My LG e970 got brick by using ROM manager. I went into recovery mode and it stucks on LG logo.
It is going in Download Mode but dont know its purpose.
I have search the forum it says use LGNPST. now i have LGNPST and also Stock rom.
Getting the Model error. May be i have the wrong dll file. its LGNPST_LS970.dll dnt whether it is the right file or not.
Please provide solution to revive my mobile .
Thanks in advance.
I dnt remember the IMEI number nor do I have the mobile box. Stuck with a Brick.
I am not too familiar with that model, but your IMEI should be under the battery. Should be a sticker. There is most likely a newer dll file you can use and make sure that you are using a USB 2.0 port. Some users said somewhere that they has issues on a 3.0 port.
Related
my phone which was a p999 completely bricked and I used the Nvflash to restore it, I didn't know that my phone was a p999. I thought it was a p990 because wind advertises it as it is a p990. So I Nvflashed the phone to a p990 and now I have no connection to the network and many apps don't even work properly. Is there anyway to revert back to p999?
ALZXD said:
my phone which was a p999 completely bricked and I used the Nvflash to restore it, I didn't know that my phone was a p999. I thought it was a p990 because wind advertises it as it is a p990. So I Nvflashed the phone to a p990 and now I have no connection to the network and many apps don't even work properly. Is there anyway to revert back to p999?
Click to expand...
Click to collapse
If it was completely bricked, then there would have been no chance of reviving it. Just wondering.
_____
sent from my calculator with android.
If it is indeed a p999 model, why don't you just flash a ROM made for the G2x?
jamadio said:
If it is indeed a p999 model, why don't you just flash a ROM made for the G2x?
Click to expand...
Click to collapse
JUST did that and it worked like a charm, I can't believe my service is also up and running. I live in Canada (Toronto), so anyone that lives here use the link below and everything will be alright
http://forum.xda-developers.com/showthread.php?t=1248644
Wind Mobile does not advertise it as a P990. They advertise it as an LG 2X, which it is. Only T-Mobile USA is legally allowed to use the "G2X" name. The LG 2X comes in three hardware version, P990, P999 and SU660. You need to make sure which hardware version you have before you flash any rom. Currently there is no way to fix what you did. You have corrupted the baseband code with the P990 baseband code which uses an Infineon baseband chip and is not compatible with the Qualcomm baseband chip in the P999. At this time nobody has come up with a way to flash the correct baseband to the device. The only thing you can try is to find the thread about using KDZ method to reflash the phone. If you are lucky that might restore everythng including your baseband. You need to search the forums for this method.
hi
i'm working with gsm phones.
today came in shop lg p999 with imei missing, firmware cyanogen.
if nvram is corupted network will not work.
tomorow i will dump firmware with jtag. i will try to reconstruct firmware from another dump with boot erased but with nvram ok.
i will tell if i succeed.
where are you from?
usernome said:
i'm working with gsm phones.
today came in shop lg p999 with imei missing, firmware cyanogen.
if nvram is corupted network will not work.
tomorow i will dump firmware with jtag. i will try to reconstruct firmware from another dump with boot erased but with nvram ok.
i will tell if i succeed.
where are you from?
Click to expand...
Click to collapse
If you dump nvram from one phone and flash it to another, you will most likely then need to do an IMEI repair, because I believe that is where the IMEI is stored along with the network lock/unlock status.
His problem though is that he flashed the wrong baseband to the phone and changed the partitioning. You will need to restore the P999 parition structure and somehow flash the correct baseband to the phone, which nobody has succeeded in doing yet.
i try to find jtag conector but is very small and can't find one to place easy.
only solution is to solder wires. is not first one i connect to jtag. the last one was p500 and this one have another type conector for jtag. for another phones have jig testpoint but for lg can't find.
i have very skilled electronic hand. i'm doing this job for many years, my friend is make a very known gsm box.
we know what we are doing and will repair that. , if you see i'm very confident.
don't have very much time to work at this project.
bye.
usernome said:
i try to find jtag conector but is very small and can't find one to place easy.
only solution is to solder wires. is not first one i connect to jtag. the last one was p500 and this one have another type conector for jtag. for another phones have jig testpoint but for lg can't find.
i have very skilled electronic hand. i'm doing this job for many years, my friend is make a very known gsm box.
we know what we are doing and will repair that. , if you see i'm very confident.
don't have very much time to work at this project.
bye.
Click to expand...
Click to collapse
Samsung Galaxy S phones are the same way. Most variants don't have a jtag header and have very small solder pads. You need a very skilled hand to solder to them.
I need help in returning my device to work. Can anybody help me? It's An LG Optimus LTE (LU6200) Korean version.
Problem:
Touchscreen doesn't work, So the solution that I made was to buy a new digitizer/touchscreen for my device but no response. My phone's touchscreen still doesn't work. (Note: The digitizer/touchscreen i bought worked in other same device but not mine).
Then I tried flashing stock rom (note: KDZ file) still doesn't work. I even tried flashing an ICS file Engineer Version But same problem...
Can anybody help me. :crying::crying:
blank1134 said:
I need help in returning my device to work. Can anybody help me? It's An LG Optimus LTE (LU6200) Korean version.
Problem:
Touchscreen doesn't work, So the solution that I made was to buy a new digitizer/touchscreen for my device but no response. My phone's touchscreen still doesn't work. (Note: The digitizer/touchscreen i bought worked in other same device but not mine).
Then I tried flashing stock rom (note: KDZ file) still doesn't work. I even tried flashing an ICS file Engineer Version But same problem...
Can anybody help me. :crying::crying:
Click to expand...
Click to collapse
Try flashing Stock rom with new touch screen installed... else check for the ic
As the name suggests, I being a very smart person decided to flash a KDZ for the T-Mobile version at 25% battery. It either died during the flashing or wasn't going to work in the first place, about 80% through the flashing the screen went black and I was left with QHSUSB_BULK. The screen does not turn on, also while charging the LED doesn't turn on. Can anyone help me
P.S, I am with Wind
Did you tried entering the recovery mode?
,,
first of all, can you get back into download mode, or boot into safe mode at all? If so then it's definitely not a hard brick, which means that you might have some hope. So long as you can get it back into download mode, and if you're able to find an appropriate KDZ for your specific model (H636), it might be possible to undo the damage and get your device working again.
But from the sound of it, with the fact that your display doesn't come on, nor does your LED light, it sounds like it's a hard brick. Which means that you're now the proud owner of an LG branded paperweight. If you tried flashing the KDZ from the unbricking guide on the forums, it will only work if your device is already a US T-Mobile or MetroPCS model (H631 or MS631, respectively). Any other model (like the US Boost/Virgin/Cricket models, or non-US variants) will just result in failure, and ultimately a hard brick.
Mines also brick
Hello my lg g stylo also went hard bricked but mine's is a us how can i fix it do i have hope.
Hi I have a canadian LG G stylo (H636) with fido mobile. I want to install a custom ROM as I am sick of the stock ROM. I am pretty new to this area but very excited to learn. Could you provide me the steps and links to the files which I need for this. I appreciate your answers. THanks,
@nicegamer7 There is no known KDZ for the H636 -- you do have a hard bricked device.
@Mike238601 If you have a model that is in the unbrick thread, that has a KDZ available, you can save your device. If there isn't a KDZ available, then you probably have a brick.
Maybe this is useful
runningnak3d said:
@nicegamer7 There is no known KDZ for the H636 -- you do have a hard bricked device.
@Mike238601 If you have a model that is in the unbrick thread, that has a KDZ available, you can save your device. If there isn't a KDZ available, then you probably have a brick.
Click to expand...
Click to collapse
May be check this out for kdz files http://forum.xda-developers.com/android/development/read-trying-to-root-kdz-files-kdz-tmo-t3152531/
http://lg-firmwares.com/lg-h636-firmwares/
Sent from my LG-H636 using XDA-Developers mobile app
AT&T Lg G3 soft brick unable to flash error "Model Information Check FAIL"
Hi,
I have an LG G3 D850 with stock rooted lollipop rom and I edited the build.prop changing the ATT to OPEN. I installed TWRP and while flashing cynogenmod it failed and then it wont go past the boot screen. After that I tried unbricking but the LG root tool says "Model Information Check FAIL".
Can anyone help me with this?
I always changed mine to open never had any probs are u sure u downloaded the rite tot and didnt flash wrong rom
Yes I did. Its just that the model number does'nt show up. Also I am using the KITKAT rom, should I use the Lollipop rom with the same dll file. I used this guide and downloaded the files from here.
http://forum.xda-developers.com/showthread.php?t=2785089
Ok so I figured it out. Apparently for my phone I have to use the dll mention in the link reddit.com/r/LGG3/comments/3ov9x6/need_help_lg_flashtool_model_information_check/
add the https and www
So a few years back i bought an unlocked LG G2 D802 phone from a local retailer. I have always been a Samsung user and never used it and forgot about it. Until recently i remembered about it and as it was out of warranty i decided i should root it and put some custom ROM on it. I rooted it and flashed a custom ROM . But it got stuck on the LG logo at the boot screen. i didn't think of anything at that moment at all. As getting a boot loop is a very common thing in Samsung devices as well and decided i should just stick with a Stock 5.0.2 ROM.
After flashing the stock 5.0.2 i noticed that i lost my imei, baseband etc, and i had forgot to make a backup of the EFS. So now i got suspicious of the phone not being a D802 . i opened it up and sure enough the antenna module had D801/D803 written on it, i proceeded and found the LCD digitizer had D800 written on it and the motherboard had D801 written on it. Now i'm stuck with a useless phone which doesn't have any imei and baseband, i cannot click on the build options to even enable USB debugging mode and i'm not sure of the model.
I should add here that now if i try to flash a stock ROM for d801 with the kdz method i get an error saying i should retry. if i do it with the .tot method it says the device model is d802, which it is not at all. I used the buildprop app and edited the device model to D801 and tried the .tot method again. This time it gave me an error saying that laf.img has been moved and gets stuck in the download mode. I really cannot understand what to do !! please somebody help !