Hi All,
I rotted my "XPERIA J 4.1.2" yesterday through "DooMloRD_Easy-Rooting-Toolkit_v17_pref-event-exploit" then I used "CWN" too. After everything it was working fine till the morning.
In morning I was facing phone hang problem & then I decided to take out the battery to start my phone again, however after plugging the battery again I am not able to switch ON my phone again, it vibrate while trying to switching ON but just after SONY logo one battery signs come & goes immediately & my phone goes into switched off mode again.
*****My phone battery is fully charged - I tried combination of Power & Volume Down Button even Power + Volume + Home but nothing is happening.
Please help
After it`s turn off, You can turn on again (vibrate, Sony logo), or just when You re-insert battery again? If yes, then it`s a resolution problem, try to boot up CWM.
If no luck, re-flash Your ROM again via Flashtool or Fastboot.
im having the same problem
Related
I'm using sony xperia V and after flashing a cyanogenmod rom which installed perfectly, until I select reboot and the screen
turns black and no matter which button combination or whatsoever I can't boot up.
The only things that happen is:
if unplugged, pressing the power button will vibrate the phone and green LED flash for a second
if plugged into computer the green LED flashes for a long time. Holding the volume+ button before plugging in will flash a blue LED light for some time
Both plugged and unplugged, the screen shows nothing at all, which means can't enter recovery mode, safe mode or download mode.
Is there anyway I can solve this? Or I can only buy a new phone or act dumb at the sony store.
Thanks in advance and sorry for any trouble
[Edit]I finally found a way to solve this problem after hours of frustration. Thanks to this amazing website which I couldn't post it here due to being a new member, which I could say it's from a website named androidgadgetmatic, really turned a completely useless brick into a perfectly working phone again. The only problem left (which happened before bricked) is that my phone couldn't read or even find SD card, any help in this area guys?
Hi,
Two days ago I got the official update of jelly bean 4.3 to my Samsung galaxy s3.Last night phone was dropped with in small height. Today morning I switched on the phone its worked fine. But at the evening suddenly my phone was restarted and Samsung Logo Splash Screen (Samsung galaxy S3 GT-I9300T) and Keeps rebooting. So I remove the battery and insert it after a few second. After that the phone worked fine and again the same problem happened.
if I remove the battery, phone switch off. And if I insert the battery again, phone switch on itself (without press power button) and keep restarting.
I try to open the (Home + Volume Up+ power ON) button option. But is not working. If I plug the phone to charge, gray battery shows and again restarting to charge…. (I mean, phone won’t stay in a stage).
If i try (HOme + voulme down + power On) option, phone shows the download mode for 5 seconds and restart again.
So can you please let me know it’s a software problem or hardware problem?
If it’s a software how fix it ? ( I tried the emergency firmware recovery through kies, but kies couldn’t fine my phone).
Thank You.
Hello,
I flashed the latest LRX22C image on my nexus 5 today.Had flashed it clean,wiping data,cache and system etc except the Internal Storage.Then I flashed the SUPERSU 2.37 ZIP .Everything was fine for about 4 hours.Then suddenly when I pressed the power button to turn the screen off,it was not turning off and the "Switch off" mode was popping up instead .Then, when I got a call,it switched off.The phone won't turn on again.It starts,the Google Boot Splash appears and the bootanimation starts for like 2 seconds and it switches off.Same thing for bootloader mode.
Please Help me!
EDIT: Now its turning on by itself and switches off in 2 seconds!
Sounds like a bad power switch to me, but of course that is just my opinion. :good:
sounds like a mech issue.
legit isue
I have the same problem on mine now... Basically my phone powered down around 45%. Battery. At the time i thought it was dead... But it wasnt. When i would plug into external power, either usb or through wireless charging it would power cycle continuously at the android splash screen.... (1 to 2 second intervals - even if i booted into fastboot) Interestingly it would never go to the battery charging mode. But automatically boot on charge... It did this for about 6 hours then i gave up and left it unplugged for a day. I plugged it back in and it started power cycling again, however this time on its third boot it came back to life . thats when i discovered i still had 40% battery... I dont know what exactly made it boot but it did. Oddly also on boot, it started optimising apps and finishing install again. I checked the md5 before I installed the update so no issue there. Since it powered up i have powered the phone off using the power button long push and let the phone power down. After doing this when i plug the phone in to usb charge it goes to the charge screen. No issue. That said, if i try to power up while tethered and charging it will not allow it. It just stays at the charge screen. As soon as i unplug the usb the power button allows the phone to power up and work... When booted up it charges as normal when plugged in. Im convinced there is an issue with the power management drivers or drivers for the button controls. My phone worked fine until the 5.0.1 update was installed. On my nexus 5. Anyone else or just us two? Ive had a hard time finding people posting on this issue.
Hi,
So yesterday I dropped my Tipo, nothing major, dropped it many times before with no issues, the screen stopped working - all lights worked and the phone itself was fine, just the screen remained black. Disassembled the phone and checked connectors etc, no issues from what I could see. I decided as a last ditch attempt to try and flash it back to stock using Flashtool, flashed it with ST21i Tipo_11.0.A.0.16_UK_Generic.ftf, completed with no issues. Disconnected phone and the LED indicator was green, nothing else happened on the phone - it wouldn't turn on etc. Decided to try flashing it again however when starting up Flashtool I noticed the previous ROM used although titled for a Tipo within Flashtool it was listed as ST26i where a Tipo is an ST21i, now everytime I connect the phone to the PC it starts in MTP mode and i'm unable to flash again or do anything, plus I can't enable debugging as the phone doesn't turn on. I've also tried using Xperia Companion however that doesn't pick it up at all.
Anyone got any ideas of what I could try next?
Update
Okay just an update, left the phone and the battery died. When trying to turn it on the red led flashed - usual battery dead indicator. So I decided to try charging it, pressed the volume buttons etc and noticed the green led come on. So managed to flash it again with the correct firmware. It seems to have done something as now when it's plugged in to charge it doesn't boot up but just shows the green led, if I press the volume up button when plugging it in the led will go blue. Anyone know what I can try now? As it seems to just boot into flash mode (green led) when turning it on and nothing else.
Hi there i have this Xperia Z5 Sov32 from January 2019 it was working fine until few days ago the battrey got low at 0% and i plugged it into wall charger after few minutes it have gone upto 17% i pressed the power button to turn the phone on but it gave me a gray screen, before i pressed the power button the charging green bars can be seen, but after i pressed the power button the screen goes grey and no xperia logo screen, then i tried to reset it, by pressing power button + volume up but no use, then tried power + volume down but not working no recovery mode, then i tried power + volume up and volume down, but nothing then i tried the little yellow button near the sim card slot for few seconds, it gave me 3 vibrates but nothing happens after it same gray screen when i try to turn the phone on. then i tried yellow button for 120 seconds, but same gray screen and consistent restarts automatically after few seconds of gray screen, then i tried xperia companion but it is giving me error that my phone is locked, well i cannot unlock the phone if it is not turning on. then i tried sony's orignal flashing tool Emma but that gave me same error phone is locked. then i tried to unlock bootloader with flash tool but no use gave some error which i cannot remember now. then i tried to flash the phone with like 8 different ftf stock files some old some new. but flash tools tells me it have flashed the phone but when i try to turn it on it is giving me same gray screen and restarts every 20 / 30 seconds. and i even tried the Sov32 ftf file downloaded from xperifirm but that gave me error that this bundle is not suitable for your device. all other generic and international versions gave no error and shows successfully flashed. but phone gave same gray screen when i turn it on. and after flashing i tried sony companion and Emma both shows my phone is still locked and not flashed, showing me same old firmware version LOL i dont know what else to do anymore since i have tried every possible trick to fix this damn device. this phone have changed my view of thinking, i have always thought sony is better then all others because i only used sony and motorola all my life. and from past 7 years i have using sony. but if i have to change my phone then i will never buy sony phone again. lost my 3 days on it, trying to fix it. previously i have xperia z and xperia mini pro they were better phones. i still have them. and they are still working. i even flashed xperia mini pro many times no issue. so what should i do now is there any other method left which i have not tried yet ? and btw please dont refer me to use carbon rom or any other rom because this goddam phone is not turning on and not charging. it restarts every few seconds while on charging. so i cannot copy some files into the phone.