrp can't access data partition. i had similar problem earlier. this is how i managed to fix.
solution: http://forum.xda-developers.com/showpost.php?p=67980158&postcount=7
i suggest you to stick with stock rom, because right now whatever roms or recoveries are made for this phone are blindly ported (just copy paste roms). i have tried about 3-4 roms for this phone, all had major bugs especially battery related. there is only one developer who made a stable rom so far is beingtejas, search his thread. if you really want to use a custom rom, try THIS rom made by gaurav kesarwani with help of beingtejas that is why i am suggesting it you otherwise it didn't worked for me atleast.
Worpe said:
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Click to expand...
Click to collapse
Use TWRP 2.8.7. 3.0.0 is a can of bugs...
optimumpro said:
I have a custom rom downloaded. But to flash it, I need to erase everything. That I am unable to do because the recovery dosent wipe data. It led to a bootloop. I got back the stock firmware and tried again and same result. Further more, I cant even factory reset. I'm using TWRP 3.0. Someone please help!
Click to expand...
Click to collapse
Hey You should have to try doing these steps these will helps you-
1.First after wiping cache and dalvik cache FLASH SUPER SU ZIP FILE
2.AFTER THAT FLASH THE ROM AND THEN REBOOT, it will solve the problem.
vickysoni said:
Hey You should have to try doing these steps these will helps you-
1.First after wiping cache and dalvik cache FLASH SUPER SU ZIP FILE
2.AFTER THAT FLASH THE ROM AND THEN REBOOT, it will solve the problem.
Click to expand...
Click to collapse
my internal storage is showing 0 i can download apps from playstore but can't download things from browser can't even take a screen shot
first wipe data and than goto advance wipe options and wipe all but do not wipe microsd
it is success full than install custom rom
can't mount data
I'm using cwm recovery, while factory resetting it can't
mount / data. Please help me.
Thanks