I have a problem with a note 2, what happence everytime after a software update it says it could not complete. I tried rooting my phone but i think i failed cause when i root check it says not rooted, but when i go into odin mode on the phone it says current binary:custom and system status:custom. I would like to fix all of this and flash the standard rom.
Related
Model Number: SM-N900A
Android Version: 4.3
Build Number: JSS15J.N900AUCUBMI9
Attempted to root my AT&T Note 3 due to the GPS failure issue using root_de_la_Vega.
The root failed using N900AUCUBMI9_OneClickBin.exe and I ended up with the error “Firmware upgrade encountered an issue”
I wasn't able to boot into recovery and Kies wouldn't recognize the device so I had to use a PIT file and then do a factory restore to correct the soft brick from the initial attempt.
I flashed back to the stock Samsung firmware successfully (somewhat) but Kies won't do any additional udates.
I now am getting constant popups "Unfortunately, Direct pen input has stopped".
I confirmed that in the application manager MyScriptResourceManager is on. It needed an update which I applied and then I rebooted it without success. I then turned the manager off and on again in case that was the problem but the popups are still constant.
I'm not sure how to fix it. Any advice you have would be great.
Hi guys,
I've been trying to update my SM-G870A to Android Lollipop for awhile now. I had it rooted and safestrapped but I took both off to install the update. However, every time I try to update it reboots, gets through part of the update and says, "Update Failed". I tried to use Kies 3 on my computer but it said my software is up to date which I know it isn't. I've done a factory reset from the recovery boot menu and I'm all out of ideas.
Thanks for any help
Download firmware and flash through odin
The bootloader is locked
So,there was a new binary update and I click continue.It installed itself but then it rebooted,so the FPR Lock doesn't allow me to continue.
The phone is continuously restarting showing with red letter up the top "Costum Binary LOCKED by FPR Lock"
I could only launch to Download mode which I did.Then I flashed the stock firmware but it failed with the error Error SW REV. Check Fail Device 4. Binary 3
I tried again,but usb was no longer recognized by pc..
WHAT CAN I DO?I bought the phone 1 year ago and now its useless!
Samsung Galaxy J7 2016 SMJ710FN
(Yes the device is obviously rooted but not romed)
sos brick
i too faced this problem but it is sloved now
download latest rom
https://drive.google.com/file/d/0B6rodr3hdHyaTnVzVTdKdkx3eTA/view
flash with odin 3.10.7.1
pruthvi.g.gtl said:
i too faced this problem but it is sloved now
download latest rom
https://drive.google.com/file/d/0B6rodr3hdHyaTnVzVTdKdkx3eTA/view
flash with odin 3.10.7.1
Click to expand...
Click to collapse
Is it surely the rom for the SMJ710FN model?
Will my sim work?(EUROPE)
Try and see.
I rooted my phone a a few days ago and now I'm trying to get back the official firmware which should be possible.
I flashed TWRP, SuperSU and "no-verity something".
Yesterday I tried to unroot my phone and I saw in a tutorial I only have to press the fully unroot button in SuperSU and it should work.
Well it did, but I still couldn't open Snapchat I thought it was TWRP. I saw that I need root access to uninstall TWRP. I tried to flash SuperSU once again and then my phone just gave up.
It didn't break or something, but when I boot my phone normally it I get an error message, I have a german phone... I can't translate it perfectly, but it says some "integrity check" has failed and I have to factory reset my phone. That's where the problems started.
When I press the "reset" button, it tries to factory reset my phone, but I think it can't read internal memory. When I connect it to my PC it only shows my SD card.
When I go to wipe on TWRP it shows "internal memory 0MB" and I think it has some difficulties reading the internal memory.
My question is, is there a possibility to get the J710FN firmware and all the things back, like the original recovery and all the things.
I tried to flash the original global firmware via ODIN3 v3.12.3 but it fails. My phone says "SW REV CHECK FAIL Device: 4 Binary: 3"
I just want to get back the original firmware without any rooted things so my phone works again.
Oh and I tried to factory reset it in case somebody thinks that's the problem.
Factory resetting doesn't work, because I THINK my phone can't read the internal memory.
I really hope someone can help me.
You can ask me any kind questions for information you need to gather to help me.
Thank you in advance!
I think sw rev check fail (software reverse)mean's that you are trying to flash an out dated firmware (in comparison to the firmware that your phone has on it now)Your phone will block you trying to downgrade your firmware.
Before you do anything you could try the emergency software update and Initialisation in smart switch,I think you need is your phone's serial number(if you still have the box i will be on there)
If all else fail's you could try downloading the most up to date software from sammobile and flash it with the most up to date version of odin you can find
I tried to root my J5 prime with a modified stock room and it worked fine until I rebooted it and then did not want to turn it on again. and now it does not let me flash anything, just mark that error s rev check fail device 3 binary 2.
I can not access my device because it lacks an operating system. so I can not unlock AOM or USB debugging what should I do?