Hello, I dropped my phone a while ago (a couple months) and it cracked the screen allot but the touch screen and lcd/digitizer were working with no issue.
Recently i dropped it again but this time on soft carpet and the LCD and touch screen are not working anymore, the LCD isn't cracked at all. The LED light at the top works and the back and menu buttons work fine.
Help?? plz
There's nothing anyone out here can do to help you for physical damage. You need to either have it repaired or purchase a new device.
Thank you
Thread closed
Related
Hi,
I've broken my Nexus S. The screen is shattered and both the LCD and touch screen don't work. When I turn the phone on the bottom hardware buttons light up, there is the normal small vibration, however there is no display at all on the screen. The phone does seem to boot though.
Basically, I wanted to know whether buying and fitting a replacement screen, LCD and digitizer will fix the problem?
I have a friend who has replaced iPhone screen before and he seems to think that maybe it won't due to the screen not lighting up at all. Obviously I don't want to waste my money and buy a replacement screen for it not to actually work.
Thanks in advance!
I cracked my screen a few months back, and right after it happened I bought a new digitizer to replace the cracked one. The install didnt go very well, since the tape used to adhere the digitizer to the LCD got mangled during removal of the original digitizer. Dust ended up getting between the LCD and Digitizer etc. One other problem I ran into was that the LED's that are supposed to illuminate the home/menu/back/find buttons were now shinning up into the screen and washing it out.
Anyways I got fed up with the dust and bought a new fully assembled screen/digitizer off ebay. I installed it last night and everything is great except that the lights are still shinning up through the glass and washing out the lower inch of the screen. I dont see why this would happen as there is really only one way to put it all back together.
Any insight as to how to get the lights to stop doing this?
Thanks!
Hey, My touch screen isn't responding because of water damage, first I received just a blank screen and now I can see anything but the touch is not working, so... I need to replace the TouchScreen + LCD ? it comes together?
Bring your S6 back to Samsung for warranty repair.
I dropped my opo today from chair, everything is fine no dents at all but some portion of screen the touch doesnt respond. Installed some apps and verified. Please check pics the 1/2 inch horizontal portion across the middle of screen. Is that a hardware issue / need to replace touch or digitizer?
I have a Blu Studio Energy (D810U, I believe). I went to a lot of trouble getting a ROM that had the fewest bugs, but once I did, it worked well until I lent it to a "friend" who promptly smashed the screen. Not just the digitizer but the LCD as well.
I ordered a screen replacement and swapped out the screen. I've done this before, so no sweat - at least until I turned on the phone and found that while it was reading touch input and the backlight was on, there was no picture on the screen. It responded by vibrating when I pressed the capacitative keys on the bottom, and when I pulled the screen slightly out with a suction cup the edges of the LCD were lit up. I removed the assembly, replaced it repeatedly, and finally bought a new screen assembly and put that in. Every time, I had the exact same results.
Does anybody have any idea what's going on here?