please help! my xtouch pf83 refuse to boot pass its start up logo... - General Questions and Answers

what happen was that my phone refuse to browse with any of my browsers except WhatsApp alone, so a friend advice me to do the hard rese on it which i did..after i press the reset button, I realise the phone just stuck on one chinese language like that up to an hour so I decide to power it off myself. Since then it has stuck in it welcome logo Nd nothing more..please help me...one more thing, I raced to "xtouchdevice.com" the device manufacturer website to download the firmware but unfortunately, the file I downloaded refused to be extracted on my laptop saying "error 0x80004005: unspecified error"... Please kindly come to my aid please...The TABLET NAME IS " XTOUCH PF83". I'll be expecting your reply asap...please

Try this http://www.needrom.com/download/xtouch-pf83/

its not [email protected] too
thanks for your concern bro...have downloaded the firmware but its not extrating on my laptop still displaying "error 0x80004005".infact am out of ideas right now,mayb its my laptop or the files that is damage i don't just know!

http://support.microsoft.com/en-us/kb/914232

Related

Q help lenovo s5000-h stuck in loading start screen

Please help me guys
device : Lenovo s5000-h
android version: 4.4.2
here's what happen, my tablet got slower because of too much apps. Installed by my daughter now, what i did is hard reset it,then after formatting it was successful, now after that it says the device needs to be updated, after it downloaded the update then ask for a reboot, after that it started to install the update, im not doing anything and wait the suddenly it say failed to updated.. After that i rebooted it again, now im stuck on starting screen after the lenovo logo appears... I provided some screenshots... I dont know what to do please help me anyone who is good in this... Any advice and help would be pretty much appreciated..
Regards vans
With my tablet this extacly issue happens but I tried pressing Power OFF and only VOLUME UP !! trigger then a chinese menu appeard. Here it is opposite as to the menu in English, because you use volume up to accept and volumne down to go through different modes - select the only option that contains some letters in English (smth like e MMC...) : this will bring your tablet to the point as if it was recently purchased so you will need to start from setting it up again, but it works again and very smoothly. hope it will help!. You can watch detail for this process in Lenovo S5000 Tablet Manual. Good luck.

[Completed] Please Help, secure booting error lg optimus f3 LG MS659

I keep getting a message on the LG startup screen, that says,
"secure booting error
cause: boot certification verify"
My phone was rooted using king root almost 6 months ago, and I had no problems with it. Until around a month ago, it started getting real slow and apps would randomly stop. So I decided to format the phone. There weren't many problems after that. but after a while it started getting slow again, but slower than the first time. One day almost every app closed and "LG Home" would close, it would give me some kind of error. I turned it off and tried turning it back on, but that's when I got that error. At first i thought my phone was bricked, i still sort of do, so I tried several methods. I can only turn the phone on in download mode, and my computer recognizes it as an android device.
At first I had some problems because i couldn't find my right .KDZ file, I used KDZ Update and I tried using LGFlash tool, but i can't find any of the files (.bin . dll) I need. I've also tried using the 2014 version of the LGFlash and used the LG Mobile Support tool, and nothing! They all take around 4 to 5 hours to finish!!! It never says there's an error or anything, none of them do! They always finish successfully, but the same thing keeps happening. Every time the phone reboots, it gets stuck on the LG logo and i get the secure booting Error!! What else can i try? Any suggestions? Am i missing something? All drivers are installed correctly and I've tried on windows 7, 8 and 10! Is there anybody who can help me? What do you think the problem could be? What causes the "secure booting Error!"?? :crying: :fingers-crossed:
ricardoryz said:
I keep getting a message on the LG startup screen, that says,
"secure booting error
cause: boot certification verify"
My phone was rooted using king root almost 6 months ago, and I had no problems with it. Until around a month ago, it started getting real slow and apps would randomly stop. So I decided to format the phone. There weren't many problems after that. but after a while it started getting slow again, but slower than the first time. One day almost every app closed and "LG Home" would close, it would give me some kind of error. I turned it off and tried turning it back on, but that's when I got that error. At first i thought my phone was bricked, i still sort of do, so I tried several methods. I can only turn the phone on in download mode, and my computer recognizes it as an android device.
At first I had some problems because i couldn't find my right .KDZ file, I used KDZ Update and I tried using LGFlash tool, but i can't find any of the files (.bin . dll) I need. I've also tried using the 2014 version of the LGFlash and used the LG Mobile Support tool, and nothing! They all take around 4 to 5 hours to finish!!! It never says there's an error or anything, none of them do! They always finish successfully, but the same thing keeps happening. Every time the phone reboots, it gets stuck on the LG logo and i get the secure booting Error!! What else can i try? Any suggestions? Am i missing something? All drivers are installed correctly and I've tried on windows 7, 8 and 10! Is there anybody who can help me? What do you think the problem could be? What causes the "secure booting Error!"?? :crying: :fingers-crossed:
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck.

Lenovo S856 China Unbricking tutorial

Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
way2aware said:
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Click to expand...
Click to collapse
Prajiro said:
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
Click to expand...
Click to collapse
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
way2aware said:
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
Click to expand...
Click to collapse
Finally got the process started,...but after 7s I got and error message Reached the end of the file.(0x80070026: Receiving hello packet)
Could it be my PC (win 10 32 bit) problem or what do you think?
This happened to me as well, the first and second time I tried the flash. There is a trick which worked for me... I pulled the battery out and put it back in and while holding the volume 'up' button, I plugged my phone into my computer usb port and let windows install the driver. It took a few seconds and then I clicked 'refresh' on the Miflash window, which I had left on. At this point the 'flash' button became available and I clicked on it. This time the flash was successful. Try it.

Honor 8 AL-A00 help please

Hello, I bought an Honor 8 online and it's an AL-A00 which is chinese, it's been 2 days that I've had it, and yesterday, my phone was spamming me to do this new update, which I decided to do. Now I'm stuck in this EMUI screen and everytime it's updating it tells me "getting package info failed". The only other options I have is "Reboot" and "Shutdown" both just turn off the phone and bring me back to the same sreen "Huawei eRecovery" no matter what. I've seen online that I can somehow manually update it or "patch" it with an SD card and all the "dload" stuff. Except I've done it 4 times already with different "update.app" files and each seemed to work at the beginning until it tells me "wrong version" or something like that. Can anyone please help me ? Please don't use technical words or complicated vocabulary since I'm not that good with all this phone stuff. Anyone know what do to or have any links/tutorials ? Please

Please help:bootloop Iget Blackview a7 (eu gold version)

Hello everyone,
as its said in title i managed to f*** up my device and cant get out of bootloop.
to explain more ill give some hopefully inportant details:
This was my first root attempt ever(meant without apps like kingroot,kingoroot etc.)
I succesfuly got to unlock bootloader and with fastboot i achieved getting TWRP on it,
after change of twrp language i rebooted the phone(the tutorial i read said to do it)
This is the part when i start to f*** up
My phone rebooted and said :
*Orange Code:
Your device is unlocked and can`t be trusted
Your device will boot in 5 seconds. *
... My first idea was that maybe i was supposed to lock the bootloader back so i did that,that resulted in red code with similiar message about something being off and phone rebooting,so i unlocked it back cause orange > red ,then i googled and discovered that i was supposed to delete all of my data n cache to make sure,so i tried,i got some text about success with cache but data failed with text that it cant find this folder,so i tried to reboot like it didnt said anything about failing(this happens in a lot of software and still manage to somehow workout so i told myself this was the situation),what didnt happen?Orange code again,so i started panic,searched how to restore original rom through fastboot,got some tutorial again telling me to download original rom and file after file flash these,so i tried,it worked until i got to boot.img file,it said that it wasnt boot file at all,so in pure panic and desperateness i procceded to download some recovery.img file in hope that this will do the trick and the original bootloader will recognise it and let me back to my phone,well that was terrible,terrible mistake,now im stuck in bootloop(orange code),cant get into recovery or fastboot by any key shortcut(i tried all i could find up+power,down+power,up+donw+power,just power,nothing works,only thing that happens is that after some time it just shows boot logo and is stuck there)so im desperate,my pc doesnt identify it,fastboot doesnt too,not even adb)so i ask here for help with my sincere pleading and thanks.
Disclaimer:Im sorry if there are some mistakes in text english is not my main language and its my first try to ask for help on technical forum so i hope i didnt done something wrong
Edit:i achieved getting to normal boot logo (seems like kind of random thing will try to get more info how,and in this state its just stuck here doing nothing but device manager recognise it as A7 as it would been normally plugged in exept giving warning (Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)),so that could maybe help that pc recognise its being connected but still nothing further,no fastboot no adb,no sp flash tool

Categories

Resources