Related
I am using clockwork for my recovery and I have been getting an error while in recovery "can't mount SD". The problem is, when this happens I can not flash a rom, update Gapps, cant flash a nand back-up etc.. When this happens I will reboot my phone and sometimes after several hours many attempts I will try and it will work.
I have upgraded recovery I have downgraded recovery and still getting the same issue. My last thought is to go back to stock and start over. Any one know why I am getting this?
jdh10475 said:
I am using clockwork for my recovery and I have been getting an error while in recovery "can't mount SD". The problem is, when this happens I can not flash a rom, update Gapps, cant flash a nand back-up etc.. When this happens I will reboot my phone and sometimes after several hours many attempts I will try and it will work.
I have upgraded recovery I have downgraded recovery and still getting the same issue. My last thought is to go back to stock and start over. Any one know why I am getting this?
Click to expand...
Click to collapse
Flash via 'fastboot flash recovery recoveryname.img'
Have you tried twrp http://forum.xda-developers.com/showthread.php?t=2507851
or philz http://forum.xda-developers.com/showthread.php?t=2565174
GUGUITOMTG4 said:
Flash via 'fastboot flash recovery recoveryname.img'
Have you tried twrp http://forum.xda-developers.com/showthread.php?t=2507851
or philz http://forum.xda-developers.com/showthread.php?t=2565174
Click to expand...
Click to collapse
I tried to flash recovery with fastboot all went well but I wasn't able to access sd again. I ended up going stock with factory image and all is good now. Thanks for the heads-up on philz recovery I really like it.
It's been quite a while since I messed with ROMs on my phone, so I thought I might look into updating it. I am currently running TWRP 2.8.5. Using the app from the app store, I tried to update it to the current version, but it failed. From there, I restarted my phone, and it took me into recovery. From here, I have been unable to escape. I keep rebooting from within TWRP, and it just returns me right back to TWRP. I'm sure it's something that I'm overlooking. Can someone help me figure out what I'm doing wrong? I am rooted, with S off.
Thanks!!
Your recovery may have been flashed to the boot partition. This was a problem with the twrp app a long while back which I assumed had been fixed but perhaps not. Download the latest twrp (2.8.5 is kinda old at this point) and flash it from a computer via fastboot:
Fastboot flash recovery [nameofrecovery].img
Boot into your new recovery, check the version number to make sure it's the new properly flashed recovery, and either restore a nandroid or flash a new Rom.
Hello everyone.
I had a problem flashing TWRP on my Google Nexus 5, or better the problem comes when I try to enter the recovery.
I followed this pattern from stock android 6.0.1 with august security patch:
1) unlock bootloader
2) downloaded lastest TWRP (3.0.2 hammerhead) recovery from the official website
3) flash it with "fastboot flash recovery recovery.img"
Until this point everything's alright but then when I unplug my phone from the laptop and click on enter recovery something strange happens.
I can see the TWRP boot image but as soon as I go in I see tons of errors related to "cannot mount ..." and some partitions name like /data, /cache, and then starts the bootloop without let me any chance to do something. Sorry but I can't see every error beacuse this happen too fast.
Any idea on what is going on?
I've tried the TWRP 3.0.1 but is the same shuold I go down or maybe I have to change it beacuse of compatibily issues with the monthly patches?
Thank you for your help, I hope I explained my problem clearly.
After unlocking the bootloader, phone wipe all data? Did you reboot after unlocking bootloader?
audit13 said:
After unlocking the bootloader, phone wipe all data? Did you reboot after unlocking bootloader?
Click to expand...
Click to collapse
No I've just unlocked and then tryied to flash the recovery without wipe.
But data is already wiped by unlocking the bootloader isn't it?
Anyway thanks for your reply as soon as I can I'll try what you have written.
Yes, the data should be automatically wiped. Try TWRP 2.87. If the phone still doesn't boot into TWRP, reflash stock recovery, flash userdata.img, immediately boot into stock recovery using the button combo without rebooting, perform a factory wipe, reboot into fastboot, and flash TWRP again.
audit13 said:
Yes, the data should be automatically wiped. Try TWRP 2.87. If the phone still doesn't boot into TWRP, reflash stock recovery, flash userdata.img, immediately boot into stock recovery using the button combo without rebooting, perform a factory wipe, reboot into fastboot, and flash TWRP again.
Click to expand...
Click to collapse
Thank you so much for telling me to flash the 2.8.7, i've choosen the 2.8.7.1 without success (it did't flash i don't know why) but then after another wipe all I've flashed the 2.8.7.0 and it seems to work.
The only thing I would like to ask now is: I'm going to flash superSU and elementalX over stock AOSP (I don't want custom ROM for now) and can this recovery cause problem because of it is not the last update?
Thank you again for the answer!
I have not tried 2.87 with Elemental X. The only way to determine whether it will work would be to try it. I recommend creating a nandroid backup before flashing Elemental so you can restore if something goes wrong.
TWRP Restore problem
Hi, I have an issue with the resotre of TWRP...
Here's what I did:
-Downloaded the latest OTA image https://developers.google.com/android/nexus/ota
-Downloaded latest SuperSU http://download.chainfire.eu/supersu-stable
-Downloaded latest ElementalX http://elementalx.org/devices/nexus-5/
-reboot to TWRP
Choose OTA, then SuperSU, then ElementalX
Luunch the restore..
And my screen is "blocked" from 5 hours on Install Zip 1 of 3.
"blocked" means doesn't move to the Zip2 but the clock is moving... the screen is locking itself after few seconds and I am able to unlock it...
Any idea how to exit properly ?
I have rebooted...deleted all my music... (I think that the issue may come from insufficient disk space) and relaunched...
Will see...
download Nexus Root Toolkit-type in google Nexus Root Toolkit - and watch from yuotoube how it work's
good luck
hunter-dz said:
download Nexus Root Toolkit-type in google Nexus Root Toolkit - and watch from yuotoube how it work's
good luck
Click to expand...
Click to collapse
My N5 was already rooted... and it's the second time that I update the OTA using directly TWRP... and for the August patch it has worked fine.
I don't know what's happen now...
kevtuning said:
My N5 was already rooted... and it's the second time that I update the OTA using directly TWRP... and for the August patch it has worked fine.
I don't know what's happen now...
Click to expand...
Click to collapse
Download thé nrt and i Will teach how to root ur n5
And type in Google nrt n5 xda
audit13 said:
I have not tried 2.87 with Elemental X. The only way to determine whether it will work would be to try it. I recommend creating a nandroid backup before flashing Elemental so you can restore if something goes wrong.
Click to expand...
Click to collapse
Now I can confirm that I was able to flash the lastest SuperSU and ElementalX with TWRP 2.8.7.0 without any problem, so thank you again for your help.
kevtuning said:
Hi, I have an issue with the resotre of TWRP...
Here's what I did:
-Downloaded the latest OTA image https://developers.google.com/android/nexus/ota
-Downloaded latest SuperSU http://download.chainfire.eu/supersu-stable
-Downloaded latest ElementalX http://elementalx.org/devices/nexus-5/
-reboot to TWRP
Choose OTA, then SuperSU, then ElementalX
Luunch the restore..
And my screen is "blocked" from 5 hours on Install Zip 1 of 3.
"blocked" means doesn't move to the Zip2 but the clock is moving... the screen is locking itself after few seconds and I am able to unlock it...
Any idea how to exit properly ?
Click to expand...
Click to collapse
Hi, I've have successfully installed the last OTA update but not with zip file, instead I downloaded the factory image and flashed with fastboot boot.img and system.img (also vendor.img if you have one) then rebooted into TWRP and installed the lastest ElementalX and SuperSU.
I'm not sure but I think that factory image zip file are not installable via recovery but only with the flash-all that comes with them. This script use fastboot to flash everything you need of the factory image
You can find this procedure on the ElementalX website, here is the link hope it can help out: http://elementalx.org/how-to-install-android-monthly-security-updates/
Finally... I installed CM13 and ElementalX... in some minutes ...
I suppose the the problem was in my zip file...
Hi,
Just for you to know:
Model: r7plusf
Recovery: TWRP 3.0.2-0
----------------------------------------
So earlier today I did an OTA update (cm-14.1-20161205-NIGHTLY-r7plus.zip), but couldn't get my phone to boot.
So naturally, I tried wiping Cache and ART cache, but was still bootlooping.
Thought there might be someting wrong with my ROM and data, so I formated data and Installed ROM and GAPPS again after ADB pushing them onto my phone.
Now, and although CM14.1 and GAPPS are successfully installed on my Oppo R7 Plus, I can't boot into the OS. Every time I try reboot system, whether through POWER_BUTTON, RECOVERY or ADB, I just boot into Recovery.
Worst of all, for some unknown reason, I can't get into BOOTLOADER, neither through button combination, nor through Recovery nor ADB.
I found this article (http://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386) in the LG G3 thread about executing some shell commands, but I haven't tested testing it with my phone's variables because it might hard brick it...
Please Help!
[EDIT] I now have access to fastboot but still recovery looping like crazy.
I installed the same update via CyanDelta , worked like a charm ! hopefully you get back up and running.
[UPDATE] strangely I tried to flash stock recovery and boot CM13 and it worked!
Will try to flash twrp again and insall CM14
keep you up to date
Same thing happened to me! Where did you get a copy of the stock recovery? Link?
resverse said:
[UPDATE] strangely I tried to flash stock recovery and boot CM13 and it worked!
Will try to flash twrp again and insall CM14
keep you up to date
Click to expand...
Click to collapse
I had the same problem. Can't remember exactly how I resolved it. But I think, I use CM recovery to flash nightly. Then flash TWRP to flash gapps. For some strange reason, using CM recovery also show no enough disk space whenever I try to flash opengapps. But TWRP recovery can flash opengapps successfully.
Don't use the OTA, use adb sideload to flash the nightly next time. So far, adb sideload has not given me any issue to flash nightly.
Same problem...
I tried a lot of things nothing works and now I've installed the cm recovery but I have the "unauthorized phone" in terminal when I try to flash the ROM... I can do nothing because I can't enable the usb debugging. I don't know what to do.
If somebody can help I appreciate.
corbalan12 said:
Same problem...
I tried a lot of things nothing works and now I've installed the cm recovery but I have the "unauthorized phone" in terminal when I try to flash the ROM... I can do nothing because I can't enable the usb debugging. I don't know what to do.
If somebody can help I appreciate.
Click to expand...
Click to collapse
Since then I found how to fix it :
first of all I flashed cm13 through TWRP,
Then I flashed the stock recovery (Google it, I found it in OPPO forums) with fastboot,
After that I did a factory reset in the stock recovery,
Booted cm13 with stock recovery,
Then re-flashed TWRP,
From TWRP, I wiped both data and system partitions,
Then fresh installed cm14 and Gapps
And it worked!
Not sure if those are the exact steps I followed because all I did was a hole lot of messing around and trying absurd things out, but think this is how I fixed it.
Let me know if it worked for you or if you still can't fix your problem
Best of luck
Resverse
resverse said:
Since then I found how to fix it :
first of all I flashed cm13 through TWRP,
Then I flashed the stock recovery (Google it, I found it in OPPO forums) with fastboot,
After that I did a factory reset in the stock recovery,
Booted cm13 with stock recovery,
Then re-flashed TWRP,
From TWRP, I wiped both data and system partitions,
Then fresh installed cm14 and Gapps
And it worked!
Not sure if those are the exact steps I followed because all I did was a hole lot of messing around and trying absurd things out, but think this is how I fixed it.
Let me know if it worked for you or if you still can't fix your problem
Best of luck
Resverse
Click to expand...
Click to collapse
Thank you very much!!!! I'll try tomorrow and tell you.
I appreciate a lot!
First of all now works but to be honest, I don't know if the way I fix makes sense or if is correct but not for the same reason I do but I'll try to explain...
I had cm-14.1-20161218-NIGHTLY and I tried to update via OTA to 20161220 the phone reboot and I get the bootloop. The first I thought, install again the ROM making wipe data and blabla... nothing work.
I tried to "reflash" the recovery, nothing. Flashed cm recovery, it always gave me error trying to flash the rom. I tried to install with stock recovery, errors too.
I was reading hundred of post looking for my issues, device unauthorized, "error 7" in twrp... I was crazy.
At last I thought, I've been trying to install from SDcard, if I try to install from internal memory? and I install again the twrp to transfer the ROM and Gapps to the internal memory and... it worked!!!!
Long story but with happy ending.
Thank you for your help I appreciate and sorry for my english.First of all now works but to be honest, I don't know if the way I fix makes sense or if is correct but not for the same reason I do but I'll try to explain...
I had cm-14.1-20161218-NIGHTLY and I tried to update via OTA to 20161220 the phone reboot and I get the bootloop. The first I thought, install again the ROM making wipe data and blabla... nothing work.
I tried to "reflash" the recovery, nothing. Flashed cm recovery, it always gave me error trying to flash the rom. I tried to install with stock recovery, errors too.
I was reading hundred of post looking for my issues, device unauthorized, "error 7" in twrp... I was crazy.
At last I thought, I've been trying to install from SDcard, if I try to install from internal memory? and I install again the twrp to transfer the ROM and Gapps to the internal memory and... it worked!!!!
Long story but with happy ending.
Thank you for your help I appreciate and sorry for my english.
I hope someone reads this as I'm lost for ideas. First time trying to root a device, I'm using an s8+ and somehow managed to mess up installing twrp using Odin.
Now when I try to re flash twrp it comes up with error, 'only official released binaries are allowed to be flashed'. Also I think I managed to erase the recovery program that comes with the phone as when I try to boot in recovery it now comes up with error message 'No command'.
I have reinstalled the stock firmware using Odin but that hasn't fixed anything.
Anyone got any ideas or insite into this problem. Any advice would be very appreciated as I'm so keen to discover rooting!!
Philnicolls89 said:
I hope someone reads this as I'm lost for ideas. First time trying to root a device, I'm using an s8+ and somehow managed to mess up installing twrp using Odin.
Now when I try to re flash twrp it comes up with error, 'only official released binaries are allowed to be flashed'. Also I think I managed to erase the recovery program that comes with the phone as when I try to boot in recovery it now comes up with error message 'No command'.
I have reinstalled the stock firmware using Odin but that hasn't fixed anything.
Anyone got any ideas or insite into this problem. Any advice would be very appreciated as I'm so keen to discover rooting!!
Click to expand...
Click to collapse
Seeing No command is normal, with an icon of a dead android lol, thats stock recovery, blue screen, i got that all time, but after waiting about 30 seconds and pressing the buttons, i got the mnue to pop up to reset cache, reboot phone, wipe data etc.
As for TWRP, are you flashing the correct one, dream2lte??, download the latest one, the dream2lte.img .tar file, from the TWRP official website - - https://dl.twrp.me/dream2lte/twrp-3.3.1-0-dream2lte.img.tar.html.
I had this issue trying to flash TWRP with standard odin, i had to use a modded version of odin to flash it, even prince cosmy version didnt work for me.
I have attatched the ODIN i use, its a 7zip file.
Thank you, after trying a few more things the twrp file you gave me worked. I now have a fully rooted s8!!!! Your a legend.