Hi Peeps
not sure if this is the right place to post this but I hope you can help. I have the Gbox MX box which I bought for using xbmc. I want to update the firmware on it but when I power up with the button pressed as all tuitorials say to do, NOTHING happens except the box boots up as normal. I was wondering if this has been disabled? or is my box faulty?
When I try using OTA-Updater, under Available Updates, it says "Error fecthing update info invalid ROM ID(DMX20130725)!" and if I click on that bit it says "Invalid ROM ID(DMX20130725)!"
I am baffled...please can anyone help?
Related
Hi all
Just bought this Android tv box
http://www.aliexpress.com/item/XBMC...ogle-Amlogic-8726-MX-Cortex-A9/613059048.html
Flashed it with firmware from this thread
http://forum.xda-developers.com/showthread.php?t=2157163&page=2
Than did the over the air update to latest firmware.
All rebooted ok and was working, only problem i had was i tried to install xbmc and it said there was not enough space so i decided to go back to the backup of the previous firmware that i had made.
When i tried to reboot the box the blue light comes on but there is nothing coming on tv, have tried with a pin in the back to boot in to recovery but tv says no signal. Have tried 2 hdmi cables and both working fine on blu ray player but nothing coming from tv box
Anyone got any ideas?
Thanks
freejack2k
Hi,
I bought my wife this tablet but it keeps on giving me a "cannot connect to the camera" error. I have checked it with many camera apps as well as from gallery but the same result a black screen and the error message. I have searched high and low on the device for an "update software" icon but the is none to be found in the settings. About the device shows a Baseband that starts with MOLY or MOBY and the Firmware with HT7 and shows as custom ROM HT7. Any ideas as to whether I can flash a newer firmware or a custom rom. It is currently on 4.4.2.
Your assistance would be appreciated.
Regards,
Shane.
[email protected] said:
Hi,
I bought my wife this tablet but it keeps on giving me a "cannot connect to the camera" error. I have checked it with many camera apps as well as from gallery but the same result a black screen and the error message. I have searched high and low on the device for an "update software" icon but the is none to be found in the settings. About the device shows a Baseband that starts with MOLY or MOBY and the Firmware with HT7 and shows as custom ROM HT7. Any ideas as to whether I can flash a newer firmware or a custom rom. It is currently on 4.4.2.
Your assistance would be appreciated.
Regards,
Shane.
Click to expand...
Click to collapse
Hello Shane, and thank you for using XDA Assist!
Even Google is failing me with this make and model. Doesn't sound right.
Could I get you to go into Apps > Settings > About Tablet/Device and reply back with the "Device Model" line as well as the "Build number" line, exactly as it is written?
Many thanks.
I have a Proscan PLT7650G tablet it came installed with Android 5.1.1. It is running a RK3126 SoC. I had rooted it with Kingroot and then switched to SuperSU. I then tried to install Xposed framework for Lollipop using the Flashify app. The tablet rebooted and when I got to the login screen it had a message box "Stresstest for 5.0 has stopped running". When I hit OK another comes up that says "The process com.android.phone has stopped running". I hit OK and the previous message box comes up. This continues for as long as I keep pressing OK. Sometimes it also says that the System UI has stopped running. I cannot access any of the OS. I eventually tried to run the factory reset from recovery, and the same issue persisted. I assume this is because of the system partition being modified. I have backups of all the partitions made using the Rockchip Android tool. I tried to flash the tablet with the tool and it says Test device fail, or download fail. I have also tried to flash with Rockchip batch tool with firmware I thought may be compatible, and it gave me a similar message.
I didn't install custom recovery, but I can still access stock recovery, and can still get to the error messages after boot. I don't have USB development enabled, and fastboot doesn't recognize my bootloader.
Any help you can recommend will be extremely appreciated. I have spent the past week trying to get this thing running. I am very sorry if there is a similar thread posted somewhere or if it is a stupidly easy fix. I also apologize if this is posted in the wrong spot. I am new to forums in general.
I have very limited internet access, so it may take me several days to respond to any posts.
A HUGE thanks to anyone who can help me.
mordezmois said:
I have a Proscan PLT7650G tablet it came installed with Android 5.1.1. It is running a RK3126 SoC. I had rooted it with Kingroot and then switched to SuperSU. I then tried to install Xposed framework for Lollipop using the Flashify app. The tablet rebooted and when I got to the login screen it had a message box "Stresstest for 5.0 has stopped running". When I hit OK another comes up that says "The process com.android.phone has stopped running". I hit OK and the previous message box comes up. This continues for as long as I keep pressing OK. Sometimes it also says that the System UI has stopped running. I cannot access any of the OS. I eventually tried to run the factory reset from recovery, and the same issue persisted. I assume this is because of the system partition being modified. I have backups of all the partitions made using the Rockchip Android tool. I tried to flash the tablet with the tool and it says Test device fail, or download fail. I have also tried to flash with Rockchip batch tool with firmware I thought may be compatible, and it gave me a similar message.
I didn't install custom recovery, but I can still access stock recovery, and can still get to the error messages after boot. I don't have USB development enabled, and fastboot doesn't recognize my bootloader.
Any help you can recommend will be extremely appreciated. I have spent the past week trying to get this thing running. I am very sorry if there is a similar thread posted somewhere or if it is a stupidly easy fix. I also apologize if this is posted in the wrong spot. I am new to forums in general.
I have very limited internet access, so it may take me several days to respond to any posts.
A HUGE thanks to anyone who can help me.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Please ask your question here:
Android Q&A
You'll receive expert advice there. Good luck!
what happen was that my phone refuse to browse with any of my browsers except WhatsApp alone, so a friend advice me to do the hard rese on it which i did..after i press the reset button, I realise the phone just stuck on one chinese language like that up to an hour so I decide to power it off myself. Since then it has stuck in it welcome logo Nd nothing more..please help me...one more thing, I raced to "xtouchdevice.com" the device manufacturer website to download the firmware but unfortunately, the file I downloaded refused to be extracted on my laptop saying "error 0x80004005: unspecified error"... Please kindly come to my aid please...The TABLET NAME IS " XTOUCH PF83". I'll be expecting your reply asap...please
Try this http://www.needrom.com/download/xtouch-pf83/
its not [email protected] too
thanks for your concern bro...have downloaded the firmware but its not extrating on my laptop still displaying "error 0x80004005".infact am out of ideas right now,mayb its my laptop or the files that is damage i don't just know!
http://support.microsoft.com/en-us/kb/914232
Hi! I'm not sure I'm in the right place to ask this but I'll give it a go anyway.
Iv'e got an AnyCast M2 Plus dongle with a rockchip rk3066 chipset. It hasn't worked from the day I opened the box.
I have an image of the screen but the rules here won't let me link to it;
Basically it says the following:
for the ip it says "192.168.49.1"
below that it says "SP-AAF340"
and below that it says "Waiting for connection"
Iv'e searched literally 1000's of sites but I can't find any way to reset it nor can I find a working firmware.
Has anyone else had a similar issue?
It's not critical that I get it working but I can't just not try to fix it.
Thanks in advance.
TheYikes