[Q] Samsung Galaxy S5 Active Sofware Update Failed - General Questions and Answers

Hi guys,
I've been trying to update my SM-G870A to Android Lollipop for awhile now. I had it rooted and safestrapped but I took both off to install the update. However, every time I try to update it reboots, gets through part of the update and says, "Update Failed". I tried to use Kies 3 on my computer but it said my software is up to date which I know it isn't. I've done a factory reset from the recovery boot menu and I'm all out of ideas.
Thanks for any help

Download firmware and flash through odin

The bootloader is locked

Related

[Completed] Need Help Fixing my Semi-Bricked Galaxy S5

EDIT: See bottom of post
Hello everyone, and thanks for taking the time to attempt to help me.
Earlier today, my T-Mobile Galaxy S5 updated to 5.1.1. I searched google and came across a few links on how to root my phone (G900T) - The one I ended up using was CF-AutoRoot
I used Odin 3.07, used the tar5 file from that site above where I downloaded the root, and attempted to root the phone. Odin says everything worked as planned ''passed'' was displayed with 0 fails. I waited about 20 minutes, but my phone never rebooted, it was stuck in a boot logo loop ' 'Samsung Galaxy S5 powered by Android'' or ''T-Mobile'' was displayed.
I tried going into recovery and reseting all data / factory wipe but that didn't help, and made it even worse. Now my phone says this when I try to turn it on: ''Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again''
How do I go about getting back to stock firmware , that is rootable, so I can then proceed to install CyanogenMod?
EDIT: I used Kies and was able to get back to stock firmware and the phone turns on.
Can anyone recommend a reliable root for the G900T S5?
FreakLikeChewy said:
EDIT: See bottom of post
Hello everyone, and thanks for taking the time to attempt to help me.
Earlier today, my T-Mobile Galaxy S5 updated to 5.1.1. I searched google and came across a few links on how to root my phone (G900T) - The one I ended up using was CF-AutoRoot
I used Odin 3.07, used the tar5 file from that site above where I downloaded the root, and attempted to root the phone. Odin says everything worked as planned ''passed'' was displayed with 0 fails. I waited about 20 minutes, but my phone never rebooted, it was stuck in a boot logo loop ' 'Samsung Galaxy S5 powered by Android'' or ''T-Mobile'' was displayed.
I tried going into recovery and reseting all data / factory wipe but that didn't help, and made it even worse. Now my phone says this when I try to turn it on: ''Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again''
How do I go about getting back to stock firmware , that is rootable, so I can then proceed to install CyanogenMod?
EDIT: I used Kies and was able to get back to stock firmware and the phone turns on.
Can anyone recommend a reliable root for the G900T S5?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
It's good to hear that you managed to revive your phone. Many of us find it convenient to install a custom recovery such as TWRP which makes backing up and restoring, switching ROMs, and many such activities much easier. XDA happens to have an active and friendly area dedicated to the Samsung Galaxy S5, and specifically to the T-Mobile version at http://forum.xda-developers.com/tmobile-galaxy-s5. I suggest you search that area or simply post your question in the Q&A forum there at http://forum.xda-developers.com/tmobile-galaxy-s5/help where our experts will be most likely to be able to guide you.

galaxy s3 semi-bricked need help!

bought this second hand verizon galaxy s3 4.4.2, rooted it with towelroot, and flashed twrp using twrp manager and when i tried to boot into recovery, i had a warning sign that software has been tampered with and i should contact verizon for help, i tried to recover using a stock rom with odin but it fails each time, i did some researcch for many hour without success.
sometimes the screen tells me to use software repair assistant, i was able to download it but it never detected the phone, just sits there while phone is connected, btw drivers have been successfuly installed.
i tried kies, didn't work either.
i know now that it had to do with locked bootloader, but this is my first verizon phone.
please any help will be appreciated!
Edit and solved!!!
refer to:
http://forum.xda-developers.com/showthread.php?t=2586319&page=31#post65689151

[HELP] Samsung Galaxy 6 SM-G920T NO OS

First my phone was rooted before this but I tried to install XPOSED but it didint work it had me doing a bootloop so i thought about wiping my phone and didint think my OS would get erased now my phone just stays at the SAMSUNG GALAXY S6 screen I installed TWRP but no luck there people told me to install that but no luck I hope I can get some help ive tried to install stock firmware with odin but it keeps saying FAIL please help!
bump
Here are official firmwares for your device. Boot your device into download mode and connect your phone, it should show up in Odin, then select the file you downloaded from sammobile and flash it from there. If you get any errors, please post the log here and I'll take a look at it.

Verizon Samsung Galaxy S5 SM-G900V: Bricked or Not Bricked?

So I was trying to root my S5 using this method.
https://forum.xda-developers.com/ve...oot-method-t3561529/post71202995#post71202995
I followed the instructions correctly until it prompts you to install a firmware. Since I thought a newer version than 5.0 Lollipop is available why not right? However, as soon as I installed the firmware the phone was stuck on "Samsung Galaxy S5" boot logo. So, I tried booting the phone in recovery but an error popped up saying, "Custom binary blocked by Reactivation Lock". At that moment I was worried that I bricked my phone, so I had to confirm it.
Is this error telling me that I bricked the phone? If so is my phone unusable now?
But if it's not bricked is there any way to fix it?

How to get official firmware back on Samsung Galaxy J7 (2016) J710FN ?

I rooted my phone a a few days ago and now I'm trying to get back the official firmware which should be possible.
I flashed TWRP, SuperSU and "no-verity something".
Yesterday I tried to unroot my phone and I saw in a tutorial I only have to press the fully unroot button in SuperSU and it should work.
Well it did, but I still couldn't open Snapchat I thought it was TWRP. I saw that I need root access to uninstall TWRP. I tried to flash SuperSU once again and then my phone just gave up.
It didn't break or something, but when I boot my phone normally it I get an error message, I have a german phone... I can't translate it perfectly, but it says some "integrity check" has failed and I have to factory reset my phone. That's where the problems started.
When I press the "reset" button, it tries to factory reset my phone, but I think it can't read internal memory. When I connect it to my PC it only shows my SD card.
When I go to wipe on TWRP it shows "internal memory 0MB" and I think it has some difficulties reading the internal memory.
My question is, is there a possibility to get the J710FN firmware and all the things back, like the original recovery and all the things.
I tried to flash the original global firmware via ODIN3 v3.12.3 but it fails. My phone says "SW REV CHECK FAIL Device: 4 Binary: 3"
I just want to get back the original firmware without any rooted things so my phone works again.
Oh and I tried to factory reset it in case somebody thinks that's the problem.
Factory resetting doesn't work, because I THINK my phone can't read the internal memory.
I really hope someone can help me.
You can ask me any kind questions for information you need to gather to help me.
Thank you in advance!
I think sw rev check fail (software reverse)mean's that you are trying to flash an out dated firmware (in comparison to the firmware that your phone has on it now)Your phone will block you trying to downgrade your firmware.
Before you do anything you could try the emergency software update and Initialisation in smart switch,I think you need is your phone's serial number(if you still have the box i will be on there)
If all else fail's you could try downloading the most up to date software from sammobile and flash it with the most up to date version of odin you can find

Categories

Resources