Clock Work Recovery problem - Can't mount SD! - Nexus 5 Q&A, Help & Troubleshooting

I am using clockwork for my recovery and I have been getting an error while in recovery "can't mount SD". The problem is, when this happens I can not flash a rom, update Gapps, cant flash a nand back-up etc.. When this happens I will reboot my phone and sometimes after several hours many attempts I will try and it will work.
I have upgraded recovery I have downgraded recovery and still getting the same issue. My last thought is to go back to stock and start over. Any one know why I am getting this?

jdh10475 said:
I am using clockwork for my recovery and I have been getting an error while in recovery "can't mount SD". The problem is, when this happens I can not flash a rom, update Gapps, cant flash a nand back-up etc.. When this happens I will reboot my phone and sometimes after several hours many attempts I will try and it will work.
I have upgraded recovery I have downgraded recovery and still getting the same issue. My last thought is to go back to stock and start over. Any one know why I am getting this?
Click to expand...
Click to collapse
Flash via 'fastboot flash recovery recoveryname.img'
Have you tried twrp http://forum.xda-developers.com/showthread.php?t=2507851
or philz http://forum.xda-developers.com/showthread.php?t=2565174

GUGUITOMTG4 said:
Flash via 'fastboot flash recovery recoveryname.img'
Have you tried twrp http://forum.xda-developers.com/showthread.php?t=2507851
or philz http://forum.xda-developers.com/showthread.php?t=2565174
Click to expand...
Click to collapse
I tried to flash recovery with fastboot all went well but I wasn't able to access sd again. I ended up going stock with factory image and all is good now. Thanks for the heads-up on philz recovery I really like it.

Related

[Q] Red Triangle, Dead Android

After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
ttakacs said:
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
Click to expand...
Click to collapse
When you flashed to stock you erased your recovery.. Reconnect to your computer and push a recovery onto your phone and you're good to go..
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
ttakacs said:
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
Click to expand...
Click to collapse
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Setting.Out said:
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Click to expand...
Click to collapse
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
ttakacs said:
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
Click to expand...
Click to collapse
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Setting.Out said:
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
ttakacs said:
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
Click to expand...
Click to collapse
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Setting.Out said:
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Click to expand...
Click to collapse
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
ttakacs said:
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
Click to expand...
Click to collapse
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Sent from my Nexus S using xda premium
Setting.Out said:
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Click to expand...
Click to collapse
I am too. Every method known to me (Odin, fastboot, adb) to flash a ROM, whether custom or stock, has failed to boot. Thanks for hanging with me on this; if you can think of solution I'll be glad to have it. Or if I solve it, I'll post here.

Stuck in Fastboot

Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
also it says invalid "boot image header!" in red letters
http://forum.xda-developers.com/showthread.php?t=2542219
Install full factory image with fastboot.
P.Kosunen said:
http://forum.xda-developers.com/showthread.php?t=2542219
Install full factory image with fastboot.
Click to expand...
Click to collapse
Alright thankyou!
I got everything to work again but I still can't flash roms. They just bootloop :S
It could be too big recovery install with fastboot causes problem, every recovery cwm/twrp i tried to install with fastboot fails.
http://forum.xda-developers.com/showpost.php?p=49559872&postcount=234
Twrp_MotoG_signed_010814_163615.zip
Download vocoderisms TWRP build, extract "recovery.img" from it.
After you have kitkat installed and working:
Option 1, use TWRP without install:
Boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img) and install rom from there.
Option 2, install TWRP (have not tested):
Upload twrp zip to phone (adb push Twrp_MotoG_signed_010814_163615.zip /sdcard/), boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img), install Twrp_MotoG_signed_010814_163615.zip.
Misterowl said:
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B2LP8tI1Xwu4MGtPTlpVcVQxN0k/preview this cwm worked for me
You do know flashing stock again removes root, so it has to be rerooted again ?
aradalien said:
You do know flashing stock again removes root, so it has to be rerooted again ?
Click to expand...
Click to collapse
Yes I am very aware and followed through with root with that outcome.
kieranc88 said:
https://docs.google.com/file/d/0B2LP8tI1Xwu4MGtPTlpVcVQxN0k/preview this cwm worked for me
Click to expand...
Click to collapse
CWM doesn't work it. It boots up (Im used cyanogenmod) the cyanogenmod boot animation but just stays there.
P.Kosunen said:
It could be too big recovery install with fastboot causes problem, every recovery cwm/twrp i tried to install with fastboot fails.
http://forum.xda-developers.com/showpost.php?p=49559872&postcount=234
Twrp_MotoG_signed_010814_163615.zip
Download vocoderisms TWRP build, extract "recovery.img" from it.
After you have kitkat installed and working:
Option 1, use TWRP without install:
Boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img) and install rom from there.
Option 2, install TWRP (have not tested):
Upload twrp zip to phone (adb push Twrp_MotoG_signed_010814_163615.zip /sdcard/), boot to bootloader (adb reboot bootloader), boot twrp (fastboot boot recovery.img), install Twrp_MotoG_signed_010814_163615.zip.
Click to expand...
Click to collapse
I've flashed twrp too and came out with the same outcome.
stuck in fastboot
Misterowl said:
Okay so I tried to flash cyanogenmod 11 for the first time on this moto G (US). It bootlooped and I tired to reflash it again and it did the same. There was no way of returning to stock because I had not made a backup. So I tried to flash stock in the bootloader and that didn't work. I went into the recovery and it said 'cant mount /sdcard. So go back into the bootloader and format the sdcard and that doesn't work (which I returned to the recovery to see it not working). I go back and flash twrp thinking that recovery would have something to help me flash a new rom and now I don't even have a working recovery. It takes me straight back to the bootloader and every time I flash a recovery it says Mismatched partition size (recovery) and I am unable to boot into it.
I have no clue on what to do at this point and I need help.
Click to expand...
Click to collapse
Exactly i am also facing same problem....
mobile unable to instal firmware...
still i am searching for solution ...
guys plz help me
I thought I am the only one with this problem..After mailing the phone to SC and got it back after 2 months, the phone still looks the same, just like they did nothing to fix it.

fastboot flash rom

can i fastboot flash a rom or other zip? i've run into a problem after flashing a rom that wont boot and twrp wont mount data or my internal storage so i cant flash anything else. any help would be appretiated
I dont know how to do it, but have heard you can use the sideload feature of the twrp recovery to flash a rom. Or you could try flashing the new twrp recovery if your not on the new one. The new twrp 2.8.0.3 recovery was released on 9-30-14 last I checked its not updated on xda yet but you can get it on the twrp recovery web site which its on the link below, its the newest one on the bottom of the list.
http://techerrata.com/browse/twrp2/m8_wlv
reaper420 said:
can i fastboot flash a rom or other zip? i've run into a problem after flashing a rom that wont boot and twrp wont mount data or my internal storage so i cant flash anything else. any help would be appretiated
Click to expand...
Click to collapse
worse case scenario, run the RUU, fastboot flash recovery recovery.img then install ROM in recovery.
Honestly, you might as well apply the whole RUU and get yourself back to a working stock before putting another custom ROM back on. Follow the OP in this thread: http://forum.xda-developers.com/showthread.php?t=2873144
I tried every method possible and none worked, I recently cracked my screen so I just took this as a sign and went ahead and got it replaced with insurance. Thanks for all the suggestions
did your recovery constantly reboot into a white htc screen ?
jxcorex28 said:
did your recovery constantly reboot into a white htc screen ?
Click to expand...
Click to collapse
Are you using the correct Vzw version of twrp or cwm?

Can't Access TWRP Recovery

Hi guys, I flashed the latest factory image, then flashed the latest TWRP but can access it 1 out of 10 tries.. What am I doing wrong? Is it a faulty replacement phone? Never had this issue with my other nexus 5 (same recovery file but lollipop and not marshmallow) and now I have this problem.. Tried to riflashato the factory image 5 times, boot to recovery without installing but nothing changed.. Thanks in advance!
If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.
beekay201 said:
If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.
Click to expand...
Click to collapse
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..
carlese said:
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..
Click to expand...
Click to collapse
do you finde fix
slavisa037 said:
do you finde fix
Click to expand...
Click to collapse
Downloaded twrp again and used flashify..
carlese said:
Downloaded twrp again and used flashify..
Click to expand...
Click to collapse
This is not really a fix, since to use Flashify one needs to be rooted already.
What I did to work around this was reflash LMY48M. After reflashing that, fastboot correctly boots/flashes twrp.
I've read that the issue arises when trying to boot and/or flash twrp with MRA56K installed, AND the device is connected to USB.
Ok, i got some of problems here, i tryied to root my Nexus 5 with other Android 6 version, it was the first one launched after development version. Now i have MRA58K version.
Problem 1 : I have no stock recovery, i first rooted original version of Marshmallow with CWM and i soft bricked, so no backup, no factory images. Installed MRA58K and there is no stock recovery, thanks god i can use bootloader. I can install TWRP, but i want to install the old recovery, Tell me how to do it.
Problem 2: Actual version of Marshmallow ask me to install a patch, but when installing i got stuck in TWRP, it cant install it (yes, android was rooted, but i installed twrp before root, and the update were before it.)
Thanks.
You can flash a stock ROM using the flash-all file in a command prompt. This will install stock ROM with stock recovery. Make sure the phone has an unlocked bootloader and you should be fine.
Official OTA updates cannot be installed with a custom recovery.
I tryied 3 times to install OS with flash-all. All the problems start after i installed CWM and try to root the phone, but after that, i used a stock rom image that was different build than actually one.
I`m not sure yet who`s fault is.
Any ideas?
I don't recommend using CWM, only TWRP.
After you flash TWRP always boot into it, and since you're flashing a custom recovery I'm going to assume you don't care about OTA's, swipe to allow system to be mounted. TWRP will automatically patch the system to survive android trying to overwrite it. Reboot into TWRP a second time to be safe. TWRP should stick from now on until you flash over it or restore stock system partition.
Yes, now i have TWRP as recovery, but i want to replace it with stock recovery.
Problem is, when i upload stock recovery and try to boot in recovery mode, i got the green dead android with red triangle.
But after TWRP uploading and booting in recovery mode, TWRP is there..
I really don`t know what`s wrong.
Flash stock recovery, select recovery from the fastboot menu, hold the power button and press volume up button.

[HELP] Stuck on Recovery Bootloop after OTA Update (CM14.1) , can't access Fastboot

Hi,
Just for you to know:
Model: r7plusf
Recovery: TWRP 3.0.2-0
----------------------------------------
So earlier today I did an OTA update (cm-14.1-20161205-NIGHTLY-r7plus.zip), but couldn't get my phone to boot.
So naturally, I tried wiping Cache and ART cache, but was still bootlooping.
Thought there might be someting wrong with my ROM and data, so I formated data and Installed ROM and GAPPS again after ADB pushing them onto my phone.
Now, and although CM14.1 and GAPPS are successfully installed on my Oppo R7 Plus, I can't boot into the OS. Every time I try reboot system, whether through POWER_BUTTON, RECOVERY or ADB, I just boot into Recovery.
Worst of all, for some unknown reason, I can't get into BOOTLOADER, neither through button combination, nor through Recovery nor ADB.
I found this article (http://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386) in the LG G3 thread about executing some shell commands, but I haven't tested testing it with my phone's variables because it might hard brick it...
Please Help!
[EDIT] I now have access to fastboot but still recovery looping like crazy.
I installed the same update via CyanDelta , worked like a charm ! hopefully you get back up and running.
[UPDATE] strangely I tried to flash stock recovery and boot CM13 and it worked!
Will try to flash twrp again and insall CM14
keep you up to date
Same thing happened to me! Where did you get a copy of the stock recovery? Link?
resverse said:
[UPDATE] strangely I tried to flash stock recovery and boot CM13 and it worked!
Will try to flash twrp again and insall CM14
keep you up to date
Click to expand...
Click to collapse
I had the same problem. Can't remember exactly how I resolved it. But I think, I use CM recovery to flash nightly. Then flash TWRP to flash gapps. For some strange reason, using CM recovery also show no enough disk space whenever I try to flash opengapps. But TWRP recovery can flash opengapps successfully.
Don't use the OTA, use adb sideload to flash the nightly next time. So far, adb sideload has not given me any issue to flash nightly.
Same problem...
I tried a lot of things nothing works and now I've installed the cm recovery but I have the "unauthorized phone" in terminal when I try to flash the ROM... I can do nothing because I can't enable the usb debugging. I don't know what to do.
If somebody can help I appreciate.
corbalan12 said:
Same problem...
I tried a lot of things nothing works and now I've installed the cm recovery but I have the "unauthorized phone" in terminal when I try to flash the ROM... I can do nothing because I can't enable the usb debugging. I don't know what to do.
If somebody can help I appreciate.
Click to expand...
Click to collapse
Since then I found how to fix it :
first of all I flashed cm13 through TWRP,
Then I flashed the stock recovery (Google it, I found it in OPPO forums) with fastboot,
After that I did a factory reset in the stock recovery,
Booted cm13 with stock recovery,
Then re-flashed TWRP,
From TWRP, I wiped both data and system partitions,
Then fresh installed cm14 and Gapps
And it worked!
Not sure if those are the exact steps I followed because all I did was a hole lot of messing around and trying absurd things out, but think this is how I fixed it.
Let me know if it worked for you or if you still can't fix your problem
Best of luck
Resverse
resverse said:
Since then I found how to fix it :
first of all I flashed cm13 through TWRP,
Then I flashed the stock recovery (Google it, I found it in OPPO forums) with fastboot,
After that I did a factory reset in the stock recovery,
Booted cm13 with stock recovery,
Then re-flashed TWRP,
From TWRP, I wiped both data and system partitions,
Then fresh installed cm14 and Gapps
And it worked!
Not sure if those are the exact steps I followed because all I did was a hole lot of messing around and trying absurd things out, but think this is how I fixed it.
Let me know if it worked for you or if you still can't fix your problem
Best of luck
Resverse
Click to expand...
Click to collapse
Thank you very much!!!! I'll try tomorrow and tell you.
I appreciate a lot!
First of all now works but to be honest, I don't know if the way I fix makes sense or if is correct but not for the same reason I do but I'll try to explain...
I had cm-14.1-20161218-NIGHTLY and I tried to update via OTA to 20161220 the phone reboot and I get the bootloop. The first I thought, install again the ROM making wipe data and blabla... nothing work.
I tried to "reflash" the recovery, nothing. Flashed cm recovery, it always gave me error trying to flash the rom. I tried to install with stock recovery, errors too.
I was reading hundred of post looking for my issues, device unauthorized, "error 7" in twrp... I was crazy.
At last I thought, I've been trying to install from SDcard, if I try to install from internal memory? and I install again the twrp to transfer the ROM and Gapps to the internal memory and... it worked!!!!
Long story but with happy ending.
Thank you for your help I appreciate and sorry for my english.First of all now works but to be honest, I don't know if the way I fix makes sense or if is correct but not for the same reason I do but I'll try to explain...
I had cm-14.1-20161218-NIGHTLY and I tried to update via OTA to 20161220 the phone reboot and I get the bootloop. The first I thought, install again the ROM making wipe data and blabla... nothing work.
I tried to "reflash" the recovery, nothing. Flashed cm recovery, it always gave me error trying to flash the rom. I tried to install with stock recovery, errors too.
I was reading hundred of post looking for my issues, device unauthorized, "error 7" in twrp... I was crazy.
At last I thought, I've been trying to install from SDcard, if I try to install from internal memory? and I install again the twrp to transfer the ROM and Gapps to the internal memory and... it worked!!!!
Long story but with happy ending.
Thank you for your help I appreciate and sorry for my english.

Categories

Resources