Database Info

My su 760 never shows edge in data connectivity

have a problem with my mobile plz anyone, need
help.
my su 760 only shows G or 3g when i activate data
connectivity. i though this is not a problem.
3g data speed is not a problem its download speed is
near to 1mb.
but in gsm area gsm DL speed is 5 kbps.
i never found my mobile connects to edge network.
why i cant connect it to edge network. edge's DL speed
is near to 15 kbps.
one of my friends have a lg l7 mobile.! but it connects
to edge network without any problem and its DL speed
more than 15 kbps.
on the same place my su 760 and friend's l7 chooses
gsm and edge. why why why............!
its too hard to feel this problem.
whats the matter. even su 760's specs says it has edge
support even pc dongles are uses edge in my area.
i tryed to change gsm network prequs in hidden menu
but it only changes to gsm only not to edge.
need help please.

any one
even a suggestion please. any one.
please please please.
i need to fix my mobile.

Try another baseband perhaps?

didn't work
drastic00 said:
Try another baseband perhaps?
Click to expand...
Click to collapse
i flased XBSA404_CP.fls using lg flash tool. but its not working. i tryed p 920 20a too and after it mobile restarts every 1 minite.
these bbs never shows me edge signal mark. g only in notification area.
can u suggest me a bb with full edge support.
when i flash bb using lg flash tool. IT stops in 20% saying AP didnd found.
DO I NEED TO FLASH BBS WITH AP.BIN FILE
if i do it, i know my mobile will flash whole firmware too.
how to do theese steps. (need a guide)
and also after flashing basebands my phone didnt change bb name in settings. why.?
my mobile shows bb is "xmm6260".even after flashing fls files. i dont know whats the problem.
su760 s***s.

If you mean 4G, that requires a certain combination of baseband and firmware. For example, on my P925 with xbsall's VX3D ROM (v30A US firmware) and the P925 (Thrill) baseband I would see the 4G data icon in status bar. However, that is not his best ROM, and I honestly do not find a noticeable difference between supposed 4G and H+ speed (but I have not taken measurements to know for sure).
Incomplete flash is likely due to incorrect driver install for your pc/phone. Check my guide, step 1, for that, and be sure to pay close attention to all details:
http://forum.xda-developers.com/showthread.php?p=45600409
It can be tricky the first or second time you do it, and that is why I tried to put so much detail into the instructions.
Something odd is going on right now with the forums; I can't copy the link to the guide without xda app crashing, so just go to first post of the thread, part 1. You will need firmware/baseband (i.e. the correct .bin and .fls files) for SU760 (I don't have that phone), but driver install on pc is the same, from what I have read.
Good Luck!!!

yes senior i have all the files (mobile drivers,v30b ics fls and bin, model dll - but its froyo one, and xbs large partition's fls too)
can u flash bb without .bin using lg flash to p925.?
i have flashed xball large partion. but its camera upside down and back key not working. when it flashed i have show e on notification when connects to net.
i'll try xbs's fls with stock bin file. (full flash)
thanks.

Yes, baseband can be flashed separately.
You have the same bugs P920 users had when the only ICS available was ported from SU760...you need an ICS .bin specific to SU760; someplace there ought to be one, but I don't know where.
For signal, you probably need to set up your APN.

drastic00 said:
Yes, baseband can be flashed separately.
You have the same bugs P920 users had when the only ICS available was ported from SU760...you need an ICS .bin specific to SU760; someplace there ought to be one, but I don't know where.
For signal, you probably need to set up your APN.
Click to expand...
Click to collapse
I have bin and fls files and those are official for su760 not for p920.
I don't know what's the problem. I have a working net connection and I have set apn too.
can u suggest me a bb for official ics v30b.
thanks senior

??? You said you flashed xbsall's files. Those are for P920/P925.
Basebands for different countries are linked in the guide.

drastic00 said:
??? You said you flashed xbsall's files. Those are for P920/P925.
Basebands for different countries are linked in the guide.
Click to expand...
Click to collapse
ya ya its true. I flased the xball's large patition but its for p920 I experianzed many problems after that.
but I have show e on notification bar. that's the reason I flashed xball's fls to my stock.
but that seems not working.
do u know a bb for p925 ics asia pasific or p920 bb.?
thaks senior

drastic00 said:
??? You said you flashed xbsall's files. Those are for P920/P925.
Basebands for different countries are linked in the guide.
Click to expand...
Click to collapse
LGP920AT-00-V20b-ESA-XXX-JAN-10-2012+0_CP.fls
will this work in su760 and is it asia pasific one.?

imlop said:
have a problem with my mobile plz anyone, need
help.
my su 760 only shows G or 3g when i activate data
connectivity. i though this is not a problem.
3g data speed is not a problem its download speed is
near to 1mb.
but in gsm area gsm DL speed is 5 kbps.
i never found my mobile connects to edge network.
why i cant connect it to edge network. edge's DL speed
is near to 15 kbps.
one of my friends have a lg l7 mobile.! but it connects
to edge network without any problem and its DL speed
more than 15 kbps.
on the same place my su 760 and friend's l7 chooses
gsm and edge. why why why............!
its too hard to feel this problem.
whats the matter. even su 760's specs says it has edge
support even pc dongles are uses edge in my area.
i tryed to change gsm network prequs in hidden menu
but it only changes to gsm only not to edge.
need help please.
Click to expand...
Click to collapse
Recently it came V30B for Su760. So... probably you should flash it. Take a look here:
http://lg-phone-firmware.com/index.php?id_mod=2

p-vlad said:
Recently it came V30B for Su760. So... probably you should flash it. Take a look here:
http://lg-phone-firmware.com/index.php?id_mod=2
Click to expand...
Click to collapse
yes sir I alredy got it. (PICTURE'S NO: 2)
"pls take look at the picture"
now I'm in xball's XBSA404_CP.fls baseband but its not giving me EDGE only gsm and 3g.
wcdma only works on 2100 mhz
gsm works on 900,1900 mhz
other gsm and wcdma bands not working.
my stock v30b bb can access gsm 850 too but non of these basebands can't give me edge support. :'(
I have flashed XBSA404_CP.fls and p920's v20a stock fls. but non of them changed baseband's name in settings/software info (PIC'S NO:1)
WHAT'S THE PROBLEM. I USED LG FLSH TOOL TO FLASH FLS FILES WITH SU 760 FROYO MODEL.DLL
my next try is p920's "LGP920AT-00-V20b-ESA-XXX-JAN-10-2012+0_CP.fls"
I think it's a asia pasific BB.

imlop said:
yes sir I alredy got it. (PICTURE'S NO: 2)
"pls take look at the picture"
now I'm in xball's XBSA404_CP.fls baseband but its not giving me EDGE only gsm and 3g.
wcdma only works on 2100 mhz
gsm works on 900,1900 mhz
other gsm and wcdma bands not working.
my stock v30b bb can access gsm 850 too but non of these basebands can't give me edge support. :'(
I have flashed XBSA404_CP.fls and p920's v20a stock fls. but non of them changed baseband's name in settings/software info (PIC'S NO:1)
WHAT'S THE PROBLEM. I USED LG FLSH TOOL TO FLASH FLS FILES WITH SU 760 FROYO MODEL.DLL
my next try is p920's "LGP920AT-00-V20b-ESA-XXX-JAN-10-2012+0_CP.fls"
I think it's a asia pasific BB.
Click to expand...
Click to collapse
help plz

Did you try the .dll linked in the guide (P920) .dll?

drastic00 said:
Did you try the .dll linked in the guide (P920) .dll?
Click to expand...
Click to collapse
I didn't. can u flash ur mobile with another mobile's dll. i think it will reject by lg flash tool.
I afraid that will brick my mobile.

I actually have no idea. This is unknown territory for me. I am surprised the P920 files worked at all. I suppose you could try it and if it bricks you could flash it back, but that would be at your risk.

drastic00 said:
I actually have no idea. This is unknown territory for me. I am surprised the P920 files worked at all. I suppose you could try it and if it bricks you could flash it back, but that would be at your risk.
Click to expand...
Click to collapse
yes for sure. ill try senior,
I don't think about bricks cos I have every things for re flashing. I allredy bricked it more than 10 times
I'm in a tamil language course now. am going this Friday home for weekend. ill try all of the ways then.
but I have a big problem.
I reflashed my mobile severel times using 5 pcs. but after the require software (lg flash tool. mobile drivers. omap boot) installation every pcs full of viruses. every exe file was attacked by it and if I scan pc from v guard all exes files are deletes by vg saying all are infected.
even if I install those softwares to pc while VG runs. v guard don't give permission to install them. only they deletes.
kaspersky. avest both are recognizes all those software are viruses.
I download all files from xda. dev host. lg firmwares and lg official site. what's the problem.

Some of that stuff contains system level files that can be mistaken by antivirus software as harmful or potentially harmful.

drastic00 said:
Some of that stuff contains system level files that can be mistaken by antivirus software as harmful or potentially harmful.
then why vg delete all exe files telling that all are affected. even my friend's self extract zipped exe files are deleted (those are his and his gf's videos. lol
and also if I insert a pen drive to pc then two files automatically copies to it. one is exe and other one pff or pfd (I don't remember).
but computers didn't have any problems with os. they all are fine even till now. but every other exe are deleted. (software setup files, installed software's exes like ms office other application softawares). no problem with v guard's exes. it copies to every. partitions too.
Click to expand...
Click to collapse

ATT LG Optimus e970 brick need fix :(

My LG e970 got brick by using ROM manager. I went into recovery mode and it stucks on LG logo.
It is going in Download Mode but dont know its purpose.
I have search the forum it says use LGNPST. now i have LGNPST and also Stock rom.
Getting the Model error. May be i have the wrong dll file. its LGNPST_LS970.dll dnt whether it is the right file or not.
Please provide solution to revive my mobile .
Thanks in advance.
I dnt remember the IMEI number nor do I have the mobile box. Stuck with a Brick.

I am not too familiar with that model, but your IMEI should be under the battery. Should be a sticker. There is most likely a newer dll file you can use and make sure that you are using a USB 2.0 port. Some users said somewhere that they has issues on a 3.0 port.

[Q] Help! I can't use my LG LU6200.

I need help in returning my device to work. Can anybody help me? It's An LG Optimus LTE (LU6200) Korean version.
Problem:
Touchscreen doesn't work, So the solution that I made was to buy a new digitizer/touchscreen for my device but no response. My phone's touchscreen still doesn't work. (Note: The digitizer/touchscreen i bought worked in other same device but not mine).
Then I tried flashing stock rom (note: KDZ file) still doesn't work. I even tried flashing an ICS file Engineer Version But same problem...
Can anybody help me. :crying::crying:

blank1134 said:
I need help in returning my device to work. Can anybody help me? It's An LG Optimus LTE (LU6200) Korean version.
Problem:
Touchscreen doesn't work, So the solution that I made was to buy a new digitizer/touchscreen for my device but no response. My phone's touchscreen still doesn't work. (Note: The digitizer/touchscreen i bought worked in other same device but not mine).
Then I tried flashing stock rom (note: KDZ file) still doesn't work. I even tried flashing an ICS file Engineer Version But same problem...
Can anybody help me. :crying::crying:
Click to expand...
Click to collapse
Try flashing Stock rom with new touch screen installed... else check for the ic

[Q] H955 Rom on F510L

Hi guys,
So here is my question, I got a LG G Flex 2 F510L from south Korea. And I wanted to know if it would be possible to switch the ROM for the H955 (which is the version currently sell in France) (because yeah I'm french ) since they got basically the same hardware...
And I don't want to test it myself because there is no custom recovery yet if I make a mistake etc... So, what do you guys think of my idea ?

It would work flashing it onto your phone, it would perform just like any other android smart phone, presuming they have the same specs. For example, if you flashed one of the h955's that only have 16gb's of memory, it would show in your storage that you only have 8 gb's or so remaining due to the system taking up 23 (in actuality it only uses 9, but it thinks it only has 16.) HOWEVER, even though it would perform just like an android smart phone, it would act like one, but without being capable of using your sim card, until you went back to stock. From what I understand, unless the phone, like the rom you flash, is unlocked, then your phone carrier won't be able to be used on that rom, as it's french, and not south korean. I would say try it, after you get the stock rom to re-flash yours if anything occurs. Don't be stuck like me, waiting for the h950 rom to appear, so I can fix my phone from being incapable of making calls. :crying::crying::crying:
Good luck!

So from what I understand, you tried it but your phone wasn't unlocked ?
Mine is free SIM so it should works... Unfortunately I couldn't find stock ROM for the F510L :crying:

I'm under the impression that even if it's unlocked prior to the flash, it would require another. I can't confirm nor deny this, but I would just wait until your specified stock is released on here.

Alright, I've found this but not sure if this is the entire ROM since it's named "system" and that's not a .kdz or even a .tot
I'll try to unzip it to see what it is exactly, and if it's my ROM, then I'll test the H955 ROM and let you know

So obviously it was just the "system" partition extracted and not the file dump that I need

Well, good effort at least. Eventually, you'll get your hands on it! Good luck.

Thx you sir, hope you'll find yours too

that's a good idea
Drissouille said:
Hi guys,
So here is my question, I got a LG G Flex 2 F510L from south Korea. And I wanted to know if it would be possible to switch the ROM for the H955 (which is the version currently sell in France) (because yeah I'm french ) since they got basically the same hardware...
And I don't want to test it myself because there is no custom recovery yet if I make a mistake etc... So, what do you guys think of my idea ?
Click to expand...
Click to collapse
I have taken your idea and now I have a brick:good:

ngheokieumy said:
I have taken your idea and now I have a brick:good:
Click to expand...
Click to collapse
Ouch Why did you do that without any possibilities to do a Nandroid backup ? :/

Drissouille said:
Ouch Why did you do that without any possibilities to do a Nandroid backup ? :/
Click to expand...
Click to collapse
backup by faith ???

ngheokieumy said:
backup by faith ???
Click to expand...
Click to collapse
You don't get it...
I said that we couldn't do a backup since my first post, so why did you do that ?
Not my fault if you bricked your phone, even if I'm truly sorry for you :/

Drissouille said:
You don't get it...
I said that we couldn't do a backup since my first post, so why did you do that ?
Not my fault if you bricked your phone, even if I'm truly sorry for you :/
Click to expand...
Click to collapse
My brick was revived when I up firmware H959 of Taiwan :laugh::victory:

Bravo !
From the original F510L rom, can you see any differences ? Improvements ?
I'm just wondering if it's worth it since my phone isn't bricked at all but still a little laggy sometimes

Drissouille said:
Bravo !
From the original F510L rom, can you see any differences ? Improvements ?
I'm just wondering if it's worth it since my phone isn't bricked at all but still a little laggy sometimes
Click to expand...
Click to collapse
Can you point me to a guide used to flash?

hbcdfpq said:
Can you point me to a guide used to flash?
Click to expand...
Click to collapse
You can follow this tutorial even if it's for the g3 it should work the same

Thanks. I was able to update to the H959 10D
However I now get the message 'CURRENT VERSION IS NOT AVAILABLE FOR USER' every time I boot. Doesn't seem to affect anything though. Does anyone have any idea what this means?
Surprisingly though even though this rom has no bloatware to me it's slower than the Rom I had previously (I had an f510S branded to SK TELECOM)
With my previous rom It would only disable cores 4, 7 when things heat up.. but with this firmware it also disables 5+6 as well.
If someone uploads a KDZ for the Korean model i'd probably go back... It seems that LG releases updates for the Korean model first as I was on 10i and could have updated to 15B while everyone else is on 10D and 10e.

hbcdfpq said:
Thanks. I was able to update to the H959 10D
However I now get the message 'CURRENT VERSION IS NOT AVAILABLE FOR USER' every time I boot. Doesn't seem to affect anything though. Does anyone have any idea what this means?
Surprisingly though even though this rom has no bloatware to me it's slower than the Rom I had previously (I had an f510S branded to SK TELECOM)
With my previous rom It would only disable cores 4, 7 when things heat up.. but with this firmware it also disables 5+6 as well.
If someone uploads a KDZ for the Korean model i'd probably go back... It seems that LG releases updates for the Korean model first as I was on 10i and could have updated to 15B while everyone else is on 10D and 10e.
Click to expand...
Click to collapse
Thx for sharing your experience with us !
Mine is a F510L branded to U+ but I'm stuck on 10e since I rooted my phone because the update is forbidden for rooted users even if I unroot my phone with SuperSU.
There is no F510S KDZ so far from what I know sorry

The H955 rom does not work at all on the f510s. I am not sure why
The flashing process goes perfectly, but for some reason there is no cellular service whatsoever.

hbcdfpq said:
The H955 rom does not work at all on the f510s. I am not sure why
The flashing process goes perfectly, but for some reason there is no cellular service whatsoever.
Click to expand...
Click to collapse
I guess H955 and H959 don't have the same radio so no cellular service.
Some users got the 5.1.1 update for both F510S and F510L.. Hopefully they'll find a way dor sharing a .kdz with us

f350l is bricked by flashing 838 kdz

Hey guys i was converting my phon to 838 32 gb
..i tried to flash 838 kdz...on pc the flashtool get hangs on 19 percent..the phone shows 13 percent...the progress bar repeat 3 times from zero to 13 on phone...i tried every method but flashtool get stop at 19 nd gave me error phone disconected..
So i downloaded tot file for my f350l...it gaves me cross dll error...my phone is bricked now...wat to do now plzz guys ..u guys r my last hope..i m trying from last one week but no luck...
I have tried 838 lolipop kitkat kdz...
F350l lolypop kdz nd kitkat kdz
Tried cdma 3gqct diag cs emergency every mod
Tried to edit kdz wth hexediter..but dnt know if it was correct.....
Can i try f350l tot wth 838 dll??
Or can u guys gave me link of universal dll file??
Belive me i hav google alots..but because of weak english i cnt find wat i need...
Seems like my phone is paper weight anymore

ejazkhan said:
Hey guys i was converting my phon to 838 32 gb
..i tried to flash 838 kdz...on pc the flashtool get hangs on 19 percent..the phone shows 13 percent...the progress bar repeat 3 times from zero to 13 on phone...i tried every method but flashtool get stop at 19 nd gave me error phone disconected..
So i downloaded tot file for my f350l...it gaves me cross dll error...my phone is bricked now...wat to do now plzz guys ..u guys r my last hope..i m trying from last one week but no luck...
Click to expand...
Click to collapse
Try to flash the original F350L firmware (KDZ) of your device. The F350L TOT file will not work since you already re-written the build prop on your device from F350L to 838 that is why you are being getting the cross dll error.

tried it
zyper95 said:
Try to flash the original F350L firmware (KDZ) of your device. The F350L TOT file will not work since you already re-written the build prop on your device from F350L to 838 that is why you are being getting the cross dll error.
Click to expand...
Click to collapse
sir i hav already tried to flash f350l lolypop kdz...it get fail in 2 percent again nd again....

ejazkhann said:
sir i hav already tried to flash f350l lolypop kdz...it get fail in 2 percent again nd again....
Click to expand...
Click to collapse
Try again the TOT file. In the Action Mode settings mark Board DL instead of Upgrade DL.

ok lemme try
zyper95 said:
Try again the TOT file. In the Action Mode settings mark Board DL instead of Upgrade DL.
Click to expand...
Click to collapse
ok lemme try....lg support tool also get fails in 2 percent
---------- Post added at 05:38 AM ---------- Previous post was at 05:30 AM ----------
zyper95 said:
Try again the TOT file. In the Action Mode settings mark Board DL instead of Upgrade DL.
Click to expand...
Click to collapse
tot failed again ......in board dl..........still cross dll error

ejazkhann said:
ok lemme try....lg support tool also get fails in 2 percent
---------- Post added at 05:38 AM ---------- Previous post was at 05:30 AM ----------
tot failed again ......in board dl..........still cross dll error
Click to expand...
Click to collapse
The last possible solution is using Hexeditor to edit the TOT file. This is quite tricky you may need to look for post here on how to edit TOT file.

ok
Buddy can u send me the link i m tried alots but got not find exact method....
Btw bro do u think it can be fixed by boxes etc

I hav to edit tot nd dll ?? Or just tot??

Please guys any guide etc??? To much helpless.

ejazkhan said:
I hav to edit tot nd dll ?? Or just tot??
Click to expand...
Click to collapse
Just the TOT. You need to download the original TOT file of LG F350L then you need to edit it using Hexeditor to make it D838 then flash it. The problem is that when you attempted to install D838 firmware it already re-write your phone model to D838 that is why it is no longer recognize as F350. You can try following the steps here. If that doesn't work, try to download the TOT file for D838 and use that to flash on your device since the TOT for F350 no longer works for you. By the way if you download the TOT for D838 check first and get the correct one for your phone if it is for 16GB or 32GB model. I think for F350L it is a 32GB model.

http://lg-phone-firmware.com/mobile...bile/mobile/firmware-LG+G+Pro+2-Tutti-62.html

Hy my lg g pro only blinks the light now...wat to do?

ejazkhan said:
http://lg-phone-firmware.com/mobile...bile/mobile/firmware-LG+G+Pro+2-Tutti-62.html
Click to expand...
Click to collapse
Do you have download mode access?

zyper95 said:
Just the TOT. You need to download the original TOT file of LG F350L then you need to edit it using Hexeditor to make it D838 then flash it. The problem is that when you attempted to install D838 firmware it already re-write your phone model to D838 that is why it is no longer recognize as F350. You can try following the steps here. If that doesn't work, try to download the TOT file for D838 and use that to flash on your device since the TOT for F350 no longer works for you. By the way if you download the TOT for D838 check first and get the correct one for your phone if it is for 16GB or 32GB model. I think for F350L it is a 32GB model.
Click to expand...
Click to collapse
mohsin931 said:
Do you have download mode access?
Click to expand...
Click to collapse
No bro.....i dnt have any access to download mod..phone doesnot boot now

ejazkhan said:
No bro.....i dnt have any access to download mod..phone doesnot boot now
Click to expand...
Click to collapse
where you live?
if in lahore then there is a shop in hafeez center which can install software on your mobile even if it is not booting

mohsin931 said:
where you live?
if in lahore then there is a shop in hafeez center which can install software on your mobile even if it is not booting
Click to expand...
Click to collapse
Im from peshawar bro....i managed to get into qhsusb mod...but i dnt know now how to get files for boarddiag..nd which one version i should use lol

ejazkhan said:
Im from peshawar bro....i managed to get into qhsusb mod...but i dnt know now how to get files for boarddiag..nd which one version i should use lol
Click to expand...
Click to collapse
you will get files from f350 tot file here is the method http://www.lgbbs.com:41/thread-925-1-1.html

mohsin931 said:
you will get files from f350 tot file here is the method http://www.lgbbs.com:41/thread-925-1-1.html
Click to expand...
Click to collapse
Mohsin yara i hav downloaded almost every version of board diag..but i cnt see g pro 2 in any version..im going to use g2 as chipset..hope it will work...any sugestion?

ejazkhan said:
Mohsin yara i hav downloaded almost every version of board diag..but i cnt see g pro 2 in any version..im going to use g2 as chipset..hope it will work...any sugestion?
Click to expand...
Click to collapse
different people have developed support for different models the one i shared contains file for g pro 2 but they demand some credit before i can download

mohsin931 said:
different people have developed support for different models the one i shared contains file for g pro 2 but they demand some credit before i can download
Click to expand...
Click to collapse
I m backed wth new problm..i got my phone working...used for 1 day..tried to hard reset..new era of problms brgun....phone brick ho gaya...kdz tot flash karny k bad..phon on ho jata hy..factory reseting ka screen ajata hy ..phone reboot hojata hy lg logo ajata hy..pher reboot or lg rrseting screen...it goes on