I tried to install unofficial cwm for my tablet cause it is chinese or something and it failed,i backed up the stock recovery in internal memory before doing it but forgot to copy from the device to my pc now i flash different recoveries and none works,btw when it starts i hear the usb from my pc working which mean it might start on fastboot,i wan't to ask if:
1)There is any way i can access the internal memory through fastboot so i can get the original recovery and install it.
2)If someone here has a backup of the recovery (The model is eStar IPS Quad Core 7' tablet).
3)If there's an unofficial cwm that works with tablets like the one i have.
Thanks,and please even if you are not sure just answer i want to save it cause i bought it yesterday
Unless you can find stock firmware, and flash the recovery. You may wish to ask in the thread that you found the recovery (if the thread was meant for your device). I was unable to find anything about your device on XDA
I can only suggest you register and ask your question here http://forum.xda-developers.com/showthread.php?t=2259645
Good luck
Related
Hi All,
I'm completely lost on this one, I want to get help with a bricked device but do not know what the device is, thus unsure where to ask.
I tried to flash CM10 onto the device, but now realise I got something very wrong as touch screen does not work.
Only buttons on device are volume or power, Seemingly i cannot find a combination of these that will go to bootloader, adb nor any other program i have tried will pick up the device, trying with UBUNTU 14.04 and Windows 7 both without success. Gets stuck on a screen telling me about compatibility zoom (all it needs is press ok to continue but touch screen unresponsive).
Its an unbranded 7 inch tablet with an Allwiner A10, attched should be all the photos needed for someone to work out what it is (i hope) as well as one before I broke it of its original ROM build. Has a mini usb connection on it for connecting to PC.
Worst case i want to flash the original ROM back on it, best case I get new fancy ROM working once I can establish which device it is.
Any help would be much appreciated.
I used to own an a7 and was able to find a few ROMs for that tab back when, I'm sure there is something out there for your device but be sure to only flash software meant for your device or there can be serious issues
A great place to ask for help will be in the general q&a forum found here
http://forum.xda-developers.com/android/help
Best of luck!
Thread closed an thanks!
Okay so I love my HTC One but..... A while ago out of the blue, It started acting funny. The operating system (Android Revolution at the time) started to stop working. I'd never had any troubles with Android Revolution until then. So I decided to re flash the OS, which was a really bad idea. I made a TWRP backup before I started anything, like I usually do. I was planning on doing a full system wipe for a clean install so I needed to move the backup off the device. That's when I found out that the USB wasn't working so I ended up moving the backup via wifi. So I gave the phone a full wipe and started installing my OS again (A newer version of Android Revolution). It definitely wasn't corrupt, I checked the Md5 sum. From there it refused to install so I gave up gave it all another wipe and I tried to put the old backup back on but I couldn't. That's where I'm at now and have been the last month or two.
Current State:
Able to access bootloader and recovery only
Nothing on the device's storage
Only Charging while off
Not recognized by my computer (ADB and Fastboot)
Not able to mount USB OTG in TWRP
Not able to mount system in TWRP
What I have Tried:
Different USBs
Just about every different driver I can find
Different ADB and Fastboot versions
Different computers
Device Information:
M7_UL
S-ON
HBOOT-1.56.0000
RADIO-4A.17.3250.14
OpenDSP-v32.120.274.0909
Recovery - TWRP v2.6.3.3
I've been looking all over the internet for a solution but I can't find anything to help me fix this.
Hi there,
You'd be best served asking for help from the experts who own your device, here:
So you came at XDA-Developers to find help? (Beginners Thread)
FYI: [GUIDE] How to Return to 100% Stock
Good luck
Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck
Hello,
I think I have semi hard bricked my phone, and have been surfing since then, to find a solution :
I un rooted via kingoroot in order to change the glass that was on warranty.
I decided then to execute ART instead of dalvik, and the phone won't boot till then.
It charges, the boot sequence stops at the logo.
I'm unable to use the recovery or download modes.
The phone is not recognised on windows .
--> using a FEL Mode, I guess, the device is recognised as an external SD ith 22 partitions.
I don't have the images of my phone (CAT s50), but the specs are similar to the LG G3 Vigor :
CPU/GPU etc...
I know that it is written everywhere that you can't intall a rom not suitable for your phone, because I think it leads to a bricked device.
The fact is I don't know the level of inutility of my ex-phone.
Did someone ever grafted a ROM from another brand?
Has someone an information to recover my old and functionnal cat s50 from the FEL mode?
XDA Visitor said:
Hello,
I think I have semi hard bricked my phone, and have been surfing since then, to find a solution :
I un rooted via kingoroot in order to change the glass that was on warranty.
I decided then to execute ART instead of dalvik, and the phone won't boot till then.
It charges, the boot sequence stops at the logo.
I'm unable to use the recovery or download modes.
The phone is not recognised on windows .
--> using a FEL Mode, I guess, the device is recognised as an external SD ith 22 partitions.
I don't have the images of my phone (CAT s50), but the specs are similar to the LG G3 Vigor :
CPU/GPU etc...
I know that it is written everywhere that you can't intall a rom not suitable for your phone, because I think it leads to a bricked device.
The fact is I don't know the level of inutility of my ex-phone.
Did someone ever grafted a ROM from another brand?
Has someone an information to recover my old and functionnal cat s50 from the FEL mode?
Click to expand...
Click to collapse
Hello,
Please register for a XDA account.
You may try posting your query here Android Q&A, the experts there maybe able to assist you.
-Vatsal
I have wiped completely my MX4 Pro (all tics. My bad) and now cannot restore. I had TWRP (custom MX4Pro version) installed, and wiped from that version. Once restarted, I only see MEIZU logo over black screen. Cannot start in recovery (if such, Meizu in black), bt recovery (Custom TWRP for MX4 Pro) should be somewhere as you are not able to "auto wipe" recovery using that custom recovery
If I connect in such situation my Meizu to my computer, I see MTP device, but nothing more. No folder to copy the firmware.
When I connect the phone in "off" state, nothing happens
I have a feeling I could contact with the device using ADB. Perhaps, even "reactivate" the TWRP and boot in TWRP recovery, as TWRP must be somewhere inside (I did not wipe recovery), but I have no clue.
Trying to contact using ADB (not 100% sure I am doing things correctly) seems there is nothing running in the telephone side. Wonder if there is a way to reflash.
Could anyone help me try to recover this piece of hardware. I was sooooooooooooooooo satisfied with it.....
Thank you in advance
Regards
Hi !
Duplicate post , the original can be found here
Let's hope that there will be more answers from users with a similar device
Please don`t post the same question on multiple threads , thanks for understanding
Thread closed